27 Ali earned $40,000 in 2021, below the year's maximum pensionable earnings. He was an employee of a chartered bank. Refer to Exhibit 14-3. What was his required contribution to the Canada Pension Plan? A $2,180 B $1,989 C $3,979 D $4,360

Answers

Answer 1

Ali's required contribution can be calculated by multiplying his earnings ($40,000) by the contribution rate (0.0545), which equals $2,180.

Based on the information provided, Ali earned $40,000 in 2021, which is below the year's maximum pensionable earnings.

As an employee of a chartered bank, he is required to contribute to the Canada Pension Plan (CPP). The CPP is a government program that provides income support to retirees.

The required contribution to the CPP is calculated based on a certain percentage of the employee's earnings, up to the maximum pensionable earnings. For 2021, the contribution rate is 5.45%.

Therefore, Ali's required contribution can be calculated by multiplying his earnings ($40,000) by the contribution rate (0.0545), which equals $2,180.

Hence, option A, $2,180, is the correct answer for Ali's required contribution to the Canada Pension Plan.

For more such questions on contribution rate

https://brainly.com/question/24881206

#SPJ11


Related Questions

A large electric utility company spews 62 million tons of greenhouse gases (mostly carbon dioxide) into the environment each year This company has committed to spending $2.1 billion in capital over the next five years to reduce its annual emissions by 6%. More will be spent after five years to reduce greenhouse gases further. D a. What is the implicit cost of a ton of greenhouse gas? 51 b. If the United States produces 2 billion tons of greenhouse gases each year, how much capital must be spent to reduce total emissions by 4% over the next five years based on your answer in Part (a)?
a. The implicit cost of greenhouse gas is $__- per ton (Round to the nearest cent.)

Answers

a. The implicit cost of greenhouse gas is $33.87- per ton (Round to the nearest cent.). $2,709,600,000 must be spent to reduce total emissions by 4% over the next five years

The implicit cost of greenhouse gas:  An implicit cost is an indirect cost that is not visible. When making a decision, it is a cost that has already been incurred but is not visible. It is the chance cost of using a company's or individual's current resources. .

The implicit cost of greenhouse gas can be calculated by dividing the money spent by the amount of greenhouse gases reduced. In this case, the electric utility company is spending $2.1 billion in capital over the next five years to reduce its annual emissions by 6%.

We can calculate the amount of greenhouse gases the company is reducing by multiplying its current greenhouse gases by 6%: 62,000,000 x 0.06 = 3,720,000. Then we can calculate the implicit cost of greenhouse gas by dividing $2.1 billion by 3,720,000:2,100,000,000 / 3,720,000 = 564.51612903Then we convert it to per ton:564.51612903 / 16 = 33.87099557

b. If the United States produces 2 billion tons of greenhouse gases each year, we can find the total amount of greenhouse gases that need to be reduced in order to reach a 4% reduction: 2,000,000,000 x 0.04 = 80,000,000 Then we can calculate the capital needed to reduce 80,000,000 tons of greenhouse gases by using the implicit cost per ton we found in Part (a): 80,000,000 x $33.87 = $2,709,600,000. Therefore, $2,709,600,000 must be spent to reduce total emissions by 4% over the next five years based on our answer in Part (a).

Learn more about implicit cost: https://brainly.com/question/7824689

#SPJ11

For each of the following scenarios, determine if the individual is helped or hurt by inflation.Explain each answer Jack retired five years ago and now lives on a fixed-income annuity and a smallsavings account that pays him 1% interest on the balance. The current inflation rate is
Jill has worked at her current position without a raise for 4 years. Because inflation has risen 5% over the course of the 4 years, she has struggled to pay day-to-day livingexpenses and her house payment. She asked her employer for a raise and he gave hera 6% raise because she is such a good worker.

Answers

Inflation is defined as a rise in the general price level. Inflation, on the other hand, affects people differently depending on their economic situation.

Here is how inflation helps and hurts each of the individuals in the situations given:

Jack retired five years ago and now lives on a fixed-income annuity and a small savings account that pays him 1% interest on the balance. The current inflation rate is Inflation harms Jack since he is a fixed-income earner. The money he gets each month from his annuity is the same, but its worth decreases as inflation rises.

Jack's $1,000 may have been able to buy him a month's worth of food, but with 3% inflation, he can only buy a week's worth of food. Jack's cash in his savings account also has a lower value as inflation rises. As a result, if inflation rises while his money is in the bank, he may lose money by keeping it there.

Jill has worked at her current position without a raise for 4 years. Because inflation has risen 5% over the course of the 4 years, she has struggled to pay day-to-day living expenses and her house payment. She asked her employer for a raise and he gave her a 6% raise because she is such a good worker.Inflation helps Jill because she receives a pay raise. Jill was able to make a strong argument to her employer for a raise due to her excellent work. In the end, Jill's employer gave her a 6% raise, which was enough to keep up with inflation and possibly enhance her standard of living.

To know more about inflation visit :

brainly.com/question/28136474

#SPJ11

The following data pertains to the production area of BE HONEST COMPANY. The production process consists of three processes: cutting, assembling and finishing department. Each unit of product is being processed under the three processes starting from cutting to finishing department. The application of materials in each department is as follows: at the beginning of the process in cutting department; in assembling department, 50% are added at the beginning of the process and another 50% when the percentage of completion is at least 60%; in finishing department, materials are added at the end of the process. Cutting department and finishing departments are both using the FIFO method while the assembling department is using Average method of costing system.
Below is the summary of the cost and units processed by the company:
JANUARY: Cutting Department
Units Started 5,000 units
Current Cost P 10,000 for materials and P 4,000 for conversion cost
FEBRUARY: Cutting Department
IP, beg units 2,000 (40% done)
Units Started 7,000 units
Current Cost P 17,000 for materials and P 9,000 for conversion cost
Assembling Department
Units transferred-in from Previous Department were processed in this department
Current cost P 5,000 for materials and P2,000 for conversion cost
MARCH: Cutting Department
IP, beg units (30% done)
Units Started 4,000 units
Current Cost P 7,000 for materials and P 4,000 for conversion cost
IP, end 3,000 units (60% done)
Assembling Department
IP, beg units 1,000 (40% done)
Units transferred-in from Previous Department 6,000 units
Current Cost P 12,000 for materials and P 5,000 for conversion cost
IP, end 4,000 units (80% done)
Finishing Department
Units transferred-in from Previous Department
Current Cost P 5,000 for materials and P2,000 for conversion cost
Compute for the Following:
Cost Per EUP for materials and conversion cost
JANUARY: Cutting: _________________, _________________
FEBRUARY: Cutting: _________________, _________________
Assembling: _________________, _________________
MARCH: Cutting: _________________, _________________
Assembling: _________________, _________________
Finishing: _________________, _________________
Cost allocated to Finished and Transferred-Out and IP, end
JANUARY: Cutting: _________________, _________________
FEBRUARY: Cutting: _________________, _________________
Assembling: _________________, _________________
MARCH: Cutting: _________________, _________________
Assembling: _________________, _________________
Finishing: _________________, _________________
Prepare Cost Production report for the month of February (Assembling Department)
4. Prepare Cost of Goods Manufactured (Company) for the First Quarter ended March 31, 2016

Answers

The cost production report for the month of February in the Assembling Department, Cost allocated to IP, end: P25,600

To solve the cost production report for the month of February in the Assembling Department, we need to use the weighted average method since this department uses this method in its costing system.

What is the weighted average method?

The weighted average method is a cost accounting system that determines the average cost of each item in stock, based on the costs of the items that remain in stock. It is a way to calculate the cost of goods sold and the cost of goods on hand at the end of a reporting period. It is based on the average of the costs of all items in inventory, taking into account the quantity of each item in stock, which makes it different from other methods of accounting for inventory. It is also called the moving average method since it averages the cost of goods as they are added to inventory.

We can use the following formula to calculate the weighted average cost per unit:

Weighted Average Cost Per Unit = (Total Cost of Units Purchased or Produced + Total Cost of Beginning Inventory) / Total Number of Units Produced or Purchased + Beginning InventoryNow,

let's calculate the cost per EUP for materials and conversion cost and the cost allocated to Finished and Transferred-Out and IP, end for each month as follows:

January:Cost Per EUP for materials: P2.00Cost Per EUP for conversion cost: P0.80Cost allocated to Finished and Transferred-Out:

P14,400Cost allocated to IP, end: P5,600February (Cutting Department):

Cost Per EUP for materials: P3.60Cost Per EUP for conversion cost: P1.80Cost allocated to Finished and Transferred-Out: P84,000Cost allocated to IP, end:P36,400

February (Assembling Department):Cost Per EUP for materials:

P1.64Cost Per EUP for conversion cost: P0.82Cost allocated to Finished and Transferred-Out:

P41,200Cost allocated to IP, end: P16,400March (Cutting Department):Cost Per EUP for materials:

P3.22Cost Per EUP for conversion cost: P1.61Cost allocated to Finished and Transferred-Out: P60,060Cost allocated to IP, end: P25,600

March (Assembling Department):Cost Per EUP for materials: P2.30Cost Per EUP for conversion cost: P1.15Cost allocated to Finished and Transferred-Out: P69,000Cost allocated to IP, end:

P22,600March (Finishing Department):Cost Per EUP for materials: P0.83Cost Per EUP for conversion cost:

P0.42Cost allocated to Finished and Transferred-Out: P6,650Cost allocated to IP, end:

P2,650Now, we need to prepare the cost production report for the month of February in the Assembling Department:

Cost Production ReportAssembling DepartmentFor the Month Ended February 29, 2016

Equivalent Units of ProductionDirect MaterialsConversion CostsUnits to be accounted for:

IP, beginning (40% complete) 1,000 1,000Started and completed during the month 6,000 6,000

To be accounted for 7,000 7,000Less: IP, ending (80% complete) 4,000 4,000Equivalent units of production 3,000 3,000Costs to be accounted for:

Direct MaterialsConversion CostsTotalCosts of beginning WIP P 5,000 P 2,000 P 7,000Current costs 12,000 5,000 17,000Total costs P 17,000 P 7,000 P 24,000Cost per EUP P 1.64 P 0.82Total cost assigned:

P 4,920 P 2,460Total cost assigned to Finished and Transferred-Out:P 4,920Prepare Cost of Goods Manufactured (Company) for the First Quarter ended March 31, 2016:

Cost of Goods Manufactured (Company)For the First Quarter Ended March 31, 2016

Direct MaterialsBeginning Inventory P 0Add: Purchases 63,000Materials available for use 63,000Less:

Ending Inventory 14,800Direct Materials Used 48,200

Conversion CostsBeginning Inventory 0Add: Conversion Costs Incurred 27,000Cost of Units Transferred-In 12,000Total Costs to Account For 39,000Less:

Ending Inventory 12,000Cost of Goods Manufactured (Company) P 27,000

Find out more on  cost production  at

brainly.com/question/13036997.

#SPJ11

J. Jones sells one-half of his partnership to J. Denim for
$5,000 cash. The entry to record this transaction will include a
(debit/credit) to J. Denim, Capital.

Answers

The entry to record the transaction of J. Jones selling one-half of his partnership to J. Denim for $5,000 cash will include a credit to J. Denim, Capital.

When a partner sells a portion of their partnership interest to another partner, it is considered a transaction between the partners and does not affect the partnership's overall financial position. The selling partner, J. Jones, will reduce their capital account since they are selling a portion of their ownership in the partnership.

By crediting J. Denim, Capital, we are increasing J. Denim's capital account to reflect the additional investment made in the partnership. J. Denim is effectively purchasing a portion of the partnership interest from J. Jones, and the cash paid for this purchase increases J. Denim's capital account.

The entry to record the transaction would look like this:

Debit: Cash (for the $5,000 received)

Credit: J. Denim, Capital (to increase J. Denim's capital account)

This entry reflects the transfer of ownership from J. Jones to J. Denim and properly records the transaction in the partners' capital accounts. It is important to note that this transaction does not affect the partnership's overall capital balance, as it represents a reallocation of ownership between the partners.

for more such questions on transaction

https://brainly.com/question/1016861

#SPJ11

A limited liability company's (LLC’s) operating agreement will typically contain provisions for all of the following, except

Multiple Choice

A. the amount and methods of capitalizing the business.

B. assigning personal liability to the members for business debts.

C. the procedure for handling a member’s death or incapacity.

D. the structure of governance and members’ responsibilities.

Answers

The option B, assigning personal liability to the members for business debts is incorrect as it is not a provision in the limited liability company's (LLC’s) operating agreement. It is because limited liability companies are structured to limit the personal liability of the members to the company’s debts and legal liabilities. Thus, the correct answer is B.

The option B, assigning personal liability to the members for business debts is incorrect as it is not a provision in the limited liability company's (LLC’s) operating agreement. It is because limited liability companies are structured to limit the personal liability of the members to the company’s debts and legal liabilities. Thus, the correct answer is B. However, the operating agreement of an LLC outlines the basic rules and regulations that govern the management of the company. The agreement is typically a legally binding contract that outlines the rights, powers, and responsibilities of the LLC's members. The agreement is not required to be filed with the state, although it is advisable to have one. The agreement will typically contain provisions for the following: Capital Contributions: The amount and method of capitalizing the business are outlined in the operating agreement. This provision specifies how much money members are required to contribute to the LLC, how the funds are used, and how profits and losses are allocated.

Management Structure: The agreement specifies the management structure of the LLC. It outlines the responsibilities of the members and managers, as well as the decision-making process. Taxation: The agreement provides for how the LLC will be taxed, either as a partnership or as a corporation. Membership Interests: The operating agreement defines the rights and obligations of each member, including their voting power and allocation of profits and losses. Transfer of Interests: The operating agreement outlines the procedure for transferring a member's interests in the LLC. Death or Incapacity of a Member: The agreement outlines how the LLC will handle a member's death or incapacity. It specifies how the member's interests will be handled and transferred to the remaining members or their heirs in the event of their death or incapacity. Thus, options A, C, and D are all provisions that are typically included in the operating agreement of an LLC, while B is not.

To know more about limited liability company's visit: https://brainly.com/question/9503055

#SPJ11

Thomas is a graduate student who can afford only two varieties of food: canned beans and ramen noodles. If Thomas buys only one type of good he can afford either 100 packs of ramen noodles or 20 cans of beans. If the 10th pack of ramen yields Thomas a marginal utility of 20, what must be the marginal utility of the 6th can of beans for this to be the utility maximizing choice?

I need a graph as well Please!

Please explain each and every step.

Answers

The marginal utility of the 6th can of beans for this to be the utility maximizing choice is 12.

Marginal utility means extra satisfaction or utility received from consuming additional unit of goods.

To determine the marginal utility of the 6th can of beans:

Marginal utility of the 10th pack of ramen noodles = 20 (Given)

Let marginal utility of the 6th can of beans be MU(6).

MU(6) / Price of 6 cans of beans = MU(10) / Price of 10 packs of ramen noodles

MU(6) / (6 cans of beans) = 20 / (10 packs of ramen noodles)

MU(6) / 6 = 20 / 10

MU(6) / 6 = 2

= 2 × 6

= 12

Therefore, the marginal utility of the 6th can of beans must be 12 for this to be the utilize maximum when compared to the marginal utility of the 10th pack of ramen noodles with marginal utility of 20.

To learn more about Utility:

https://brainly.com/question/30841513

#SPJ4

You are paying a series of five constant-dollar (or real-dollar) uniform payments of $1,979.46 beginning at the end of first year. Assume that the general inflation rate is 34.3% and the market interest rate is 34.3% during this inflationary period. The equivalent present worth of the project is: _________

Answers

The equivalent present worth of the project is $3,512.63.

To find the equivalent present worth of the project, we need to adjust the cash flows for inflation and calculate the present value of those cash flows.

Since the general inflation rate is 34.3%, the future value of each payment after one year would be increased by this rate. Therefore, the future value of the five constant-dollar payments would be:

Future Value = $1,979.46 * (1 + 0.343[tex]) ^ 5[/tex] = $6,573.20

Next, we need to discount this future value to its present value using the market interest rate of 34.3%. The present value formula is:

Present Value = Future Value / (1 + Market Interest Rate[tex]) ^ n[/tex]

where n is the number of periods. In this case, n is 5 since we are discounting for 5 years.

Present Value = $6,573.20 / (1 + 0.343[tex]) ^ 5[/tex] = $3,512.63

To know more about Inflation rate refer to-

https://brainly.com/question/31257026

#SPJ11

The human resource model of quality management is the best model of performance excellence.
True
False

Answers

The given statement "The human resource model of quality management is the best model of performance excellence" is subjective and cannot be classified as either true or false.

The correct option is neither 1 nor 2.

However, it is important to understand the human resource model of quality management and its significance in performance excellence.The human resource model of quality management focuses on empowering and training employees to continuously improve their performance, leading to better overall organizational performance.

It emphasizes the importance of employee involvement, motivation, and development in achieving quality management goals.This model recognizes that employees are an organization's greatest asset, and their contribution to quality management is crucial.

It aligns with the philosophy of total quality management, where all employees are responsible for quality, and continuous improvement is essential for success.

Therefore, while the human resource model of quality management may not be the only model of performance excellence, it is certainly one of the most effective models in achieving overall organizational success. The emphasis on employee involvement, motivation, and development leads to increased job satisfaction, employee retention, and overall organizational performance.

For more such questions on management, click on:

https://brainly.com/question/1276995

#SPJ11

Johnson, Inc. has 3.8 million shares of common stock outstanding and is subject to a corporate tax rate of 21 percent. The firm currently has no debt. The expected annual earnings before taxes of $3.5 million in perpetuity and it distributes all of its earnings as dividends at the end of each year. The current required return on the firm’s equity is 10.5 percent. The firm is planning a recapitalization under which it will issue $5 million of perpetual 5 percent debt and use the proceeds to buy back shares.

a. What is the price per share prior to announcement?

b. What is the vlaue of the firm and price per share uder APV method after the recapitalization plan is announced?

c. How may share will be repurchased? What is the price per share after the completion of the repurchase program?

Answers

a) Price per share = $8.76. b) Price per share = $9.05. c)  after the completion of the repurchase program, the price per share will be approximately $7.91.

How to find the price per share prior to announcement

To solve this problem, we can use the Adjusted Present Value (APV) method. Let's calculate the different components:

a. Price per share prior to the announcement:

To calculate this, we need to determine the value of the firm without the recapitalization. We can use the perpetuity formula to find the value of the firm:

Value of the firm = Earnings before taxes / Required return on equity

Value of the firm = $3.5 million / 0.105 (10.5%)

Value of the firm = $33.33 million

Now, we can calculate the price per share:

Price per share = Value of the firm / Number of shares outstanding

Price per share = $33.33 million / 3.8 million

Price per share = $8.76

b. Value of the firm and price per share under the APV method after the recapitalization plan is announced:

In this case, we need to consider the tax shield from the interest expense of the debt. Let's calculate the value of the tax shield first:

Tax shield = Tax rate * Debt

Tax shield = 0.21 (21%) * $5 million

Tax shield = $1.05 million

Now, we can calculate the value of the firm:

Value of the firm = Value of the firm without debt + Value of the tax shield

Value of the firm = $33.33 million + $1.05 million

Value of the firm = $34.38 million

Next, we can calculate the price per share:

Price per share = Value of the firm / Number of shares outstanding

Price per share = $34.38 million / 3.8 million

Price per share = $9.05

c. Number of shares repurchased and price per share after the completion of the repurchase program:

To calculate the number of shares repurchased, we need to use the proceeds from the debt issuance divided by the price per share after the announcement:

Number of shares repurchased = Debt issued / Price per share after the announcement

Number of shares repurchased = $5 million / $9.05

Number of shares repurchased ≈ 552,486 shares

Now, we can calculate the price per share after the completion of the repurchase program:

Price per share = Price per share after the announcement * (1 - (Number of shares repurchased / Number of shares outstanding))

Price per share = $9.05 * (1 - (552,486 / 3.8 million))

Price per share ≈ $7.91

So, after the completion of the repurchase program, the price per share will be approximately $7.91.

Learn more about share at https://brainly.com/question/26128641

$SPJ4

at common law, the person who used a symbol or mark to identify a business or product was protected in the use of that trademark. true false

Answers

True. At common law, the person who used a symbol or mark to identify a business or product was protected in the use of that trademark.

What is a trademark?

A trademark is a unique symbol, logo, phrase, word, or a combination of these that distinguishes the goods and services of one company from those of another. It can be a brand, a logo, or a slogan that makes it unique from others. Trademarks can be registered, which gives them the status of property that is owned by the registrant.

Why is a trademark important?

A trademark is crucial because it provides legal protection to the brand owner. It prohibits others from using the same or similar mark without permission. If a competitor or other third party uses a trademark, the owner of the trademark can bring a lawsuit against them for infringement of the trademark.

Therefore, if someone uses a symbol or mark to identify a business or product, they will be protected in the use of that trademark. This statement is true.

Learn more about trademark here:-

https://brainly.com/question/11957410

#SPJ11

A farmer focusing on the production of eco-friendly chicken eggs collects the following data about his output. In a sample of 50 eggs, the farmer finds the average egg to weigh 47 grams. The standard deviation of the egg weight is 2 grams and the distribution of weights resembles a normal distribution reasonably closely. The farmer can sell the eggs to a local distributor. However, they have to be in the interval between 44 grams and 50 grams (i.e., the lower specification limit is 44 grams and the upper specification limit is 50 grams). a. What is the capability score of the eco-friendly chicken egg operation? b. What percentage of the produced eggs fall within the specification limits provided by the local distributor? c. By how much would the farmer have to reduce the standard deviation of the operation if his goal were to obtain a capability score of Cp=2/3 (i.e., get 4.5% defects)?

Answers

a. Capability score: 0.5

b. Percentage within limits: Approximately 99.85%

c. Standard deviation reduction: Approximately 0.51 grams.

To compute the ability score and level of eggs inside as far as possible, we can utilize the interaction capacity record, Cp.

a. The capacity score (Cp) is determined by partitioning the resistance width (the distinction between the upper and lower particular cutoff points) by multiple times the standard deviation:

Cp = (USL - LSL)/(6 * standard deviation)

For this situation, the upper detail limit (USL) is 50 grams, the lower particular cutoff (LSL) is 44 grams, and the standard deviation is 2 grams. Connecting these qualities to the recipe, we get:

Cp = (50 - 44)/(6 * 2) = 6/12 = 0.5

Accordingly, the ability score of the eco-accommodating chicken egg activity is 0.5.

b. To decide the level of eggs inside as far as possible, we want to work out the region under the ordinary circulation bend between the cutoff points. We can utilize a standard typical conveyance table or a factual programming to track down this worth. Expecting a symmetric conveyance, we can find the level of eggs inside as far as possible as follows:

Rate inside limits = Rate underneath USL - Rate beneath LSL

Utilizing a standard typical conveyance table or programming, we track down the accompanying probabilities:

Rate underneath USL = Rate under 50 grams = 100 percent (as far as possible is at the tail of the appropriation)

Rate underneath LSL = Rate under 44 grams = around 0.15% (from the table)

In this way, the level of eggs inside as far as possible is roughly 100 percent - 0.15% = 99.85%.

c. To accomplish a capacity score (Cp) of 2/3 or 0.67 (which compares to 4.5% deformities), we can revise the Cp recipe and tackle for the expected standard deviation:

standard deviation = (USL - LSL)/(6 * Cp)

Utilizing the given upper and lower detail limits (50 grams and 44 grams) and the ideal Cp of 0.67, we can compute the necessary standard deviation:

standard deviation = (50 - 44)/(6 * 0.67) = 6/4.02 ≈ 1.49 grams

Thusly, the rancher would have to diminish the standard deviation of the activity to roughly 1.49 grams to accomplish a capacity score of Cp = 2/3 (4.5% deformities).

To learn more about Standard deviation, refer:

https://brainly.com/question/30304439

#SPJ4

GOODS AND SERVICE TAX For the following consider whether it is a Taxable Supply, Input Taxed or GST Free. Calculate net GST payable position. Receipts $ 660,000 Sales of Motor Vehicles 35,000 Rent received on residential property 5,000 Interest on Deposits 1,100,000 Sale of commercial building 6,600 Employee contribution for provision of car Payments $ 330,000 Motor Vehicles purchased 10,500 Maintenance cost on the residential apartments 150,000 Salary paid to employees 1,500 Rates 400 Water bill 55,000 Repairs to motor vehicles please provide the sectin under which the calculation are made and also case law example if applicable

Answers

The Goods and Services Tax (GST) is a consumption tax imposed on the supply of goods and services in Malaysia. GST is an indirect tax that is imposed on the final consumer and is collected at each stage of the production cycle.
In this case, the calculation of net GST payable position is as follows:

Sales of Motor Vehicles = Taxable Supply
Net GST payable = 6/106 x 35,000 = 1,571.70

Rent received on residential property = Input Taxed
No GST payable.

Interest on Deposits = Input Taxed
No GST payable.

Sale of commercial building = Taxable Supply
Net GST payable = 6/106 x 6,600 = 373.58

Employee contribution for the provision of car = Taxable Supply
Net GST payable = 6/106 x 0 = 0

Total GST payable = 1,571.70 + 373.58 + 0 = 1,945.28

Motor Vehicles purchased = Taxable Supply
Input Tax credit = 6/106 x 10,500 = 594.34

Maintenance cost on residential apartments = Input Taxed
Input Tax credit = 0

Salary paid to employees = Taxable Supply
Input Tax credit = 6/106 x 1,500 = 84.91

Rates = GST Free
No Input Tax credit.

Water bill = GST Free
No Input Tax credit.

Repairs to motor vehicles = Taxable Supply
Input Tax credit = 6/106 x 0 = 0

Total Input Tax credit = 594.34 + 84.91 + 0 + 0 = 679.25

Net GST payable = GST payable - Input Tax credit = 1,945.28 - 679.25 = 1,266.03

The section under which the calculation is made is under Section 33 of the Goods and Services Tax Act 2014.

There is no case law example applicable.

To know more about position visit:

https://brainly.com/question/12650352

#SPJ11

The partnership of Rhino and Chris agree that the partners will
share profits and losses in a 75% to 25% ratio, respectively.
Assets are sold for a gain of $10,000 The gain will be create a
(debit/cre

Answers

When Rhino and Chris agreed that they will share profits and losses in a 75% to 25% ratio, respectively, they formed a partnership. The entries that will be made are as follows:Asset Account Dr. $10,000Partner's capital account (Rhino) Cr. $7,500Partner's capital account (Chris) Cr. $2,500

In such a case, the partnership agreement will outline how the partners are to split profits, losses, and any other gains that may arise.The gain from the sale of assets for $10,000 will be credited to the partnership's account. This is because the asset was sold for more than it was bought for, meaning the partnership gained from the sale. A credit to an account indicates that an amount has been added to it. The profit that was made from the sale of the assets is the partnership's gain. It should be shared according to the agreed ratio, which is 75% to Rhino and 25% to Chris.

In this regard, Rhino's capital account should be credited with 75% of the gain, which is $7,500, while Chris's capital account should be credited with 25% of the gain, which is $2,500.To balance the entries, the asset account will be debited. This is because it is no longer in the partnership's possession, having been sold. A debit to an account indicates that an amount has been removed from it.

Therefore, the entries that will be made are as follows: Asset Account Dr. $10,000Partner's capital account (Rhino) Cr. $7,500 and Partner's capital account (Chris) Cr. $2,500

For more such questions on profits and losses , click on:

https://brainly.com/question/29785271

#SPJ11

regory bought 500 shares of stock at a price of $60 per share. He later sold his stock at a price of $56. What was his total return on his investment?
A) $4 capital gain
B) $2,000 capital gain
C) $26,500 capital gain
D) $60 capital loss
E) $2,000 capital loss

Answers

Total return on investment = – $2000.Therefore, Gregory's total return on his investment is $2000 capital loss. Hence, option E is correct.

Gregory bought 500 shares of stock at a price of $60 per share. He later sold his stock at a price of $56. What was his total return on his investment. The answer to the question is option E) $2,000 capital loss.Explanation:We are given that Gregory bought 500 shares of stock at a price of $60 per share. Therefore, the amount invested by him is

500 × 60

= $<<500*60

=30000>>30000.

He later sold his stock at a price of $56. Therefore, the amount received by him is

500 × 56

= $<<500*56

=28000>>28000

.Total return on investment = Selling price – Purchase price Total return on investment

= 28000 – 30000

.Total return on investment

= – $2000

.Therefore, Gregory's total return on his investment is $2000 capital loss. Hence, option E is correct.

To know more about Gregory's visit:

https://brainly.com/question/30287134

#SPJ11

Discussion of Torts 10 pts In the business environment, tort causes of action can put a company out of business. It important for the astute business owner to understand the risk the company is taking

Answers

In the business environment, a tort refers to a wrongful act that results in injury to an individual or damage to property. It is a civil offense, as opposed to a criminal offense. Tort causes of action can put a company out of business because they may result in high financial settlements or judgments.

There are several types of torts that a business owner should be aware of. These include intentional torts, negligence, and strict liability. Intentional torts occur when an individual or business intentionally commits an act that results in injury or damage. Examples include assault, battery, and defamation. Negligence occurs when an individual or business fails to exercise reasonable care and causes injury or damage.


In conclusion, understanding tort law and the risks associated with it is critical for any business owner. By taking steps to mitigate those risks, a business owner can protect their company and ensure its long-term success.

To know more about environment visit:

https://brainly.com/question/5511643

#SPJ11

Choose an industry and explain how the Covid-19 crisis impacted the size of operations of firms in this industry. Did this industry "recover" and what is the current state of the industry?

Answers

The Covid-19 crisis has had a significant impact on the size of operations of firms in the airline industry. Most airlines have seen a drastic decrease in demand for air travel, which has resulted in many airlines cutting down on the number of flights they operate and reducing the size of their fleet.

This has led to a significant reduction in the size of operations of firms in this industry, as they have had to lay off employees and cut down on expenses in order to survive. According to the International Air Transport Association (IATA), the global airline industry is expected to lose around $314 billion in revenue due to the Covid-19 crisis in 2020.

Many airlines have resorted to borrowing money and taking out government loans to stay afloat during the crisis. Some airlines have even filed for bankruptcy or gone out of business entirely. However, the industry has started to show some signs of recovery as restrictions on travel have begun to ease in some parts of the world.

To know more about Covid-19 visit:-

https://brainly.com/question/32508937

#SPJ11

The greater the MPS, the greater the multiplier. OA) true B) false

Answers

The statement that "the greater the MPS (Marginal Propensity to Save), the greater the multiplier" is incorrect. In fact, the opposite is true. The multiplier is determined by the Marginal Propensity to Consume (MPC), not the MPS.

The MPC represents the portion of each additional dollar of income that households spend rather than save. The MPS, on the other hand, represents the portion of each additional dollar of income that households save rather than spend.

The multiplier is calculated as the reciprocal of the MPS. It is derived from the concept that an injection of spending into the economy leads to subsequent rounds of additional spending as income is circulated and re-spent. The higher the MPC, the greater the multiplier because more of the initial injection is consumed, leading to more subsequent rounds of spending.

Conversely, the higher the MPS, the smaller the multiplier. If households have a high propensity to save, they will save a larger proportion of each additional dollar of income, leaving less for consumption and subsequent rounds of spending. This results in a smaller multiplier effect.

Know more about Marginal Propensity to Save here:

https://brainly.com/question/16820522

#SPJ11

i
need answer please
10 Define and discuss brands, addressing the issues of whether or not they are rational, how long they typically last, and if they are viable in the Internet era.

Answers

Brands are not solely rational constructs but encompass both rational and emotional aspects. Their lifespan can vary, and they play a crucial role in the Internet era. Brands that effectively adapt to the digital landscape and continuously deliver value to their customers can remain viable and successful in the ever-changing business environment.

Brands can be defined as distinctive symbols, names, logos, designs, or other elements that differentiate and identify a specific product, service, or company from its competitors. They represent the overall perception and reputation of a business in the minds of consumers.

While brands can have rational elements such as product features, quality, and functional benefits, they also encompass emotional and psychological associations. Consumers often form connections and attachments to brands based on their experiences, values, and perceptions. This emotional aspect adds depth and meaning to the brand beyond pure rationality.

The lifespan of a brand can vary significantly. Some brands have endured for decades or even centuries, demonstrating their resilience and ability to adapt to changing consumer preferences and market dynamics. However, other brands may experience a shorter lifespan due to factors such as intense competition, shifts in consumer preferences, or failure to innovate and meet evolving customer needs.

In the Internet era, brands have become more important than ever. The internet has expanded the reach and influence of brands, allowing businesses to connect with global audiences and engage in direct communication with customers. Online platforms provide opportunities for brand building, storytelling, and fostering customer loyalty.

At the same time, the internet has also posed challenges for brands. The abundance of information and choices available online has increased competition and made it easier for consumers to compare and switch between brands. Brands need to adapt to the digital landscape by developing a strong online presence, delivering seamless customer experiences across multiple channels, and utilizing digital marketing strategies to build and maintain brand relevance.

for more question on lifespan

https://brainly.com/question/31467348

#SPJ11

According to the cost-benefit analysis for pollution control,
should a firm be required to remove 100% of the pollution it
made?
A. Yes, since justice requires that all humans have the right to
live a

Answers

A firm should be required to remove a reasonable amount of pollution, based on the results of the cost-benefit analysis.

The cost-benefit analysis for pollution control determines the value of pollution control strategies and their costs. To determine the best pollution control level, the costs of pollution control need to be weighed against the benefits it provides.  

Therefore, it is not always necessary for a firm to remove 100% of the pollution it creates.

What is cost-benefit analysis for pollution control?

A cost-benefit analysis is a tool used to determine whether or not the benefits of a specific action outweigh the costs of that action.

The cost-benefit analysis for pollution control determines the value of pollution control strategies and their costs. The costs of pollution control refer to the expenses incurred when implementing pollution control measures.

The benefits of pollution control, on the other hand, include avoided pollution-related health effects, higher quality of life, and better economic outcomes.

According to the cost-benefit analysis for pollution control, should a firm be required to remove 100% of the pollution it made?It is not always necessary for a firm to remove 100% of the pollution it creates.

The level of pollution control that is necessary for a firm to implement should be determined through the cost-benefit analysis.

This level will vary based on the specific pollution-related impacts of the firm's activities, the costs of pollution control strategies, and the benefits of those strategies.

Therefore, a firm should be required to remove a reasonable amount of pollution, based on the results of the cost-benefit analysis.

Learn more about pollution control from the given link

https://brainly.com/question/31162455

#SPJ11

I Calculate the variance in the scenario below and state whether it is positive or negative, favourable or adverse. Explain two challenges of setting budgets. Budgeted profit: £200,000; Actual profit: £410,000 (6 marks)

Answers

To calculate the variance, you will need to deduct the actual result from the budgeted result, then divide that difference by the budgeted amount. That is,



Variance = (Actual Profit - Budgeted Profit) / Budgeted Profit
Variance = (410,000 - 200,000) / 200,000
Variance = 210,000 / 200,000
Variance = 1.05 or 105%

1. Unrealistic expectations: When budgeting, some managers set goals that are too high or unrealistic. When goals are set too high, it can create unnecessary pressure on the team to meet the goals, which can lead to burnout, job dissatisfaction, and even a high employee turnover rate. Unrealistic expectations can also lead to employees cutting corners, taking shortcuts, or disregarding rules to achieve the set goals.

To know more about variance visit:

https://brainly.com/question/13708253

#SPJ11

Jolie earned $205 for babysitting in one month. She spent d dollars going to a water park with some friends. After going to the water park, Jolie had $160 remaining.
a. Jolie spent $205 - d dollars at the water park.
b. Jolie spent $160 + d dollars at the water park.
c. Jolie spent $205 + d dollars at the water park.
d. Jolie spent $160 - d dollars at the water park.

Answers

To get the answer to the question, we'll apply basic arithmetic. Given that Jolie earned $205 and spent d dollars at a water park with some friends.

After going to the water park, Jolie had $160 remaining.

To find the amount spent at the water park, we'll subtract the amount remaining from the amount earned to get the total amount spent.205 - d = 160. The next step is to isolate d by bringing the 205 to the right side of the equation by subtracting it from both sides: 205 - d - 205 = 160 - 205 - d- d = -45. Therefore, the amount spent is $45. To check this, we add the amount spent ($45) to the amount remaining ($160).$45 + $160 = $205This is the amount earned that Jolie earned so our answer is: Jolie spent $45 at the water park.

Therefore the answer is option a. Jolie spent $205 - d dollars at the water park.

To learn more about amount earned, visit here

https://brainly.com/question/20603560

#SPJ11

Which of the following scenarios could trigger the Reserve Bank of Australia (RBA) to increase the official cash rate?

a.The medium-term inflation rate in Australia is predicted to rise above 2% but still sit below 3% p.a.

b.The overheating economy which is due to the rapid recovery in economic activity and ongoing fiscal stimulus.

c.The medium-term inflation rate in Australia is predicted to fall below 2%

d.The contracting economy due to the impact of the global pandemic

Answers

Answer : The Reserve Bank of Australia (RBA) could increase the official cash rate due to the overheating economy which is due to the rapid recovery in economic activity and ongoing fiscal stimulus.

Explanation : The Reserve Bank of Australia (RBA) could increase the official cash rate due to the overheating economy which is due to the rapid recovery in economic activity and ongoing fiscal stimulus.The Reserve Bank of Australia (RBA) could increase the official cash rate if the economy is overheating due to the rapid recovery in economic activity and ongoing fiscal stimulus.

The Reserve Bank of Australia (RBA) has a duty to maintain economic stability by regulating the official cash rate. The cash rate is the rate at which financial institutions borrow money from the Reserve Bank of Australia. To curb inflation and sustain economic growth, the Reserve Bank of Australia (RBA) could increase the official cash rate.

The overheating economy scenario could lead to the Reserve Bank of Australia (RBA) increasing the official cash rate because the inflation rate could be high in such an economic environment. Hence, the answer to the question is option B.A scenario in which the medium-term inflation rate in Australia is predicted to rise above 2% but still sit below 3% p.a. may not be enough to trigger an increase in the official cash rate, as it could be seen as a healthy inflation rate that the Reserve Bank of Australia (RBA) wants to maintain.

A contracting economy due to the impact of the global pandemic is also not enough to trigger an increase in the official cash rate as the Reserve Bank of Australia (RBA) would need to implement policies that stimulate the economy, such as lowering the official cash rate, in this scenario.

Learn more about Reserve Bank of Australia (RBA) here https://brainly.in/question/46404439

#SPJ11

When the social value and the private value are equal to one another but social cost is higher than the private cost, the private market outcome will be _than the outcome desired by the higher, producers O higher, society O lower, society O None of the other alternatives are correct

Answers

When the social value and the private value are equal to one another but social cost is higher than the private cost, the private market outcome will be lower than the outcome desired by the society. The correct answer is option C.

When the social value and the private value are equal to one another but social cost is higher than the private cost, the private market outcome will be lower than the outcome desired by the higher, society because the private market does not take into account the negative externalities of economic activities.

In other words, when the social value and private value are equal, it suggests that the private benefits of the production activity are equal to the social advantages. However, when the social cost is higher than the private cost, it suggests that the private market is not considering the negative externalities of the economic activity.

This is because the private market is only concerned with the private benefits and costs associated with the economic activity, whereas the social cost is borne by society as a whole.

In conclusion, when social cost is higher than the private cost, the private market outcome will be lower than the outcome desired by the society.

Hence, option C is the right answer.

To know more about social cost, visit https://brainly.com/question/13574768

#SPJ11

Prof Irias sues Prof. McGuire for trespass of property in a
state trial court and loses. Prof Irias
can insist that the United States Supreme Court hear her
case
can plead her case before

Answers

When Prof Irias sues Prof. McGuire for trespass of property in a state trial court and loses, she cannot insist that the United States Supreme Court hear her case. Nonetheless, she can plead her case before the federal court by raising a constitutional issue, which requires that the US Supreme Court intervene in the dispute.

The US Supreme Court is the highest court in the United States, and it has both appellate and original jurisdiction. The original jurisdiction provides the Supreme Court with the authority to settle disputes between states, while the appellate jurisdiction involves hearing appeals from lower federal courts and state courts that involve federal law or the Constitution.

The US Supreme Court has a discretionary authority to decide which cases to hear. When a state court decides a case involving a federal question, a party who is aggrieved by the decision may appeal to the Supreme Court for review.

In this case, Prof Irias would have to appeal to the US Supreme Court if her case involved a federal question, but the court has the discretion to deny or grant her appeal.

To know more about trial court visit:

https://brainly.com/question/14839358

#SPJ11

Choose any country in the world, other than the U. S., and briefly explain that country’s current laws that would affect the LGBTQ community.

Answers

One of the countries that can be discussed to answer this question is India. India has a rich and diverse culture, and it is considered a very conservative country in many ways.

It is one of the few countries in the world that still criminalizes homosexuality. It was in 2018 when the Supreme Court of India declared section 377 of the Indian Penal Code unconstitutional, thereby decriminalizing homosexuality in the country.However, despite this landmark decision, the LGBTQ+ community still faces discrimination and marginalization in various forms. There is still a lack of legal recognition for same-sex couples in India. Same-sex marriage or civil unions are not legally recognized in India, and there are no laws protecting the rights of LGBTQ+ individuals regarding housing, healthcare, employment, and other areas.

Transgender persons in India are also facing various issues. There is a lack of recognition for their gender identity, and they face discrimination in society. Despite the situation of the LGBTQ community, there has been progress in recent years as more than 100 organizations working for the welfare of the community have emerged. These organizations provide resources for the community to support them with legal issues, HIV/AIDS awareness, and other services.

TO know more about rich visit:

https://brainly.com/question/30379609

#SPJ11

The Deputy Chief Executive (DCE) is faced with a decision situation that can be described as a situation of 'uncertainty. Which Decision-making model will be used in this decision situation? [Explanation is not required] Use the editor to format your answer

Answers

Te Deputy Chief Executive (DCE) is faced with a decision situation that can be described as a situation of 'uncertainty. The Decision-making model will be used in this decision situation is uncertainty decision-making model.

When it comes to decision-making, uncertainty is one of the many decision-making situations. The decision-making process in uncertain circumstances is not straightforward. Decision-making under uncertainty entails determining the likelihood of potential results and weighing their advantages and disadvantages in light of the available data, making the most probable decision possible. Uncertainty is a decision-making model that is used in a decision-making situation.

In situations where the probability of an event is unknown, the uncertainty decision-making model is used to make decisions. When making a decision under conditions of uncertainty, decision-makers use their judgement, best guess, or previous experience to make the best possible decision.It's also worth noting that decision-makers may choose to gather additional information to reduce the level of uncertainty, which will help them make more informed decisions. In summary, the decision-making model that will be used in the decision situation of uncertainty is the uncertainty decision-making model.

Learn more about decision-making at :

https://brainly.com/question/3919020

#SPJ11

Outline two possible problems to HSN of many employees leaving.​

Answers

not having enough employees to do the work or something

biggest disadvantage of a process layout is that it creates a dull, repetitive jobs

Answers

Materials must regularly be transported both forward and backward. Material handling becomes challenging to automate. Conveyor belts, chutes, and other fixed route material handling equipment cannot be employed, thus material handling is highly expensive.

High expenses associated with in-process inventories might be a drawback of a product architecture. With a product layout, there is little in-process inventory. 25. In cellular production, tools and machines are organised into cells based on their kind (for example, all grinders are placed in one cell).

This design is frequently appropriate for non-repetitive tasks. ADVERTISEMENTS: Facilities that perform the same sort of function are grouped together, such as all the lathes in one location and the drill machines in another.

To learn more about product, click here.

https://brainly.com/question/31815585

#SPJ4

Katie likes to paint and sit in the sun. Her utility function is U(P, S) = 3PS + 6P, where P is the number of paint brushes and S is the number of straw hats. The price of a paint brush is $1 and the price of a straw hat is $5. Katie has $50 to spend on paint brushes and straw hats. Solve Katie's utility-maximization problem using a Lagrangian. How much does Katie's utility increase if she receives an extra dollar to spend on paint brushes and straw hats?

Answers

Katie's utility will rise by 15 if she receives an extra dollar to spend on paintbrushes and straw hats.

In order to solve Katie's utility-maximization problem using a Lagrangian, the following steps should be followed:

Step 1: The problem's utility function is

U(P, S) = 3PS + 6P.

Katie has $50 to spend on paint brushes and straw hats, and the price of a paintbrush is $1 and a straw hat is $5.

Step 2: The utility function, subject to the budget constraint, will be optimized.

3PS + 6P is the utility function, and the budget constraint is

P + 5S = 50 or P = 50 - 5S.

Step 3: In this stage, the Lagrangian formula is used to solve the issue.

L = 3PS + 6P - λ(P + 5S - 50).

Taking the derivative of the equation with respect to P, we get:

3S - λ = 0 or λ = 3S.

Taking the derivative of the equation with respect to S, we get:

3P - λ5 = 0 or λ = 15P/3.

We will equate the two expressions for λ and solve for S.

3S = 15P/3S = 5P, and

S = 5P/3.

Katie's budget constraint equation,

P + 5S = 50, is used to solve for P.

P + 5(5P/3) = 50 or

P = 10.

Therefore, S = 50/3.

Step 4: Katie's utility function will be calculated using these values.

U(10, 50/3) = 3(10)(50/3) + 6(10) = 220.

Step 5: The partial derivative of the Lagrangian function

L = 3PS + 6P - λ(P + 5S - 50) with respect to λ is as follows:

P + 5S - 50 = 0.

The marginal utility of an additional dollar is the value of the derivative: λ, which is 15 (because λ = 3S, and S = 50/3).

To know more about utility visit :

brainly.com/question/32296953

#SPJ11

You own a stock portfolio invested 30 percent in Stock Q, 35 percent in Stock R, 10 percent in Stock S, and 25 percent in Stock T. The betas for these four stocks are 1.0, 0.7, 1.4, and 0.8, respectively. What is the portfolio beta? (Do not round intermediate calculations. Round your answer to 3 decimal places.)

Answers

When the betas for these four stocks are 1.0, 0.7, 1.4, and 0.8, respectively the portfolio beta is 0.885

The question requires us to find out the portfolio beta for a stock portfolio invested in Stock Q, Stock R, Stock S, and Stock T with the given beta values.

So, let us begin with the steps-  to find the portfolio beta

Step 1: Multiply beta value of each stock by its weight. That is,

`Stock Q = 1.0 × 0.30

= 0.300`

`Stock R = 0.7 × 0.35

= 0.245

``Stock S = 1.4 × 0.10

= 0.140

``Stock T = 0.8 × 0.25

= 0.200`

Step 2: Add the product of step 1 to obtain the portfolio beta.

`Portfolio beta = 0.300 + 0.245 + 0.140 + 0.200

= 0.885`

Therefore, the portfolio beta is 0.885.

To know more about Portfolio visit:

brainly.com/question/18760065

#SPJ11

Other Questions
"Crest is a cavity fighter" is an example of a positioning strategy based on product A. price/quality B. class C. attributes D. users A 78-year-old patient is in the recovery room after having a lengthy surgery on his hip. As he is gradually awakening, he requests pain medication. Within 10 minutes after receiving a dose of morphine sulfate, he is very lethargic and his respirations are shallow, with a rate of 7 breaths/minute. The nurse prepares for which priority action at this time?a. Close observation of signs of opioid toleranceb. Assessment of the patients pain levelc. Administration of naloxone (Narcan)d. Immediate intubation and artificial ventilation If a solid steel ball is immersed in an eight cm. diameter cylinder, it displaces water to a depth of 2.25 cm. the radius of the ball is: which of the following functions represent exponential decay? y = -2 x only 0.015 l of a 0.880 m barium nitrate solution is available to mix with 0.024 l sample of a 1.36 m potassium sulfate solution. the precipitate baso4 is centrifuged, collected, dried, and found to have a mass of 2.52 g . what are the theoretical yield, and the percent yield. (answer: 3.08 g, 81.8%) In central NY climate, it might be difficult to read the writing on a headstone in a cemetery if the headstone is made of: a. rhyolite b. limestone c. gabbro C O d. diorite e. granite What are the characteristics of the Global Competition ? How itaffects the world as a whole? Which of the following is NOT one of the advantages associated with multinational corporations? O the capacity to tap into new technology from around the world O significantlabor savings, even in highly unionized countries the ability to shift production from one plant to another as market conditions change a positive exchange rates the ability to sidestep regulatory problems Machine hours are used to absorb overheads in a production cost centre. Overheads allocated and apportioned to the cost centre are: $ Allocated 13,122 Apportionned 7,920 Reapportioned from service cost centers 2,988 216,000 units of product are manufactured at a rate of 120 units per machine hour. What is the overhead absorption rate per machine hour? Performance Products Corporation makes two products, titanium Rims and Posts. Data regarding the two products follow:DirectLabor-Hoursper unit AnnualProductionRims 0.30 27,000 unitsPosts 0.50 75,000 unitsAdditional information about the company follows:Rims require $12 in direct materials per unit, and Posts require $10.The direct labor wage rate is $20 per hour.Rims are more complex to manufacture than Posts and they require special equipment.The ABC system has the following activity cost pools:Estimated ActivityActivity Cost Pool Activity Measure EstimatedOverheadCost Rims Posts TotalMachine setups Number of setups $ 30,000 100 50 150Special processing Machine-hours $ 121,500 6,000 0 6,000General factory Direct labor-hours $ 756,000 9,000 45,000 54,000Exercise 4-8 Part 1Required:1. Compute the activity rate for each activity cost pool. (Round your answers to 2 decimal places.)Machine Setups. per setupSpecial Processing per MHGeneral Factory per DLHDetermine the unit product cost of each product according to the ABC system. (Do not round intermediate calculations. Round your final answers to 2 decimal places.)Unit product cost of rimsunit product cost of posts approximately what year did paul enter the capital city of athens Carter, Inc. paid salaries expense of $292,000 during 2016. However, additional salaries of $14,000 had been earned by employees, but not paid or recorded at December 31, 2016 by Carter. A) What is the effect on the accounting equation of the adjusting entry necessary at December 31, 2016? 6. Calzone, Inc. signs a 9% 4-month $50,000 loan with Reliable Bank on October 1, 2016. Determine the effects on the accounting equation for the following items: A. The signing of the loan on October 1, 2016 by Calzone, Inc. B. The recording of the interest on December 31, 2016 by Calzone, Inc. Which step of an ethical analysis is designed to enable a manager to obtain guidance or insights from other managers? Multiple Choice a) determining who is affected. b) listing options. c) searching for precedents. d) making a decision. The original law of effect stated that behaviors leading to a(n) ____ are ____. a. satisfactory state of affairs; stamped in b. reinforcer; stamped in c. positive reinforcer; strengthened d. unconditioned stimulus; stamped out The currency deposit ratio is 0.5, the required reserve ratio is 0.25. The bank holds the required reserves, plus a little extra in case of a large withdrawal egual to e(R)=0.5-2R.Where R is the interest rate and it is equal to 12.5. The money supply is 600. Using the money multiplier approach calculate how many pounds worth of bonds would the Bank of England have to buy/sell in order to increase the money supply to 900? a. Sell bonds for an amount equal to $200. b. Buy bonds for an amount equal to $200. c. Buy bonds for an amount equal to $40o. d. Sell bonds for an amount egual to $250. LG Company is considering the purchase of a new machine. Its invoice price is $123,000, freight charges are estimated to be $3,000, and installation costs are expected to be $5,000. Salvage value of the new machine is expected to be zero after a useful life of 4 years. Existing equipment could be retained and used for an additional 4 years if the new machine is not purchased. At that time, the salvage value of the equipment would be zero. If the new machine is purchased now, the existing machine would be sold for $5,000. LGs accountant, Ethan Ng, has accumulated the following data regarding annual sales and expenses with and without the new machine.Without the new machine, LG can sell 10,000 units of product annually at a per unit selling price of $100. If the new unit is purchased, the number of units produced and sold would increase by 25%, and the selling price would remain the same.The new machine is faster than the old machine, and it is more efficient in its usage of materials. With the old machine the gross profit rate will be 28.5% of sales, whereas the rate will be 30% of sales with the new machine. (Note: These gross profit rates do not include depreciation on the machines. For purposes of determining net income, treat depreciation expense as a separate line item.). The old machine breaks down three to four times a year. The staff had requested the management to buy a new machine as the old machine is challenging to operate.Annual selling expenses are $160,000 with the current equipment. Because the new equipment would produce a greater number of units to be sold, annual selling expenses are expected to increase by 10% if it is purchased.Annual administrative expenses are expected to be $100,000 with the old machine, and $112,000 with the new machine.The current book value of the existing machine is $40,000. LG uses straight-line depreciation.LGs management has a required rate of return of 15% on its investment and a cash payback period of no more than 3 years.Additional information:The company provides jobs to many local citizens where they are located. Having the new machine will reduce the hiring of new employees in the coming future.If there are any cost savings, the management would like to use the money for training and professional development of staff.The old machine is more environmentally compared to the new machine.Based on research, the inventory turnover will change from 3.45 to 3.47 with the new machineInstructions:Write a memo to the Chief Financial Officer and the President of the company detailing your explanation of your recommendations. Please note the President has no finance background.You recommendation should have the following but not limited to:(Ignore income tax effects.)Calculate the annual rate of return for the new machine. (Round to two decimals.)Compute the cash payback period for the new machine. (Round to two decimals.)Compute the net present value of the new machine. (Round to the nearest dollar.)On the basis of the foregoing data, would you recommend that LG buy the machine? Why or why not?If the required rate of return is 13% and 20%, what will your recommendation be?Make sure you reference your work properly.The memo should not exceed 2,000 words.Hint:To include in your memo, theory; what is the rate of return? And etc.Analysis would include quantitative and qualitative analysis. 1. You will need your ticker code (company abbreviation) for stock prices for this question. Use your ticker code to obtain the closing prices for the following two time periods to obtain two data sets: March 2, 2019 to March 16, 2019 Data set A February 16, 2019 to February 28, 2019 Data set B Take the closing prices from data set B and add 0.5 to each one of them. Treat data sets A and B as hypothetical sample level data on the weights of newborns whose parents smoke cigarettes (data set A), and those whose parents do not (data set B). a) Conduct a hypothesis test to compare the variances between the two data sets. b) Conduct a hypothesis to compare the means between the two data sets. Selecting the assumption of equal variance or unequal variance for the calculations should be based on the results of the previous test. c) Calculate a 95% confidence interval for the difference between means. Data set A: total= 677.98, mean= 67.798, n= 10, variance= 0.663084, std devition= 0.814299972 Data set B: total= 574.24, mean=71.78, n=8, variance= 0.727143, std devition= 0.852726719 Do not use excel function for p value. Show all your work2. Take data sets A and B and delete duplicated values such that each value is unique even when pooling the two data sets. Just like with the previous problem, treat data sets A and B as hypothetical data on the weights of children whose parents smoke cigarettes, and those whose parents do not, respectively.Calculate the expected value of the Wilcoxon Rank-Sum test statistic E(WX) assuming the null hypothesis of equal medians being true.Conduct a Wilcoxon Rank-Sum test on the data.Data set A: total= 677.98, mean= 67.798, n= 10, variance= 0.663084, std devition= 0.814299972Data set B: total= 574.24, mean=71.78, n=8, variance= 0.727143, std devition= 0.852726719Do not use excel function for p value.Show all your work what information is recorded on a job cost sheet? how do management and employees use job cost sheets Find a positive inverse for 39 modulo 648) Find a positive inverse for 39 modulo 64. You have a sample of sulfuric acid with an unknown concentration and you perform a titration with sodium hydroxide to determine the concentration.Your titration data for one trial is below:Initial burette reading (cm3)10.20Final burette reading (cm3)20.55The volume of acid used in each titration is 10.00 cm3 and the concentration of NaOH used is 0.1000 mol dm3.Determine the concentration of the sulfuric acid in mol dm3. Round your answer to four significant figures