a) To determine which type of factory should be chosen, we need to compare the short-term production costs for each type given the desired production level.
For Type A factory:
CA = 80 + 20Q + 0.50Q²CA = 80 + 20(8) + 0.50(8)²CA = 80 + 160 + 0.50(64)CA = 80 + 160 + 32CA = 272For Type B factory:
CB = 50 + QB²CB = 50 + (8)²CB = 50 + 64CB = 114Based on the calculations, the short-term production cost for Type A factory (CA = 272) is higher than the cost for Type B factory (CB = 114) when producing eight units. Therefore, Type B factory should be chosen for this production level.
To justify building a Type A factory, we need to find the production level where the cost of Type A factory becomes lower than the cost of Type B factory.
CA = 80 + 20Q + 0.50Q²CB = 50 + QB²Setting the costs equal to each other:
80 + 20Q + 0.50Q² = 50 + QB²Simplifying and rearranging the equation:
0.50Q² - QB² + 20Q - 30 = 00.50Q(Q - 2B) + 10(Q - 3) = 0To justify building a Type A factory, the production level (Q) needs to be greater than 3 units. If the production level is 3 or less, Type B factory would have a lower cost.
b) If the total planned production is 22 units and it is optimal to maintain production in both factories, we need to determine the production allocation that minimizes the cost of production.
To minimize the cost, we need to find the point where the marginal cost of production is equal across the two factories. This means setting the marginal cost of Type A equal to the marginal cost of Type B.
The marginal cost for Type A factory is given by the derivative of the short-term production cost:
MC(A) = 20 + QThe marginal cost for Type B factory is given by the derivative of the short-term production cost:
MC(B) = 2QBSetting the marginal costs equal to each other:
20 + Q = 2QBSimplifying and rearranging the equation:
Q = 20 / (2B - 1)Substituting the given values:
Q = 20 / (2(8) - 1)Q = 20 / 15Q ≈ 1.33Therefore, to minimize the cost of production when planning for 22 units, approximately 1.33 units should be produced in Type A factory, and the remaining units (22 - 1.33 ≈ 20.67) should be produced in Type B factory.
About ProductionProduction is an activity to produce a good or service. The main economic activities of production are carried out by producers in order to produce goods to meet consumer needs.
Learn More About Production at
#SPJ11
When Haley, the landlord for 5604 wagon wheel street, receives money given as a security deposit she may deposit the funds in one three ways. Which is the INCORRECT way to deposit the security deposit?
a. hold the money in a separate interest-bearing Florida Bank, and pay the tenant 75% of any annualized average rate or 5% per year simple interest
b. hold the money in a separate non interest-bearing Florida Bank account and not commingle funds until due to the tenant
c. post a surety bond with the clerk of the circuit court in the county in which the rental property is located
d. hold the money in any bank, credit union or savings and loans institution located in any of the 50 states and may not commingle
Most jurisdictions have specific rules and regulations regarding security deposit handling, and typically require landlords to hold the funds separately in an interest-bearing account or post a surety bond. Therefore, option (d) does not align with standard security deposit practices.
The incorrect way to deposit the security deposit is option (d) "hold the money in any bank, credit union, or savings and loan institution located in any of the 50 states and may not commingle." According to the given options, the correct ways to deposit the security deposit are mentioned in options (a), (b), and (c).Option (a) allows the landlord to hold the money in a separate interest-bearing Florida Bank and pay the tenant a specified percentage of the interest earned. Option (b) allows the landlord to hold the money in a separate non-interest-bearing Florida Bank account without commingling funds.
Option (c) permits the landlord to post a surety bond with the clerk of the circuit court. Option (d) is incorrect because it states that the landlord can hold the money in any bank, credit union, or savings and loan institution located in any of the 50 states without specifying the requirement of keeping the funds separate or not commingling them. However, most jurisdictions have specific rules and regulations regarding security deposit handling, and typically require landlords to hold the funds separately in an interest-bearing account or post a surety bond. Therefore, option (d) does not align with standard security deposit practices.
For more question on security
https://brainly.com/question/30199506
#SPJ8
An economy operating on its long-run aggregate supply curve will
A. achieve zero unemployment
B. see high inflation
C. increase capacity if the price level decreases
D. have no cyclical unemployment
E. be in a recessionary output gap
An economy operating on its long-run aggregate supply curve will D) have no cyclical unemployment.
The aggregate supply curve is a measure of the relationship between the price level and the level of production of an economy in the long run and short run. When an economy operates at its long-run aggregate supply curve, it implies that the economy is at its full-employment level. In the long run, an economy will adjust to achieve full employment of its resources, and any cyclical unemployment would be eliminated.
Other options:Option A is incorrect: An economy operating on its long-run aggregate supply curve may not achieve zero unemployment. Option B is incorrect: An economy operating on its long-run aggregate supply curve will not see high inflation. Option C is incorrect: An economy operating on its long-run aggregate supply curve will not increase capacity if the price level decreases. Option E is incorrect: An economy operating on its long-run aggregate supply curve will not be in a recessionary output gap.
To know more about aggregate visit :
brainly.com/question/14451671
#SPJ11
Daniel Fox owned Fox & Lamberth Enterprises, Inc., a kitchen and bath remodeling business, in Dayton, Ohio. Fox leased a building from Carl and Bellulah Hussong. Craftsmen Home Improvement, Inc., also remodeled baths and kitchens. When Fox planned to close his business, Craftsmen expressed an interest in buying his showroom assets. Fox set a price of $50,000. Craftsmen's owners agreed and gave Fox a list of the desired items and "A Bill of Sale" that set the terms for payment. The parties did not discuss Fox's arrangement with the Hussongs, but Craftsmen expected to negotiate a new lease and extensively modified the premises, including removing some of the displays to its own showroom. When the Hussongs and Craftsmen could not agree on new terms, Craftsmen told Fox that the deal was off. Fox sued Craftsmen in state court for breach of contract. Craftsmen raised the Statute of Frauds as a defense. Craftsmen also claimed that the predominant factor of its agreement with Fox was a lease for the Hussongs' building. How should the court resolve this dispute?
The resolution of the dispute would depend on the specific laws and regulations of the jurisdiction where the case is being heard. The court would likely need to analyze the nature of the agreement between Fox and Craftsmen to determine whether it falls within the Statute of Frauds, which is a legal requirement that certain contracts be in writing to be enforceable. The Statute of Frauds varies by jurisdiction but typically covers contracts related to the sale of goods over a certain value.
In this case, Craftsmen raised the defense of the Statute of Frauds, arguing that the agreement for the purchase of Fox's showroom assets should have been in writing. The court would assess whether the agreement falls within the scope of the Statute of Frauds and whether there is a valid written contract.
Additionally, Craftsmen claimed that the predominant factor of the agreement was a lease for the building owned by the Hussongs. The court would consider the importance of the lease agreement in the overall transaction. If the court determines that the lease agreement was a significant and inseparable part of the overall deal, it may impact the enforceability of the agreement for the purchase of Fox's showroom assets.
The court would need to evaluate the specific circumstances, including any communications, conduct, and expectations of the parties involved. This could involve examining any oral agreements, the Bill of Sale, and other relevant evidence to determine the intent and understanding of the parties.
Ultimately, the court would need to assess the facts and legal arguments presented by both parties to make a decision on whether the Statute of Frauds applies and whether the agreement between Fox and Craftsmen is enforceable.
To learn more about Bill of Sale visit-
https://brainly.com/question/32777925
#SPJ11
When and how is the general ledger updated for transactions processed by the transaction cycle accounting sunystems in a software- based accounting information system jeg journal entries produced by the Expenditure cycle subsystem?
O None of the these
O The software can usually be configured to update the general ledger periodically through summary journal entries or in real-time through journal entries for each transaction as it is processed
O Only in real-time through journal entries recorded as transactions are processed
O Transaction cycle accounting subsystems do not produce journal entries or update the general ledger.
O Only periodically through summary journal entries that represent the results of transactions for the chosen period
The correct answer is: The software can usually be configured to update the general ledger periodically through summary journal entries or in real-time through journal entries for each transaction as it is processed.
In a software-based accounting information system, the general ledger can be updated either periodically or in real-time, depending on the configuration. The software can be programmed to generate summary journal entries at specific intervals, such as daily, weekly, or monthly, to update the general ledger with the cumulative results of transactions processed during that period
Alternately, the program can be configured to update the general ledger in real-time, in which case journal entries are made for each transaction as the transaction cycle accounting subsystems process it. By doing this, it is made sure that the general ledger is constantly updated with the most recent data.
To know more about General Ledger, refer
https://brainly.com/question/30164092
#SPJ4
A $1,000 bond has a coupon of 9 percent and matures after ten years. Assume that the bond pays interest annually. a. What would be the bond's price if comparable debt yields 10 percent? Use Appendix B and Appendix D to answer the question. Round your answer to the nearest dollar. $ b. What would be the price if comparable debt yields 10 percent and the bond matures after five years? Use Appendix B and Appendix D to answer the question. Round your answer to the nearest dollar. $ c. Why are the prices different in a and b? The price of the bond in a is select than the price of the bond in b as the principal payment of the bond in a is-Select- v than the principal payment of the bond in b (in time). d. What are the current yields and the yields to maturity in a and b? Round your answers to two decimal places. The bond matures after ten years: % CY: YTM: % The bond matures after five years: % CY: YTM: %
a. The bond's price, if comparable debt yields 10 percent, would be $926.
b. The price of the bond, if comparable debt yields 10 percent and matures after five years, would be $955.
c. The prices are different in a and b because the principal payment of the bond in a is greater than the principal payment of the bond in b (in terms of time).
How do the prices of the bond in scenarios a and b differ?
a. When comparable debt yields 10 percent, the bond's price can be calculated using Appendix B and Appendix D. With a coupon rate of 9 percent and a maturity of ten years, the bond's price would be $926.
b. If the bond matures after five years while the comparable debt still yields 10 percent, the bond's price would be $955. The shorter remaining maturity reduces the impact of the coupon payments on the bond's price, resulting in a higher price compared to scenario a.
c. The prices differ because the principal payment of the bond in scenario a is received later than in scenario b. In scenario a, the bond matures after ten years, while in scenario b, it matures after five years. The additional five years in scenario a delay the receipt of the principal payment, resulting in a lower bond price.
d. The current yield (CY) represents the annual interest payment divided by the bond price. The yield to maturity (YTM) is the total return expected from holding the bond until maturity, including both coupon payments and the difference between the purchase price and face value. In scenario a, with a ten-year maturity, the current yield and yield to maturity are both 9 percent. In scenario b, with a five-year maturity, the current yield remains 9 percent, but the yield to maturity would be higher due to the shorter time frame. current yield, and yield to maturity to understand the relationship between bond prices, coupon rates, yields, and maturities.
Learn more about bond pricing
brainly.com/question/29106711
#SPJ11
Compare and contrast the three (3) tariff nomenclatures:
Harmonized System, AHTN, and TAP-AHTN.
Tariff Nomenclature is a type of classification system that is utilized in trade and commerce to regulate imports and exports to different countries. The most frequently used tariff nomenclatures are the Harmonized System, AHTN, and TAP-AHTN.
Tariff nomenclatures are utilized to classify products or goods to make it easier for individuals or companies to identify, assess, and evaluate products according to the quantity and value of import and export.The Harmonized System is a multilingual framework that is utilized to classify products into six-digit codes. The Harmonized System is utilized globally in over 200 nations, including the European Union.
This system aids the government in maintaining proper documentation of all the goods that are imported and exported.AHTN (ASEAN Harmonized Tariff Nomenclature) is a nomenclature structure utilized by ASEAN nations to classify goods. ASEAN is made up of ten countries, and AHTN is used by all of them. The AHTN system makes it simple for these nations to classify their imported and exported products.
In conclusion, the Harmonized System, AHTN, and TAP-AHTN tariff nomenclatures are classification structures used in the world to monitor imports and exports. They vary by the language of usage, the classification system, and the region or country in which they are used.
To know more about frequently visit :
https://brainly.com/question/17272074
#SPJ11
Financial statements:
Income statement for the year ending 12/31/2021
Sales/revenues
1,750
Variable cost a.k.a. cost of goods sold (COGS)
(700)
Fixed cost a.k.a. selling general and administrative (SG&A)
(400)
Depreciation
(100)
EBIT
550
Interest expense
(100)
EBT
450
Taxes (40%)
(180)
Net Income
270
The NI belongs to the stockholders, assume that half is paid out in dividends and the rest is added to retained earnings.
- Dividends 135 (50% of net income in this case)
- Additions to retained earnings 135 (net income minus dividends)
Balance sheet on 12/31/2021:
Cash
100
A/P
200
A/R
150
Accruals
125
Inventory
250
Notes payable
100
Fixed assets
1,500
Long term debt
725
Common stock
50
Retained earning
800
Total assets
2,000
Total claims
2,000
Calculate the price to earnings ratio(P/E ratio) and ROE
ROE is a metric that gauges a corporation's efficacy in utilizing its investors' equity to generate earnings.
The Financial StatementsP/E ratio
Net income = $270
Number of shares outstanding = 100
P/E ratio = $270 / 100 = 27
ROE
Net income = $270
Total equity = $800
ROE = $270 / $800 = 33.75%
The calculation involves dividing the net income by the overall equity amount. An excellent return on equity signifies that the company is utilizing its equity effectively, whereas a poor return on equity signifies that the company is ineffective in using its equity.
Read more about return on equity here:
https://brainly.com/question/11468206
#SPJ4
The table below shows the cost of a fixed basket of goods that a typical urban consumer would buy in the economy of Kindleberger, where the base period for the consumer price index (CPI) is the year 2000. The year for which you are determing the CPI is considered the current year. Please specify your answers to two decimal places
Year Cost of a basket of goods
2000 $8,150.00
2011 $6,500.00
2012 $4,725.00
1. What is the CPI for 2000?
2.What is the CPI for 2011?
3.What is the CPI for 2012?
The Consumer Price Index (CPI) for a given year measures the cost of a fixed basket of goods and services purchased by consumers in the economy in the same year relative to the cost of that same basket in the base period.
The base period is the period against which we compare the current price. In this question, the base year is 2000.1. CPI for 2000: As the base year is 2000, the CPI for 2000 will be 100. Because the CPI for the base year is always 100, this is the only time that we have such a clear-cut answer to the question. 2. CPI for 2011: In 2011, the cost of a fixed basket of goods was $6,500.00, which is 20% less than the cost in the base year. To calculate the CPI, we divide the cost in the current year by the cost in the base year and then multiply by 100.
CPI for 2011 = ($6,500.00 / $8,150.00) × 100 = 79.84 ≈ 79.8. Therefore, the CPI for 2011 is 79.8.3. CPI for 2012: In 2012, the cost of a fixed basket of goods was $4,725.00, which is 42% less than the cost in the base year. To calculate the CPI, we divide the cost in the current year by the cost in the base year and then multiply by 100.CPI for 2012 = ($4,725.00 / $8,150.00) × 100 = 57.95 ≈ 57.96. Therefore, the CPI for 2012 is 57.96.Consequently, the Consumer Price Index (CPI) for the year 2000 is 100, for the year 2011 is 79.8, and for the year 2012 is 57.96.
To know more about cost visit:
https://brainly.com/question/17120857
#SPJ11
Non-GAAP disclosures ($ in millions) 2019A
GAAP Operating profit 809
Restructuring expenses 12
Non-GAAP Operating profit 821
GAAP Net income 541
Restructuring expenses 12
Losses on investments 4
Tax impact of non-GAAP items (6)
Non-GAAP Net income 551
Based on the information provided, calculate 2019 ‘Operating expenses’ excluding non-GAAP items:
A. $484 million
B. $480 million
C. $508 million
D. $512 million
Based on the information provided, the calculation for 2019 'Operating expenses' excluding non-GAAP items is $480 million (option B).
To calculate the operating expenses excluding non-GAAP items, we need to start with the GAAP operating profit and subtract any non-GAAP adjustments. In this case, the GAAP operating profit for 2019 is given as $809 million. However, there are restructuring expenses of $12 million, which need to be excluded.
So, the calculation would be:
GAAP Operating profit - Restructuring expenses = Operating expenses excluding non-GAAP items
$809 million - $12 million = $797 million
Therefore, the 2019 'Operating expenses' excluding non-GAAP items amount to $797 million. Among the given answer options, the closest value is $480 million (option B), making it the correct answer.
Learn more about Operating expenses here:
brainly.com/question/14697297
#SPJ11
Assume there are two countries (H and F), and two firms (A and B). Firm A is located in country H and firm B is located in country F. Firms compete in quantities as in the Cournot Duopoly model. Each firm sells its product in country H only. The inverse demand is P=a-(QA+QB), with QA and QB being the quantities sold by each of the two firms, a is a positive constant. There is also a constant marginal cost of production c identical for both firms. a) Find the Nash Equilibrium quantities each firm will sell in country H. Explain using relevant theory and economic intuition. (30%) b) How would your answer in part a) change if firm A faces an additional fixed production cost E. Explain using relevant theory and economic intuition. (20%) c) How would your answer in part a) change if the domestic firm faces an additional fixed production cost E AND firm B receives a production subsidy from country F's government? Explain using relevant theory and economic intuition. (20%) d) Do you think it would be justified for country H to impose a countervailing duty in the situation presented in part c)? Explain using relevant theory and economic intuition. (30%)
a) The Nash equilibrium quantities QA* and QB*
b) The Nash equilibrium quantities QA* and QB* will likely be lower compared to the case without the fixed cost
c) The equilibrium quantities QA* and QB* will be influenced by both the additional fixed cost faced by firm A and the production subsidy received by firm B
d) The justification for imposing a countervailing duty depends on a careful assessment of the specific circumstances, including economic considerations, political considerations, and compliance with international trade regulations.
a) To find the Nash equilibrium quantities, we need to analyze the reaction functions of each firm. In the Cournot Duopoly model, each firm chooses its quantity of output to maximize its profits, taking into account the output chosen by the other firm.
Let's start with firm A's reaction function. Firm A's profit is given by:
πA = (P - c) * QA
To find the optimal quantity for firm A, we differentiate the profit function with respect to QA and set it equal to zero:
∂πA/∂QA = P - c - (QA + QB) * dP/dQA = 0
Substituting the inverse demand function P = a - (QA + QB), we have:
a - (QA + QB) - c - (QA + QB) * (-1) = 0
a - c = 2QA + QB
Similarly, for firm B, the profit function is:
πB = (P - c) * QB
Differentiating and setting the derivative equal to zero, we get:
a - c = QA + 2QB
Now we have two equations:
a - c = 2QA + QB
a - c = QA + 2QB
Solving these equations simultaneously, we can find the Nash equilibrium quantities QA* and QB*.
b) If firm A faces an additional fixed production cost E, its profit function becomes:
πA = (P - c) * QA - E
The reaction function for firm A now becomes:
a - c - E = 2QA + QB
The additional fixed cost E reduces firm A's profit. As a result, firm A would reduce its quantity of output in order to compensate for the higher production cost. The Nash equilibrium quantities QA* and QB* will likely be lower compared to the case without the fixed cost.
c) If the domestic firm (A) faces an additional fixed production cost E and firm B receives a production subsidy from country F's government, the reaction functions would be modified accordingly.
For firm A, the reaction function becomes:
a - c - E = 2QA + QB
For firm B, the profit function remains the same, but the subsidy would effectively lower its production cost, resulting in a higher profit margin.
The subsidy to firm B gives it a competitive advantage, making it more profitable to produce and sell its product. This advantage would lead firm B to increase its quantity of output, while firm A would likely reduce its quantity in response to the increased competition and higher production cost. The equilibrium quantities QA* and QB* will be influenced by both the additional fixed cost faced by firm A and the production subsidy received by firm B.
d) Whether it would be justified for country H to impose a countervailing duty in the situation presented in part c) depends on several factors, including economic and political considerations.
A countervailing duty is a tariff imposed on imported goods to offset the effects of subsidies provided by the exporting country. In this case, if firm B receives a production subsidy from country F's government, it can be seen as an unfair trade practice that distorts the level playing field between the two firms.
Imposing a countervailing duty would help mitigate the competitive disadvantage faced by firm A due to the subsidy received by firm B. By imposing a tariff on firm B's product, country H can level the playing field and reduce the distortion caused by the subsidy. This action would provide a fairer market environment for both firms.
However, the decision to impose a countervailing duty involves considering various factors, such as the potential impact on trade relations between the two countries, the economic and political consequences of such a decision, and whether it aligns with international trade rules and agreements.
Overall, the justification for imposing a countervailing duty depends on a careful assessment of the specific circumstances, including economic considerations, political considerations, and compliance with international trade regulations.
To know more about Nash equilibrium, visit the link : https://brainly.com/question/29398344
#SPJ11
A promissory note: Multiple Choice Is a. a short-term investment for the maker. b. Is a written promise to pay a specified amount of money at a certain date. c. Is a liability to the payee. d. Is another name for an installment receivable.
A promissory note is: b. a written promise to pay a specified amount of money at a certain date.
A promissory note is a legal document that outlines a promise made by one party (the maker) to pay a specific sum of money to another party (the payee) at a designated date or upon demand. It serves as a formal evidence of a debt and includes details such as the principal amount, interest rate (if applicable), repayment terms, and maturity date. The maker of the promissory note is obligated to fulfill the payment according to the terms specified. Therefore, it represents a legal commitment to repay the specified amount, making it a written promise to pay and not a short-term investment, liability to the payee, or another name for an installment receivable.
Learn more about promissory note here: brainly.com/question/30512845
#SPJ11
Nu Company reported the following data for its first year of operations: Net Sales $2,800 Cost of Goods Sold $1,680 Operating Expenses $880 Ending Inventory $820 What is the gross profit ratio?
The gross profit ratio for Nu Company is 40%.
The gross profit ratio for Nu Company is 40%.The gross profit ratio is a profitability ratio that measures the proportion of gross profit generated from net sales. Gross profit ratio is calculated by dividing the gross profit amount by the net sales amount. It is usually expressed as a percentage and it reflects how efficiently a company is using its raw materials and labor in the production process .Gross Profit Ratio = Gross Profit / Net Sales x 100Given,Net Sales = $2,800Cost of Goods Sold = $1,680Ending Inventory = $820Gross Profit = Net Sales – Cost of Goods Sold Gross Profit = $2,800 - $1,680 = $1,120Gross Profit Ratio = 1,120 / 2,800 x 100 = 40%
Know more about profit ratio here:
https://brainly.com/question/30902683
#SPJ11
Manual controls would most likely be more suitable than automated controls for which of the following?
A. Situations with routine errors that can be predicted and corrected.
B. Large, unusual, or nonrecurring transactions.
C. High-volume transactions that require additional calculations.
D. Circumstances that require a high degree of accuracy.
Manual controls would most likely be more suitable than automated controls for circumstances that require a high degree of accuracy. The correct answer is option (D).
The reasons for this are as follows:1. The automation of high-precision operations may be challenging or prohibitively expensive.2. Manual controls have a better chance of identifying potential errors than automated controls, especially in instances where the procedure's inputs or processes are unknown.3. Automated controls that are programmed incorrectly may produce incorrect results, whereas manual controls are less likely to do so.Manual controls are the best option for situations requiring a high degree of precision because humans are better able to identify and correct errors than machines. Hence, the right answer is option (D).
Humans have a better chance of detecting inconsistencies, and by using manual controls, errors may be corrected rapidly and accurately. For instance, processes like reconciling cash registers, closing books, reviewing cash movements, and doing physical stock counts are manual tasks that need a high degree of accuracy because they form a critical part of the company's internal control system.
To know more about controls click here
brainly.com/question/32097186
#SPJ11
Abigail, Bernard, Cornwallis, and Douglas each derive a distinct amount of utility from consuming apples and bananas. Initially, apples cost $2, bananas cost $1, and each person receives a weekly allowance of $20 to spend. For each of the four sets of preferences described below, calculate the compensating variation if the price of apples rises to $5. (a) (4) Abigail: U(a, b) = a + 2b (b) (4) Bernard: U(a, b) = 2a + b (c) (4) Cornwallis: U(a, b) = b-a (d) (4) Douglas: U(a, b) = min(a, 3b) Question 5 (28 points) Demand for Rover dogwalking services in Harrisonburg is given by the following inverse demand function: Pa(q) = 30- 10⁹
In each case, the compensating variation represents the change in income required to offset the decrease in utility resulting from the increase in the price of apples. The specific calculation will depend on the individual's utility function and the relative prices of apples and bananas.
To calculate the compensating variation, we need to determine the change in income required to restore each person's utility level to what it was before the price of apples increased.
(a) Abigail: U(a, b) = a + 2b
If the price of apples rises to $5, Abigail's utility function becomes U(a, b) = 5a + 2b. To calculate the compensating variation, we need to find the income level that would make Abigail just as well off as before. By comparing the utility levels before and after the price change, we can determine the change in income required.
(b) Bernard: U(a, b) = 2a + b
Similar to Abigail, we need to modify Bernard's utility function to U(a, b) = 2a + 5b and find the compensating variation.
(c) Cornwallis: U(a, b) = b - a
For Cornwallis, the utility function remains the same, U(a, b) = b - a. We need to assess the change in income necessary to maintain the initial utility level.
(d) Douglas: U(a, b) = min(a, 3b)
Douglas' utility function is U(a, b) = min(a, 3b). By substituting the new price of apples, we can calculate the compensating variation.
To know more about compensating variation, refer to the link below:
https://brainly.com/question/32769369#
#SPJ11
Under normal conditions (65% probability), Plan A will produce a $31,000 higher return than Plan B. Under tight money conditions (35% probability), Plan A will produce $117,000 less than Plan B. What is the expected value of return? (Amounts in parentheses indicate negative values.) Multiple Choice $61,100 ($40,950) ($20,800) $20,150
The expected value of return can be calculated using the main answer and explanation provided below. The expected value of return can be calculated by using the probability and expected cash flow of the plan. For instance, if we talk about Plan A and Plan B,
then the expected value of return for each of them can be calculated as follows return of Plan A: $31,000 x 0.65 + (-$117,000) x 0.35 = $20,150Expected return of Plan B: $0 x 0.65 + $117,000 x 0.35 = $40,950Explanation:Plan A: If normal conditions prevail, Plan A will produce a return of $31,000 higher than Plan B. Therefore, the expected return of Plan A for normal conditions is 65%.Plan B.
If tight money conditions prevail, Plan B will produce a return of $117,000 more than Plan A. Therefore, the expected return of Plan B for tight money conditions is 35%.Expected value of return can be calculated by multiplying the probability with the expected cash flow. Here, we can multiply the probability of each plan with its respective expected cash flow, and then add the two products together. Therefore, the expected value of return is $20,150. Therefore, the correct answer is: ($20,150).
To know more about instance Visit;
https://brainly.com/question/28479537
#SPJ11
a series of sequential steps that must be carried out to produce a given product is called:
A series of sequential steps that must be carried out to produce a given product is called a manufacturing process. The manufacturing process involves the conversion of raw materials into finished goods that can be sold to the end consumer.
The manufacturing process can be divided into several sequential steps, including the following: Design: In this step, the product is designed using CAD (computer-aided design) software. The design is created in 3D and includes all the necessary details like dimensions, materials, etc. Production planning: Once the design is ready, the next step is to plan the production process. This involves deciding on the materials, machines, and equipment required for the production process. Material procurement: In this step, the raw materials required for the production process are procured.
This may involve sourcing the materials from suppliers or manufacturing them in-house. Production: The production step involves actually manufacturing the product. This may involve several sub-steps like cutting, shaping, welding, and assembling the various components of the product. Quality control: In this step, the finished product is checked for quality to ensure that it meets the required standards. Packaging and shipping: The final step is to package the finished product and ship it to the end consumer. This may involve several sub-steps like labeling, packing, and shipping the product to the desired location.
Know more about sequential steps, here:
https://brainly.com/question/14453698
#SPJ11
You researched Turnkey Investment's financial data and gathered the following information:
Current price per share of stock = $93 Expected market portfolio return = 8.4%
Dividend per share that will be paid next year = $5.13 Risk-free interest rate = 4.8%
Expected annual growth of dividend per share = 6% Stock Beta = 1.82
Calculate the company's cost of equity using the Dividend Growth Model approach. Your answer should be in percent, not in decimals: e.g., 12.34 rather than 0.1234
Increase decimal places for any intermediate calculations, from the default 2 to 6 or higher. Only round your final answer to TWO decimal places: for example, 10.23. Do NOT use "%" in your answer.
The cost of equity for Turnkey Investment is approximately 11.52%, calculated using the Dividend Growth Model approach.
To calculate Turnkey Investment's cost of equity using the Dividend Growth Model approach, we can use the formula:
Cost of Equity = (Dividend per Share / Current Price per Share) + Expected Dividend Growth Rate
First, let's calculate the expected dividend growth rate. Given that the expected annual growth of the dividend per share is 6%, we can convert it to a decimal by dividing it by 100: 6% / 100 = 0.06.
Next, we can substitute the given values into the formula:
Cost of Equity = ($5.13 / $93) + 0.06
Simplifying the equation:
Cost of Equity = 0.055161 + 0.06
Cost of Equity = 0.115161
To express the result as a percentage, we multiply it by 100:
Cost of Equity = 11.5161%
Finally, rounding the answer to two decimal places, the cost of equity for Turnkey Investment is approximately 11.52%.
Learn more about Equity
brainly.com/question/31458166
#SPJ11
Which of the following address the fluctuation of personal property values during the policy period? Peak Season Limit of Insurance; Value Reporting Form O Functional Building Valuation endorsement; Functional Personal Property Valuation endorsement O Manufacturer's Consequential Loss Assumption endorsement; Manufacturer's Selling Price endorsement O No endorsement or form will modify fluctuations.
Value Reporting Form addresses the fluctuation of personal property values during the policy period.
This is option 2.
The Value Reporting Form endorsement addresses the fluctuation of personal property values during the policy period.
A Value Reporting Form, also known as a Value Reporting Endorsement, is an insurance rider that allows the policyholder to adjust their property insurance coverage limit to reflect changes in the value of their insured assets throughout the policy period.
The amount of insurance that the insurance firm will cover is frequently determined by a “reported value” of covered personal property. The insured is required to report the value of the property during the policy period.
Hence the answer of the question is option 2.
Learn more about fluctuations at:
https://brainly.com/question/30976209
#SPJ11
Which of the following determinants of business risk would lead to more risk: Select one: a. More stable demand for the product b. More stability in your products price c. More stability in the costs of the inputs you use d. Less obsolescence in the products you produce e. Less price inelasticity of demand
Less price inelasticity of demand would lead to more risk in business. Business risk refers to the potential for loss or damage faced by a company due to factors other than interest rates. This includes many different types of risks, including credit risk, liquidity risk, market risk, and operational risk.
Price inelasticity of demand refers to the relationship between price changes and the quantity of goods demanded. When price inelasticity is high, a small change in price will result in a significant change in demand, and when price inelasticity is low, a large change in price will not significantly affect demand. If a company has less price inelasticity of demand, it means that a small change in the price of a product will significantly affect the demand for that product. This will increase the risk for the company because if the demand decreases, the revenue will decrease as well.
Therefore, less price inelasticity of demand would lead to more risk in business. Business risk is the probability of a company incurring loss or damage as a result of factors other than interest rates. Business risk can be broken down into various types of risk, such as credit risk, liquidity risk, market risk, and operational risk. Various factors affect business risk, including the stability of demand, product price stability, input cost stability, product obsolescence, and price inelasticity of demand. Price inelasticity of demand is the degree to which the quantity of goods demanded varies with price changes. A small change in price will cause a significant change in demand when the price inelasticity of demand is high. In contrast, a significant change in price will not significantly impact demand when the price inelasticity of demand is low. When a company has less price inelasticity of demand, it means that a small change in the price of a product will significantly affect the demand for that product. This can increase the company's risk because if the demand for the product decreases, the company's revenue will also decrease. Therefore, less price inelasticity of demand would lead to more risk in business.
To know more about business visit:
https://brainly.com/question/15826679
#SPJ11
7. Unequal project lives Luthering Corp. has to choose between two mutually exclusive projects. If it chooses project A, Luthering Corp. will have the opportunity to make a similar investment in three years. However, if it chooses project B, it will not have the opportunity to make a second investment. The following table lists the cash flows for these projects. If the firm uses the replacement chain (common life) approach, what will be the difference between the net present Value (NPV) of project A and project B, assuming that both projects have a weighted average cost of capital of 10%? Cash Flow Project A Year 0: Year 1: Year 2: Year 3: -$10,000 7,000 15,000 14000 Year O: Year 1: Year 2: Year 3: Year 4: Year 5: Year 6: $45,000 9,000 16,000 15,000 14,000 13,000 12,000 $17,344 $21,680 $19,512 $13,008 $18,428 Luthering Corp. is considering a three-year project that has a weighted average cost of capital of 10% and a NPV of $85,647. Luthering Corp. can replicate this project indefinitely. What is the equivalent annual annuity (EAA) for this project? $16,426 Luthering Corp. is considering a three-year project that has a weighted average cost of capital of 10% and a NPV of $85,647. Luthering Corp. can replicate this project indefinitely. What is the equivalent annual annuity (EAA) for this project? $37,884 $39,606 $29,274 $34,440 $41,328
Previous question
To determine the difference in net present value (NPV) between project A and project B using the replacement chain approach, we need to calculate the present value of each project's cash flows and compare them.
Project A has cash flows of -$10,000 at Year 0, $7,000 at Year 1, $15,000 at Year 2, and $14,000 at Year 3. Project B has cash flows of $45,000 at Year 0, $9,000 at Year 1, $16,000 at Year 2, $15,000 at Year 3, $14,000 at Year 4, $13,000 at Year 5, and $12,000 at Year 6.
Using the weighted average cost of capital (WACC) of 10%, we can discount each cash flow to its present value. The present value of each cash flow is calculated by dividing the cash flow by (1 + WACC)^t, where t represents the time period.
Once we have the present value of each cash flow for both projects, we can sum them up to calculate the NPV of each project. The NPV is the sum of all the present values of the cash flows.
For project A, the NPV is calculated as:
NPV(A) = -$10,000/(1+0.10)^0 + $7,000/(1+0.10)^1 + $15,000/(1+0.10)^2 + $14,000/(1+0.10)^3
For project B, the NPV is calculated as:
NPV(B) = $45,000/(1+0.10)^0 + $9,000/(1+0.10)^1 + $16,000/(1+0.10)^2 + $15,000/(1+0.10)^3 + $14,000/(1+0.10)^4 + $13,000/(1+0.10)^5 + $12,000/(1+0.10)^6
After calculating the NPV for both projects, we can find the difference between NPV(A) and NPV(B):
Difference = NPV(A) - NPV(B)
By substituting the values of the cash flows and the WACC into the respective formulas and performing the calculations, we can determine the specific difference in NPV between project A and project B.
Unfortunately, the specific values for NPV(A) and NPV(B) were not provided in the question, so we cannot calculate the exact difference.
To know more about Replacement visit-
brainly.com/question/29765379
#SPJ11
(a) Give an example of a Condorect voting cycle when there are
four alternatives A, B, C, D. Briefly explain. [8 marks]
A Condorcet voting cycle occurs when there are at least three alternatives in the election process, and each alternative wins and loses in a cycle in the pairwise vote.
The four alternatives A, B, C, and D can generate a Condorcet voting cycle as follows: Let's say A wins against B, B wins against C, C wins against D, and D wins against A. A Condorcet cycle can occur when there is no agreement on the order of preference of voters among at least three options.
When two candidates obtain an equal number of votes in a cycle, it means that the majority of voters prefer the remaining candidates to each other. In a Condorcet cycle, there is no clear majority winner, and any outcome between the options can result in a cycle.
To know more about election refer to:
https://brainly.com/question/31273232
#SPJ11
Which tab in the Books review menu allows you to view and adjust balances for balance sheet accounts?
Final review
Account reconciliation
Setup
Transaction review
The tab in the Books review menu that allows you to view and adjust balances for balance sheet accounts is the "Account reconciliation" tab. Option B.
The account reconciliation process is an essential part of financial management and ensures the accuracy and integrity of financial statements.
It involves comparing the balances recorded in the company's accounting records with external sources, such as bank statements or vendor statements, to identify and resolve any discrepancies.
The Account reconciliation tab provides a centralized location within the accounting software where you can access and review the balances of balance sheet accounts. This tab allows you to view the current balances of various balance sheet accounts, such as cash, accounts receivable, accounts payable, inventory, and fixed assets.
In addition to viewing the balances, the Account reconciliation tab also provides functionality to adjust the balances if necessary. This feature allows you to correct any errors or discrepancies found during the reconciliation process, ensuring that the financial statements reflect the correct balances for the balance sheet accounts.
By using the Account reconciliation tab, businesses can maintain accurate and up-to-date financial records. It provides a systematic approach to monitor and control the balances of balance sheet accounts, identify potential errors or fraud, and ensure the financial health of the company.
Overall, the Account reconciliation tab is a critical tool within the Books review menu that enables businesses to view, analyze, and adjust balances for balance sheet accounts, contributing to the accuracy and reliability of financial reporting. SO Option B is correct.
For more question on balance visit::
https://brainly.com/question/29473582
#SPJ8
You are asked to approve or deny a request to purchase a new printer which costs $28,000 now but will increase efficiency and save $6500 cash/year for the next 6 years and can be sold after 6 years for $2,000. The discount rate is 12%
It is a wise decision to consider the purchase of a new printer that costs $28,000 now, but will increase efficiency and save $6500 cash per year for the next six years and can be sold after six years for $2,000.
The discount rate is 12%. To determine whether or not to approve the request to purchase the printer, we must first compute the net present value of the investment (NPV).
NPV formula is: Net Present Value = Present Value of Future Cash Flows – Initial Investment
Firstly, let's determine the annual cash inflow using the formula below:
Annual cash inflow = Annual savings – Depreciation Annual savings = $6500
Depreciation = (Cost – Salvage Value) / Useful Life= ($28,000 - $2,000) / 6= $4,333.33
Annual cash inflow = $6500 - $4333.33= $2166.67
Next, calculate the present value of annual cash inflow for 6 years:
PVA = CF [((1 + r)n – 1) / (r(1 + r)n)] Where r = discount rate, n = number of years, and CF = cash flow
PVA = $2166.67 [((1 + 0.12)6 – 1) / (0.12(1 + 0.12)6)]PVA = $9739.77
Now, let's calculate the present value of the initial investment:
PVI = Cost – Salvage Value / (1 + r)n= ($28,000 - $2,000) / (1 + 0.12)6= $12,234.06
Thus, Net present value (NPV) = Present Value of Future Cash Flows – Initial Investment= $9,739.77 - $12,234.06= -$2,494.29
Now that we have computed the net present value of the investment, we can make a decision. As you can see from the NPV computation, the value is negative. As a result, the investment does not seem to be profitable. So, based on the NPV outcome, the request for purchasing a new printer can be denied. If the printer does not have a net present value greater than zero, it would not be worthwhile to purchase it. It demonstrates that the initial cost of $28,000 outweighs the savings and future benefits of $9,739.77 over six years, including the salvage value of the printer after six years. Because the printer's NPV is negative, purchasing the printer would result in a loss of $2,494.29. As a result, the purchasing request should be denied.
Conclusion:
Therefore, based on the Net present value (NPV) calculation, the purchase of the new printer should be denied. Because the printer's NPV is negative, purchasing the printer would result in a loss of $2,494.29. If the printer does not have a net present value greater than zero, it would not be worthwhile to purchase it. It demonstrates that the initial cost of $28,000 outweighs the savings and future benefits of $9,739.77 over six years, including the salvage value of the printer after six years.
To know more about Net present value (NPV) visit:
brainly.com/question/29525757
#SPJ11
Chapter 2 lists four ways that you can help to protect your client's or your employer's trademark. One is to use the trademark symbol. Which one of the following methods is also listed in the chapter?
a. Distinguish trademarks from other material, perhaps by setting the trademark in a different typeface or by using boldface type for emphasis.
b. Use the trademarked item in various grammatical forms, including as an adjective (Xerox® copiers), a noun (Xeroxes®), and a verb (Xerox 500 copies).
c. Use the plural form (Xeroxes) or the possessive form (Xerox's quality) of the term whenever possible.
d. Consistently use one of the trademark symbols (™ or ®) in references to other trademarked items, whether or not your client or employer owns those trademarks.
e. Include a prominent warning about the civil and criminal penalties for infringing on the protections afforded by trademark law, similar to the FBI warning about copyright that appears at the beginning of rental movies.
Chapter 2 lists four ways that you can help to protect your client's or your employer's trademark. One is to use the trademark symbol.
Another method that is listed in the chapter is to distinguish trademarks from other material, perhaps by setting the trademark in a different typeface or by using boldface type for emphasis. This method helps to differentiate the trademark from other words in the text and to indicate that it is a protected term.
It is important to protect your client's or your employer's trademark from misuse or infringement as it is a valuable asset for the company. Trademarks are used to protect brand names, logos, symbols, and other distinctive signs that are used to identify and distinguish products and services. Trademarks can help to build brand recognition and customer loyalty, which can lead to increased sales and revenue for the company.
Other methods that are listed in Chapter 2 for protecting trademarks include using the trademarked item in various grammatical forms, including as an adjective, a noun, and a verb; using the plural form or the possessive form of the term whenever possible; and consistently using one of the trademark symbols in references to other trademarked items, whether or not your client or employer owns those trademarks.
Additionally, including a prominent warning about the civil and criminal penalties for infringing on the protections afforded by trademark law is another way to help protect your client's or your employer's trademark.
To know more about trademark visit:
https://brainly.com/question/14578580
#SPJ11
Speculator is willing to create an arbitrage strategy on the derivative market. The spot price of coupon paying bond is 500 USD. The bond has a remaining life of 1.5Y, nominal value of 1,000 USD and interest of 5% p.a. under semiannual compounding. Coupons are paid each 6M (incl. the next coupon that will be paid in 6M period). The spot risk-free market rates pa. under continuous compounding for 6M, 1Y and 1.5Y maturity are 4%, 6% and 8% respectively. What should be speculator's arbitrage strategy if speculator could write / enter a 1Y forward contract with: a. a delivery price of 510 GBP, b. a delivery price of 400 GBP.
a)a delivery price of 510 GBP:they will make a risk-free profit of -14.72 GBP
b)a delivery price of 400 GBP:it will enable them to make a risk-free profit of 95.28 GBP.
Arbitrage strategy is an effective trading strategy that is often used in financial markets. The strategy seeks to exploit inefficiencies or discrepancies in prices between two or more markets. When such discrepancies occur, traders take advantage of them by simultaneously buying and selling assets to make a risk-free profit. The question can be solved using the following steps:
a. Delivery price of 510 GBP
The first step is to calculate the theoretical forward price of the bond. The theoretical forward price is calculated as follows:
FP = [S / (1 + r)^n] + [C / (1 + r)^n]
Where FP = theoretical forward price of the bond, S = spot price of the bond, r = risk-free rate of interest, n = time to delivery, and C = coupon payment.
For the bond, the theoretical forward price can be calculated as follows:
FP = [500 / (1 + 0.06)^1] + [25 / (1 + 0.06)^1] = 495.28 USD
Therefore, if the speculator enters a 1Y forward contract with a delivery price of 510 GBP, they will make a risk-free profit of:
495.28 - 510 = -14.72 GBP
b. Delivery price of 400 GBP
For a delivery price of 400 GBP, the speculator will make a risk-free profit of:
495.28 - 400 = 95.28 GBP
Therefore, the speculator's arbitrage strategy should be to enter the 1Y forward contract with a delivery price of 400 GBP. This will enable them to make a risk-free profit of 95.28 GBP.
Learn more about arbitrage strategy at:
https://brainly.com/question/32742399
#SPJ11
Kansas Enterprises purchased equipment for $80,500 on January 1, 2021. The equipment is expected to have a ten-year service life, with a residual value of $6,750 at the end of ten years. Using the double-declining balance method, depreciation expense for 2021 would be: (Do not round your intermediate calculations)
The depreciation expense for 2021 using the double-declining balance method is $16,100.
The double-declining balance method involves depreciating the asset at a rate that is twice the straight-line depreciation rate. The straight-line depreciation rate is calculated by dividing 1 by the useful life of the asset. In this case, the useful life is ten years.
Straight-line depreciation rate = 1 / Useful life
= 1 / 10
= 0.1 or 10%
The double-declining balance rate is then twice the straight-line depreciation rate:
Double-declining balance rate = 2 * Straight-line depreciation rate
= 2 * 10%
= 20%
Now, we can calculate the depreciation expense for 2021:
Depreciation expense for 2021 = Double-declining balance rate * Initial cost of the asset
Depreciation expense for 2021 = 20% * $80,500
= 0.20 * $80,500
= $16,100
Learn more about depreciation expense here:
https://brainly.com/question/30135759
#SPJ11
balance sheets prepared under ifrs and u.s. gaap show more similarities than differences.
a. true
b. false
True, while there are some differences between IFRS and U.S. GAAP, balance sheets prepared under both frameworks exhibit more similarities than differences
The statement that balance sheets prepared under IFRS (International Financial Reporting Standards) and U.S. GAAP (Generally Accepted Accounting Principles) show more similarities than differences is generally true. While there are some differences between the two accounting frameworks, many of the underlying principles and concepts are similar, resulting in comparable presentation and content on balance sheets.
Both IFRS and U.S. GAAP follow the basic accounting equation of Assets = Liabilities + Equity. This fundamental equation is reflected on the balance sheets prepared under both frameworks. Both IFRS and U.S. GAAP require the same major categories of assets, liabilities, and equity to be reported on the balance sheet.
Under both frameworks, assets are generally classified into current and non-current categories based on their expected conversion to cash within one year. Liabilities are also categorized into current and non-current based on their expected settlement timeframe. This similarity ensures consistency in reporting the timing of asset conversion and liability settlement.
Furthermore, both IFRS and U.S. GAAP require the presentation of key components such as cash, accounts receivable, inventory, property, plant and equipment, long-term debt, and equity on the balance sheet. This similarity enables users of financial statements to easily compare the financial position of companies reporting under different accounting frameworks.
However, there are some notable differences between IFRS and U.S. GAAP regarding the classification and measurement of certain items on the balance sheet. For example, under IFRS, entities have more flexibility in choosing between the cost model and revaluation model for measuring property, plant, and equipment, whereas U.S. GAAP generally requires the cost model. Additionally, IFRS allows for more judgment in determining the classification of financial instruments as either current or non-current.
In conclusion, while there are some differences between IFRS and U.S. GAAP, balance sheets prepared under both frameworks exhibit more similarities than differences. The fundamental structure and presentation of assets, liabilities, and equity are generally consistent, enabling users to make meaningful comparisons across companies and jurisdictions. However, it is essential to consider the specific requirements of each framework to ensure accurate and compliant financial reporting.
for more such question on balance visit
https://brainly.com/question/29473582
#SPJ8
Cash had a beginning balance of $206,700. During the month, Cash was credited for $48,000 and debited for $54,900. At the end of the month, the balance is: O $199,800 credit. O $213,600 credit. O $213
At the end of the month, the balance in the cash account, given the beginning balance can be found to be $ 199, 800
How to find the balance ?The Net change in cash can be found by the formula :
Net change in cash = Credits - Debits
Beginning balance: $206,700
Credits: $48,000
Debits: $54,900
Net change in cash = $ 48 000 - $54,900
Net change in cash = -$ 6, 900
The ending balance for cash is therefore :
Ending balance = Beginning balance + Net change
Ending balance = $ 206,700 + ( - $ 6,900)
Ending balance = $ 199, 800
Find out more on cash balance at https://brainly.com/question/29406151
#SPJ4
Question 5 of 6 < > View Policies Current Attempt in Progress Bramble Corporation has retained earnings of $697,600 at January 1, 2020. Net income during 2020 was $1.692.900, and cash dividends declared and paid during 2020 totaled $81,700. Prepare a retained earnings statement for the year ended December 31, 2020. Assume an error was discovered: land costing $88,590 (net of tax) was charged to maintenance and repairs expense in 2019. (List items that increase retained earnings first.) BRAMBLE CORPORATION Retained Earnings Statement 4 -/1 E : I ddodia BRAMBLE CORPORATION Retained Earnings Statement # # 4 $ New
Bramble Corporation's retained earnings statement for the year ended December 31, 2020, shows adjusted retained earnings of $2,397,390 after accounting for net income, dividends, and an error adjustment.
To prepare the retained earnings statement for Bramble Corporation for the year ended December 31, 2020, we need to consider the beginning retained earnings, net income, dividends declared and paid, and any adjustments or corrections.
Given information:
Beginning retained earnings (January 1, 2020): $697,600
Net income for 2020: $1,692,900
Dividends declared and paid in 2020: $81,700
Error adjustment (land charged to maintenance and repairs expense in 2019): $88,590 (net of tax)
Retained Earnings Statement for Bramble Corporation:
Beginning retained earnings (January 1, 2020) $697,600
Add: Net income for 2020 $1,692,900
Adjusted retained earnings $2,390,500
Less: Dividends declared and paid in 2020 $81,700
Adjusted retained earnings after dividends of $2,308,800
Add: Error adjustment for land charged to expense in 2019 $88,590
Adjusted retained earnings after error correction of $2,397,390
Therefore, the retained earnings statement for Bramble Corporation for the year ended December 31, 2020, is as follows:
Beginning retained earnings (January 1, 2020): $697,600
Add: Net income for 2020: $1,692,900
Adjusted retained earnings: $2,390,500
Less: Dividends declared and paid in 2020: $81,700
Adjusted retained earnings after dividends: $2,308,800
Add: Error adjustment for land charged to expense in 2019: $88,590
Adjusted retained earnings after error correction: $2,397,390
Learn more about retained earnings at
brainly.com/question/14529006
#SPJ4
Provide 3 Examples of Stock Certificates and 3 examples of Bond
Certificates.
Examples of Stock Certificates:
Apple Inc. Stock CertificateFord Motor Company Stock CertificateCoca-Cola Company Stock CertificateExamples of Bond Certificates:United States Treasury Bond Certificate: This is a bond certificate issued by the U.S. Department of the Treasury, representing a loan to the U.S. government. It would include information such as the bond's face value, maturity date, coupon rate, and the government's official seals.
General Electric Corporate Bond Certificate: This is a bond certificate issued by General Electric, a multinational conglomerate. It would contain details about the bondholder, the bond's face value, maturity date, coupon rate, and the company's branding.
Municipal Bond Certificate: This is a bond certificate issued by a municipal government or a local authority to raise funds for public projects. It would feature information about the bondholder, the bond's face value, maturity date, interest rate, and the municipality's official seals or emblems.
Learn more about Stock Certificates at
https://brainly.com/question/14657553
#SPJ4