Answer:
(I suppose that we want to find the probability of first randomly drawing a red checker and after that randomly drawing a black checker)
We know that we have:
12 red checkers
12 black checkers.
A total of 24 checkers.
All of them are in a bag, and all of them have the same probability of being drawn.
Then the probability of randomly drawing a red checkers is equal to the quotient between the number of red checkers (12) and the total number of checkers (24)
p = 12/24 = 1/2
And the probability of now drawing a black checkers is calculated in the same way, as the quotient between the number of black checkers (12) and the total number of checkers (23 this time, because we have already drawn one)
q = 12/23
The joint probability is equal to the product between the two individual probabilities:
P = p*q = (1/2)*(12/23) = 0.261
T
If JKLM is a rectangle, solve for x.
How can this expression be written another way?
32k + 24
Factor using the distributive property and the greatest common factor to write an equivalent expression
Enter your answer by filling in the boxes
32k + 24 = __ (__)
it is 20 miles from the airport to the hotel. The driver says that there is 1/8 of the total distance left to travel. What distance has already been driven?
Answer:
2.5mi
Step-by-step explanation:
?/20 = 1/8
^ If you turn into a percentage you get 1/8 = 12.5%
so now the question is v
what is 12.5 percent of 20?
which is 2.5
I WOULD CHECK FIRST, NOT 100 PERCENT SURE
A company advertises on a website
Answer:
I'm not that good at math sorry for waiting your time:)
What is an equation of the line that passes through the point (3,-1) and is parallel to the line 5.2 + 3y = 6?
Answer: Its y=-1.
Step-by-step explanation:
There are 40 batteries in 10 packs.
Gavin wants to know how many batteries are in 1 pack.
Kylie wants to know how many batteries are in 5 packs.
Drag an expression to answer each question.
Answer:
1.40/10
2.40/2
Step-by-step explanation:
Answer: For a 1 pack you would divide 40 by 10 and for a 5 pack youd divide 40 by 5
Step-by-step explanation:
Find the value of $x$ .
A circle with center Q has four points L, M, N, and P lie on the circle. Diameter L N and chord M P intersect perpendicularly. The diameter divides the chord M P into two parts with measures 5 x minus 6 and 2 x plus 9.
Answer:
What
Step-by-step explanation:
I dont understand what you are asking
Suppose that a population P(t) follows the following Gompertz differential equation. dP dt = 3P(20 – In P), with initial condition P(0) = 60. (a) What is the limiting value of the population? (b) What is the value of the population when t = 3?
The limiting value of the population is approximately 485165195.41, as t approaches infinity, and the value of the population at t = 3 can be determined by solving the Gompertz differential equation with the initial condition, resulting in a specific numerical value.
(a) The limiting value of the population, as t approaches infinity, can be determined by analyzing the behavior of the Gompertz differential equation. As t increases, the term 20 - ln(P) will tend to 20, as ln(P) approaches infinity.
Therefore, the limiting value of the population can be found by setting 20 - ln(P) equal to 0 and solving for P. In this case, we can solve the equation 20 - ln(P) = 0 to find that the limiting value of the population is P = e^20, which is approximately 485165195.41.
(b) To find the value of the population when t = 3, we can use the given Gompertz differential equation. Plugging in t = 3 and the initial condition P(0) = 60, we can solve the differential equation numerically or use an appropriate method to find the value of P at t = 3.
This would require solving the equation dP/dt = 3P(20 - ln(P)) with the initial condition P(0) = 60. The resulting population value at t = 3 will depend on the specific numerical solution obtained.
In summary, the limiting value of the population is approximately 485165195.41, and the value of the population at t = 3 can be found by solving the Gompertz differential equation with the given initial condition.
To learn more about Differential equations, visit:
https://brainly.com/question/25731911
#SPJ11
I need help thank you
Answer:
A & C
Step-by-step explanation:
If you substitute the first coordinate (which is the x coordinate) for x in the function and set it equal to the y, options A and C should satisfy the function.
Find the area of a circle if the diameter is l6 meters.
PLEASE EXPLAIN AND DO THE PROBLEM IN THE ANSWER!!!!
Answer:
Step-by-step explanation:
the formula for a circle is pi(r^2) where r is the radius. the diameter is 16 so 16/2 =8. substitute 8 for the radius to get pi(8^2). 8^2=64 so you have pi(64).
pi(64)= approximately 201.06
please help I will mark 5 stars and worth 30 pts
Answer:
25
Step-by-step explanation:
I took the test 2021!!!
Plz help I’ll mark brainliest:$
(1) x = -2 y = -8
(2) x = -1 y = -4
(3) x = 0 y = 0
(4) x = 1 y = 4
(5) x = 2 y = 8
Those are the answers for what y is so now i think you have to plug it in to the right side of the chart
Carson packed his movies in a box that is in the shape of a rectangular prism. The height of the box is 17 inches. The length of the box is 1.5 times the height. The volume of the box is 5,635.5 cubic inches. What is the width of the box?
Answer:
Width: 13 inches
Step-by-step explanation:
To find the width of prism you would have to divide the volume of the prism by the area of the cross section.
First calculate the area of the cross section of the prism:
17 × 25.5= 433.5
Then divide the cross section area by the volume:
5635.5 ÷ 433.5= 13
The width is 13 inches
Let P(n) be the set of all partitions of the positive integer n. For all (a₁,..., ak), B = (B₁, ...) = P(n), define (a) Show that (P(n), ≤) is a partially ordered sets (b) Draw its Hasse diagram of (P(6),≤). Is (P(n), ) a lattice for all n?
The set of all partitions of a positive integer n, denoted as P(n), forms a partially ordered set (poset) under the relation of set inclusion (≤).
In part (a), we show that (P(n), ≤) satisfies the properties of a poset. In part (b), we draw the Hasse diagram for P(6) to illustrate the partial order. Whether (P(n), ≤) forms a lattice for all n depends on the specific values of n.
a) To show that (P(n), ≤) is a poset, we need to verify three properties:
Reflexivity: Every partition is included in itself, so for any partition A in P(n), A ≤ A.
Antisymmetry: If A ≤ B and B ≤ A, where A and B are partitions in P(n), then A = B.
Transitivity: If A ≤ B and B ≤ C, where A, B, and C are partitions in P(n), then A ≤ C.
These properties hold for the relation of set inclusion, thus establishing that (P(n), ≤) is a poset.
b) The Hasse diagram for P(6) represents the partial order of the partitions of 6. The partitions are depicted as nodes, with an upward-directed edge connecting A to B if A is included in B (A ≤ B). The diagram illustrates the hierarchy of partitions based on the inclusion relation.
Whether (P(n), ≤) forms a lattice for all n depends on whether it has both a least element (bottom element) and a greatest element (top element). For P(n), if n is greater than 1, there is no unique greatest element since there can be multiple ways to partition n. Therefore, (P(n), ≤) is not a lattice for all values of n.
Learn more about partially ordered set here:
https://brainly.com/question/32559065
#SPJ11
Which of the following best describes the vertical cross-section of the cylinder ?
A.
cone
B.
rectangle
C.
triangle
D.
circle
The shape that best describes the vertical cross-section of the cylinder is given by: Option B: Rectangle.
What is a vertical cross section?When you slice a given object vertically (perpendicular to the ground level), then the sliced surface is called vertical cross section.
For a cylinder, usually it sits on its base and we take a right circular cylinder. When we slice it vertically, we obtain a rectangle, as shown in the figure attached below.
It can be proven that this shape is always going to be rectangular.
Thus, the shape that best describes the vertical cross-section of the cylinder is given by: Option B: Rectangle.
Learn more about vertical cross section here:
https://brainly.com/question/16775837
Mr. Piper's plumbing needed
repairs. The plumber charged
$98 for parts plus $45 per hour
for labor. If the bill totaled $458,
how many hours of labor were
required?
Answer:
8 hours of labor at 45 dollars an hour, plus the 98 dollars for parts equal 458
Please awnser correctly! I will mark you as Brainliest!
A neighborhood in Shiloh is building a treehouse. It has a rectangle floor of 6 ft by 4 ft. What is the area of the tree house floor?
Answer:
24
Step-by-step explanation:
Shiloh is building a tree house
It's measurement is 6ft by 4ft
Therefore the area can be calculated as follows
= 6×4
= 24
Hence the area of the rectangle is 24
Find a formula for a geometric sequence that begins 100, 120, 144, ....
Answer:
[tex]b_{n} =b_{1} r^{n-1} =100*1.2^{n-1}[/tex]
Step-by-step explanation:
first number is [tex]b_{1} =100[/tex]
the cammon ratio is [tex]r=\frac{120}{100} =\frac{144}{120}=1.2[/tex]
so [tex]b_{n} =b_{1} r^{n-1} =100*1.2^{n-1}[/tex]
-12 x (1/3)? what is this equal to!
Answer:
-4
Step-by-step explanation:
Answer:
-4
Step-by-step explanation:
-12 times 1/3.
It's pretty much just -12x1, then divided by 3.
-12x1 is equal to -12.
Your equation is now simplified, making it easier to solve.
Your equation is: [tex]\frac{-12}{3}[/tex]
-12 divided by 3 is -4, because when a negative number is divided (or multiplied) by a positive number, the quotient (or product) is negative.
-12 x (1/3) = -12/3 = -4.
A coach ordered 20 practice jerseys for her soccer team. Six of the jerseys she ordered arrived late. What decimal represents the fraction of jerseys that arrived late?
Answer: 0.3
Step-by-step explanation:
There are 20 practice jerseys in total.
Six of those 20 jerseys arrived late.
The fraction of jerseys that arrived late is therefore:
= 6 / 20 jerseys
Convert them to decimal form by dividing the numerator with the denominator:
= 6 ÷ 20
= 0.3
Kora and Wallace planted a garden bed the size of the red square. How big is their garden bed? (Finding the area)
Answer: no sol
Step-by-step explanation:
bro there is no pic to do so im just going to say...
What is the area? Add the measurement of the shape. (ft, ft2, ft3,etc)
First to get it right gets brainliest
Answer:
24ft²
Step-by-step explanation:
Okay, so I don't understand what you're saying by the whole add the measurement thing, so if this is wrong, I'm very sorry.
Anyways, let's begin, the formula for the area of a triangle is base x height ÷ 2 so we just have to plug in our values:
12 x 4 = 48
48 ÷ 2 = 24
So the area of the triangle is 24ft²
hope this helps:)
You might need: Find the area of a circle with a circumference of 12.56 units.
Answer:
The area is 12.56 units^2 (same as circumference?)
Step-by-step explanation:
Assuming pi is 3.14, the equation for the circumference is C = 2 pi r
Fill it out for the radius (r)
12.56 = 2 3.14 r
12.56 = 6.28 r
r = 2
With the radius, the equation for the area is A = pi r^2
Fill it out for the area
A = 3.14 2^2
A = 3.14 4
A = 12.56
Legs are 5ft and 25ft what is the hypotenuse round to the nearest tenth
Answer:
15ft
Step-by-step explanation:
Find the area of the trapezoids
Answer:
48 square units
Step-by-step explanation:
Each square on the grid is 2 units by 2 units.
Bases: AT = 8; RS = 4
Height: 8
area = (b1 + b2)h/2
area = (8 + 4)(8)/2
area = 48 square units
Answer:
The area of trapezoid is 48 sq units.
Step-by-step explanation:
According to the question,
➻ Trapezoid is consist of many square shapes. Each grid square equals 2 units. We need to find the area of trapezoid.
➻ To find area we need to find the length if base and height of trapezoid.
Calculate the square grids to find base and height. we get.
Base ; SR = 4 units and TA = 8units
Height = 8 units.
Finding the area of trapezoid.
We know that,
Area of trapezoid = ( Base1 + Base2 ) ×Height / 2
plug the values of both base and a height.
Area of trapezoid = ( 4 + 8 ) × 8 / 2
Add the numbers which are in bracket and multiply by 8.
Area of trapezoid = 12 × 8 / 2 = 96/2
Divide 96 by 2.
Area of trapezoid = 48 sq units.
Hence,
The area of trapezoid is 48 sq units.
The cook at the Elmview School cafeteria made grilled chicken and fried chicken yesterday for lunch. He made 5 pieces of grilled chicken for every 2 pieces of fried chicken.
Pick the diagram that models the ratio in the story.
If the cook made 80 pieces of fried chicken, how many pieces of chicken did he make altogether?
The cook made 280 pieces of chicken altogether.
the diagram is like this :
Grilled chicken: [#####] [#####] [#####] [#####] [#####] ,
Fried chicken: [##] [##]
The ratio of grilled chicken to fried chicken is 5:2, which means for every 5 pieces of grilled chicken, the cook made 2 pieces of fried chicken.
To model this ratio, we can use a bar diagram with five sections for the grilled chicken and two sections for the fried chicken,
If the cook made 80 pieces of fried chicken, we can use this ratio to calculate the number of pieces of grilled chicken.
First, we need to find out how many sets of 5:2 there are in 80. We can do this by dividing 80 by 2 and then multiplying by 5:
80 ÷ 2 = 40
40 × 5 = 200
So the cook made 200 pieces of grilled chicken.
To find the total number of pieces of chicken, we just need to add the grilled and fried chicken together: 200 + 80 = 280 .
For such more questions on altogether
https://brainly.com/question/30599213
#SPJ8
Write (2/3)^2 in expanded form,
Answer:
4/9, or 0.4∞
but 0.4∞ has a repeating decimal, so the expanded form is ∞ also
For this project, you will research setting up a food cart that sells one item (like hot dogs in buns) along with any condiments (like catsup, mustard, relish, onions, etc.) and necessary serving products (like napkins, plates, containers/wrapping foil, etc.) You may pick any food item of your choice. You will determine your total cost function, revenue function, profit function, and find your break-even point(s).
Variable(s): Very clearly define your variable(s) and be specific. For example, if you say "x
2. Total Cost: Research and determine your total cost function. Your cost function should include the cost of the cart, cost of paying employees, cost of the food and supplies for the cart, etc. Fully explain how you arrived at your cost function. Provide information/links in how you determined what your supplies and materials cost. (You may ignore the cost of permits, taxes, and city fees.)
3. Marginal Cost: Determine your marginal cost function. In your own words, explain what your marginal cost function tells you. How is this different from what your total cost function tells you?
4. Revenue: Determine your revenue function. Explain how you arrived at this function.
5. Profit: Determine your profit function. Explain how you arrived at this function.
For this project, I will choose the food item to be "Gourmet Burgers." Now let's go through each step as outlined.
1. Variable(s):
- x: Number of gourmet burgers sold
2. Total Cost:
The total cost function includes various components:
- Cost of the food ingredients for each gourmet burger
- Cost of the buns, condiments, and other toppings
- Cost of the cart and any necessary equipment
- Cost of paying employees
- Cost of serving products like napkins, plates, and containers
To determine the cost function, I would research the prices of the food ingredients, condiments, buns, and other supplies needed for each gourmet burger. I would also consider the cost of the cart, equipment, and estimated wages for the employees. By summing up all these costs, I can derive the total cost function.
3. Marginal Cost:
The marginal cost function represents the change in total cost when one additional gourmet burger is produced and sold. It can be calculated by taking the derivative of the total cost function with respect to the variable x (number of burgers sold). The marginal cost function provides insights into how the cost per unit changes as the production level increases.
The marginal cost function tells us how much it costs to produce and sell one additional gourmet burger, considering factors like additional ingredients, labor, and supplies required. It helps in making decisions regarding production levels and pricing.
4. Revenue:
The revenue function is determined by multiplying the price per gourmet burger by the number of burgers sold. The price per gourmet burger can be determined based on market research, competition, and desired profit margin. Multiplying this price by the number of burgers sold gives the revenue generated from sales.
5. Profit:
The profit function is obtained by subtracting the total cost function from the revenue function. It represents the financial gain or loss from selling a certain number of gourmet burgers. The profit function helps in assessing the profitability of the food cart business and making decisions related to pricing, cost management, and production levels.
To find the break-even point(s), we set the profit function equal to zero and solve for the number of gourmet burgers sold that result in zero profit. The break-even point is the production level where the revenue equals the total cost, indicating that no profit or loss is incurred.
It's important to note that the specific values and calculations for the cost, revenue, and profit functions would require extensive research, market analysis, and consideration of various factors such as local market conditions, ingredient prices, labor costs, and other operational expenses.
Learn more about marginal cost:
https://brainly.com/question/17230008
#SPJ11
Please help me, it's due today. I'll give 86 points to someone who answers and writes the problem step by step.
A 14 -in. diameter pizza is cut into 6 equal sides. About how many square inches of pizza are on each slice? Round to the nearest square inch.
Answer:
here go the answer hope it help
Step-by-step explanation: