The pebble will fall an additional 490 meters in the next 10.0 seconds.
To calculate the distance the pebble drops in the next 10.0 seconds, we can use the equation of motion for free fall:
h = (1/2) * g * t²
Where:
h is the distance fallen
g is the acceleration due to gravity (approximately 9.8 m/s²)
t is the time elapsed
In the given scenario, the pebble falls for 5.0 seconds and covers a distance of 122.5 m. We can use this information to find the initial velocity of the pebble. The equation for distance traveled during free fall is:
h = v₀ * t + (1/2) * g * t²
Rearranging the equation to solve for the initial velocity (v₀), we get:
v₀ = (h - (1/2) * g * t²) / t
v₀ = (122.5 - (1/2) * 9.8 * 5²) / 5
v₀ = (122.5 - 122.5) / 5
v₀ = 0 m/s
Since the initial velocity is 0 m/s, the pebble is dropped from rest. Now we can calculate the distance the pebble will fall in the next 10.0 seconds:
h = (1/2) * g * t²
h = (1/2) * 9.8 * 10²
h = 490 m
Learn more about fall here:
https://brainly.com/question/29610799
#SPJ11
True or False: A balanced force acts on different objects, and action-
eaction forces act on the same object. *
A. True
B. False
Answer:
true
Explanation:
according to the Newton's third law
Explain why is the temperature of a hot tea higher than the temperature of iced tea?
Answer:
Because the hot tea is hot from a microwave or coffee machine when iced tea is cold from ice in the tea.
Explanation:
A 29 kg child jumps to the ground from the top of a fence that is 1.8 m high. You analyze the problem using upward as the positive x direction.
A. Taking x=0 to be at the bottom of the fence, what are the initial potential energy of the child-Earth system and the chnage in the system kinetic energy during the jump? (Ui , change of U)
B.Repeat the previous part for x=0 at the top of the fence (Ui , change of U)
The initial potential energy of the child-Earth system is 509.4 J, and the change in system kinetic energy during the jump is 509.4 J.
In the first scenario, with x=0 at the bottom of the fence, we can calculate the initial potential energy (Ui) using the formula Ui = mgh, where m is the mass of the child (29 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the fence (1.8 m). Substituting the values, Ui = 29 kg × 9.8 m/s^2 × 1.8 m = 509.4 J.
Since there is no external work done on the child during the jump, the change in system kinetic energy (change of U) is equal to the negative of the initial potential energy. Therefore, the change of U = -509.4 J.
In the second scenario, with x=0 at the top of the fence, the initial potential energy (Ui) is still the same, i.e., 509.4 J. However, since the child is starting from a higher position, the change in system kinetic energy (change of U) will be different. The change of U will still be equal to -509.4 J since it depends on the initial potential energy, regardless of the reference point.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
an iron anchor of density 7810.00 kg/m3 appears 152 n lighter in water than in air. (a) what is the volume of the anchor? (b) how much does it weigh in air
The volume of the anchor is approximately 0.0195 m^3. The weight of the anchor in air is approximately 1492 N.
To find the volume of the anchor, we can use Archimedes' principle, which states that the buoyant force experienced by an object submerged in a fluid is equal to the weight of the fluid displaced by the object.
Given that the anchor appears 152 N lighter in water than in air, we can equate this weight difference to the buoyant force experienced by the anchor in water.
Weight difference = Buoyant force
= Weight in air - Weight in water
Let's assume the weight of the anchor in air is W_air and the weight of the anchor in water is W_water.
W_air - W_water = 152 N
We know that weight = mass × acceleration due to gravity (W = m × g), and density is defined as mass divided by volume (ρ = m/V), where ρ is the density, m is the mass, and V is the volume.
Therefore, W_air = ρ_anchor × g × V × (1), and
W_water = ρ_water × g × V × (2).
Given that the density of water, ρ_water, is 1000 kg/m^3, and the density of the anchor, ρ_anchor, is 7810.00 kg/m^3, we can substitute these values into equations (1) and (2):
7810.00 × g × V - 1000 × g × V = 152
Simplifying the equation:
6810.00 × g × V = 152
V = 152 / (6810.00 × g)
Using the standard acceleration due to gravity, g = 9.8 m/s^2:
V = 152 / (6810.00 × 9.8)
≈ 0.0195 m^3
Therefore, the volume of the anchor is approximately 0.0195 m^3.
To calculate the weight of the anchor in air, we can use the formula:
Weight in air = ρ_anchor × g × V
Substituting the values:
Weight in air = 7810.00 × 9.8 × 0.0195
≈ 1492 N
Therefore, the weight of the anchor in air is approximately 1492 N.
The volume of the anchor is approximately 0.0195 m^3, and its weight in air is approximately 1492 N.
To know more about Archimedes' principle visit:
https://brainly.com/question/1155674
#SPJ11
if an object is projected vertically upward from ground level it rises to maimum height h. True or False
The statement is true. When one projects an object vertically upward from the ground, that object will reach a maximum height h before it is brought back down to earth by the force of gravity.
The laws of motion, more especially the principles of projectile motion, are the ones that rule over this behaviour. When the object is propelled forward, its initial velocity works against the gravitational pull, causing it to slow down until it reaches its highest point. This continues until the object has reached its highest position. After reaching this point, the object's velocity stops being positive and it begins a free fall towards the ground as a result of the force of gravity.
The initial velocity of the object, the angle at which it is launched, and the force of gravity all play a role in determining the maximum height h that it is possible to reach. Kinematic equations can be used to determine the answer to this question. It is essential to keep in mind, however, that the maximum height will also be determined by any external forces that are operating on the object, such as the resistance posed by the air.
To know more about gravity
https://brainly.com/question/940770
#SPJ4
Which graph BEST represents the relationship between the potential energy and kinetic energy of a cannon ball as it flies over the
bow of a ship and then falls onto the beach on the other side? Note that the dotted line represents potential energy while the solid
line represents kinetic energy
Answer:C
Explanation:I think sorry if it’s wrong
a hydrogen atom in the n=4 state decays to the n=1 state. what is the wavelength of the photon that the hydrogen atom emits? use hc=1240 nm ev.
A hydrogen atom in the n=4 state decays to the n=1 state. The wavelength of the photon that the hydrogen atom emits is 97.2 nm.
To calculate the wavelength of the photon emitted when a hydrogen atom transitions from the n=4 state to the n=1 state, we can use the Rydberg formula:
1/λ = R * (1/n₁² - 1/n₂²)
Where:
λ is the wavelength of the photon
R is the Rydberg constant for hydrogen (approximately 1.097 x 10⁷ m⁻¹)
n₁ is the initial energy level (n=4)
n₂ is the final energy level (n=1)
1/λ = 1.097 x 10⁷ m⁻¹ * (1/16 - 1)
1/λ = 1.097 x 10⁷ m⁻¹ * (-15/16)
λ = -0.972×10⁷ m⁻¹
Since wavelength cannot be negative, we take the absolute value
λ ≈ 97.2 nm.
Therefore, the wavelength of the photon emitted by the hydrogen atom is approximately 97.2 nm.
To know more about hydrogen atom here
https://brainly.com/question/30886690
#SPJ4
during each cycle, a heat engine ejects 75 j of thermal energy for every 115 j of input thermal energy. this engine is used to lift a 375 kg load a vertical distance of 27.0 m at a steady rate of 52.5 mm/s. how many cycles of the engine are needed to accomplish this task?
Hence, 1309 cycles of the engine are needed to accomplish this task.
Given values:
Work done = Force × Distance moved = mgh,
Force = mg = 375 × 9.8 = 3675 N,
Distance moved, s = 27 m
Rate of work = Power = Work done ÷ time
Rate of work = Fs/t
rate of work = 3675 × 0.0525
rate of work = 193.69 W.
Potential energy = Work done = mgh = 375 × 9.8 × 27 = 98175 J.
Heat ejected by the engine per cycle = 75 J, Heat input to the engine per cycle = 115 J.
We can find the number of cycles of the engine needed to accomplish this task by dividing the potential energy by the amount of heat ejected per cycle.
Therefore: Number of cycles = Potential energy ÷ Heat ejected per cycle= 98175 ÷ 75 = 1309 cycles.
to know more about thermal energy visit:
https://brainly.com/question/3022807
#SPJ11
Please help me if you can.
I can't figure out how the answer for number 30 is C and 31 is C. My question is how did they get that answer?
Answer:
30. $3.85
31. $2.22
Explanation:
30. The time duration of the kitchen clock is left on = All day = 24 hours
The power rating of the kitchen clock, P = 4 watts
The electricity cost in Alberta, R = $0.11 per kilowatt hour
The total number of hours the kitchen clock is on during the year, 't', is given as follows;
t = Number of hours per day × Number of days per year
∴ t = 24 hours/day × 365 days/year = 8,760 hours
The energy consumption of the kitchen clock, per year, E = P × t
∴ E = 4 watts × 8,760 hours = 35,040 watts-hour = 35.040 kw·h
The cost of operating the clock in one year, C = E × R
∴ Operating cost for the kitchen clock
∴ C = 35.040 kw·h × $0.11/(kw·h) = $3.8544 ≈ $3.85
The cost of operating the clock in one year, C ≈ $3.85
31. The power rating of the ghetto blaster, P = 28 watts
The time duration the ghetto blaster was on during an average month = All day = 24 hours
The number of days during an average month, n = 30 days
The cost of electricity in Alberta, R = $0.11 per kilowatt hour
The time in hours the ghetto blaster was on, t = 30 days/month × 24 hours/day
∴ t = 720 hours per month
The cost of operating the ghetto blaster in one month, C = P × t × R
∴ C = 28 W × 720 hours × 1 kw·h/(1000 w·h)× $0.11/(kw·h) = $2.2176
∴ The cost of operating the ghetto blaster in one month, C ≈ $2.22
a 85-power refracting telescope has an eyepiece with a focal length of 4.8 cmcm. How long is the telescope
The estimated length of the refracting telescope is approximately 412.8 cm.
The magnification (M) of a telescope is given by the formula: M = focal length of the objective lens / focal length of the eyepiece. In this case, the magnification is 85, and the focal length of the eyepiece is 4.8 cm.
Rearranging the formula, we can find the focal length of the objective lens:
focal length of the objective lens = M × focal length of the eyepiece = 85 × 4.8 cm = 408 cm.
Now, to estimate the length of the telescope, we need to consider the formula for the total length of a refracting telescope:
total length = focal length of the objective lens + focal length of the eyepiece.
Substituting the values, we have:
total length = 408 cm + 4.8 cm = 412.8 cm.
Please note that the actual length of a refracting telescope depends on various factors, such as the design, focal lengths, and positioning of the lenses, which may differ from the assumptions made in this response.
Learn more about telescope:
https://brainly.com/question/18300677
#SPJ11
12. Which of the following statements is accurate?
A. If an object's velocity is changing, it's experiencing either acceleration or deceleration.
B. If an object's velocity decreases, then the object is accelerating
C. If an objects said to be decelerating, its velocity must be increasing,
D. If an object's velocity remains constant, its acceleration must be increasing.
Answer:
Option (a) is correct
Explanation:
The acceleration of an object is defined as the rate of change of velocity. Mathematically, it can be written as :
[tex]a=\dfrac{v-u}{t}[/tex]
Where
v and u are final and initial velocity
It is clear that if there is some change in velocity, it means the object is experiencing either acceleration or deceleration. Hence, the correct option is (a).
Answer:
a
Explanation:
The distance between two cities A and B is 180 km. a car moved from the city A towards the city :
with a velocity of 25 Km/hr , at the same moment another car moved from the citv B towards the city A with a uniform velocity of 65 Km/hr. Then: when and where do the two cars meet?
The two cars will meet at a distance of 50 km from city A, and the meeting will occur 2 hours after they start moving.
To determine when and where the two cars meet, we need to calculate the time it takes for them to meet and then use that time to find the meeting location.
In this case:
Distance between cities A and B = 180 km
Velocity of the car starting from city A = 25 km/hr
Velocity of the car starting from city B = 65 km/hr
Let's assume the meeting point is at a distance of x km from city A. Since the total distance between the two cities is 180 km, the distance traveled by the car starting from city A is x km, and the distance traveled by the car starting from city B is (180 - x) km.
Using the formula:
Time = Distance / Velocity
The time taken by the car starting from city A to reach the meeting point is:
Time for car from A = x km / 25 km/hr = x/25 hr
The time taken by the car starting from city B to reach the meeting point is:
Time for car from B = (180 - x) km / 65 km/hr = (180 - x)/65 hr
Since the two cars meet at the same time, we can set their time equations equal to each other:
x/25 = (180 - x)/65
Now, we can solve this equation to find the value of x:
65x = 25(180 - x)
65x = 4500 - 25x
90x = 4500
x = 50
Therefore, the meeting point is 50 km from city A.
To find the time it takes for the cars to meet, we can substitute this value of x back into either of the time equations:
Time = Distance / Velocity
Time = 50 km / 25 km/hr
Time = 2 hours
So, the two cars will meet after 2 hours.
Learn more about distance here:
https://brainly.com/question/29771071
#SPJ11
a light ray can change direction when going from one material into another. that phenomenon is known as __________.
A light ray can change direction when going from one material to another. That phenomenon is known as refraction.
The phenomenon you are referring to is known as refraction. Refraction occurs when a light ray transitions from one medium to another, causing a change in its direction.
This change in direction is a result of the difference in the speed of light between the two media. When light passes through a medium with a different optical density or refractive index, it experiences a change in speed, causing the light ray to bend or deviate from its original path.
Refraction can be observed in various everyday situations. For example, when light travels from air into water or glass, it undergoes refraction.
The bending of light at the interface between these media is responsible for phenomena like the apparent shift in position of objects submerged in water, the bending of a pencil when placed in a glass of water, or the formation of rainbows.
The amount of bending that occurs during refraction depends on the angle at which the light ray enters the interface and the refractive indices of the two media involved.
Snell's law, which describes the relationship between the incident angle, the refracted angle, and the refractive indices, governs the behavior of light during refraction.
Refraction plays a crucial role in various optical devices, including lenses, prisms, and fiber optics. Understanding and controlling the phenomenon of refraction is essential in fields such as optics, physics, and engineering, enabling the development of technologies and applications that rely on manipulating light for imaging, communication, and scientific research.
Learn more about light ray:
https://brainly.com/question/28908118
#SPJ11
derive the error propagation equation for δk (the kinetic energy).
The error propagation equation for δk (the kinetic energy) is:
δk = √((1/4v^4) * δm² + m²v² * δv²).
To derive the error propagation equation for δk (the kinetic energy), we first need to understand what error propagation is.
Error propagation is a method used to estimate the uncertainty of a quantity that is derived from several other measured quantities that have uncertainties. In other words, it is a way to determine how the errors of the input quantities affect the error of the output quantity.
Now let's derive the error propagation equation for δk (the kinetic energy):
The kinetic energy (k) of an object can be calculated using the following equation:
k = 1/2mv^2
Where m is the mass of the object and v is its velocity.
We can use the standard error propagation formula to find the uncertainty in k.
This formula is given as:
δk = √((∂k/∂m)² * δm² + (∂k/∂v)² * δv²)
where δm and δv are the uncertainties in the measured values of m and v, respectively.
To find ∂k/∂m and ∂k/∂v, we need to take the partial derivatives of k with respect to m and v.
∂k/∂m = 1/2v²
∂k/∂v = mv
Now we can substitute these values in the error propagation equation:
δk = √((1/2v²)² * δm² + (mv)² * δv²)
Therefore, the error propagation equation for δk (the kinetic energy) is:
δk = √((1/4v^4) * δm² + m²v² * δv²)
To learn more about error propagation , visit:
https://brainly.com/question/30765830
#SPJ11
for the truss bridge shown, a) sketch the influence lines for the force in members be, bc, and da.
a) Sketching the influence lines for the force in members BE, BC, and DA in a truss bridge requires a visual representation. Influence lines show the variation of forces in a structure due to the movement of a load.
Please refer to structural engineering resources or software for accurate sketches and graphical representations of the influence lines for these specific members in a truss bridge. These resources will provide detailed illustrations based on the structural dimensions, member properties, and load positions. Influence lines are valuable tools for structural engineers as they help identify critical load positions, assess the structural response, and determine the maximum forces experienced by different members. Please consult reliable structural engineering references, textbooks, or appropriate software that specifically address truss bridge analysis and design to obtain accurate sketches of the influence lines for members BE, BC, and DA. These resources will provide the necessary diagrams and detailed explanations based on the specific truss bridge configuration and load positions.
To learn more about variation of forces, Click here:
https://brainly.com/question/30417230
#SPJ11
How does burning wood compare to the chemical reactions in trees that make them grow?
Answer:
Log burning in a fire. Burning wood is an example of a chemical reaction in which wood in the presence of heat and oxygen is transformed into carbon dioxide, water vapor, and ash.
Explanation:
basketball center steve tootall is 7 feet 2 inches in height. what is steve’s height in inches?
Steve Tootall's height is 86 inches. To calculate his height in inches, we convert feet to inches and then add the remaining inches.
Steve Tootall's height is given as 7 feet 2 inches. To calculate his height in inches, we convert feet to inches and then add the remaining inches.
1 foot is equal to 12 inches. So, 7 feet would be 7 * 12 = 84 inches.
Adding the remaining 2 inches, Steve's height in inches would be:
84 inches + 2 inches = 86 inches.
Therefore, Steve Tootall's height is 86 inches.
To learn more about Height click here
https://brainly.com/question/21836055
#SPJ11
A box m=87 kg is being pulled by a constant force F=124 N at an angle of θ =43 degrees. The initial speed of the box is zero. A 33\% Part (a) Write an expression for the work done by force F as the block moves a horizontal distance d. A3\% Part (b) How much work, in joules, was done in moving the block 4.1 m ? A 33% Part (c) What is the speed of the box at d=4.I m if the surface is frictionless?
Part (a) involves writing an expression for the work done by force F as the box moves a horizontal distance d. Part (b) requires calculating the amount of work done in moving the box 4.1 m. Part (c) asks for the speed of the box at a distance of 4.1 m, assuming a frictionless surface.
(a) The work done by a force is given by the formula W = Fd cos(θ), where W represents work, F is the force applied, d is the distance moved, and θ is the angle between the force and the displacement. In this case, since the force is applied horizontally ([tex]\theta[/tex] = 0), the expression for the work done by force F becomes W = Fd cos(0) = Fd.
(b) To calculate the work done in moving the box 4.1 m, we can substitute the given values into the equation from part (a). Thus, the work done is W = (124 N)(4.1 m)(cos 0) = 124 N * 4.1 m = 508.4 J (joules).
(c) If the surface is frictionless, the work done is converted entirely into kinetic energy. We can use the work-energy principle to find the speed of the box. The work done (508.4 J) is equal to the change in kinetic energy. Assuming the initial speed is zero, the final kinetic energy is 508.4 J. We can calculate the speed using the equation [tex]KE = (1/2)mv^2[/tex], where KE is the kinetic energy, m is the mass, and v is the speed. Rearranging the equation, [tex]v = \sqrt(2KE/m)[/tex]. Given the mass m = 87 kg, the speed at d = 4.1 m can be calculated.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
Can someone pls answer
Answer:
im still in elementry so you got to do it yo self
Explanation:
so me confused
Two stars, both of which behave like ideal blackbodies, radiate the same total energy per second. The cooler one has a surface temperature T and 2.0 times the diameter of the hotter star. Part A What is the temperature of the hotter star in terms of T? VO AED h ? TT = Submit Previous Answers Request Answer Part B What is the ratio of the peak-intensity wavelength of the hot star to the peak-intensity wavelength of the cool star? VO AED ? = Submit Request Answer Provide Feedback
The temperature of the hotter star ([tex]T_h[/tex]) is equal to the square root of the surface temperature of the cooler star (T), and the ratio of the peak-intensity wavelengths is proportional to the inverse cube of the temperature ratio.
Part A: Let's denote the temperature of the hotter star as [tex]T_h[/tex]. According to the Stefan-Boltzmann law, the total energy radiated by a blackbody is proportional to the fourth power of its temperature. Since both stars radiate the same total energy per second, we can write:
[tex]T_h^4 = T^4[/tex]
Taking the fourth root of both sides, we get:
[tex]T_h = T^{(\frac {1}{4})}[/tex]
Part B: The peak intensity wavelength (λmax) of a blackbody radiation is inversely proportional to its temperature.
According to Wien's displacement law, we can express the ratio of peak-intensity wavelengths ([tex]\lambda_{max, hot}/ \lambda_{max, cool}[/tex]) as the ratio of their temperatures:
[tex]\frac{\lambda_{max, hot}}{ \lambda_{max, cool}} = \frac{T_h}{T}[/tex]
Substituting the relationship we derived in Part A, we have:
[tex]\frac{\lambda_{max, hot}}{ \lambda_{max, cool}} = \frac{T^{\frac{1}{4}} }{T}[/tex]
Simplifying, we get:
[tex]\frac{\lambda_{max, hot}}{ \lambda_{max, cool}} = T^{\frac{-3}{4}} }[/tex]
Learn more about wavelength here:
https://brainly.com/question/30532991
#SPJ4
A video game regularly costs $29.95 is on sale for 15% off. About how much is the sale price of the game is you include 8% sales tax?
Answer:
Hereeeeeeeeeeeeeeeeeee
the focal length of a converging lens is 0.50 meters. an object is placed 1.0 meters from the lens. the distance between the lens and the image is
The distance between the lens and the image is 1.0 meter.
To find the distance between the lens and the image formed by a converging lens, we can use the lens formula:
1/f = 1/v - 1/u
Where:
f is the focal length of the lens
v is the distance of the image from the lens (positive if the image is on the same side as the observer, negative if the image is on the opposite side)
u is the distance of the object from the lens (positive if the object is on the same side as the observer, negative if the object is on the opposite side)
In this case:
Focal length (f) = 0.50 meters
Distance of the object (u) = 1.0 meter
Let's substitute the given values into the lens formula:
1/0.50 = 1/v - 1/1.0
2 = 1/v - 1
2v = v - 1
v = 1
Therefore, the distance between the lens and the image = 1.0 m.
Learn more about image distance here:
https://brainly.com/question/29659384
#SPJ11
In its elemental state, carbon is available as:
a
Coal
b Graphite
C Diamond
All of the above
Answer: D all of the above
Explanation: Coal, Graphite, Diamond are all allotropes of Carbon. Hope this helps :)
assume+that+kish+inc.+hired+you+as+a+consultant+to+help+estimate+its+cost+of+capital.+you+have+obtained+the+following+data:+d0+=+$0.90;+p0+=+$47.50;+and+g+=+7.00%
The cost of capital is the rate of return on a firm's investments that must be earned to meet the cost of financing. The cost of capital refers to the opportunity cost of making a specific investment. This opportunity cost is the rate of return that could have been earned by placing the same capital into a different investment that has equivalent risk.
Consultant is a professional who provides expert advice in a specific area such as management, accounting, human resources, and information technology. They provide guidance to an organization to assist them in improving their performance or solving particular problems.
The components of the cost of capital are the cost of debt and the cost of equity. Cost of DebtCost of debt is the interest rate that a firm pays on its debt. It is calculated as follows: Cost of debt = (Interest rate) x (1 - Tax rate)Here, D0 = $0.90, P0 = $47.50, and G = 7.00%.The current dividend is D0.
The next dividend is calculated as follows:D1 = D0 (1 + G) = $0.90 (1 + 0.07) = $0.963Dividend yield can be calculated as follows:Dividend yield = D1 / P0= $0.963 / $47.50= 0.0203 = 2.03%.
The cost of equity can be calculated using the following formula: Cost of Equity = (Dividend Yield) + (Growth Rate of Dividends).
Cost of Equity = 2.03% + 7.00% = 9.03%.
The cost of capital for Kish Inc. is the weighted average of the cost of debt and the cost of equity.
Learn more about cost of equity here ;
https://brainly.com/question/14409985
#SPJ11
A softball player is running at 4.88 m/sec when she slides into second base coming to a stop in .872 seconds. How far did she slide, and what was her acceleration?
Answer:
d=v1t - .5at^2
d=4.88 x .872 - 0.5 x (4.88/0.872) x 0.872^2
d=4.255 - 2.12
d= 2.135m
Explanation:
acceleration is negative because she is slowing down.
calculate the magnetic flux if the magnetic field vector is b=(-20 t)i (10 t)k and the area vector is a=(-50 m2)j (8 m2) k.
The magnetic flux if the magnetic field vector is b=(-20 t)i (10 t)k and the area vector is a=(-50 m2)j (8 m2) k is 1000 t j + 80 t k.
The magnetic flux is calculated as follows:
[tex]\phi = \vec{B} \cdot \vec{A}[/tex]
where
B is the magnetic field vector,
A is the area vector, and ϕ is the magnetic flux.
In this case, we have:
[tex]\vec{B} = (-20 t)i + (10 t)k[/tex]
and
[tex]\vec{A} = (-50 m^2)j + (8 m^2) k[/tex]
Substituting these values into the equation for magnetic flux, we get:
[tex]\begin{aligned}\phi &= (-20 t)i + (10 t)k \cdot (-50 m^2)j + (8 m^2) k \\&= -20 t \cdot (-50 m^2)j + 10 t \cdot 8 m^2 k \\&= 1000 t j + 80 t k\end{aligned}[/tex]
Therefore, the magnetic flux is a vector with a magnitude of 1000t and a direction of j+k. Note that the magnetic flux is a scalar quantity, so the vector notation is only used to indicate the direction of the flux.
The magnetic flux can also be calculated as follows:
[tex]\phi = \int_A \vec{B} \cdot d\vec{S}[/tex]
where A is the area of the surface, and d
S is a small element of surface area. In this case, the area of the surface is a rectangle with dimensions 50×8 meters. The magnetic field is uniform, so we can calculate the magnetic flux as follows:
[tex]\begin{aligned}\phi &= \int_A \vec{B} \cdot d\vec{S} \\&= \int_{-50}^{50} \int_{-8}^8 (-20 t)i + (10 t)k \cdot dx dy \\&= \int_{-50}^{50} (-20 t) \cdot dy + \int_{-8}^8 (10 t) \cdot dx \\&= 1000 t j + 80 t k\end{aligned}[/tex]
The answer is: 1000 t j + 80 t k
To know more about the magnetic flux refer here :
https://brainly.com/question/15011681#
#SPJ11
I need help with one question on my homework. This is on the Specific Heat Capacity required practical.
Sample c has no solid residue left when evaporated. Suggest why it has a boiling point 1.7 degrees Celsius lower than distilled water.
Answer:
will mostly accord at the top of the boiling water my kind sir
Explanation:
Evaporation takes place only at the surface of a liquid, whereas boiling may occur throughout the liquid. In boiling, the change of state takes place at any point in the liquid where bubbles form. The bubbles then rise and break at the surface of the liquid.
2.00 × 1020electrons flow through a cross section of a 3.20-mm-diameter iron wire in 4.50 s .
part a
what is the electron drift speed?
The electron drift speed in the iron wire is approximately 4.49 mm/s. When electrons are subjected to an electric field they do move randomly, but they slowly drift in one direction, in the direction of the electric field applied. The net velocity at which these electrons drift is known as drift velocity.
The formula to calculate the electron drift speed is:
v_d = I / (n * A * q)
Where:
- v_d is the electron drift speed
- I is the electric current
- n is the number density of charge carriers (electrons)
- A is the cross-sectional area of the wire
- q is the charge of an electron
Given:
- I = 2.00 × 10^20 electrons
- Diameter of the wire = 3.20 mm
- Time = 4.50 s
First, we need to calculate the current (I) in Amperes:
I = (2.00 × 10^20 electrons) / (4.50 s)
I ≈ 4.44 × 10^19 A
Next, we need to determine the cross-sectional area (A) of the wire. The wire is cylindrical in shape, so we can use the formula for the area of a circle:
A = π * (diameter/2)^2
A = π * (3.20 mm/2)^2
A ≈ 8.03 mm^2
Converting the cross-sectional area to square meters:
A = 8.03 mm^2 * (1 m^2 / 1000 mm^2)
A ≈ 8.03 × 10^-6 m^2
The number density of charge carriers (n) is given by the ratio of the number of electrons (I) to the volume of the wire. Since we don't have the volume, we cannot calculate the exact number density. However, for a wire, the number density is typically on the order of 10^28 to 10^29 electrons per cubic meter.
Lastly, we know that the charge of an electron (q) is approximately 1.6 × 10^-19 C.
Using the formula for electron drift speed, we can calculate:
v_d = (4.44 × 10^19 A) / (10^28 electrons/m^3 * 8.03 × 10^-6 m^2 * 1.6 × 10^-19 C)
v_d ≈ 4.49 mm/s
Therefore, the electron drift speed in the iron wire is approximately 4.49 mm/s.
To know more about speed visit :
https://brainly.com/question/13943409
#SPJ11
The electric field strength is 5.50×10⁴ N/C inside a parallel-plate capacitor with a 2.30 mm spacing. A proton is released from rest at the positive plate.What is the proton's speed when it reaches the negative plate?
To determine the proton's speed when it reaches the negative plate, we can utilize the relationship between electric field, force, and acceleration.
The force experienced by a charged particle in an electric field is given by the equation F = qE, where F is the force, q is the charge of the particle, and E is the electric field strength. In this case, the proton has a charge of +e (1.6 × 10⁻¹⁹ C) and experiences a force in the direction of the electric field.
Using Newton's second law, F = ma, we can relate the force to the proton's acceleration (a) and mass (m). Since the proton is released from rest, its initial velocity (v₀) is zero. The distance traveled by the proton (d) is equal to the spacing of the parallel plates, which is 2.30 mm (2.30 × 10⁻³ m).
The force on the proton is F = qE = (1.6 × 10⁻¹⁹ C) × (5.50×10⁴ N/C) = 8.80 × 10⁻¹⁵ N. By equating the force to mass times acceleration, we have ma = 8.80 × 10⁻¹⁵ N.
Rearranging the equation to solve for acceleration, we get a = (8.80 × 10⁻¹⁵ N) / (m). The mass of a proton is approximately 1.67 × 10⁻²⁷ kg.
Substituting the values, we find the acceleration of the proton. Using the kinematic equation v² = v₀² + 2ad, we can find the final velocity (v) of the proton when it reaches the negative plate.
Since the initial velocity (v₀) is zero and the distance (d) is known, we can solve for the final velocity. Calculating the expression gives us the speed of the proton when it reaches the negative plate.
Learn more about Using Newton's second law here:
https://brainly.com/question/28261773
#SPJ11
Windows having double glass panes with some space between them is called double glazing. Why do windows in cold countries have double glazing?
options:
For the conduction of heat
For the convection of heat
For the radiation of heat
For the insulation of heat
Answer: for insulation of heat
Explanation:
Windows in cold countries have double glazing windows to provide a barrier against the outside temperature by creating a buffer zone between two glasses.
The air or any other gas-filled between the glasses act as an insulator and offer great resistance to outside temperature thereby maintaining the inside temperature intact.