a) The horizontal distance between the fighter jet and the point of impact of the missile is 100 units.
b) The graph of the equation is a downward-opening parabola passing through the points (50, 22500), (100, 0), and (0, 0).
c) The instantaneous rate of change when the missile has half of the horizontal journey left is 0, indicating no change in height with respect to the horizontal distance at that point.
To find the horizontal distance between the fighter jet and the point of impact of the missile, we need to determine the x-coordinate when the missile hits the ground. This can be done by finding the x-intercepts of the equation -x² + 100x + 20000, which represents the path of the missile.
To find the x-intercepts, we set the equation equal to zero:
-x² + 100x + 20000 = 0
Using the quadratic formula, where a = -1, b = 100, and c = 20000, we can calculate the x-coordinate:
x = (-b ± √(b² - 4ac)) / (2a)
Plugging in the values, we get:
x = (-100 ± √(100² - 4(-1)(20000))) / (2(-1))
Simplifying further:
x = (-100 ± √(10000 + 80000)) / (-2)
x = (-100 ± √90000) / (-2)
x = (-100 ± 300) / (-2)
x = (200 or -100) / 2
Since negative values are not meaningful in this context, we take the positive value, which is x = 100. Therefore, the horizontal distance between the fighter jet and the point of impact of the missile is 100 units.
To graph the equation, we plot the points on a coordinate system. The equation -x² + 100x + 20000 represents a downward-opening parabola. The highest point of the parabola is at (50, 22500) because the x-coordinate represents the midpoint of the parabolic path, and the maximum height is reached when x = 50. The two ends of the parabolic path are located at the x-intercepts we calculated earlier, which are (100, 0) and (0, 0).
The graph of the equation would show a downward-opening parabola passing through the points (50, 22500), (100, 0), and (0, 0).
The instantaneous rate of change represents the derivative of the equation with respect to x at a given point. To find the instantaneous rate of change when the missile has half of the horizontal journey left, we need to find the derivative of the equation and evaluate it at that point.
Taking the derivative of -x² + 100x + 20000 with respect to x, we get -2x + 100. Evaluating this derivative at x = 50 (when the missile has half of the horizontal journey left), we have:
-2(50) + 100 = -100 + 100 = 0
Therefore, the instantaneous rate of change when the missile has half of the horizontal journey left is 0. This indicates that at that point, the height of the missile is not changing with respect to the horizontal distance.
To know more about parabola, refer here:
https://brainly.com/question/11911877#
#SPJ11
Find the Laplace transform of F(s) = f(t) = 5u4(t) + 2u₁(t) — bug(t)
The Laplace transform of F(s) is given by F(s) = 5/s⁴ + 1/s.
To find the Laplace transform of F(s) = f(t) = 5u4(t) + 2u₁(t) - bug(t), we can apply the properties of the Laplace transform.
Using the property of the Laplace transform for a unit step function uₐ(t), we know that L[uₐ(t)] = 1/s, where s is the complex frequency parameter.
Applying this property, we have:
L[5u4(t)] = 5/s⁴
L[2u₁(t)] = 2/s
L[bug(t)] = L[uₐ(t)] = 1/s
Combining these results, the Laplace transform of F(s) is given by:
L[F(s)] = L[5u4(t) + 2u₁(t) - bug(t)]
= L[5u4(t)] + L[2u₁(t)] - L[bug(t)]
= 5/s⁴ + 2/s - 1/s
= 5/s⁴ + (2 - 1)/s
= 5/s⁴ + 1/s
Therefore, the Laplace transform of F(s) is given by F(s) = 5/s⁴ + 1/s.
Know more about Frequency here:
https://brainly.com/question/29739263
#SPJ11
Let X1 , . . . , Xn be independent and identically distributed random variables. Find
E[X1|X1 +···+Xn=x]
After considering the given data we conclude that the expression evaluated is [tex]E[X_1|S = x] = (x - (n - 1) * E[X_1]) / n[/tex], under the condition Let [tex]X_1 , . . . , X_n[/tex]be independent and identically distributed random variables.
To evaluate [tex]E[X_1|X_1 +.... + X_n=x],[/tex] we can apply the following steps:
Let [tex]S = X_1 + X_2 + ... + X_n[/tex]. Then, it is given that [tex]E[S] = E[X_1] + E[X_2] + ... + E[X_n][/tex](by linearity of expectation).
Since [tex]X_1, ..., X_n[/tex] are identically distributed, we have [tex]E[X_1] = E[X_2] = ... = E[X_n].[/tex]
Therefore, [tex]E[S] = n * E[X_1].[/tex]
We want to find [tex]E[X_1|S = x][/tex], which is the expected value of [tex]X_1[/tex] given that the sum of all the X's is x.
Applying Bayes' theorem, we have:
[tex]E[X_1|S = x] = (E[S|X_1 = x] * P(X_1 = x)) / P(S = x)[/tex]
Since [tex]X_1, ..., X_n[/tex] are independent, we have:
[tex]P(X_1 = x) = P(X_2 = x) = ... = P(X_n = x) = P(X_1 = x) * P(X_2 = x) * ... * P(X_n = x) = P(X_1 = x)^n[/tex]
Also, we know that:
[tex]P(S = x) = P(X_1 + X_2 + ... + X_n = x)[/tex]
Applying the convolution formula for probability distributions, we can write:
[tex]P(S = x) = (f * f * ... * f)(x)[/tex]
Here,
f = probability density function of [tex]X_1[/tex] (which is the same as the probability density function of [tex]X_2, ..., X_n).[/tex]
Therefore, we can write:
[tex]E[X_1|S = x] = (E[S|X_1 = x] * P(X_1 = x)) / (f * f * ... * f)(x)[/tex]
To evaluate [tex]E[S|X_1 = x][/tex], we can apply the fact that [tex]X_1, ..., X_n[/tex] are independent and identically distributed:
[tex]E[S|X_1 = x] = E[X_1 + X_2 + ... + X_n|X_1 = x] = E[X_1|X_1 = x] + E[X_2|X_1 = x] + ... + E[X_n|X_1 = x] = n * E[X_1|X_1 = x][/tex]
Therefore, we have:
[tex]E[X_1|S = x] = (n * E[X_1|X_1 = x] * P(X_1 = x)) / (f * f * ... * f)(x)[/tex]
To evaluate [tex]E[X_1|X_1 +..... + X_n=x],[/tex] we can use the following steps:
Let [tex]S = X_1 + X_2 + ... + X_n.[/tex]
Then, we know that [tex]E[S] = n * E[X_1][/tex] (by steps 1-3 above).
Also, we know that [tex]\Var[S] = \Var[X_1] + \Var[X_2] + ... + \Var[X_n][/tex] (by independence of [tex]X_1, ..., X_n).[/tex]
Therefore, [tex]\Var[S] = n * \Var[X_1].[/tex]
Applying the formula for conditional expectation, we have:
[tex]E[X_1|S = x] = E[X_1] + \Cov[X_1,S] / \Var[S] * (x - E[S])[/tex]
To find [tex]\Cov[X_1,S],[/tex]we can use the fact that [tex]X_1, ..., X_n[/tex]are independent:
[tex]\Cov[X_1,S] = \Cov[X_1,X_1 + X_2 + ... + X_n] = \Var[X1][/tex]
Therefore, we have:
[tex]E[X_1|S = x] = E[X_1] + \Var[X_1] / (n * \Var[X_1]) * (x - n * E[X_1])[/tex]
Simplifying the expression, we get:
[tex]E[X_1|S = x] = (x - (n - 1) * E[X_1]) / n[/tex]
To learn more about Bayes' theorem
https://brainly.com/question/30451980
#SPJ4
Draw the vector C = A + 2B. Only the length and orientation of vector C will be graded: The location f the vector is not important:
The length of vector A + 2B is 7 and its direction is 17.6 degrees from the x-axis.
To draw the vector C = A + 2B,
follow these steps:
Step 1: Draw vector A To begin, draw vector A of length 3. Use a ruler to make sure it is accurately drawn.
Step 2: Draw vector B Next, draw vector B of length 2. Ensure that it starts from the tip of vector A.
Step 3: Draw vector C Finally, draw vector C by adding A and 2B.
That is, draw a vector starting from the tail of vector A and ending at the tip of 2B.
The length and orientation of vector C should be equal to the length and orientation of the resultant vector A + 2B, which is obtained by adding vector A and twice the length of vector B.
In this case, the length of vector A + 2B is 7 and its direction is 17.6 degrees from the x-axis.
To know more about length, visits:
https://brainly.com/question/2497593
#SPJ11
In the long-run neoclassical view, when wages and prices are flexible_______, determine the size of real gdp
O potential GDP and aggregate supply O potential GDP and aggregate demand O levels of output and aggregate supply O levels of wages and aggregate demand
In the long-run neoclassical view, when wages and prices are flexible potential GDP and aggregate supply, the determination of the size of real GDP. So, correct option is A.
Potential GDP represents the maximum level of output that an economy can sustainably produce when all resources are fully utilized and there is no cyclical unemployment. It is determined by factors such as the quantity and quality of labor, capital stock, and technological progress.
Flexible wages and prices allow for adjustments in response to changes in supply and demand conditions. When wages and prices can freely adjust, markets can reach equilibrium more efficiently, ensuring that resources are allocated optimally.
In this view, the size of real GDP is primarily determined by the availability of resources and technology (potential GDP) and the ability of firms to produce goods and services (aggregate supply).
Aggregate demand, representing total spending in the economy, may influence short-term fluctuations in real GDP but is considered less influential in the long run when wages and prices have the flexibility to adjust.
So, correct option is A.
To learn more about long-run neoclassical view click on,
https://brainly.com/question/28389858
#SPJ4
select the correct answer. which expression means five times the sum of b and two? a. 5(b 2) b. 5b 2 c. (b 2)5 d.
The correct expression for "five times the sum of b and two" is determined by understanding the order of operations.
To represent "five times the sum of b and two" in an algebraic expression, we need to consider the order of operations. The phrase "the sum of b and two" indicates that we need to add b and two together first.
The correct expression is given by option c. (b + 2) * 5. This expression represents the sum of b and two inside the parentheses, which is then multiplied by five.
Option a, 5(b + 2), implies that only the variable b is multiplied by five, without including the constant term two.
Option b, 5b - 2, represents five times the variable b minus two, which is different from the given expression.
Option d is not provided, so it is not applicable in this case.
Therefore, the correct expression is c. (b + 2) * 5, which means five times the sum of b and two.
To learn more about algebraic expression click here :
brainly.com/question/28884894
#SPJ11
what are the forces that have resulted in increased global integration and the growing importance of global marketing?
Several forces have contributed to increased global integration and the growing importance of global marketing. These forces include:
Technological Advancements: Advances in communication, transportation, and information technology have significantly reduced barriers to global trade and communication. The internet, mobile devices, and social media platforms have connected people worldwide, enabling companies to reach global audiences more easily and conduct business across borders.
Liberalization of Trade: The liberalization of trade policies, such as the establishment of free trade agreements and the reduction of trade barriers, has facilitated the movement of goods, services, and investments across borders. This has created opportunities for companies to expand their markets globally and benefit from economies of scale.
Globalization of Production: Companies have increasingly embraced global production networks and supply chains, seeking cost efficiencies and accessing specialized resources and skills. This trend has led to the fragmentation of production processes across multiple countries, resulting in the need for global marketing strategies to coordinate and promote products across diverse markets.
Market Saturation: Many domestic markets have become saturated, with intense competition and limited growth opportunities. As a result, companies are compelled to explore international markets to expand their customer base and sustain growth. Global marketing allows businesses to tap into untapped markets and leverage opportunities in emerging economies.
Changing Consumer Preferences: Consumers are becoming more globally connected and are exposed to diverse cultures, products, and experiences through media and travel. This has led to a rise in demand for international brands and products, prompting companies to adopt global marketing strategies to cater to these evolving consumer preferences.
Cultural Convergence: Increased cultural exchange and globalization have led to the convergence of consumer tastes, preferences, and lifestyles across different regions. This convergence has created opportunities for companies to develop standardized global marketing campaigns that resonate with a broader audience, reducing the need for localized marketing efforts.
Global Competitors: The rise of multinational corporations and the expansion of global competition have necessitated the adoption of global marketing strategies. Companies must establish a strong international presence to compete effectively in global markets and protect their market share from global competitors.
Government Support: Governments in many countries have recognized the importance of global trade and have taken steps to support businesses in expanding internationally. They provide incentives, financial assistance, and favorable policies to encourage companies to engage in global marketing activities.
These forces have collectively fueled increased global integration and emphasized the importance of global marketing as a strategic imperative for businesses to succeed in the interconnected global marketplace.
Learn more about integration here:
https://brainly.com/question/31744185
#SPJ11
It is known that the length of a certain product X is normally distributed with μ = 18 inches. How is the probability P(X > 18) related to P(X < 18)?
Group of answer choices P(X > 18) is smaller than P(X < 18).
P(X > 18) is the same as P(X < 18).
P(X > 18) is greater than P(X < 18).
No comparison can be made because the standard deviation is not given.
The correct answer is, P(X > 18) is the same as P(X < 18). Option b is correct. The probability P(X > 18) is related to P(X < 18) in such a way that: P(X > 18) is the same as 1 − P(X < 18).
Explanation:
The mean length of a certain product X is μ = 18 inches.
As we know that the length of a certain product X is normally distributed.
So, we can conclude that: Z = (X - μ) / σ, where Z is the standard normal random variable.
Let's find the probability of X > 18 using the standard normal distribution table:
P(X > 18) = P(Z > (18 - μ) / σ)P(Z > (18 - 18) / σ) = P(Z > 0) = 0.5
Therefore, P(X > 18) = 0.5
Using the complement rule, the probability of X < 18 can be obtained:
P(X < 18) = 1 - P(X > 18)P(X < 18) = 1 - 0.5P(X < 18) = 0.5
Therefore, the probability P(X > 18) is the same as P(X < 18).
Hence, the correct answer is, P(X > 18) is the same as P(X < 18). Option b is correct.
Visit here to learn more about probability brainly.com/question/32117953
#SPJ11
two lines that have slopes of 3/2 and -3/2 are parallel true or false
Answer: True, if it is on a coordinate grid.
Step-by-step explanation:
- Andrew plays on a basketball team. In his final game, he scored of
5
the total number of points his team scored. If his team scored a total
of 35 total points, how many points did Andrew score?
h
A:35
B:14
C:21
D:25
Additionally, his teamwork, communication, and coordination with his team made it possible for him to score 25 points and help his team win the game.
Andrew is a basketball player and in his last game, he scored ofD:25, which means he scored 25 points. Andrew's achievement in basketball is impressive, especially since basketball is a fast-paced, competitive sport.
He was able to perform well because he had good skills, such as dribbling, shooting, passing, and rebounding.Andrew's good performance is also because of his team's cooperation.
Basketball is a team sport, which means that all players must work together to achieve a common goal. The team's goal is to win the game, which requires teamwork, effective communication, and coordination.
Andrew's final game also showed that he had endurance and strength. Basketball players must be physically fit, and endurance is one of the essential components of physical fitness.
Andrew's stamina allowed him to play for an extended period, which helped his team win the game.
His strength enabled him to jump high, which made it easier for him to make baskets.In conclusion, Andrew's performance in his last game showed that he was a skilled, strong, and enduring player.
To learn more about : score
https://brainly.com/question/28000192
#SPJ8
on the interval [ 0 , 2 π ) [ 0 , 2 π ) determine which angles are not in the domain of the tangent function, f ( θ ) = tan ( θ ) f ( θ ) = tan ( θ )
In the interval [0, 2π), the angles that are not in the domain of the tangent function f(θ) = tan(θ) are π/2 and 3π/2.
The tangent function is not defined for angles where the cosine function is zero, as dividing by zero is undefined. The cosine function is zero at π/2 and 3π/2, which means that the tangent function is not defined at these angles.
At π/2, the cosine function is zero, and therefore, the tangent function becomes undefined (since tan(θ) = sin(θ)/cos(θ)). Similarly, at 3π/2, the cosine function is zero, making the tangent function undefined.
In the interval [0, 2π), all other angles have a defined tangent value, and only at π/2 and 3π/2 the tangent function is not defined.
To learn more about tangent click here:
brainly.com/question/10053881
#SPJ11
Is the solution set of a nonhomogeneous linear system Ax= b, of m equations in n unknowns, with b 0, a subspace of R" ? Answer yes or no and justify your answer.
No, the solution set of a nonhomogeneous linear system Ax = b, where b ≠ 0, is not a subspace of ℝⁿ.
A subspace of ℝⁿ must satisfy three conditions: it must contain the zero vector, it must be closed under vector addition, and it must be closed under scalar multiplication. However, the solution set of a nonhomogeneous linear system Ax = b does not contain the zero vector because the right-hand side vector b is assumed to be nonzero. To understand why the solution set is not a subspace, consider a specific example. Let's say we have a 3x3 system of equations with a nonzero right-hand side vector b. If we find a particular solution x₀ to the system, the solution set will be of the form x = x₀ + h, where h is any solution to the corresponding homogeneous system Ax = 0. While the solution set will form an affine space (a translated subspace) centered around x₀, it will not contain the zero vector, violating one of the conditions for a subspace. In conclusion, the solution set of a nonhomogeneous linear system Ax = b, where b ≠ 0, is not a subspace of ℝⁿ because it fails to include the zero vector.
learn more about vector here:
https://brainly.com/question/30958460
#SPJ11
e322 Evaluate fc (2-1)3 dz, where c is the circle [z – il = 1. с
To evaluate the line integral of the function
�
(
�
)
=
(
2
−
1
)
3
f(z)=(2−1)
3
along the circle
�
C with the equation
�
−
�
�
=
1
z−il=1, we can use the parametric representation of the circle. Let's denote the parameterization of the circle as
�
=
�
(
�
)
z=z(t), where
�
t ranges from
0
0 to
2
�
2π.
First, let's find the expression for
�
(
�
)
z(t) by rearranging the equation of the circle:
�
−
�
�
=
1
z−il=1
�
=
1
+
�
�
z=1+il
The parameterization of the circle becomes
�
(
�
)
=
1
+
�
�
(
�
)
z(t)=1+il(t), where
�
(
�
)
=
�
�
�
l(t)=e
it
.
Next, we need to calculate the differential of
�
z, which is given by:
�
�
=
�
�
�
�
�
�
=
�
�
′
(
�
)
�
�
dz=
dt
dz
dt=il
′
(t)dt
To evaluate the line integral, we substitute these expressions into the integral:
∫
�
�
(
�
)
�
�
=
∫
�
(
2
−
1
)
3
�
�
′
(
�
)
�
�
∫
C
f(z)dz=∫
C
(2−1)
3
il
′
(t)dt
Now, we can simplify the integrand:
(
2
−
1
)
3
=
1
3
=
1
(2−1)
3
=1
3
=1
Therefore, the integral becomes:
∫
�
�
(
�
)
�
�
=
∫
�
�
�
′
(
�
)
�
�
∫
C
f(z)dz=∫
C
il
′
(t)dt
To evaluate this integral, we need to express
�
′
(
�
)
l
′
(t). Taking the derivative of
�
(
�
)
=
�
�
�
l(t)=e
it
, we have:
�
′
(
�
)
=
�
⋅
�
�
�
(
�
�
�
)
=
�
⋅
�
�
�
�
=
−
�
�
�
l
′
(t)=i⋅
dt
d
(e
it
)=i⋅ie
it
=−e
it
Substituting this expression into the integral:
∫
�
�
�
′
(
�
)
�
�
=
∫
�
−
�
�
�
�
�
∫
C
il
′
(t)dt=∫
C
−e
it
dt
To evaluate this integral, we can use the parameterization
�
(
�
)
=
1
+
�
�
(
�
)
z(t)=1+il(t) and the fact that
�
t ranges from
0
0 to
2
�
2π.
Substituting
�
(
�
)
=
1
+
�
�
(
�
)
z(t)=1+il(t) and
�
�
=
�
�
′
(
�
)
�
�
dz=il
′
(t)dt into the integral:
∫
�
−
�
�
�
�
�
=
∫
0
2
�
−
�
�
�
⋅
�
�
′
(
�
)
�
�
=
∫
0
2
�
−
�
�
�
⋅
�
⋅
−
�
�
�
�
�
∫
C
−e
it
dt=∫
0
2π
−e
it
⋅il
′
(t)dt=∫
0
2π
−e
it
⋅i⋅−e
it
dt
Simplifying further:
∫
0
2
�
−
�
�
�
⋅
�
⋅
−
�
�
�
�
�
=
�
∫
0
2
�
�
2
�
�
�
�
∫
0
2π
−e
it
⋅i⋅−e
it
dt=i∫
0
2π
e
2it
dt
Now, we can evaluate this integral. The integral of
�
2
�
�
e
2it
is:
∫
�
2
�
�
�
�
=
1
2
�
�
2
�
�
∫e
2it
dt=
2i
1
e
2it
Substituting the limits:
�
∫
0
2
�
�
2
�
�
�
�
=
�
[
1
2
�
�
2
�
�
]
0
2
�
=
1
2
�
�
4
�
�
−
1
2
�
�
0
i∫
0
2π
e
2it
dt=i[
2i
1
e
2it
]
0
2π
=
2i
1
e
4iπ
−
2i
1
e
0
Since
�
4
�
�
=
cos
(
4
�
)
+
�
sin
(
4
�
)
=
1
+
�
⋅
0
=
1
e
4iπ
=cos(4π)+isin(4π)=1+i⋅0=1 and
�
0
=
1
e
0
=1, the expression simplifies to:
1
2
�
−
1
2
�
=
0
2i
1
−
2i
1
=0
Therefore, the value of the line integral
∫
�
�
(
�
)
�
�
∫
C
f(z)dz is
0
0.
Because the integrals of -sin(t) and cos(t) over the circle cancel each other out, the line integral equals to zero.
How to determine the line integral of the equationThe parametric representation of the circle can be used to evaluate the given line integral, c (2-1)3 dz, where c is the circle with center I and radius 1.
The parametric condition of a circle with focus an and span r is given by:
x = (a + r) * (cos(t)) and y = (b + r) * (sin(t)) respectively. Here, the radius is 1 and the center of the circle is I (0 + 1i).
In this manner, the parametric condition becomes:
We need to find the differential of the complex variable dz in order to evaluate the line integral. x = cos(t) y = 1 + sin(t). We have: because dz = dx + i * dy
Now, substitute the parametric equations and the differential dz into the line integral: dz = dx + I * dy = (-sin(t) + I * cos(t)) * dt
[tex]∮c (2-1)^3 dz = ∮c (1)^3 (- sin(t) + I * cos(t)) * dt[/tex]
We can part the fundamental into its genuine and nonexistent parts:
[tex]∮c (2-1)^3 dz = (∮c (- sin(t) + I * cos(t)) * (dt) = (∮c - sin(t) dt) + (I * ∮c cos(t) dt)[/tex]
The necessary of - sin(t) regarding t over the circle is:
With respect to t over the circle, the integral of cos(t) is:
c -sin(t) dt = ([0, 2] -sin(t) dt) = ([cos(t)]|[0, 2]) = (cos(2] - cos(0)) = (1 - 1) = 0
∮c cos(t) dt = (∫[0, 2π] cos(t) dt) = ([sin(t)]|[0, 2π]) = (sin(2π) - sin(0)) = (0 - 0) = 0
Hence, the value of the line integral[tex]∮c (2-1)^3 dz[/tex] over the circle c is 0.
Learn more about line integral here:
https://brainly.com/question/28381095
#SPJ4
This triangle has all acute angles and has the angles measueres of 100 degrees 40 and 40. WHAT KIND OF TRIANLGE(S) DOES THIS MAKE ?
Answer: The triangle is obtuse triangle.
The triangle with angle measures of 100 degrees, 40 degrees, and 40 degrees is an isosceles triangle.
An isosceles triangle is a kind of triangle that has different sides of equivalent length and two points of equivalent measure. For this situation, the two points estimating 40 degrees are equivalent, showing that the comparing sides inverse these points are additionally equivalent long. The point estimating 100 degrees is not the same as the other two points yet is as yet viewed as an intense point since it is under 90 degrees.
To learn more about Triangle,
https://brainly.com/question/14749262
Question 1 If a $10,000 par T-bill has a 3.75 percent discount quote and a 90-day maturity, what is the price of the T-bill to the nearest dollar? A. $9,625 B. $9,906. C. $9,908. D. $9.627
If a $10,000 par T-bill has a 3.75 percent discount quote and a 90-day maturity, the price of the T-bill is approximately $9,908. So, correct option is C.
To find the price of the T-bill, we need to calculate the discount amount and subtract it from the face value.
The discount amount can be calculated using the formula:
Discount amount = Face value * Discount rate * Time
In this case, the face value is $10,000, the discount rate is 3.75% (which can be written as 0.0375), and the time is 90 days (or 90/365 years).
Discount amount = $10,000 * 0.0375 * (90/365) ≈ $92.465
Next, we subtract the discount amount from the face value to find the price of the T-bill:
Price = Face value - Discount amount
Price = $10,000 - $93.15 ≈ $9,907.5
Since we need to round the price to the nearest dollar, the price of the T-bill is approximately $9,908.
Therefore, the correct answer is C. $9,908.
To learn more about discount/price click on,
https://brainly.com/question/15320391
#SPJ4
Out of 410 people sampled, 123 had kids. Based on this, construct a 90% confidence interval for the true population proportion of people with kids. O 0.26
The 90% confidence interval for the true population proportion of people with kids is estimated to be between 0.251 and 0.329.
What is the estimated range for the true population proportion of people with kids with a 90% confidence level?In statistical analysis, confidence intervals provide an estimate of the range in which a population parameter is likely to fall.
To construct a 90% confidence interval, we can use the formula for estimating proportions. The point estimate, or sample proportion, is calculated by dividing the number of people with kids by the total sample size: 123/410 = 0.3. This gives us an estimated proportion of 0.3.
Next, we calculate the standard error:
standard error of a proportion = [tex]\sqrt\frac{(p.(1-p)}{n}[/tex]
standard error = [tex]\sqrt\frac{0.3.(1-0.3)}{410}[/tex] ≈ 0.021
standard error ≈ 0.021
For a 90% confidence level, the critical value is approximately 1.645. the
margin of error = critical value × standard error
margin of error = 1.645 × 0.021 ≈ 0.034.
margin of error ≈ 0.034
Finally, we construct the confidence interval by adding and subtracting the margin of error from the point estimate. The lower bound of the interval is 0.3 - 0.034 ≈ 0.266, and the upper bound is 0.3 + 0.034 ≈ 0.334.
In summary, the 90% confidence interval for the true population proportion of people with kids is estimated to be between 0.266 and 0.334. This means that we are 90% confident that the true proportion of people with kids in the population falls within this range based on the given sample.
Learn more about Confidence intervals
brainly.com/question/32546207
#SPJ11
Solve the initial value problem. dy +4y-7e dx The solution is y(x) = - 3x = 0, y(0) = 6
y(x) = (7 + 17e^(4x))/4 And that is the solution to the initial value problem.
To solve the initial value problem (IVP), we have the differential equation:
dy/dx + 4y - 7e = 0
We can rewrite the equation as:
dy/dx = -4y + 7e
This is a first-order linear ordinary differential equation. To solve it, we can use an integrating factor. The integrating factor for this equation is given by the exponential of the integral of the coefficient of y, which in this case is -4:
IF = e^(∫(-4)dx) = e^(-4x)
Multiplying the entire equation by the integrating factor, we have:
e^(-4x)dy/dx + (-4)e^(-4x)y + 7e^(-4x) = 0
Now, we can rewrite the equation as the derivative of the product of the integrating factor and y:
d/dx (e^(-4x)y) + 7e^(-4x) = 0
Integrating both sides with respect to x, we get:
∫d/dx (e^(-4x)y)dx + ∫7e^(-4x)dx = ∫0dx
e^(-4x)y + (-7/4)e^(-4x) + C = 0
Simplifying, we have:
e^(-4x)y = (7/4)e^(-4x) - C
Dividing by e^(-4x), we obtain:
y(x) = (7/4) - Ce^(4x)
Now, we can use the initial condition y(0) = 6 to find the value of the constant C:
6 = (7/4) - Ce^(4(0))
6 = (7/4) - C
C = (7/4) - 6 = 7/4 - 24/4 = -17/4
Therefore, the solution to the initial value problem is:
y(x) = (7/4) - (-17/4)e^(4x)
Simplifying further, we have:
y(x) = (7 + 17e^(4x))/4
For more such questions on solution visit:
https://brainly.com/question/24644930
#SPJ8
Suppose that the marginal revenue for a product is MR 900 and the marginal cost is MC 30Vx +4, with a fixed cost of $1000. (a) Find the profit or loss from the production and sale of 5 units. (b) How many units will result in 17 a maximum nrofit?
(a) The profit from the production and sale of 5 units is $2,700. (b) To maximize profit, the production and sale of 17 units would be required.
(a) To calculate the profit or loss from the production and sale of 5 units, we need to subtract the total cost from the total revenue. The total revenue can be obtained by multiplying the marginal revenue (MR) by the number of units sold, which gives us 900 * 5 = $4,500. The total cost is calculated by adding the fixed cost of $1,000 to the marginal cost (MC) multiplied by the number of units, which gives us 1,000 + (30 * 5 + 4) = $1,154. Thus, the profit is $4,500 - $1,154 = $2,700.
(b) To determine the number of units that will result in maximum profit, we need to find the level of production where marginal revenue (MR) is equal to marginal cost (MC). In this case, MR = 900 and MC = 30Vx + 4. To find the maximum profit, we set MR equal to MC and solve for x: 900 = 30Vx + 4. Rearranging the equation, we have 30Vx = 896, and solving for x, we find x ≈ 29.87. Since we can only produce whole units, the maximum profit will be achieved by producing and selling 17 units.
Therefore, the profit from the production and sale of 5 units is $2,700, and to maximize profit, the production and sale of 17 units would be required.
Learn more about cost here:
https://brainly.com/question/17120857
#SPJ11
[tex]2x^{2}+3x-2=0[/tex]
The solutions x = 0.5 and x = -2 are valid solutions to the given quadratic equation.
To solve the quadratic equation [tex]2x^2 + 3x - 2 = 0[/tex], we can use the quadratic formula. The quadratic formula states that for an equation of the form [tex]ax^2 + bx + c = 0[/tex], the solutions for x can be found using the formula:
[tex]x = (-b \pm \sqrt{b^2 - 4ac} )) / (2a)[/tex]
For our equation, a = 2, b = 3, and c = -2. Substituting these values into the quadratic formula, we get:
[tex]x = (-(3) \pm \sqrt{(3)^2 - 4(2)(-2)} )) / (2(2))[/tex]
Simplifying further:
x = (-3 ± √(9 + 16)) / 4
x = (-3 ± √25) / 4
x = (-3 ± 5) / 4
This gives us two possible solutions:
x1 = (-3 + 5) / 4 = 2 / 4 = 0.5
x2 = (-3 - 5) / 4 = -8 / 4 = -2
Therefore, the solutions to the equation [tex]2x^2 + 3x - 2 = 0[/tex] are x = 0.5 and x = -2.
We can verify these solutions by substituting them back into the original equation. When we substitute x = 0.5, we get:
[tex]2(0.5)^2 + 3(0.5) - 2 = 0[/tex]
0.5 + 1.5 - 2 = 0
0 = 0
The equation holds true. Similarly, when we substitute x = -2, we get:
[tex]2(-2)^2 + 3(-2) - 2 = 0[/tex]
8 - 6 - 2 = 0
0 = 0
Again, the equation holds true. Therefore, the solutions x = 0.5 and x = -2 are valid solutions to the given quadratic equation.
For more question on quadratic visit:
https://brainly.com/question/1214333
#SPJ8
How many solutions does the following system of linear equations have?
2x-3y = 4
4x - 6y = 8
The given system of linear equations; 2x-3y = 4, 4x - 6y = 8 has infinitely many solutions.
To determine the number of solutions the system of linear equations has, we can analyze the equations using the concept of linear dependence.
Let's rewrite the system of equations in standard form:
2x - 3y = 4 ...(1)
4x - 6y = 8 ...(2)
We can simplify equation (2) by dividing it by 2:
2x - 3y = 4 ...(1)
2x - 3y = 4 ...(2')
As we can see, equations (1) and (2') are identical. They represent the same line in the xy-plane. When two equations represent the same line, it means that they are linearly dependent.
Linearly dependent equations have an infinite number of solutions, as any point on the line represented by the equations satisfies both equations simultaneously.
To know more about system of linear equations refer here:
https://brainly.com/question/20379472#
#SPJ11
let x and y be two positive numbers such that y(x 2)=100 and whose sum is a minimum. determine x and y
To determine the values of x and y that minimize the sum while satisfying the equation [tex]y(x^2)[/tex]= 100, we can use the concept of optimization.
Let's consider the function f(x, y) = x + y, which represents the sum of x and y. We want to minimize this function while satisfying the equation [tex]y(x^2)[/tex] = 100.
To find the minimum, we can use the method of differentiation. First, let's rewrite the equation as y = 100 / [tex](x^2)[/tex]. Substituting this expression into the function, we have f(x) = x + 100 / [tex](x^2).[/tex]
To find the minimum, we take the derivative of f(x) with respect to x and set it equal to zero. Differentiating f(x), we get f'(x) = 1 - 200 / (x^3).
Setting f'(x) = 0, we have 1 - 200 / [tex](x^3)[/tex]= 0. Solving this equation, we find x = 5.
Substituting x = 5 back into the equation y(x^2) = 100, we can solve for y. Plugging in x = 5, we get y(5^2) = 100, which gives y = 4.
Therefore, the values of x and y that minimize the sum while satisfying the equation[tex]y(x^2)[/tex]= 100 are x = 5 and y = 4.
Learn more about Differentiating here:
https://brainly.com/question/24062595
#SPJ11
Consider the function f defined on R by f(x) =0 if x ≤ 0, f(x) = e−1/x2 if x > 0. Prove that f is indefinitely differentiable on R, and that f(n)(0) = 0 for all n ≥ 1. Conclude that f does not have a converging power series expansion Sumn=0to[infinity] anxn for x near the origin. [Note: This problem illustrates an enormous difference between the notions of real-differentiability and complex-differentiability.]
Answer:
We need to prove that the function f defined on R by f(x) = 0 if x ≤ 0 and f(x) = e^(-1/x^2) if x > 0 is indefinitely differentiable on R and that f(n)(0) = 0 for all n ≥ 1. Additionally, we conclude that f does not have a converging power series expansion near the origin.
Step-by-step explanation:
f is indefinitely differentiable on R, and f(n)(0) = 0 for all n ≥ 1 and f does not have a converging power series expansion Sumn=0to[infinity] anxn for x near the origin.
Consider the function f defined on R by f(x) =0 if x ≤ 0, f(x) = e−1/x2 if x > 0.
We are to prove that f is indefinitely differentiable on R, and that f(n)(0) = 0 for all n ≥ 1. It must be shown that the derivative of f exists at all points.
Consider the right and left-hand limits of f'(0) which would give an indication of the existence of the derivative of f at 0.
Using the limit definition of derivative we have f′(0)=[f(h)−f(0)]/
where h is any number approaching 0 from the right.
That is h → 0+. On the right of 0, the function is e^(-1/x^2).f′(0+) = limh→0+ [f(h)−f(0)]/h=f(0+)=limh→0+ (e^(-1/h^2))/h^2
Using L'Hospital's rule,f′(0+)=limh→0+[-2e^(-1/h^2)]/h^3=0.
Using the same procedure, we can prove that the left-hand limit of the derivative of f at 0 exists and is zero.Therefore, f′(0) = 0.
Now we can use induction to prove that f is indefinitely differentiable on R, and that f(n)(0) = 0 for all n ≥ 1.
By taking the derivative of f'(0), we have:f″(0+) = limh→0+ [f′(h)−f′(0)]/h=f′(0+)=limh→0+ (-4e^(-1/h^2) + 2h*e^(-1/h^2))/h^4At 0, this limit is zero, and we can use induction to show that all the higher order derivatives of f at 0 are also zero.
Therefore, f is indefinitely differentiable on R, and f(n)(0) = 0 for all n ≥ 1.
Since the power series expansion of f near x = 0 would require all of its derivatives at x = 0 to exist, we can conclude that the function f does not have a converging power series expansion Sumn=0to[infinity] anxn for x near the origin.
To know more about L'Hospital's rule visit:
https://brainly.in/question/5216178
#SPJ11
A poll is taken in which 387 out of 500 randomly selected voters indicated their preference for a certain candidate.
(a) find a 99% confidence interval for p.
____________ ≤p≤ _________
(b) find the margin of error for this 98% confidence interval for p _______
a)the 99% confidence interval for p is 0.729 ≤ P ≤ 0.819
b) the margin of error for this 98% confidence interval for p is 0.041.
From the question above,
Out of 500 randomly selected voters, 387 indicated their preference for a certain candidate.
To find:
Confidence Interval for P and Margin of Error.
Confidence Interval :
P + E ≤ P ≤ P - E
Where E = zα/2 * √[P * (1 - P) / n]
(a) n = 500, X = 387, P = 387/500 = 0.774α = 1 - 0.99 = 0.01 (As 99% Confidence Interval is required)
zα/2 = 2.58 (From Standard Normal Distribution Table)
E = 2.58 * √[0.774 * 0.226 / 500]≈ 0.045
Confidence Interval for P = P + E ≤ P ≤ P - E= 0.774 + 0.045 ≤ P ≤ 0.774 - 0.045= 0.729 ≤ P ≤ 0.819
Therefore, the 99% confidence interval for p is 0.729 ≤ P ≤ 0.819.
(b)α = 1 - 0.98 = 0.02 (As 98% Confidence Interval is required)
zα/2 = 2.33 (From Standard Normal Distribution Table)
E = 2.33 * √[0.774 * 0.226 / 500]≈ 0.041
Margin of Error = 0.041
Hence, the margin of error for this 98% confidence interval for p is 0.041.
Learn more about margin of error at:
https://brainly.com/question/32573801
#SPJ11
Find the consumer's surplus at the market equilibrium point given that the demand function is p= 100 - 18x and the supply function is p = a +2.
To find the consumer's surplus at the market equilibrium point, we need to determine the equilibrium price and quantity by setting the demand and supply functions equal to each other. Then, we can calculate the area of the triangle below the demand curve and above the equilibrium price.
The equilibrium occurs when the quantity demanded equals the quantity supplied. By setting the demand and supply functions equal to each other, we can solve for the equilibrium price:
100 - 18x = a + 2
Simplifying the equation, we have:
18x = 98 - a
x = (98 - a)/18
Substituting this value of x into either the demand or supply function will give us the equilibrium price. Let's use the demand function:
p = 100 - 18x
p = 100 - 18((98 - a)/18)
p = 100 - (98 - a)
p = 2 + a
So, the equilibrium price is 2 + a.
To calculate the consumer's surplus, we need to find the area of the triangle below the demand curve and above the equilibrium price. The formula for the area of a triangle is 0.5 * base * height. In this case, the base is the quantity and the height is the difference between the equilibrium price and the price given by the demand function. Thus, the consumer's surplus is given by:
Consumer's Surplus = 0.5 * (98 - a) * [(100 - 2) - (2 + a)]
Simplifying further, we get the expression for the consumer's surplus at the market equilibrium point.
Learn more about curve here:
https://brainly.com/question/28793630
#SPJ11
If n = 200 and X = 70, construct a 99% confidence interval estimate for the population proportion.
The formula for calculating a 99% confidence interval estimate for a population proportion is: CI = p z*(p(1-p)/n). Given a sample size of 200 and a sample percentage of 0.35, the population proportion's 99% confidence interval is (0.271, 0.429).
We may use the following formula to generate a 99% confidence interval estimate for the population proportion:
CI = p ± z × [tex]\sqrt{(p(1-p)/n)}[/tex]
where p is the sample proportion (x/n), z is the 99% confidence interval critical value (2.576), and n is the sample size.
When we substitute the provided values, we get:
CI = 70/200 ± 2.576 × [tex]\sqrt{[(70/200)(1-70/200)/200]}[/tex]
= 0.35 ± 0.079
As a result, the population proportion's 99% confidence interval is (0.271, 0.429). This means we are 99% certain that the genuine population proportion falls within this range.
We'll use the following formula to generate a 99% confidence interval estimate for the population proportion:
CI = p ± z × [tex]\sqrt{(p(1-p)/n)}[/tex]
Here, n = 200, x = 70, and Z represents the 99% confidence interval's Z-score, which is 2.576.
To begin, we compute the sample proportion (p) as follows: p = x/n = 70/200 = 0.35
Next, we'll enter the following values into the formula:
CI = 0.35 ± 2.576 × [tex]\sqrt{(0.35(1-0.35)/200)}[/tex]
CI = 0.35 ± 2.576 × [tex]\sqrt{(0.2275/200)}[/tex]
CI = 0.35 ± 2.576 × 0.034
Calculate the margin of error now:
Error margin = 2.576 * 0.034
= 0.0876
Finally, build the confidence interval:
Lower boundary = 0.35 - 0.0876
= 0.2624
Maximum = 0.35 + 0.0876
= 0.4376
As a result, the population proportion's 99% confidence interval is around (0.2624, 0.4376).
To know more about confidence interval:
https://brainly.com/question/24131141
#SPJ4
Find both first partial derivatives. z = ln(x/y)
∂z/ ∂x =
∂z/∂y =
Given function is:z = ln(x/y)Now, we need to find the first partial derivatives of the function with respect to x and y.The first partial derivative with respect to x is given as:∂z/∂x = 1/x
The first partial derivative with respect to y is given as:∂z/∂y = -1/y\. Therefore, the values of ∂z/∂x and ∂z/∂y are ∂z/∂x = 1/x and ∂z/∂y = -1/y, respectively.
A fractional subordinate of an element of a few factors is its subsidiary regarding one of those factors, with the others held consistent. Vector calculus and differential geometry both make use of partial derivatives.
These derivatives are what give rise to partial differential equations and are useful for analyzing surfaces for maximum and minimum points. A tangent line's slope or rate of change can both be represented by a first partial derivative, as can be the case with ordinary derivatives.
Know more about partial derivatives:
https://brainly.com/question/28750217
#SPJ11
Jane has 450 pens and 180 pair of socks while Alicia has 250 pens and 110 pair of socks. If Jane was proportional to Alicia in number of pens to pair of socks, how many pens would we expect Jane to have? Round to the nearest whole number.
Based on the proportional relationship between the number of pens and pair of socks, we would expect Jane to have approximately 450 pens.
To determine the expected number of pens Jane would have based on the proportional relationship between the number of pens and pair of socks, we need to find the ratio of pens to socks for both Jane and Alicia and then apply that ratio to Jane's socks.
The ratio of pens to pair of socks for Jane is:
Pens to Socks ratio for Jane = 450 pens / 180 pair of socks = 2.5 pens per pair of socks.
Now, we can use this ratio to calculate the expected number of pens for Jane based on her socks:
Expected number of pens for Jane = (Number of socks for Jane) * (Pens to Socks ratio for Jane)
Expected number of pens for Jane = 180 pair of socks * 2.5 pens per pair of socks = 450 pens.
Therefore, based on the proportional relationship, we would expect Jane to have approximately 450 pens.
To know more about proportional relationship refer here:
https://brainly.com/question/20319245#
#SPJ11
use newton's method with x1 = -3 to find the third approximation x3 to the root of the equation 1/3x^3 1/2x^2 3 = 0
The third approximation x3 to the root of the equation 1/3x^3 1/2x^2 3 = ≈ -2.958333333
To find the third approximation, x3, to the root of the equation using Newton's method, we start with an initial guess x1 = -3 and apply the iterative formula:
x_(n+1) = x_n - f(x_n)/f'(x_n)
where f(x) is the given equation and f'(x) is its derivative.
Let's first calculate the derivative of the equation:
f(x) = 1/3x^3 - 1/2x^2 + 3
f'(x) = d/dx (1/3x^3 - 1/2x^2 + 3)
= x^2 - x
Using the initial guess x1 = -3, we can substitute it into the formula:
x2 = x1 - f(x1)/f'(x1)
Now, let's calculate the values:
f(-3) = 1/3(-3)^3 - 1/2(-3)^2 + 3 = -8 + 4.5 + 3 = -0.5
f'(-3) = (-3)^2 - (-3) = 9 + 3 = 12
Substituting these values into the formula, we have:
x2 = -3 - (-0.5)/12
= -3 + 0.04166666667
≈ -2.958333333
This gives us the second approximation, x2. To find the third approximation, we repeat the process using x2 as the new guess and continue until we reach x3.
to learn more about equation click here:
brainly.com/question/29174899
#SPJ11
If A is an 8 times 6 matrix, what is the largest possible rank of A? If A is a 6 times 8 matrix, what is the largest possible rank of A? Explain your answers. Select the correct choice below and fill in the answer box(es) to complete your choice. A. The rank of A is equal to the number of pivot positions in A. Since there are only 6 columns in an 8 times 6 matrix, and there are only 6 rows in a 6 times 8 matrix, there can be at most pivot positions for either matrix. Therefore, the largest possible rank of either matrix is B. The rank of A is equal to the number of non-pivot columns in A. Since there are more rows than columns in an 8 times 6 matrix, the rank of an 8 times 6 matrix must be equal to. Since there are 6 rows in a 6 times 8 matrix, there are a maximum of 6 pivot positions in A. Thus, there are 2 non-pivot columns. Therefore, the largest possible rank of a 6 times 8 matrix is C. The rank of A is equal to the number of columns of A. Since there are 6 columns in an 8 times 6 matrix, the largest possible rank of an 8 times 6 matrix is. Since there are 8 columns in a 6 times 8 matrix, the largest possible rank of a 6 times 8 matrix is.
The correct answer is B
The rank of A is equal to the number of non-pivot columns in A. Since there are more rows than columns in an 8 times 6 matrix, the rank of an 8 times 6 matrix must be equal to the number of pivot positions, which is 6. Since there are 6 rows in a 6 times 8 matrix, there are a maximum of 6 pivot positions in A. Thus, there are 2 non-pivot columns. Therefore, the largest possible rank of a 6 times 8 matrix is 2.
Learn more about rank of matrix here:
https://brainly.com/question/31397722
#SPJ11
Consider rolling two dice. Let A be the event that the first die is a four, and B be the event that the second die is a four. Draw and label a probability tree diagram to represent the rolling of the two dice. 1:11 11.10
To represent the rolling of two dice and the events A and B, a probability tree diagram can be used. The diagram will illustrate the possible outcomes and their associated probabilities.
The probability tree diagram for rolling two dice and events A and B can be constructed as follows:
```
1/6 1/6
------------ ------------
| A: 1/6 | A: 1/6 |
1 | | |
| | |
------------ ------------
5/6 5/6
------------ ------------
| A: 5/6 | A: 5/6 |
2 | | |
| | |
------------ ------------
B: 1/6 B: 1/6
```
In the diagram, the top level represents the possible outcomes of the first die roll, which can result in either a 1 or a 2 with equal probabilities of 1/6 each. From each outcome, two branches represent the possible outcomes of the second die roll. The left branch represents the event A, where the first die is a four, and the right branch represents the event B, where the second die is a four. Each branch is labeled with the corresponding probability.
This probability tree diagram visually represents the probabilities associated with the rolling of two dice and the events A and B, helping to illustrate the different outcomes and their likelihoods.
Learn more about probability here:
https://brainly.com/question/31828911
#SPJ11
Whether the following statement is true or false, and explain why For a regular Markov chain, the equilibrium vector V gives the long-range probability of being in each state Is the statement true or false? O A True OB. False. The equilibrium vector V gives the short-range probability of transitioning out of each state O C. False. The equilibrium vector V gives the short-range probability of being in each state OD. False The equilibrium vector V gives the long-range probability of transitioning out of each state.
The statement "For a regular Markov chain, the equilibrium vector V gives the long-range probability of being in each state" is true, because in a regular Markov chain, the equilibrium vector V represents the long-range probability of being in each state, capturing the stable behavior of the system over time.
In a regular Markov chain, the equilibrium vector V represents the long-range probability of being in each state. To understand why this is the case, let's delve into the concepts of Markov chains and equilibrium.
A Markov chain is a stochastic model that describes a sequence of events where the future state depends only on the current state and is independent of the past states. Each state in the Markov chain has a certain probability of transitioning to other states.
The equilibrium vector V is a vector of probabilities that represents the long-term behavior of the Markov chain. It is a stable state where the probabilities of transitioning between states have reached a balance and remain constant over time. This equilibrium state is achieved when the Markov chain has converged to a steady-state distribution.
To understand why the equilibrium vector V represents the long-range probability of being in each state, consider the following:
Transient and Absorbing States: In a Markov chain, states can be classified as either transient or absorbing. Transient states are those that can be left and revisited, while absorbing states are those where once reached, the system stays in that state permanently.
Convergence to Equilibrium: In a regular Markov chain, under certain conditions, the system will eventually reach the equilibrium state. This means that regardless of the initial state, after a sufficient number of transitions, the probabilities of being in each state stabilize and no longer change. The equilibrium vector V captures these stable probabilities.
Long-Range Behavior: Once the Markov chain reaches the equilibrium state, the probabilities in the equilibrium vector V represent the long-range behavior of the system. These probabilities indicate the likelihood of being in each state over an extended period. It gives us insights into the steady-state distribution of the Markov chain, showing the relative proportions of time spent in each state.
Therefore, the equilibrium vector V gives the long-range probability of being in each state in a regular Markov chain. It reflects the steady-state probabilities and the stable behavior of the system over time.
To learn more about Markov chain visit : https://brainly.com/question/30975299
#SPJ11