Answer:
Boiling point
Explanation:
Distillation is one of the most widely used separation technique in chemistry. It is used to separate a mixture of liquid substances with different boiling point. Hence, the basis of the separation is BOILING POINT DIFFERENCE.
In the procedure, the liquid substances are heated until they turn gaseous, which they do at different times considering their different boiling points. The separated components are then converted back to liquid states in a process called CONDENSATION.
The answer choices are
-solid
-liquid
-gas
Answer:
solid, gas
Explanation:
gasses are very low density because there is a low mass in a large volume with lots of space between atoms, solids on the other hand are very densely packed and there is very little room between atoms
A) accelerated upward. B) slowed and then stopped. C) moved at a constant velocity. D) increased its speed rapidly.
Answer:
A because the line is showing accelerated upward.
Explanation:
The substance in a ___________mixture can usually be seen and are easily separated
Answer:
Heterogeneous mixture
Explanation:
A heterogeneous mixture is a mixture of two or more chemical substances (elements or compounds), where the different components can be visually distinguished and easily separated by physical means. Examples include: mixtures of sand and water. mixtures of sand and iron filings.
Which statement refers to the quantum mechanical model? A) Electrons move in a circular path about the nucleus. B) Electrons can lose energy and fall into the nucleus. C) Electrons are in "orbitals", regions of space where there is high probability of being found. D) An electron can move from one circular path to another only when it absorbs or emits energy corresponding to the exact difference between the two energy states.
Answer:
Electrons are in "orbitals", regions of space where there is high probability of being found.
Explanation:
The Wave mechanical model of the atom does not restrict the electrons to certain energy levels only as in the Bohr's model, instead it describes a region around the nucleus called an orbital, where there is a high probability of finding an electron with a certain amount of energy.
Each energy level is composed of one or more orbitals and the distribution of electrons around the nucleus is determined by the number and kind of energy levels that are occupied.
15. An electrically neutral atom consists of 15 neutrons, 13 electrons, and a number of protons. What is its mass number?
Answer:
28
Explanation:
it states that the atom is neutral, meaning the number of electrons and protons are the same. so if there are 13 electrons, there are 13 protons. And the mass number is neutrons plus protons. So 13+15 is 28
Atoms of elements in the same group have the same number of . This is why they have similar chemical properties.
Answer:
Same number of electrons in their outer shell.
Explanation:
Whe working out their electronic configuration ( by looking at the atomic number) , one will find out that the number of electrons in their outer shell is also the same so the elements have to lose or gain the same amount of electrons to become stable.
Answer: its , valence electrons I just did it
To practice for an Ironman competition, John rode his bike for 15 kilometers. How many
meters did he ride?
Answer:
15000
Explanation:
1000 Meters in a kilo meter. So multiply 15 by a 1000.
What is the significance of being able to "grow" organs?
Answer:
The significance of being able to "grow" organs is the potential to create new organs to replace the old and worn out ones or any that are missing. This can potentially save lives.
Explanation:
What are the four categories commonly used to classify chemicals and chemical agents in the graphic communications industry
Answer:
Organic
Plate making
Ink mists
Gas, fumes and dust
Explanation:
the four categories commonly used to classify chemicals and chemical agents in the graphic communications industry are Organic ,Plate making ,Ink mists, Gas, fumes and dust.
Organic refer to those chemicals gotten from living matter and are natural.
Plate making refers to how plates are make and it carry image in the printing process.
Ink mist gotten from ink is use in graphic designs for painting and color indication.
How do we observe in experiments?
Answer:
by watching and writing down the information that is provided
Explanation:
matter that has a uniform and defined composition is called a
When the internal energy of a material increases,: a) its temperature will rise b) it will go through a phase change c) A and B d) A or B
Answer:
a or b
Explanation:
Answer:
D. A or B
Explanation: The temperature of a substance cannot increase during phase change, so both A and B cannot happen simultaneously. And internal energy is the sum of the microscopic potential and kinetic energies of a substance, which increase with temperature and phase transition.
PLEASE HELP !!! Read the passage below and use it to answer the question. Rainforests have four basic layers. The tallest trees are part of the emergent layer, which can be as much as 60 m above the ground. The sunlight is bright and hot here, and the wind can be strong. The main layer of the rainforest is the canopy, more than 20 m above the ground. It is made up of the leaves and branches of tree tops. The air here is still and very moist. The canopy blocks out most of the sunlight. Smaller trees, vines, and other plants make up the understory, which is less than 12 m above the ground. This layer is damp and warm with very little sunlight. The forest floor is dark, warm, and moist. Decomposers break up fallen leaves and other dead matter here. Which of the following graphs best presents one of the abiotic factors of a rainforest?
Answer:
Read the back of glossary
Explanation:
Read pages
Answer:
hi A
Explanation:
i need the points please
Find the molar mass of (NH4)2Cr2O7.
Answer: The molar mass of ammonium dichromate is 252.06 g/mol
Hope this helped :)
Calculate 1.23 m x 0.89 m and give your answer with the correct number of significant figures?
Answer:
1.1m that what I got and it said it was right
The calculation of the given figure to one significant figure is[tex]1.1 m^{2}[/tex]
Significant figures can be regarded as a number of digits that is present in a particular value.Given 1.23 mAnd 0.89 m
If we multiply we have[tex]( 1.23*0.89) = 1.0947[/tex]
Since, there is no definite significant figure given, I will assume one significant figure.To do this we start to count significant figures starting from first non-zero digit to the actual figure we are requested to stop.We can see that 9 is after zero, the we round off that 9 then it will become 1 , Then the value to one significant figure is [tex]1.1m^{2}[/tex]Therefore, the multiplication of the values to one significant figure is [tex]1.1^{2}[/tex]
Learn more at:https://brainly.com/question/13386983?referrer=searchResults
What is the benefit to having baby steps in science occur as small bits of evidence accumulate?
If someone could help me I would really appreciate it! Thank you
Answer:
aby steps in science occur as small bits of evidence gradually accumulate. The accumulating evidence lets scientists refine and expand on earlier ideas
Explanation:
The benefit to having baby steps in science occurs as small bits of evidence accumulate is which lets scientists refine and expand on earlier ideas. The correct option is a.
What is science?Science is the subject of learning facts and ideas about the earth and other natural things present on the earth. It constitutes the phenomena and the acts behind the happening of things. They search and contribute to the reason behind something natural.
Science works based on evidence and proof. It describes the theories and facts behind natural things. So taking baby steps in science is essential to make it clear that no facts are left behind. Science always changes because of the changing of things.
Thus, the correct option is a. let scientists refine and expand on earlier ideas.
To learn more about evidence accumulation, refer to the link:
https://brainly.com/question/14917384
#SPJ2
A 42.0g sample of compound containing only C and H was analyzed. The results showed that the sample contained 36.0g of C and 6.0g of H.
Which of the following questions about the compound can be answered using the results of the analysis? (choose 1 option)
A) What was the volume of the sample?
B) What is the molar mass of the compound?
C) What is the chemical stability of the compound?
D) What is the empirical formula of the compound?
Answer:
D) what is the empirical.formular of the compond
Explanation:
this is because we have two elements and to calculate the empiral formula we need to have their masses which is also given
In an exothermic reaction is energy transferred to or from the surroundings?
Answer:
transfer energy to the surroundings
Explanation:
Exo means exit
Audrey drove 50 miles in 2 hours. What was her average speed? 25 miles per hour 20 miles per hour 50 miles per hour 100 miles per hour
Answer:
25 miles per hour is the answer.
Explanation:
It is right because I just finished the test and got 100%
What role does DNA play in living organisms?
Answer: a nucleic acid that contains the genetic instructions for the development and function of living things
Explanation:
Which subatomic particle causes the name of the element to change?
Answer:
Proton
Explanation:
Changing the number of protons in an atom changes the type of atom.
2. Is it true thatOnly the stratosphere contains enough air for living things to breathe?
Answer:
I'm pretty sure that's false.
Explanation:
The conversion factor 100mL/1 L would be used to change what
Answer:
Liters to milliliters.
Explanation:
Conversion factors are used to convert from one unit to another. The unit you are converting from goes in the denominator, and the unit you are converting to goes in the numerator. Since liters is in the denominator, you are converting from liters to another unit. Since milliliters is in the numerator, you are converting to that unit. Therefore, you would be converting from liters to milliliters.
Which of the following statements is true? A)If a hypothesis is proven false, a mistake has been made in the experiment.B) The independent variable is what changes as a result of the dependent variable. C) Changes in the independent variable cause changes in the dependent variable. D) Once a hypothesis is proven true, it becomes a theory and cannot be disproved. ANSWER ASAP
Answer:
D
Explanation:
once a hypothesis is proven true, it becomes a theory and cannot be disproved.
Im so glad i got help with this one because i got a hundred bc of someone.
Maryann and josh left a cup of ocean water in the sun. When they returned a day later only salt was left in the cup. Which best explains what happens to the ocean water in the cu
Answer:
The water was evaporated from the sun only leaving salt in the cup
Explanation:
the sun done its cycle and the salt was left
Maryann and josh left a cup of ocean water in the sun. When they returned a day later only salt was left in the cup because of the evaporation.
What is evaporation?
The evaporation is a process by which an element in liquid sate gets transfer into from its liquid state to gas below the temperature at which the liquid gets boiled liquid water enters the atmosphere as water gets vaporized.
In the following the salt was in liquid state so converts into solid and liquid turns into gaseous state and salt is remained into the cup.
Therefore, Maryann and josh left a cup of ocean water in the sun. When they returned a day later only salt was left in the cup because of the evaporation.
Learn more about evaporation, here:
https://brainly.com/question/320765
#SPJ2
An electron is approximately 0.05% of the mass of a proton. Protons and neutrons each have a mass of 1 amu. Which of the following best describes the relationship between mass and subatomic particles?
A. The mass of an electron is equal to that of a neutron
B. Atomic mass is the total number of protons and electrons
C. A neutron has 0.05% more mass than an electron
D. The nucleus comprises over 99% of the atom's mass
Answer:
D. The nucleus comprises over 99% of the atom's mass.
Explanation:
Which of the following best describes the relationship between mass and subatomic particles?
A. The mass of an electron is equal to that of a neutron. FALSE. The mass of an electron is ≈1/1,840 of that of a neutron.
B. Atomic mass is the total number of protons and electrons. FALSE. Atomic mass is the total number of protons and neutrons.
C. A neutron has 0.05% more mass than an electron. FALSE. A neutron has 0.05% more mass than a proton.
D. The nucleus comprises over 99% of the atom's mass. TRUE. The nucleus comprises protons and neutrons.
2. How have fossils been preserved over millions of years?
Answer:A fossil is the remains or traces of a once-living plant or animal that was preserved in rock or other material before the beginning of recorded history. ... Fossils of single-celled organisms have been recovered from rocks as old as 3.5 billion years. Animal fossils first appear in rocks dating back about 1 billion years.
Explanation:
Five
Five types of fossils: (a) insect preserved in amber, (b) petrified wood (permineralization), (c) cast and mold of a clam shell, (d) pyritized ammonite, and (e) compression fossil of a fern.
Complete the following calculation. Round off the answers to the correct
number of significant figures.
2.30 m x 3.65 m x 0.55 m
Plz help thank you!
Answer:
uhh can ya specify plezz
Explanation:
Calculate the following to the correct number of significant figures 0.0041 cm x 2.00 cm
x 501 cm
Answer:
4.1 cm³
Explanation:
When multiplying, the product must have the same number of significant figures as the factor with the least number of significant figures. 0.0041 has two significant figures, 2.00 has three significant figures, and 501 has three significant figures. The answer will have 2 significant figures.
0.0041 cm × 2.00 cm × 501 cm
= 4.1082 cm³
≈ 4.1 cm³
A solid block of substance is 74.0cm x 55.0cm x 35.0cm and has a mass of 5.69 x 105g. (569000)
Assuming that it did not chemically react with water or dissolve in it, would it float in water?
Answer:
No, it would sink in water.
Explanation:
Firstly, note that whether an object will float or sink in water is dependent on the density of the object and the water. To calculate density of the object, volume and mass is required.
According to the question, a solid block of substance is 74.0cm x 55.0cm x 35.0cm i.e. the Length (L), width (W) and height (H) are 74cm, 55cm, and 35cm respectively.
Volume = L × W × H
Volume = 74 × 55 × 35
Volume = 142,450 cm^3
Mass of the solid object = 5.69 x 105g. i.e. 569000g
Density = mass / volume
Density = 569000/142450
Density = 3.99438
The density of the solid object is 3.99g/cm^3
Consider the fact that the Density of water is 1g/cm^3. An object will FLOAT in water if the density is lower than that of water while it will SINK if the density is higher than that of water.
Since the density of the solid object is 3.99g/cm^3, which is higher than that of water (1.0 g/cm^3), the solid object will SINK in water.