The surface area of the cylinder is approximately 116.16 [tex]cm^2[/tex].
To form the lateral surface area of a right circular cylinder, the square piece of paper must be rolled so that the length of the paper becomes the height of the cylinder and the width of the paper becomes the circumference of the base.
The circumference of the base can be found using the formula C = 2πr, where r is the radius of the base. Since the width of the paper is 10 cm, we can set up an equation:
10 cm = 2πr
Solving for r, we get:
r = 5/π cm
The height of the cylinder is equal to the length of the paper, which is also 10 cm.
The lateral surface area of a cylinder can be found using the formula LSA = 2πrh, where r is the radius and h is the height. Plugging in our values, we get:
LSA = 2π(5/π)(10) = 100 [tex]cm^2[/tex]
To find the total surface area of the cylinder, we need to add in the areas of the top and bottom circles. The area of a circle can be found using the formula A = π[tex]r^2[/tex]. Plugging in our value for r, we get:
A = π(5/π)^2 = 25/π [tex]cm^2[/tex]
Adding in both top and bottom circles, we get a total area of:
LSA + 2A = 100 + 50/π ≈ 116.16[tex]cm^2[/tex]
To know more about surface area of the cylinder refer here:
https://brainly.com/question/28575608#
#SPJ11
If the figure shown on the grid below is dilated by a scale factor of 2/3 with the center of dilation at (-4,4), what is the coordinate of point M after the dilation?
After dilation with the given scale factor, the coordinate of M is (-4/3, 2/3)
What is the dilation of a figure?Dilation of a figure is a transformation that changes the size of the figure while preserving its shape. In a dilation, the figure is either enlarged or reduced by a scale factor, which is a constant ratio. The scale factor determines how much the figure is stretched or compressed.
During a dilation, each point of the original figure is multiplied by the scale factor to determine the corresponding position of the dilated figure. The center of dilation is a fixed point around which the figure is expanded or contracted.
In he figure given, the point M have coordinate at (-2, 1)
After dilation with a scale factor of 2/3, the coordinate of M changes to;
M(-2, 1) = 2/3(-2, 1) = -4/3, 2/3
Learn more on dilation of a figure here;
https://brainly.com/question/3457976
#SPJ1
For each pair of functions below, find the Wronskian and determine if they are linearly independent. = = €2x+3 (1) (2) (3) 41 = €20, y2 = yı = x2 +1, y2 = x y1 = ln x, y2 = 0 = =
The first and second pairs of functions are linearly independent, while the third pair of functions are linearly dependent Since the Wronskian is zero, it indicates that the functions are linearly dependent.
The Wronskian is a term used in mathematics to determine whether two functions are linearly independent. The Wronskian is a determinant of functions that is used to determine whether or not they are linearly independent.
The Wronskian of a set of functions f1, f2, ..., fn is denoted as W(f1, f2, ..., fn).
The Wronskian of the functions can be found using the following formula:
W(f1, f2) = f1(x) * f2'(x) - f1'(x) * f2(x).
Therefore, we have:
1. f1(x) = 2x + 3 and f2(x) = 4f1(x) - 1 = 2x + 3 and f2(x) = 8x + 11
Then, we find the Wronskian of f1 and f2 as shown below:
W(f1, f2) = f1(x) * f2'(x) - f1'(x) * f2(x) = (2x + 3) * (8) - (2) * (8x + 11)
= 16x + 24 - 16x - 22 = 2
Since the Wronskian is not zero, it indicates that the functions are linearly independent.
2. y1 = x^2 + 1 and y2 = x*y1= x^2 + 1 and y2 = x(x^2 + 1)= x^3 + x. We find the Wronskian of y1 and y2 as shown below:
W(y1, y2) = y1(x) * y2'(x) - y1'(x) * y2(x) = (x^2 + 1) * (3x^2 + 1) - (2x) * (x^3 + x)
= 3x^4 + 4x^2 + 1 - 2x^4 - 2x^2 = x^4 + 2x^2 + 1
Since the Wronskian is not zero, it indicates that the functions are linearly independent.
3. y1 = ln(x) and y2 = 0 = ln(x) and y2 = 0
We find the Wronskian of y1 and y2 as shown below:
W(y1, y2) = y1(x) * y2'(x) - y1'(x) * y2(x) = (ln(x)) * (0) - (1/x) * (0) = 0
Since the Wronskian is zero, it indicates that the functions are linearly dependent.
Therefore, the first and second pairs of functions are linearly independent, while the third pair of functions are linearly dependent.
To know more about linearly independent functions, visit the link : https://brainly.com/question/15855339
#SPJ11
Consider the function f(x) = Log(7). (a) Describe the image of the unit circle under f. (b) Describe the image of the positive imaginary axis under f. (c) Describe the image of the positive real axis under f.
a) The image of the unit circle under f is a spiral that starts at the point (0,0) and moves infinitely upwards around the vertical line x = log(7).
b) The image of the positive imaginary axis under f is an infinite line that passes through the point (0, log(7)) and moves upwards towards infinity.
c) The image of the positive real axis under f is the vertical line x = log(7).The given function is f(x) = log(7)
.a) The image of the unit circle under f is a spiral that starts at the point (0,0) and moves infinitely upwards around the vertical line x = log(7). This spiral gets closer and closer to the vertical line x = log(7) as it spirals upward. The points on the unit circle that are closest to the vertical line x = log(7) are those that are closest to the point (1,0). b) The image of the positive imaginary axis under f is an infinite line that passes through the point (0, log(7)) and moves upwards towards infinity. This is because the function f(x) = log(7) only takes positive values, so the image of the positive imaginary axis under f is a vertical line.c) The image of the positive real axis under f is the vertical line x = log(7). This is because the positive real axis is defined by the points where y = 0, and the function f(x) = log(7) is equal to 0 when x = log(7).
Know more about circle here:
https://brainly.com/question/15424530
#SPJ11
A charity holds a raffle in which each ticket is sold for $35. A total of 9000 tickets are sold. They raffle one grand prize which is a Lexus GS valued at $45000 along with 2 second prizes of Honda motorcycles valued at $9000 each. What are the expected winnings for a single ticket buyer? Express to at least three decimal place accuracy in dollar form (as opposed to cents).
Answer: $
A purchaser of a single ticket can anticipate losing, on average, $28.
The likelihood of winning each prize multiplied by the prize's worth, then adding up all the prizes, can be used to determine the estimated earnings for a single-ticket purchaser.
The big prize has a 1/9000 chance of being won, and it is worth $45000. Hence, the following are the anticipated profits from the main prize:
45000/9000 = 5
The odds of winning one of the three second-place prizes, each worth $9000, are 2/9000. The following is the anticipated profits from the second prize:
2/9000 * 9000 = 2
Finally, the price of the ticket itself is the projected cost of the ticket:
$35
Consequently, the difference between the expected value of the prizes and the ticket's price can be used to compute the expected wins for a single ticket purchaser:
$5 + $2- $35 = -$28
This indicates that a purchaser of a single ticket can anticipate losing, on average, $28.
To know more about probability follow
brainly.com/question/24756209
#SPJ1
A scientist claims that the mean gestation period for a fox is 50.3 weeks. If a hypothesis test is performed that rejects the null hypothesis, how would this decision be interpreted? Homework Help 6VA, Overview of hypothesis testing, hypotheses, conclusions implications for claim (4:32) 6DC Connecting reject/fail to reject decision and implication for claim (DOCX) There is not enough evidence to support the scientist's claim that the gestation period is 50.3 weeks There is not enough evidence to support the scientist's claim that the gestation period is more than 50.3 weeks There is enough evidence to support the scientist's claim that the gestation period is 50.3 weeks The evidence indicates that the gestation period is less than 50.3 weeks
If a hypothesis test is performed that rejects the null hypothesis, the decision would be interpreted as there being enough evidence to support the alternative hypothesis.
In this case, it would mean that there is enough evidence to support the claim that the gestation period for a fox is different from 50.3 weeks, but it does not specify whether it is longer or shorter. In hypothesis testing, the null hypothesis (H0) represents the default position or the claim to be tested, while the alternative hypothesis (Ha) represents the opposing claim. In this case, the null hypothesis would be that the mean gestation period for a fox is 50.3 weeks. If the hypothesis test rejects the null hypothesis, it means that there is enough evidence to suggest that the true mean gestation period is different from 50.3 weeks. However, the test does not provide information on whether the gestation period is longer or shorter than 50.3 weeks. The alternative hypothesis does not specify a direction, so the interpretation would be that there is enough evidence to support the claim that the gestation period is different from the claimed value of 50.3 weeks.
To know more about hypothesis testing here: brainly.com/question/30701169
#SPJ11
Consider the Sturm-Liouville Problem = -g" = Ag, 0 < x < 1, y(0) + y(0) = 0, y(1) = 0. = - Is I = 0) an eigenvalue? Are there any negative eigenvalues? Show that there are infinitely many positive eigenvalues by finding an equation whose roots are those eigenvalues, and show graphically that there are infinitely many roots.
Show that there are infinitely many positive eigenvalues by finding an equation whose roots are those eigenvalues, and show graphically that there are infinitely many roots.
Solution: I = 0 is not an eigenvalue. The general form of the eigenvalue problem is L(y) = λw(x)y = 0, where L(y) is a Sturm-Liouville operator, w(x) is a weight function and λ is an eigenvalue. The eigenvalue problem is a Sturm-Liouville problem and is self-adjoint. Eigenvalues are real and eigenfunctions corresponding to different eigenvalues are orthogonal with respect to the weight function. There are no negative eigenvalues since we have a fixed boundary condition at x = 0. So, the smallest eigenvalue is zero. For finding the eigenvalues, we have to solve the differential equation and boundary conditions, g″ + Ag = 0, y(0) + y′(0) = 0, y(1) = 0.
The general solution to the differential equation is:
y = c1 cos(αx) + c2 sin(αx),
where α = √A.
The boundary condition at x = 0 is: y(0) + y′(0) = c1 + αc2 = 0.
The boundary condition at x = 1 is: y(1) = c1 cos(α) + c2 sin(α) = 0.
We get the eigenvalues as follows: c1 = -αc2, c2 = c2, tan(α) = α. ⇒αtan(α) = 0.Tan function is negative in the second and fourth quadrants and positive in the first and third quadrants, so there are infinitely many positive roots of α.For finding the roots graphically, we draw the curves y = tan(α) and y = α. The roots of the equation tan(α) = α correspond to the intersection points of these two curves. The figure below shows that there are infinitely many eigenvalues.
To know more about Sturm-Liouville operator refer to:
https://brainly.com/question/29841652
#SPJ11
A coin will be tossed three times, and each toss will be recorded as heads (
H
) or tails (
T
).
Give the sample space describing all possible outcomes.
Then give all of the outcomes for the event that the first toss is tails.
Use the format
HTH
to mean that the first toss is heads, the second is tails, and the third is heads.
If there is more than one element in the set, separate them with commas
The sample space describing all possible outcomes of tossing a coin three times is {HHH, HHT, HTH, HTT, THH, THT, TTH, TTT}, and the outcomes for the event that the first toss is tails are {THH, THT, TTH, TTT}.
The sample space describing all possible outcomes of tossing a coin three times can be represented as follows: {HHH, HHT, HTH, HTT, THH, THT, TTH, TTT}Now, let's list all the outcomes for the event that the first toss is tails {THH, THT, TTH, TTT}These outcomes indicate that the first toss is tails, and the second and third tosses can be either heads or tails.In conclusion, the sample space for tossing a coin three times is {HHH, HHT, HTH, HTT, THH, THT, TTH, TTT}, and when the first toss is tails, the possible outcomes are {THH, THT, TTH, TTT}.
For more such questions on possible outcomes:
https://brainly.com/question/29120442
#SPJ8
use the quadratic formula to find the exact solutions of x2 − 5x − 2 = 0.
Using the quadratic formula, the exact solutions of the equation x^2 - 5x - 2 = 0 are:
x = (-b ± √(b^2 - 4ac)) / (2a)
To find the solutions of a quadratic equation in the form ax^2 + bx + c = 0, we can use the quadratic formula. In this case, the equation is x^2 - 5x - 2 = 0, where a = 1, b = -5, and c = -2.
Applying the quadratic formula, we have:
x = (-(-5) ± √((-5)^2 - 4(1)(-2))) / (2(1))
= (5 ± √(25 + 8)) / 2
= (5 ± √33) / 2
Therefore, the exact solutions of the equation x^2 - 5x - 2 = 0 are (5 + √33) / 2 and (5 - √33) / 2.
To learn more about quadratic formula
brainly.com/question/22364785
#SPJ11
Pool A starts with 380 gallons of water. It has a leak and is losing water at a rate of 9 gallons of water per minute. At the same time, Pool B starts with 420 gallons of water and also has a leak. It is losing water at a rate of 13 gallons per minute. The variable t represents the time in minutes. After how many minutes will the two pools have the same amount of water? How much water will be in the pools at that time? ➡>
Answer:10 minutes
Step-by-step explanation:The amount of water in Pool A after t minutes can be represented by the function A(t) = 380 - 9t, where 9t is the amount of water lost due to the leak. The amount of water in Pool B after t minutes can be represented by the function B(t) = 420 - 13t, where 13t is the amount of water lost due to the leak.
To find when the two pools have the same amount of water, we need to solve the equation A(t) = B(t):
380 - 9t = 420 - 13t
4t = 40
t = 10
Therefore, the two pools will have the same amount of water after 10 minutes. To find how much water will be in the pools at that time, we can substitute t = 10 into either A(t) or B(t):
A(10) = 380 - 9(10) = 290
B(10) = 420 - 13(10) = 290
Therefore, both pools will have 290 gallons of water after 10 minutes.
8. (5 pts) what is (0.00034) x 48579? make sure the reported answers is rounded properly. a) 16.5 b) 17 c) 16.517 d) 16.52
The product of (0.00034) and 48579 is approximately 16.517 (rounded to three decimal places). Therefore, the correct answer is option c) 16.517.
In the first part, the calculation is performed by multiplying the given numbers: (0.00034) x 48579 = 16.51586.
In the second part, the answer is rounded properly to three decimal places, resulting in 16.517. This ensures that the reported answer matches the requested level of precision.
To learn more about rounded
brainly.com/question/29878750
#SPJ11
Let W = {a + bx + x2 € Pz: a, b e R} with the standard operations in P2. Which of the following statements is true? W is not a subspace of P2 because 0 € W. O The above is true O None of the mentioned W is a subspace of P2. The above is true
The statement "W is not a subspace of P2 because 0 ∈ W" is false.
For a subset to be a subspace of a vector space, it needs to satisfy three conditions:
It contains the zero vector.
It is closed under addition.
It is closed under scalar multiplication.
In this case, we have:
W = {[tex]a + bx + x^2[/tex] ∈ P2 : a, b ∈ R}
The zero vector in P2 is the polynomial [tex]0x^2 + 0x + 0[/tex]. We can see that this polynomial is in W, since we can set a = b = 0. Therefore, W contains the zero vector.
W is closed under addition, since if [tex]p(x) = a1 + b1x + x^2[/tex] and q(x) =[tex]a2 + b2x + x^2[/tex]are in W, then:
[tex]p(x) + q(x) = (a1 + a2) + (b1 + b2)x + 2x^2[/tex]
is also in W, since a1 + a2 and b1 + b2 are real numbers.
W is also closed under scalar multiplication, since if p(x) = [tex]a + bx + x^2[/tex]is in W and c is a real number, then:
[tex]c p(x) = c(a + bx + x^2) = ca + (cb)x + c(x^2)[/tex]
is also in W, since ca and cb are real numbers.
Therefore, W satisfies all three conditions to be a subspace of P2. So the statement "None of the mentioned W is a subspace of P2" is false.
Learn more about subspace : https://brainly.com/question/32622596
#SPJ11
A study of all the students at a small college showed a mean age of 20.4 and a standard deviation of 2.7 years a. Are these numbers statistics or parameters? Explain. b. Label both numbers with their appropriate symbol (such as x, , s, or s). a. Choose the correct answer below. O A. The numbers are statistics because they are estimates and not certain. O B. The numbers are parameters because they are estimates and not certain. O C. The numbers are parameters because they are for all the students, not a sample. O D. The numbers are statistics because they are for all the students, not a sample.
A study of all the students at a small college showed a mean age of 20.4 and a standard deviation of 2.7 years.
(a) These numbers are statistics because they are based on a sample of students from a small college. They are not certain, but estimates.
(b) The mean age is labeled with the symbol x and the standard deviation with the symbol s. The sample size is not given, so we cannot use the symbol n to represent it.
To know more about standard deviation click here
https://brainly.com/question/13336998
#SPJ11
if µ = 30, sample mean = 28.0, s = 6.1 and n = 13, the value of tobt is _________
If µ = 30, σ = 5.2, X = 28.0, s = 6.1 and N = 13, the value of most powerful statistic to test significance of "sample-mean" is -1.39.
We calculate the value of most powerful statistic to test the significance of the sample-mean using the given values by the formula for the t-statistic:
t = (X - µ)/(σ/√N),
We know that : µ = 30, σ = 5.2, X = 28.0, s = 6.1, and N = 13;
Substituting these values,
We get,
t = (28 - 30)/(5.2/√13),
Simplifying this expression,
We get,
t = -1.3867 ≈ -1.39.
Therefore, the value of most powerful statistic is -1.39.
Learn more about Statistic here
https://brainly.com/question/29716261
#SPJ4
The given question is incomplete, the complete question is
If µ = 30, σ = 5.2, X = 28.0, s = 6.1 and N = 13, the value of the most powerful statistic to test the significance of the sample mean is _________.
Match each graph of a polynomial function with the corresponding equation 1) g(x) = 0.5x* 3x² + 5x il) b(x) = x². 7x + 2x 3 - III) p(x) = -x² + 5x² + 4
The graph of a polynomial function can be matched with its corresponding equation based on the characteristics of the graph. The matches are as follows: Graph II matches the equation g(x) = 0.5x³ + 5x.II) Graph I matches the equation b(x) = x² + 7x + 2. III) Graph III matches the equation p(x) = -x² + 5x² + 4.
To match each graph with the corresponding equation, we can analyze the characteristics of the graphs and compare them to the given equations.
Graph II is a cubic function with a positive leading coefficient. It starts in the negative y-axis and increases as x approaches positive infinity. The equation that matches these characteristics is g(x) = 0.5x³ + 5x.
Graph I is a quadratic function with a positive leading coefficient. It opens upwards and has a vertex at a minimum point. The equation that matches these characteristics is b(x) = x² + 7x + 2.
Graph III is also a quadratic function, but with a negative leading coefficient. It opens downwards and has a vertex at a maximum point. The equation that matches these characteristics is p(x) = -x² + 5x² + 4.
By analyzing the properties and shape of each graph, we can match them with their corresponding polynomial equations.
Learn more about quadratic function here:
https://brainly.com/question/18958913
#SPJ11
Consider the following system of differential equations da V = 0, dt dy + 3x + 4y = 0. dt a) Write the system in matrix form and find the eigenvalues and eigenvectors, to obtain a solution in the form ( )= a()+ (1) M C₂ where C₁ and C₂ are constants. Give the values of X1, 31, A2 and 32. Enter your values such that A₁ A2- A₁ 9/1 3/2 Input all numbers as integers or fractions, not as decimals. Find the particular solution, expressed as a (t) and y(t), which satisfies the initial conditions (0) = 3, y(0) = -7. y(t)
The answer, y(t) is given by y(t) = - 19/4 + 19/4 e-3t.
Given system of differential equations, da V = 0, dt dy + 3x + 4y = 0.dtTo write the system in matrix form, we have Let X = [x y]T then dX/dt = [dx/dt dy/dt] and equation (1) becomes dX/dt = [0; -3x-4y]Solving for eigenvalues of matrix A, we have A = [-3 4; 0 0]Characteristic polynomial of A: |λI - A| = (-λ)(-3-λ) = λ(λ+3)So, eigenvalues of A are λ1 = 0, λ2 = -3Solving for eigenvector corresponding to λ1 = 0, we have(A - λ1 I)X = 0=> A X = 0 => [-3 4; 0 0][x; y] = [0; 0]=> -3x+4y = 0=> y = (3/4) x Therefore, eigenvector corresponding to λ1 = 0 is [1; 3/4] Solving for eigenvector corresponding to λ2 = -3, we have(A - λ2 I)X = 0=> [-3+3 -4; 0 -3][x; y] = [0; 0]=> -x - 4y = 0=> y = (-1/4) x Therefore, eigenvector corresponding to λ2 = -3 is [1; -1/4] Now, putting the values of eigenvalues and eigenvectors in the given solution formula: X(t) = A1 e0t [1; 3/4] + A2 e-3t [1; -1/4]Then, X(t) = A1 [1; 3/4] + A2 e-3t [1; -1/4]Also, X(t) = [x(t); y(t)]Thus, x(t) = A1 + A2 e-3t and y(t) = (3/4) A1 - (1/4) A2 e-3tTherefore, particular solution satisfying initial conditions (0) = 3 and y(0) = -7 is x(t) = 10 - 10 e-3ty(t) = - 19/4 + 19/4 e-3t
Know more about eigenvalues here:
https://brainly.com/question/29861415
#SPJ11
joan, emmanuel, andrew & angela sit in this order in a row left to right. janet changes places with eric, and then eric changes places with marcus. who is to the left of eric?
In the final arrangement, Angela is to the left of Eric.
Given the initial arrangement of Joan, Emmanuel, Andrew, and Angela from left to right, we need to determine who is to the left of Eric after the swaps.
First, Janet changes places with Eric. So the new arrangement becomes:
Joan, Emmanuel, Andrew, Janet, Angela.
Next, Eric changes places with Marcus. Considering the updated arrangement:
Joan, Emmanuel, Andrew, Janet, Marcus, Angela.
Now, we need to identify who is to the left of Eric. Looking at the arrangement, we see that Marcus is to the left of Eric. Therefore, Marcus is the answer.
LEARN MORE ABOUT arrangement here: brainly.com/question/30435320
#SPJ11
Evaluate 5|x³ - 21 + 7 when x = -2
The value of any number a, including 0, is given by |a|, where |-a| = |a|.
To evaluate 5|x³ - 21 + 7| when x = -2, substitute -2 in the expression to get:5|-2³ - 21 + 7| = 5|(-8) - 21 + 7| = 5|-22| = 5(22) = 110Thus, the value of 5|x³ - 21 + 7| when x = -2 is 110.
The absolute value bars around the expression |x³ - 21 + 7| ensure that the result is positive and the whole expression is then multiplied by 5.What is Absolute Value?
Absolute value is a measure of the distance between a number and zero on a number line. The value of a quantity without regard to its sign is known as the absolute value.
If the value inside the absolute value brackets is positive, the result of the absolute value equation is the same as the value inside the brackets.If the value inside the absolute value brackets is negative,
the result of the absolute value equation is the opposite (negation) of the value inside the brackets.
To learn more about : value
https://brainly.com/question/843074
#SPJ8
The following table shows site type and type of pottery for a random sample of 628 sherds at an archaeological location.
Pottery Type
Site Type Mesa Verde
Black-on-White McElmo
Black-on-White Mancos
Black-on-White Row Total
Mesa Top 79 65 45 189
Cliff-Talus 76 67 70 213
Canyon Bench 92 63 71 226
Column Total 247 195 186 628
Use a chi-square test to determine if site type and pottery type are independent at the 0.01 level of significance.
(a) What is the level of significance?
State the null and alternate hypotheses.
H0: Site type and pottery are independent.
H1: Site type and pottery are independent.H0:
Site type and pottery are not independent.
H1: Site type and pottery are independent.
H0: Site type and pottery are not independent.
H1: Site type and pottery are not independent.H0:
Site type and pottery are independent.
H1: Site type and pottery are not independent.
(b) Find the value of the chi-square statistic for the sample. (Round the expected frequencies to at least three decimal places. Round the test statistic to three decimal places.)
Are all the expected frequencies greater than 5?
YesNo
What sampling distribution will you use?
Student's tnormal uniformchi-squarebinomial
What are the degrees of freedom?
(c) Find or estimate the P-value of the sample test statistic. (Round your answer to three decimal places.)
(d) Based on your answers in parts (a) to (c), will you reject or fail to reject the null hypothesis of independence?
Since the P-value > α, we fail to reject the null hypothesis.
Since the P-value > α, we reject the null hypothesis.
Since the P-value ≤ α, we reject the null hypothesis.
Since the P-value ≤ α, we fail to reject the null hypothesis.
(e) Interpret your conclusion in the context of the application.
At the 1% level of significance, there is sufficient evidence to conclude that site and pottery type are not independent.
At the 1% level of significance, there is insufficient evidence to conclude that site and pottery type are not independent.
The solution to all parts is shown below:
(a) The level of significance is 0.01.
(b) Chi-square ≈ 3.916
(c) The P-value is approximately 0.416.
(a) The level of significance is 0.01.
(b) To find the value of the chi-square statistic for the sample, we need to calculate the expected frequencies and then perform the chi-square test. The expected frequencies can be calculated using the formula:
Expected frequency = (row total x column total) / grand total
The table below shows the expected frequencies:
Pottery Type
Site Type Mesa Verde
Black-on-White McElmo
Black-on-White Mancos
Black-on-White Row Total
Mesa Top (189 x247)/628 (189 x 195)/628 (189 x 186)/628
≈ 74.67 ≈ 58.72 ≈ 56.61 189
Cliff-Talus (213x247)/628 (213x195)/628 (213x186)/628
≈ 83.74 ≈ 66.48 ≈ 63.78 213
Canyon Bench (226x247)/628 (226x195)/628 (226x186)/628
≈ 89.02 ≈ 71.05 ≈ 67.93 226
Column Total 247 195 186 628
Now, we can calculate the chi-square statistic:
Chi-square = Σ [(Observed frequency - Expected frequency)² / Expected frequency]
Chi-square = [(79 - 74.67)² / 74.67] + [(65 - 58.72)² / 58.72] + [(45 - 56.61)² / 56.61] + [(76 - 83.74)² / 83.74] + [(67 - 66.48)² / 66.48] + [(70 - 63.78)² / 63.78] + [(92 - 89.02)² / 89.02] + [(63 - 71.05)² / 71.05] + [(71 - 67.93)² / 67.93]
Chi-square ≈ 3.916
(c) To find or estimate the P-value of the sample test statistic, we need to compare the chi-square statistic to the chi-square distribution.
so, degrees of freedom= (number of rows - 1) x (number of columns - 1)
= (3-1) x (3-1)
= 4.
So, the P-value is approximately 0.416.
(d) Based on the answers in parts (a) to (c), we will fail to reject the null hypothesis. Since the P-value (0.416) is greater than the level of significance (0.01), we do not have sufficient evidence to reject the null hypothesis that site type and pottery type are independent.
(e) In the context of the application, at the 1% level of significance, we do not have enough evidence to conclude that site and pottery type are not independent.
Learn more about Chi Square Test here:
https://brainly.com/question/30760432
#SPJ1
A researcher is interested in the effect of vaccination (vaccinated vs not vaccinated) and health status (healthy vs with pre-existing condition) on rates of flu. She samples 20 healthy people and 20 people with pre-existing conditions. 10 of the healthy people and 10 of the people with pre-existing conditions are given a flu shot. The other 10 healthy people and people with pre-existing conditions are not given flu shots. All of the subjects are monitored for a year to see if they contract the flu.
What is/are the independent variable(s)?
vaccination status
health status
both vaccination status and health status
rates of flu
the 20 healthy people and 20 people with preexisting conditions
The independent variables in the given study are vaccination status and health status.
The independent variables are the factors that are manipulated or controlled by the researcher in an experiment. In this case, the researcher is interested in studying the effect of vaccination and health status on rates of flu. Therefore, the two factors being investigated, vaccination status (vaccinated vs not vaccinated) and health status (healthy vs with pre-existing condition), are the independent variables.
The researcher samples 20 healthy people and 20 people with pre-existing conditions, and within each group, 10 individuals are given a flu shot while the other 10 are not. By manipulating these independent variables, the researcher can observe and analyze their effects on the rates of flu in the study population.
To know more about independent variables , refer here: https://brainly.com/question/17034410#
#SPJ11
The tabular Cusuu method is used to monloc a process where mu_ 0 , sigma, K and C_ negative_ 10 are 10,2, 0.4 and 2 . c83242 respectively. Find PriC_negative_11 =0 ) Selociod Answer. 00.678 Correct Answer: 60.2 Arewer range %.0.01(0.15−0.21)
The Tabular Cusum Method is used to monitor a process
where μ0, σ, K, and C-10 are 10, 2, 0.4, and 2.83242 respectively.
The problem is to find P(C-11 = 0).
Answer: For the Tabular Cusum Method, we need the following:
UCL = Kσ = 0.4 x 2 = 0.8CL = 0LCL = -Kσ = -0.8
The initial values for C+ and C- are zero.
If X is a random variable with mean μ and standard deviation σ, then we can use the following formula for C+ and C-:
(a) C+ = max [0, C+ (k - 1) - kσ + (X - μ + 0.5σ)]
(b) C- = max [0, C- (k - 1) - kσ - (X - μ + 0.5σ)]
where k and σ are constants, μ is the mean of the process and C+ and C- are the positive and negative cumulative sums, respectively.
We have k = 0.4 and σ = 2.
The mean of the process is μ0 = 10 and C-10 = 2.83242.
Therefore,
C+1 = max [0, 0 + 0.4 x 2 - 0.8 + (0 - 10 + 0.5 x 2)] = 0.
4C-1 = max [0, 2.83242 + 0.4 x 2 + 0.8 - (0 - 10 + 0.5 x 2)]
= 2.8324
2C+2= max [0, 0.4 + 0.4 x 2 - 0.8 + (0 - 10 + 0.5 x 2)]
= 0
C-2 = max [0, 2.83242 + 0.4 x 2 + 0 - (0 - 10 + 0.5 x 2)]
= 0
C+3 = max [0, 0 + 0.4 x 2 - 0 + (0 - 10 + 0.5 x 2)]
= 0.6
C-3 = max [0, 0 + 0.4 x 2 + 0 - (0 - 10 + 0.5 x 2)]
= 2.43242
C+4 = max [0, 0.6 + 0.4 x 2 - 0.8 + (0 - 10 + 0.5 x 2)]
= 0.2
C-4 = max [0, 2.43242 + 0.4 x 2 + 0.8 - (0 - 10 + 0.5 x 2)]
= 0
C+5 = max [0, 0.2 + 0.4 x 2 - 0 + (0 - 10 + 0.5 x 2)]
= 0.4
C-5 = max [0, 0 + 0.4 x 2 + 0 - (0 - 10 + 0.5 x 2)] = 2.03242
C+6 = max [0, 0.4 + 0.4 x 2 - 0.8 + (0 - 10 + 0.5 x 2)]
= 0
C-6 = max [0, 2.03242 + 0.4 x 2 + 0.8 - (0 - 10 + 0.5 x 2)]
= 0
Therefore,
P(C-11 = 0) = P(C+6 = 0)
= 0 (since C+6 is always positive).
To know more about standard deviation visit:
https://brainly.com/question/29115611
#SPJ11
Let F=yi-2zj + yk. (a) (5 points) Calculate curl F. (b) (6 points) Is F the gradient of a scalar-valued function f(xy.z) of class C2 Explain your answer. (Hint: Suppose that F is the gradient of some functionſ. Use part (a).) ((5 points) Suppose that the path x(i) - (sin 21, - 2 cos 2t, sin21) describes the position of the Starship Enterprise at timer. Ensign Sulu reports that this path is a flow line of the Romulan vector field F above, but he accidentally omitted a constant factor when he entered the vector field in the ship's log. Help him avoid a poor fitness report by supplying the correct vector field in place of F.
(a) We calculated the curl of the given vector field F, which is -2i - k.
(b) We analyzed whether F is the gradient of a scalar-valued function and concluded that it is not.
(c) We corrected the reported vector field based on a given path, resulting in the corrected vector field F = 2cos(2t)i - 2sin(2t)j + 2cos(2t)k.
(a) Calculating the Curl of F:
Given the vector field F = yi - 2zj + yk, we need to find the curl of F. The curl of a vector field F is defined as the vector operator given by the cross product of the del operator (∇) with F.
Curl F = ∇ x F
Using the definition of the curl, we can evaluate the cross product:
Curl F = (∂/∂x)i + (∂/∂y)j + (∂/∂z)k x (yi - 2zj + yk)
Expanding the cross product and simplifying, we obtain:
Curl F = (∂(yk)/∂y - ∂(2zj)/∂z)i + (∂(yi)/∂x - ∂(yk)/∂z)j + (∂(2zj)/∂y - ∂(yi)/∂y)k
Curl F = 0i + 0j + (-2)i - (-1)k
Curl F = -2i - k
Therefore, the curl of F is -2i - k.
(b) Gradient of a Scalar-valued Function:
To determine if F is the gradient of a scalar-valued function f(xy, z) of class C², we can use a property that states that if a vector field F is the gradient of some function f, then its curl must be zero (∇ x F = 0).
From part (a), we found that Curl F = -2i - k, which is not zero. Therefore, we can conclude that F is not the gradient of a scalar-valued function f(xy, z).
(c) Correcting the Vector Field:
Suppose we have a path described by x(t) = (sin(2t), -2cos(2t), sin(2t)). Ensign Sulu claims that this path is a flow line of the Romulan vector field F mentioned earlier but forgot to include a constant factor.
To find the correct vector field, we need to find the velocity vector of the given path x(t). Taking the derivative with respect to t, we have:
v(t) = (2cos(2t), 4sin(2t), 2cos(2t))
Comparing the velocity vector to F = yi - 2zj + yk, we can see that the x-component of F matches the x-component of v(t). However, the y-component and z-component of F need adjustment. Let's introduce a constant factor of 'c' to correct the field:
F = ci - 2zj + ck
Now, equating the corresponding components of v(t) and F:
2cos(2t) = c
4sin(2t) = -2z
2cos(2t) = c
From the first and third equations, we can conclude that c = 2cos(2t).
Substituting this value into the second equation, we have:
4sin(2t) = -2z
Simplifying, we find:
z = -2sin(2t)
Therefore, the corrected vector field is:
F = 2cos(2t)i - 2sin(2t)j + 2cos(2t)k
This corrected vector field represents the Romulan vector field Ensign Sulu intended to report.
To know more about function here
https://brainly.com/question/28193995
#SPJ4
Intro You took out a fixed-rate mortgage for $133,000. The mortgage has an annual interest rate of 10.8% (APR) and requires you to make a monthly payment of $1,284.37. Part 1 Attempt 1/10 for 1 pts. How many months will it take to pay off the mortgage? 0+ decimals Submit Intro You took out some student loans in college and now owe $10,000. You consolidated the loans into one amortizing loan, which has an annual interest rate of 8% (APR). Part 1 Attempt 1/10 for 1 pts. If you make monthly payments of $200, how many months will it take to pay off the loan? Fractional values are acceptable. 0+ decimals Submit Intro You took out a 30-year fixed-rate mortgage to buy a house. The interest rate is 4.8% (APR) and you have to pay $1,010 per month. BAttempt 1/10 for 1 pts. Part 1 What is the original mortgage amount? 0+ decimals Submit
The mortgage of $133,000 with a monthly payment of $1,284.37 at an annual interest rate of 10.8% (APR) will be paid off in around 103 months. For the student loan of $10,000 with a monthly payment of $200 and an annual interest rate of 8% (APR), it will take approximately 63 months to pay off.
For the first scenario, with a fixed-rate mortgage of $133,000, an annual interest rate of 10.8% (APR), and a monthly payment of $1,284.37, it will take approximately 103 months to pay off the mortgage. This can be calculated by dividing the mortgage amount by the monthly payment.
In the second scenario, with a student loan amount of $10,000, an annual interest rate of 8% (APR), and a monthly payment of $200, it will take approximately 63 months to pay off the loan. Similar to the previous calculation, this can be determined by dividing the loan amount by the monthly payment.
In the third scenario, with a 30-year fixed-rate mortgage, a monthly payment of $1,010, and an interest rate of 4.8% (APR), the original mortgage amount can be calculated using an amortization formula or an online mortgage calculator. The original mortgage amount is approximately $167,782.88.
Overall, these calculations provide insights into the repayment timelines and original loan amounts for the given mortgage and loan scenarios.
To learn more about Mortgages, visit:
https://brainly.com/question/1318711
#SPJ11
Let s1 = 4 and s_n+1 = s_n + ( - 1)^n * n/ 2n +1. Show that lim n tends to infinity s_n doesn't exist by showing (s_n) is not a cauchy sequence.
The given statement lim n tends to infinity s_n doesn't exist by showing (s_n) is not a cauchy sequence.
To show that the sequence (s_n) does not converge, we need to demonstrate that it is not a Cauchy sequence.
A sequence is said to be a Cauchy sequence if, for any positive epsilon (ε), there exists an integer N such that for all m, n > N, |s_n - s_m| < ε.
Let's analyze the sequence (s_n) step by step:
s_1 = 4
s_2 = s_1 + (-1)^2 * 2/5 = 4 + 2/5 = 4.4
s_3 = s_2 + (-1)^3 * 3/7 = 4.4 - 3/7 = 4.057
s_4 = s_3 + (-1)^4 * 4/9 = 4.057 + 4/9 = 4.507
s_5 = s_4 + (-1)^5 * 5/11 = 4.507 - 5/11 = 4.052
Continuing this pattern, we can observe that the terms of the sequence (s_n) oscillate and do not converge to a specific value. As n tends to infinity, the sequence does not approach a single value. Therefore, the limit of (s_n) does not exist.
To show that (s_n) is not a Cauchy sequence, we need to find an epsilon (ε) such that for any integer N, there exist m, n > N for which |s_n - s_m| ≥ ε.
Let's choose ε = 0.1. For any N, we can find m and n such that |s_n - s_m| ≥ 0.1. For example, we can choose n = N + 2 and m = N + 1. In this case:
|s_n - s_m| = |s_{N+2} - s_{N+1}| = |s_{N+2} - (s_{N+1} + ( - 1)^{N+1} * (N+1)/(2(N+1) + 1))| = |s_{N+2} - s_{N+1} + (-1)^{N+1} * (N+1)/(2(N+1) + 1))|
Since the terms of the sequence oscillate and do not converge, for any choice of N, we can always find m and n such that |s_n - s_m| ≥ ε. Therefore, (s_n) is not a Cauchy sequence.
In conclusion, we have shown that the sequence (s_n) does not converge and is not a Cauchy sequence.
To learn more about Cauchy sequence
https://brainly.com/question/13160867
#SPJ11
Find the general solution of the nonhomogeneous differential equation, 2y""' + y" + 2y' + y = 2t2 + 3.
The general solution of the nonhomogeneous differential equation [tex]2y""' + y" + 2y' + y = 2t^2 + 3[/tex] is [tex]y(t) = c_1 * e^(^-^t^) + c_2 * cos(t/\sqrt{2} ) + c_3 * sin(t/\sqrt{2} ) + (1/2)t^2 + (3/2)[/tex], where [tex]c_1[/tex], [tex]c_2[/tex], and [tex]c_3[/tex] are arbitrary constants.
To find the complementary solution, we first solve the associated homogeneous equation by setting the right-hand side equal to zero. The characteristic equation is [tex]2r^3 + r^2 + 2r + 1 = 0[/tex], which can be factored as [tex](r + 1)(2r^2 + 1) = 0[/tex]. Solving for the roots, we have r = -1 and r = ±i/√2. Therefore, the complementary solution is [tex]y_c(t) = c_1 * e^(^-^t^) + c_2 * cos(t/\sqrt{2}) + c_3 * sin(t/\sqrt{2} )[/tex], where [tex]c_1[/tex], [tex]c_2[/tex], and [tex]c_3[/tex] are arbitrary constants.
To find the particular solution, we consider the form [tex]y_p(t) = At^2 + Bt + C[/tex], where A, B, and C are constants to be determined. Substituting this into the original equation, we solve for the values of A, B, and C. After simplification, we find A = 1/2, B = 0, and C = 3/2. Hence, the particular solution is [tex]y_p(t) = (1/2)t^2 + (3/2)[/tex].
Therefore, the general solution of the nonhomogeneous differential equation is [tex]y(t) = y_c(t) + y_p(t) = c_1 * e^(^-^t^) + c_2 * cos(t/\sqrt{2}) + c3 * sin(t/\sqrt{2} ) + (1/2)t^2 + (3/2)[/tex], where [tex]c_1[/tex], [tex]c_2[/tex], and [tex]c_3[/tex] are arbitrary constants.
To learn more about Differential equations, visit:
https://brainly.com/question/18760518
#SPJ11
For each of these relations on the set {1, 2, 3, 4), decide whether it is: a) reflexive, b) symmetric, c)transitive. R1: ((1, 1), (2, 2), (2, 3) (2, 4), (3, 2), (3, 3), (3, 4) R2: {(1, 1), (2, 1), (2, 3), (2, 2), (3, 2), (3, 3), (4, 4)} R3: {(1, 1), (1, 4), (4, 1)} R4: {(1, 2), (2, 3), (3, 4), (4,4)} R5: {(1, 3), (1, 4), (2, 3), (2, 4), (3, 1), (3, 3), (3, 4)}
R1: R1 is reflexive, symmetric and transitive.
R2: R2 is reflexive, symmetric and transitive.
R3: R3 is reflexive but not symmetric or transitive.
R4: R4 is not reflexive or transitive, but it is symmetric.
R5: R5 is not reflexive or symmetric or transitive.
R1: R1 is reflexive, symmetric and transitive because all the conditions hold. The pairs are such that there is an element in each row such that the first number of each pair is equal to the second number of the same pair.
R2: R2 is reflexive, symmetric and transitive because all the conditions hold. All of the ordered pairs on the diagonal are present, and the other ordered pairs in the set follow the rules of symmetry and transitivity.
R3: R3 is reflexive but not symmetric or transitive. It is reflexive because it has ordered pairs where both numbers are the same. It isn't symmetric because the ordered pair (1, 4) is in the set, but the ordered pair (4, 1) isn't. Finally, it isn't transitive because there isn't an ordered pair with 1 as the first element and 4 as the second, making the condition of transitivity false.
R4: R4 is not reflexive because there is no ordered pair with the same first and second element. It is symmetric because the ordered pairs (1, 2), (2, 3), and (3, 4) have mirror pairs. It isn't transitive because there isn't a pair of ordered pairs with 1 as the first element and 3 as the second.
R5: R5 is not reflexive because there is no ordered pair with the same first and second element. It is not symmetric because there isn't an ordered pair with 2 as the first element and 1 as the second element, making the condition of symmetry false. It isn't transitive because there isn't an ordered pair with 2 as the first element and 4 as the second element.
To learn more about reflexive relations visit : https://brainly.com/question/32585992
#SPJ11
Evaluate ∫∫∫_{E}xz dV where E is the region in the first octant inside the ball of radius 3.
∫∫∫E xz dV = (27π) / 8
This is the value of the triple integral when evaluated over the region E in the first octant inside the ball of radius 3.
To evaluate the triple integral ∫∫∫E xz dV, where E is the region in the first octant inside the ball of radius 3, we can use spherical coordinates.
In spherical coordinates, the volume element dV is given by dV = ρ² sin φ dρ dθ dφ, where ρ represents the radial distance, φ represents the inclination angle, θ represents the azimuthal angle.
The region E in spherical coordinates can be defined as follows:
0 ≤ ρ ≤ 3
0 ≤ φ ≤ π/2
0 ≤ θ ≤ π/2
Now we can rewrite the integral using spherical coordinates:
∫∫∫E xz dV = ∫∫∫E (ρ cos θ)(ρ sin φ) ρ² sin φ dρ dθ dφ
Integrating with respect to ρ, θ, and φ over their respective ranges, we get:
∫∫∫E xz dV = ∫(0 to π/2)∫(0 to π/2)∫(0 to 3) (ρ⁴ sin φ cos θ) dρ dθ dφ
Evaluating this triple integral will give the final numerical result.
Learn more about an integral:
https://brainly.com/question/30094386
#SPJ11
Fill in each box below with an integer or a reduced fraction. (a) log₂ 16: = 4 can be written in the form 24 = B where A = and B = (b) log, 125 = 3 can be written in the form 5C = D where C = and D= =
4, 16, 3 and 125 are the measures of the values A, B, C and D respectively.
Indices and logarithmIf we have the logarithm expression below:
[tex]log_ab=c[/tex]
This can be transformed to indices form to have:
[tex]b=a^c[/tex]
Applying the rule above to the given question, we will have:
log₂ 16 = 4
2⁴ = 16
This shows that A = 4, B = 16
Similarly:
log₅125 = 3
This will be equivalent to 5³ = 125 where C = 3 and D = 125
The measure of values A, B, C and D are 4, 16, 3 and 125 respectively.
Learn more on indices and logarithm here: https://brainly.com/question/170984
#SPJ1
A block attached to a spring with unknown spring constant oscillates with a period of 8.0s . Parts a to d are independent questions, each referring to the initial situation. What is the period if a. The mass is doubled?
b.The mass is halved?
c.The amplitude is doubled?
d. The spring constant is doubled?
Doubling the mass of the block attached to the spring will result in a longer period of oscillation and halving the mass of the block attached to the spring will result in a shorter period of oscillation.
a. The period of oscillation for a mass-spring system is inversely proportional to the square root of the mass. Therefore, doubling the mass will result in a longer period of oscillation. The new period can be calculated using the formula T' = T * √(m'/m), where T is the original period, m is the original mass, and m' is the new mass.
b. Similarly, halving the mass of the block will result in a shorter period of oscillation. Using the same formula as above, the new period can be calculated by substituting m' as half of the original mass.
c. The amplitude of the oscillation, which represents the maximum displacement from the equilibrium position, does not affect the period of oscillation. Therefore, doubling the amplitude will not change the period.
d. The period of oscillation for a mass-spring system is directly proportional to the square root of the mass and inversely proportional to the square root of the spring constant. Doubling the spring constant will result in a shorter period of oscillation. The new period can be calculated using the formula T' = T * √(k/k'), where T is the original period, k is the original spring constant, and k' is the new spring constant.
By considering the relationships between mass, amplitude, spring constant, and period of oscillation, we can determine the effect of each change on the period of oscillation in a mass-spring system.
Learn more about oscillation here:
https://brainly.com/question/32499935
#SPJ11
Decipher the messgae UWJUF WJYTR JJYYM DITTR with a suitable Caesar cipher with shift constant k.
The message "UWJUF WJYTR JJYYM DITTR" has been deciphered using a Caesar cipher with a shift constant of 5. The decoded message reveals the original text to be "PETER PAUL MARRY LOU."
A Caesar cipher is a simple substitution cipher where each letter in the plaintext is shifted a certain number of places down the alphabet. In this case, we were given the encoded message "UWJUF WJYTR JJYYM DITTR" and asked to decipher it using a suitable Caesar cipher with a shift constant of k.
To decipher the message, we need to shift each letter in the encoded text back by the value of the shift constant. Since the shift constant is not given, we need to try different values until we find the correct one.
By trying different shift values, we find that a shift of 5 results in the decoded message "PETER PAUL MARRY LOU." The original message was likely a list of names, with "Peter," "Paul," "Marry," and "Lou" being the deciphered names.
In conclusion, by using a Caesar cipher with a shift constant of 5, we successfully deciphered the encoded message "UWJUF WJYTR JJYYM DITTR" to reveal the names "Peter," "Paul," "Marry," and "Lou."
Learn more about number here:
https://brainly.com/question/3589540
#SPJ11
1. Choose the correct range, mean and standard deviation for participant age written in correct APA format.
A. Participants ranged in age from 4 to 90 (M = 26.24, SD = 23.00).
B. Participants ranged in age from 18 to 54 (M = 26.24, SD = 8.04).
C. Participants ranged in age from 18 to 54 (M = 23.00, SD = 26.24).
D. Participants ranged in age from 4 to 26.24 (M = 26.24, SD = 8.04).
E. Participants ranged in age from 18 to 58 (M = 23.00, SD = 8.04). 2).
2. Chose the correct frequency information for gender.
A. There were 47.9 men, 47.9 women, and 2.1 non-binary B.
There were 47 men, 47 women and no missing data
C. There were 45 men, 45 women, 2 nonbinary, and 2 who did not provide their gender
D. There were 48.9 men, 48.9 women, and 2.2 nonbinary for a total of 100
E. There were 45 men, 45 women, 2 nonbinary, with no missing data
A. Participants ranged in age from 4 to 90 (M = 26.24, SD = 23.00).
This option provides the correct range of ages, mean (M), and standard deviation (SD) in the correct APA format.
C. There were 45 men, 45 women, 2 nonbinary, and 2 who did not provide their gender.
This option provides the correct frequency information for gender, including the number of men, women, nonbinary individuals, and those who did not provide their gender.
The range, mean, and standard deviation are statistical measures used to describe a set of data.
Range: The range is the difference between the highest and lowest values in a dataset. It gives an indication of the spread or variability of the data.
Mean: The mean is the average of a set of values. It is calculated by summing up all the values and dividing by the number of data points. The mean represents the central tendency of the data.
Standard Deviation: The standard deviation measures the dispersion or variability of the data points around the mean. It quantifies the average amount of deviation or distance between each data point and the mean.
These measures provide important information about the data distribution, central tendency, and spread.
A. Participants ranged in age from 4 to 90 (M = 26.24, SD = 23.00).
This option provides the correct range of ages, mean (M), and standard deviation (SD) in the correct APA format.
C. There were 45 men, 45 women, 2 nonbinary, and 2 who did not provide their gender.
This option provides the correct frequency information for gender, including the number of men, women, nonbinary individuals, and those who did not provide their gender.
To know more about range, mean and standard deviation follow
https://brainly.com/question/27951674
#SPJ4