A square underwent a dilation using a scale factor of 1:4. Find the missing side length, x, of the smaller square

Answer:

48 treats

Step-by-step explanation:

16 treats / 2 hours = 8 treats / hour

8 treats / hour x 6 hours =

48 treats

Hope that helps! :)

One faces a tradeoff between the number of courses and hours of work due to limited available time. Taking X courses while working X hours per week is impossible as it exceeds the time constraint.

The tradeoff between the number of courses and hours of work arises due to the finite number of hours available in a week. Assuming an individual has X hours per week, this time must be divided between courses and work.

To achieve a B or better in a course, it is necessary to dedicate at least X hours per course per week. Therefore, taking X courses while working X hours per week would require dedicating X hours per course, resulting in a total time commitment exceeding the available X hours.

Conversely, if only one class is taken while working X hours per week, the time commitment for a single course is less than X hours. This scenario leaves a significant amount of free time remaining, as the total time dedicated to the course and work does not exhaust the available X hours.

In summary, the tradeoff occurs because the time available is limited, and the minimum time requirement per course restricts the number of courses that can be taken while maintaining a specific work schedule.

Learn more about hours here:

brainly.com/question/28424147

#SPJ11

Answer:

Step-by-step explanation:

I don’t know

We want to find the opening price of the stock in the beginning of the day. We will find that the solution is $89.50.

Let's say that the opening price of the stock was X.

Then, it is increased 6% to get to $94.87

This means that the 106% of X is equal to $94.87, then we can solve:

1.06*X = $94.87

Where we wrote 106% in decimal form, now we can just solve this for X:

X  = $94.87/1.06 = $89.50

This means that the price of the stock in the beginning of the day was $89.50

If you want to learn more about percentages, you can read:

https://brainly.com/question/843074

Answer:

The angle of elevation is 17°.

Step-by-step explanation:

Let's draw the scenario to better understand the problem:

Focusing on the right triangle formed, it appears that we get measures of the two sides of the right triangles.

Opposite Side = 3 Ft.

Adjacent Side = 10 Ft.

To find the angle of elevation, we will be using the Targent Function:

[tex]targent \: 0 = \frac{opposite \: side}{adjacent \: side} \\ targent \: 0 = \frac{3}{10} \\ 0 = {targent}^{ - 1} ( \frac{3}{10} ) \\ 0 = 16.69924423399 = 17[/tex]

Therefore, the angle of elevation is 17°.

Answer:

X = $9.00 for 1 pound of Jelly Beans

Y = $7.00 for 1 pound of Gummy Worms

Step-by-step explanation:

Ok, to start we need to make up some notation. It looks like you've chosen X and Y as your variables which works for me.

First lets say X = cost of one pound of jelly beans and Y = cost of one pound of gummy worms

Now let's put together our equations

2X + 4Y = 46

3X + 2Y = 41

Now we need to solve for one of the variables using substitution or elimination. Since none of the variables are isolated, let's use elimination by multiplying the bottom equation by -2.

2X + 4Y = 46

-6X - 4Y = -82

___________

-4X + 0 = -36

-4X = -36

X = 9 or $9.00 per pound

Now we can plug that back into own of the equations and solve for Y

2(9) + 4Y = 46

 18 + 4Y = 46

4Y = 28

Y = 7 or $7.00 per pound

Answer:

10,000 * (square miles in the city)

Step-by-step explanation:

You've been given a population of people for every square mile (10,000) and you're trying to figure out how many people live in the city.

To convert people per a square mile into people, you'll need to know how many square miles you have. I assume you've been given this as the size of the city or how many square miles the city takes up. Just multiply the amount of people per a square mile by the amount of square miles in the city, and it'll give you the population of people in every square mile of the city (the population).

Note:

This is people per a square mile, or in other words, for every square mile of city, 10,000 people live there. If you have 2 square miles of city, then 2 * 10,000 = 20,000 people live there.

Answer: A

Step-by-step explanation:

1) The solutions to the equation system are x₁ = 11/39 and x₂ = -7/39.

2) The difference quotient as a function of Δr is -4.

3)  f'(-1) = -4 and f'(5) = -4.

To solve the equation system using Cramer's rule, we need to find the determinant of the coefficient matrix A and the determinants of the matrices obtained by replacing each column of A with the column on the right-hand side.

The given equation system is:

8x₁ + 9x₂ = 2

11x₁ + 2x₂ = 3

7x₁ + 6x₂ = 1

Step 1: Calculate the determinant of the coefficient matrix A.

A = |8 9|

|11 2|

|7 6|

|A| = (8 * 2) - (9 * 11)

    = -78

Step 2: Calculate the determinant of the matrix obtained by replacing the first column of A with the column on the right-hand side.

A₁ = |2 9|

|3 2|

|1 6|

|A₁| = (2 * 2) - (9 * 3)

     = -22

Step 3: Calculate the determinant of the matrix obtained by replacing the second column of A with the column on the right-hand side.

A₂ = |8 2|

|11 3|

|7 1|

|A₂| = (8 * 3) - (2 * 11)

     = 14

Step 4: Calculate the solutions x₁ and x₂ using Cramer's rule.

x₁ = |A₁| / |A|

   = -22 / -78

   = 11/39

x₂ = |A₂| / |A|

    = 14 / -78

    = -7/39

Therefore, the solutions to the equation system are x₁ = 11/39 and x₂ = -7/39.

Now, let's move on to the second part of your question regarding the function f(r) = 57 - 4r.

(a) To find the difference quotient as a function of Δr (Δr represents the change in r):

Difference quotient = (f(r + Δr) - f(r)) / Δr

Expanding and simplifying the expression:

Difference quotient = (57 - 4(r + Δr) - (57 - 4r)) / Δr

                                = (57 - 4r - 4Δr - 57 + 4r) / Δr

                                = -4Δr / Δr

                                = -4

Therefore, the difference quotient as a function of Δr is -4.

(b) To find f'(-1) and f'(5), we need to find the derivative of f(r) with respect to r.

f'(r) = d/dx (57 - 4r)

     = -4

Substituting r = -1 and r = 5 into f'(r), we get:

f'(-1) = -4

f'(5) = -4

Therefore, f'(-1) = -4 and f'(5) = -4.

Learn more about Cramer's Rule at

brainly.com/question/30682863

#SPJ4

Answer:

length = 9 in ; width = 4 in

Step-by-step explanation:

1) formula of the area of a rectangle

A = base x width

2) write an equation with the given informations:

w x (3w-3) = 36

3) solve the equation

-  multiply W by 3w and -3

3w^2 -3w = 36

- divide the two members by 3

w^2 - w = 12

- add up -12 at the two members

w^2-w -12 = 12 -12

w^2 - w - 12 = 0

- find two numbers whose sum is -1 and whose product is -12 and factorise the equation

(w-4)(w+3) = 0

- find the two solutions

w-4 = 0

w = 4

w+3 = 0

w = -3

4)remember that a length can’t be negative.

w = 4 is the only solution

5) find the length

4x3 - 3 = 9

Answer:

9 - s = 4

Step-by-step explanation:

9 - 6 is 3, not 4, so thats the answer!

The equation is s = 6 not the solution is 9 - s = 4.

An equation can be defined as a mathematical statement consisting of an equal symbol between two algebraic expressions that have the same value.

For which equation is s = 6 not the solution?

1. The solution of the equation 4 s = 24 is;

[tex]\rm4 s = 24\\\\s=\dfrac{24}{4}\\\\s=6[/tex]

2. The solution of the equation 9 - s = 4  is;

[tex]\rm 9 - s = 4\\\\s=9-4\\\\s=5[/tex]

3. The solution of the equation s + 6 = 12 is;

[tex]\rm s + 6 = 12\\\\s=12-6\\\\s=6[/tex]

4. The solution of the equation s - 4 = 2 is;

[tex]\rm s - 4 = 2\\\\s=2+4\\\\s=6[/tex]

Hence, the equation is s = 6 not the solution is 9 - s = 4.

Learn more about equation here;

https://brainly.com/question/15068986

#SPJ2

The linear speed of a point on the circumference is approximately 9895 feet per minute.

(a) To find the angular speed in radians per minute, we need to convert the given rotational speed from rpm (revolutions per minute) to radians per minute. Since there are 2π radians in one revolution, we can use the conversion factor:

Angular speed (in radians per minute) = Rotational speed (in rpm) * 2π

Given that the rotational speed is 2100 rpm, we can calculate the angular speed:

Angular speed = 2100 rpm * 2π ≈ 13194 radians per minute

Therefore, the angular speed of the wheel is approximately 13194 radians per minute.

(b) To find the linear speed of a point on the circumference in feet per minute, we can use the formula:

Linear speed = Angular speed * Radius

Given that the radius of the wheel is 9 inches, we need to convert it to feet:

Radius = 9 inches * (1 foot / 12 inches) = 0.75 feet

Now, we can calculate the linear speed:

Linear speed = 13194 radians per minute * 0.75 feet ≈ 9895 feet per minute

Therefore, the linear speed of a point on the circumference is approximately 9895 feet per minute.

to learn more about circumference click here:

brainly.com/question/23881522

#SPJ11

Answer:

4.5

Step-by-step explanation:

7 TURKEY AND 13 HAM

I USED CALCULATOR BTW

Answer:

2 cups

Step-by-step explanation:

16/8=2 so it is 2 cups

The correct option regarding the perimeter of the polygon in this problem is given as follows:

5/3mn³ + 3mn² + 3m².

The perimeter of a polygon is given by the sum of all the lengths of the outer edges of the figure, that is, we must find the length of all the edges of the polygon, and then add these lengths to obtain the perimeter.

Hence the expression for the perimeter is given as follows:

1/3mn³ + mn² + m² + 2mn³ + 2mn² + 3m².

Combining the like terms, the perimeter is given as follows:

5/3mn³ + 3mn² + 3m².

More can be learned about the perimeter of a polygon at https://brainly.com/question/3310006

#SPJ1

The percent tip is 13.2%.

To find out what percentage Patrick gave as tip, we need to divide the tip amount by the total bill amount and then convert the result into a percentage.

For this question:

Patrick left an $7 tip on a $53 restaurant bill. What percent tip is that?

Solution:The percentage of tip can be found using the following formula:

% = (Tip amount / Total bill amount) x 100

Plugging in the given values we get:

% = (7 / 53) x 100% = 0.132 x 100% = 13.2 %

Therefore, Patrick gave a 13.2% tip on his restaurant bill.

#SPJ11

Let us know more about percentage:https://brainly.com/question/29749683.

It is proved that if A1, A2,...,An and B are sets, then (A1 −B) ∩(A2 −B) ∩...∩(An−B) = (A1 ∩A2 ∩...∩An) −B.

To prove the given statement using induction, we need to show that it holds true for a base case and then demonstrate that if it holds for an arbitrary value of 'n', it also holds for 'n + 1'.

Base Case (n = 1):

Let's consider the base case where 'n = 1'. We have two sets A1 and B, and we want to prove that (A1 - B) = (A1 - B).

(A1 - B) ∩ (A1 - B) = (A1 - B)  [Using the definition of set difference]

This satisfies the given statement for the base case.

Inductive Step

Assuming that the given statement holds for 'n = k', let's prove that it holds for 'n = k + 1'.

We have sets A1, A2, ..., Ak+1, and B. We want to prove that:

(A1 - B) ∩ (A2 - B) ∩ ... ∩ (Ak+1 - B) = (A1 ∩ A2 ∩ ... ∩ Ak+1) - B

Using the inductive hypothesis, we can rewrite the left-hand side (LHS) as:

[(A1 ∩ A2 ∩ ... ∩ Ak) - B] ∩ (Ak+1 - B)

To prove the equality, we need to show that each side is a subset of the other.

1. LHS ⊆ RHS:

Let x be an arbitrary element in LHS. This means that x belongs to each set in the intersection on the LHS: (A1 - B), (A2 - B), ..., (Ak+1 - B). By the definition of set intersection, x also belongs to (A1 - B), (A2 - B), ..., (Ak - B), and (Ak+1 - B).

Since x belongs to each set in the intersection (A1 - B) ∩ (A2 - B) ∩ ... ∩ (Ak+1 - B), it follows that x belongs to (A1 ∩ A2 ∩ ... ∩ Ak) - B. Therefore, x ∈ RHS.

2. RHS ⊆ LHS:

Now let y be an arbitrary element in RHS. This means that y belongs to (A1 ∩ A2 ∩ ... ∩ Ak+1) - B. By the definition of set difference, y belongs to (A1 ∩ A2 ∩ ... ∩ Ak+1) and y does not belong to B.

Since y belongs to (A1 ∩ A2 ∩ ... ∩ Ak+1), it implies that y belongs to each set A1, A2, ..., Ak+1. By the definition of set difference, y does not belong to B, so y also belongs to each set (A1 - B), (A2 - B), ..., (Ak+1 - B).

Therefore, y ∈ LHS.

Since we have shown that LHS ⊆ RHS and RHS ⊆ LHS, it follows that (A1 - B) ∩ (A2 - B) ∩ ... ∩ (Ak+1 - B) = (A1 ∩ A2 ∩ ... ∩ Ak+1) - B.

By the principle of mathematical induction, the statement holds for all 'n', completing the proof.

Learn more about principle of mathematical induction here

https://brainly.com/question/31244444

#SPJ4

Answer: the answer is 6.06%, however if it is rounded it's 6.0%

Step-by-step explanation:

The approximate Population density in the circular petri dish with a radius of 40 millimeters and 2,100 bacteria is approximately 0.418 bacteria per square millimeter.  After rounding up the bacteria becomes 0.42 per sq. meter hence the correct option is b  

The approximate population density in the circular petri dish, we need to calculate the area of the dish and divide the total number of bacteria by that area.

The formula to calculate the area of a circle is: A = πr^2, where A represents the area and r is the radius.

In this case, the radius of the petri dish is given as 40 millimeters. Therefore, the area can be calculated as follows:

A = 3.14 * (40)^2

A = 3.14 * 1600

A ≈ 5024 square millimeters

Next, we divide the total number of bacteria (2,100) by the calculated area to find the population density:

Population density = 2,100 bacteria / 5024 square millimeters

Population density ≈ 0.418 bacteria per square millimeter

Therefore, the approximate population density in the circular petri dish is 0.418 bacteria per square millimeter.

in scientific calculations, it is customary to use the value of π as 3.14 for simplicity, even though it is an irrational number with a longer decimal representation.

When writing about scientific concepts or calculations, it is crucial to ensure academic integrity by avoiding plagiarism. This can be done by understanding and explaining the concepts in your own words, citing any external sources used, and providing accurate calculations based on the given information.

In conclusion, the approximate population density in the circular petri dish with a radius of 40 millimeters and 2,100 bacteria is approximately 0.418 bacteria per square millimeter.  After rounding up the bacteria becomes 0.42 per sq. meter hence the correct option is b  

To know more about Population .

https://brainly.com/question/31101410

#SPJ8

Answer:

1.3 ounces, 1.3*5 =6.5

Answer:

40%

Step-by-step explanation:

Answer: 50, 60, Less.

Step-by-step explanation: The theoretical probability of the coin landing heads up is 50%

Based on​ Liz's results, the experimental probability of the coin landing heads up is 60

The theoretical probability is less than the experimental probability in this experiment.

Hope this helped have a nice day!

Answer:

Step-by-step explanation:

x = 87.2ft

Hope that helps :)

Answer:

Add up all of the numbers, and divide by the number of digits. To put it another way, the total is divided by the count.

Step-by-step explanation:

so ... 2,4,4,2

2+4+4+2= 12

12 divided by 4=3

i think 3 is the mean....

hope this helps.....

Answer:

1,250 millileters

Step-by-step explanation:

The computation of the number of milliters of the sports drink left is shown below:

Given that

The 2-liter sports drink is purchased

And, drank 250 millimeters and than drank one-half liter of the drink

Now convert liter to millileter

1 litre = 1000 milliliter.

2 liters = 2 × 1000 milliliters.

= 2000 milliliters.

Now the left drink would be

= (2000 - 250) - (250 × 2)

= 1,750 - 500

= 1,250 millileters

89 inches!

Because each foot is 12 inches and 12*7=84 and 84+5=89!

a. To determine if the two populations of crawfish from Devon and Cornwall have the same mean carapace length, we can use the two-sample t-test.

This test compares the means of two independent samples to assess whether they are significantly different.

We can calculate the sample means and sample standard deviations for both groups:

Next, we calculate the t-value using the formula:

To determine if this t-value is statistically significant, we need to compare it to the critical value from the t-distribution for the given degrees of freedom

If the calculated t-value falls outside the critical region, we can reject the null hypothesis and conclude that the two populations have different mean carapace lengths. Otherwise, we fail to reject the null hypothesis and conclude that there is not enough evidence to suggest a significant difference in the mean carapace length between the two populations.

b. To answer the question using the Wilcoxon rank sum test, we need to combine the observations from both samples, assign ranks based on their relative positions, and calculate the sum of ranks for one of the samples (either Devon or Cornwall). The null hypothesis for this test is that the two distributions are the same.

To know more about Wilcoxon's rank:- https://brainly.com/question/29772048

#SPJ11

Answer:

p) = 17/30 or 0.56

q) = 191/60 or 3 11/60