An element has four naturally occurring isotopes with the masses and natural abundances given here. Isotope Mass (amu) Abundance (%) 1 89.90470 52.93 2 90.90565 11.54 3 91.90504 17.65 4 93.90632 17.88 Find the atomic mass of the element. Express your answer to four significant figures and include the appropriate units.

Answer:

C) A mass of 750 g and a volume of 70 dL .

Explanation:

Hello,

In this case, for substantiating the substance having the lowest density we need to compute it in the same units for each case as shown below:

[tex]\rho=\frac{m}{V}[/tex]

A) [tex]\rho =\frac{1.5kg}{1.2L}*\frac{1000g}{1kg} *\frac{1L}{1000mL}=1.25g/mL[/tex]

B) [tex]\rho =\frac{25g}{20mL}*=1.25g/mL[/tex]

C) [tex]\rho =\frac{750g}{70dL}*\frac{10dL}{1L}*\frac{1L}{1000mL} =0.107g/mL[/tex]

D) [tex]\rho =\frac{15mg}{25\mu L}*\frac{1g}{1000mg} *\frac{1000\mu L}{1mL}=0.6g/mL[/tex]

Therefore, the lowest density corresponds to C) A mass of 750 g and a volume of 70 dL

Regards.

Answer:

14.83mL

Explanation:

11.6/0.81=14.3

Answer:

2450 cm3

Explanation:

Volume of cylinder = V=πr2h

2.45L = 2450mL

1mL = 1 cm cubed

2450mL = 2450 cm cubed

The volume of the cylinder container in cubic centimeters is 2.45 × 10³ cm³.

We usually can find the volume of a cylinder applying the following expression.

[tex]V = \pi r^{2} h[/tex]

where,

Since we don't know the height, we will have to use the information that it can hold 2.45 L of water. We can convert liters to cubic centimeters using the following conversion factors:

[tex]2.45 L \times \frac{1000mL}{1L} \times \frac{1cm^{3} }{1mL} =2.45 \times 10^{3} cm^{3}[/tex]

The volume of the cylinder container in cubic centimeters is 2.45 × 10³ cm³.

You can learn more about unit conversions here: https://brainly.com/question/19420601

Answer:

a. Conversion of A to C is exergonic.

Explanation:

In the problem:  C→ B occurs with ΔG = + 16 kJ/mol

It is possible to sum ΔG of reactions to obtain ΔG of another related reaction:

A → B ΔG = -14kJ/mol

C → B ΔG = +16kJ/mol

A → C ΔG = -14kJ/mol - (+16kJ/mol) = -30kJ/mol

As ΔG < 0

The reaction is exergonic

Under these condition, the reaction occurs. But under another conditions, the reaction will be at equilibrium (ΔG = 0)

A reaction is entropically driven if ΔG < 0 and ΔS is high. But we don't have information of ΔS.

As ΔG <0, the reaction is not spontaneous in the reverse direction

Right option is:

Answer:

www.doe.virginia.gov/testing/sol/standards_docs/...

Explanation:

did you get the answer??

Answer:

2.954grams of pottasium for that week

Explanation:

According to this question, a medium-sized that weighs 118grams contains 422 milligrams (mg) of potassium nutrient.

If someone eats a medium-sized banana each day for a week, this means that the person has consumed 422mg of pottasium that day.

Since there are 7days in a week, the person will consume 422 × 7 = 2954 mg of pottasium that week.

The question asks for the total pottasium intake in grams for that week, hence, we need to convert 2954 milligrams to grams.

1000mg = 1 g

Hence, 2954mg will be 2954/1000

= 2.954grams

Therefore, 2.954grams of pottasium are ingested by that person that week.

Answer:

dispersion.

Explanation:

The molecule, PF2Cl3 is trigonal bipyramidal. The dipoles in the molecule cancel out since there is a symmetric charge distribution around the molecule hence the resultant dipole moment of the molecule is zero.

If the molecule is nonpolar, then the dominant intermolecular forces present are the weak dispersion forces, hence the answer above.

Answer:

The speed of light in a vacuum is 6.69 * 10⁸ [tex]\frac{miles}{h}[/tex]

Explanation:

Two magnitudes are directly proportional when increasing one quantity increases the other in the same proportion or when decreasing one quantity decreases the other in the same proportion.

The rule of three allows the resolution of problems that are related to the proportionality of three known values ​​and a fourth value that is always an unknown. In other words, it is useful to establish the proportionality between 2 values ​​a and b through the knowledge of a third value c in order to calculate a fourth value x. In the case of direct margins, the rule of three between a, b and c and the unknown x is:

a ⇒ b

c ⇒ x

So: [tex]x=\frac{c*b}{a}[/tex]

In this case, knowing that 1 meter is equal to 0.000621 miles, 1 second is equal to 0.000278 hours, the simple rule of three is applied as follows: if 1 meter is equal to 0.000621 miles, 2.998 * 10⁸ meters are equal to how many miles?

[tex]miles=\frac{2.998*10^{8} meters*0.000621 miles}{1 meter}[/tex]

miles=186,175.8

[tex]2.998*10^{8} \frac{m}{s} =\frac{2.998*10^{8}m}{s}=\frac{186,175.8miles}{s}[/tex]

Replacing the seconds by their equivalent in meters:

[tex]\frac{186,175.8miles}{s} =\frac{186,175.8miles}{0.000278 hours}= 669,697,122.3 \frac{miles}{h}[/tex]

Then:

2.998*10⁸ [tex]\frac{m}{s}[/tex] = 669,697,122.3 [tex]\frac{miles}{h}[/tex] ≅ 6.69 * 10⁸ [tex]\frac{miles}{h}[/tex]

The speed of light in a vacuum is 6.69 * 10⁸ [tex]\frac{miles}{h}[/tex]

Answer:

[tex]m_{HNO_3}=27.4gHNO_3[/tex]

Explanation:

Hello,

In this case, for the chemical reaction:

[tex]3 NO_2(g) + H_2O(l) \rightarrow 2 HNO_3(aq) + NO(g)[/tex]

The first step is to compute the theoretical yield of nitric acid via stoichiometry in terms of the 3:2 ratio between nitrogen dioxide (molar mass = 46 g/mol) and nitric acid (molar mass = 63 g/mol) respectively:

[tex]m_{HNO_3}^{theoretical}=40.0gNO_2*\frac{1molNO_2}{46gNO_2}* \frac{2molHNO_3}{3molNO_2} *\frac{63gHNO_3}{1molHNO_3} \\\\m_{HNO_3}^{theoretical}=36.52gHNO_3[/tex]

Now, the actual amount is computed by taking into account the 75.0-% percent yield:

[tex]m_{HNO_3}=0.75*36.5gHNO_3\\\\m_{HNO_3}=27.4gHNO_3[/tex]

Best regards.

Answer:

There are 18572.9 arcminutes in 86% of a circle.

Explanation:

The degrees in 86% of a circle is:

[tex] degrees = \frac{86}{100}*360 = 309.6 ^{\circ} [/tex]

Now, we need to find the number of arcminutes in 309.6°:

[tex] arcminute = \frac{59.99 arcminute}{1 degree}*309.6 degrees = 18572.9 [/tex]

Therefore, there are 18572.9 arcminutes in 86% of a circle.

I hope it helps you!

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]Density = \frac{mass}{volume} [/tex]

From the question

mass of copper = 89.6 g

volume = 10 cm³

Substitute the values into the above formula and solve

That's

[tex]Density = \frac{89.6}{10} [/tex]

We have the final answer as

Hope this helps you

Answer:

[tex]\rho =10.07\frac{lb}{cup}[/tex]

Explanation:

Hello,

In this case, given that 1 cup equals 236.588 mL and 1 pound equals 453.6 g, the required density in pounds per cup turns out:

[tex]\rho =19.3\frac{19.3g}{mL}*\frac{1lb}{453.6g}*\frac{236.588mL}{1cup}\\ \\\rho =10.07\frac{lb}{cup}[/tex]

Best regards.

Answer:

Mercury

Explanation:

Answer:

Maximum expected yield = 87.2%

Explanation:

Equations of reactions:

Main reaction: N₂O₄(l) + 2N₂H₄(l) ---> 3N₂(g) + 4H₂O(g)

Side reaction:  2N₂O₄(l) + N₂H₄(l) ----> 6NO(g) + 2H₂O(g)

Molar mass of N₂O₄ = 92 g/mol; molar mass of N₂H₄ = 32 g/mol; molar mass of N₂ = 28 g/mol; molar mass of of NO = 30 g/mol; molar mass of water = 18 g/mol

In the main reaction, 92 g of N₂O₄ reacts with 2 * 32 g of N₂H₄ to produce 3 * 14 g of N₂.

101.1 g of N₂O₄ will react with 2 * 32 * 101.1 / 92 g of N₂H₄ = 70.33 g of N₂H₄

N₂O₄ is the limiting reactant

101.1 g of N₂O₄ will react to produce 3 * 14 * 101.1 / 92 g of N₂ =  46.15 g of  N₂

In the side reaction, (6 * 30 g) of NO  is produced  from (2 * 92 g) of N₂O₄ and 32 g of N₂H₄

12.7 g of N₂O₄ will be produced from ( 2 * 92 * 12.7/180 g) of N₂O₄ and (32 * 12.7/180) g of N₂H₄ to produce

mass of N₂O₄ used = 12.98 g

mass of N₂H₄ used = 2.26 g

mass of N₂O₄ left for main reaction = 101.1 - 12.98 = 88.12 g

mass of N₂H₄ left for main reaction = 101.1 - 2.26 = 98.84 g

In the main reaction, 92 g of N₂O₄ reacts with 2 * 32 g of N₂H₄ to produce 3 * 14 g of N₂

88.12 g of N₂O₄ will react with 2 * 32 * 88.12 / 92 g of N₂H₄ = 61.30 g of N₂H₄

N₂O₄ is the limiting reactant.

88.12 g of N₂O₄ will to react produce 3 * 14 * 88.12 / 92 g of N₂ =  40.23 g of  N₂

Percentage yield = (theoretical yield/actual yield) * 100%

Percentage yield = (40.23/46.15) * 100% = 87.2%

Therefore, maximum expected yield = 87.2%

Answer:

2,200 milligrams

Explanation:

40 mg per 1 kilogram means 40 times 55 which is 2,200 mg

want to talk

Explanation:

Answer:

octane

Explanation:

heptane: an alkane with 7 C's

nonane: an alkane with 9 C's

hexane: an alkane with 6C's

The name of the linear alkane that contains 8 carbons is octane. The correct option is C.

Saturated hydrocarbons are alkanes. This indicates that single bonds are used to connect each of their carbon atoms. They are not reactive. They react with oxygen, the process called combustion or burning. Examples are methane, ethane, etc.

Alkane is of many carbon chains. They can be single, double, triple, etc. The alkane that has 8 carbon atoms is called octane. A linear hydrocarbon is an octane. The bonds between each carbon in the molecular skeleton are limited to two.

5 carbon atoms are called pentane, six carbon atoms are called hexane, and seven carbon atoms are called heptane, as in series, the eighth carbon atom is called octane.

Thus, the correct option is C. octane.

To learn more about alkanes, refer to the link:

https://brainly.com/question/19465365

#SPJ2

Answer:

No, it acts only as a reducing agent

Explanation:

Sulphur dioxide is a strong reducing agent. It is mainly used to prevent dried fruit from being oxidised and discoloured.

Given :

Molarity of [tex]Na_3PO_4[/tex] , M = 0.213 M .

To Find :

How many ml of 0.213 M of [tex]Na_3PO_4[/tex] are required to deliver 66.4 mmol [tex]Na^+[/tex].

Solution :

Volume required  :

[tex]V=[\text{ 66.4 mmol of }Na^+] + [\dfrac{\text{1 mm of }Na_3PO_4}{\text{3 mmol of }Na^+}]+[\dfrac{\text{1 ml }Na_3PO_4}{\text{0.213 mmol of }Na_3PO_4}][/tex]

So ,

[tex]V=\dfrac{66.4}{3\times 0.213}\ ml\\\\V=103.91\ ml[/tex]

Therefore , volume of [tex]Na_3PO_4[/tex] required is 103.91 ml .

Hence , this is the required solution .

Answer:

B - The amount of  OF2(g)  produced is halved.

Explanation:

Because its right.

When instead of 2 moles of F₂, 1  mole of F₂ reacts with excess NaOH, the amount of OF₂(g) produced is halved.

Let's consider the balanced reaction that occurs when F₂ reacts with NaOH.

2 F₂(g) + 2 NaOH(aq) → OF₂(g) + 2 NaF(aq) + H₂O(l)

First, let's see the moles of OF₂ and NaF obtained from 2 moles of F₂, using the molar ratios derived from the balanced chemical equation.

[tex]2 mol F_2 \times \frac{1 molOF_2}{2mol F_2} = 1 mol OF_2\\\\2 mol F_2 \times \frac{2 molNaF}{2mol F_2} = 2 mol NaF[/tex]

Now, let's compare with the moles of OF₂ and NaF obtained from 1 mol of F₂, again using the same molar ratios derived from the balanced chemical equation.

[tex]1 mol F_2 \times \frac{1 molOF_2}{2mol F_2} = 0.5 mol OF_2\\\\1 mol F_2 \times \frac{2 molNaF}{2mol F_2} = 1 mol NaF[/tex]

As we can see, since we have half the amount of F₂, we obtain half the amount of the products. Then, the only right option is: The amount of OF₂(g) produced is halved.

When instead of 2 moles of F₂, 1  mole of F₂ reacts with excess NaOH, the amount of OF₂(g) produced is halved.

You can learn more about molar ratios here: https://brainly.com/question/9408497

Answer:

yes!!!!!!!!!!

Explanation:

now go learn    son

Answer:

A. 0.2395 w/w %

B. 2394ppm

Explanation:

A. To find concentrationin percent by mass of the solution we need to calculate mass of glycerol and mass of water. The formula is:

Mass glycerol / Total mass * 100

Mass glycerol:

The solution is 2.6x10⁻²moles / L. As there is 1L of solution there are 2.6x10⁻² moles of glycerol. In mass (Using molar mass glycerol: 92.09g/mol):

2.6x10⁻² moles of glycerol * (92.09g / mol) = 2.394g glycerol

Mass of water:

998.9mL and density = 0.9982g/mL:

998.9mL * (0.9982g/mL) = 997.1g of water.

That means percent by mass is:

% by mass: 2.394g / (997.1g + 2.394g) * 100 = 0.2395 w/w %

B. Parts per million are mg of glycerol per L of solution. As in 1L there are 2.394g. In mg:

2.394g * (1000mg / 1g) = 2394mg:

Parts per million: 2394mg / L = 2394ppm

Considering the definition of percent by mass

A) the concentration of the glycerol solution in percent by mass is 0.2395%.

B) the concentration of the glycerol solution is 2394.34 ppm.

A) The Percentage Composition is a measure of the amount of mass that an element occupies in a compound and indicates the percentage by mass of each element that is part of a compound.

The mass percentage of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.

The mass percentage is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:

[tex]mass percentage=\frac{mass of solute}{mass of solution} x100[/tex]

In this case, you have a 2.600×10⁻² M solution of glycerol (C₃H₈O₃) in water. The sample was created by dissolving a sample of C₃H₈O₃ in water and then bringing the volume up to 1.000 L.

So, being the molarity the number of moles of solute that are dissolved in a certain volume, the number of moles of glycerol can be calculated as:

number of moles of glycerol= 2.600×10⁻² M× 1 L

number of moles of glycerol= 2.600×10⁻² moles

Being the molar mass glycerol 92.09 [tex]\frac{g}{mole}[/tex], the mass of glycerol can be calculated as:

2.600×10⁻² moles×92.09 [tex]\frac{g}{mole}[/tex]= 2.39434 grams of glycerol

On the other side, the volume of water needed was 998.9 mL and the density of water at 20.0∘C is 0.9982 [tex]\frac{g}{mL}[/tex]. So, the mass of water needed can be calculated as:

998.9 mL×0.9982 [tex]\frac{g}{mL}[/tex]= 997.1 grams of water

Finally, the mass percentage of the solution can be calculated as:

[tex]mass percentage=\frac{mass of glycerol}{mass of glycerol + mass of water} x100[/tex]

Solving:

[tex]mass percentage=\frac{2.39434 grams}{2.39434 grams+ 997.1 grams} x100[/tex]

[tex]mass percentage=\frac{2.39434 grams}{999.49434 grams} x100[/tex]

mass percentaje= 0.2395 %

In summary, the concentration of the glycerol solution in percent by mass is 0.2395%.

B)  Parts per million (ppm) is a unit of measurement of concentration that measures the number of units of substance in each million units of the whole. In this case, the concentration measurement refers to mg of glycerol per L of solution.

Being the mass of glycerol 2.39434 grams equal to 2394.34 mg (1 g=1000mg), the concentration is:

[tex]concentration=\frac{2394.34 mg}{1L}[/tex]

concentration= 2394.34 ppm

In summary, the concentration of the glycerol solution is 2394.34 ppm.

Learn more about:

Answer:

1. Ka = 8.16x10⁻⁵

2. pH = 2.40

Explanation:

1. The dissociation of a weak acid in water occurs as follows:

HA ⇄ H⁺ + A⁻

Ka = [H⁺] [A⁻] / [HA]

As 2% of the 0.20M solution is dissociated:

[H⁺] = [A⁻] = 0.20M * 2% = 0.004M -As H⁺ and A⁻ comes from the same reaction, their concentrations are the same

[HA] = 0.20M * 98% = 0.196M

Ka = (0.004)² / (0.196M) = 8.16x10⁻⁵

2. pH = -log [H⁺] = -log [0.004M]

Answer:

...................................................................................

The mileage of the Toyota Prius hybrid in miles per gallon would be 49.39 miles/gallon.

A unit of measurement is a specified magnitude of a quantity that is established and used as a standard for measuring other quantities of the same kind. It is determined by convention or regulation.

As given in the problem a Toyota Prius hybrid gets 21 kilometers per liter in highway driving.

1 kilometers =  0.621 miles

21 kilometers = 21 ×  0.621 miles

                      =13.04 miles

1 liter =  0.264 gallon

The mileage in miles per gallon = 13.04 miles / 0.264 gallon

                                                     = 49.39 miles/gallon

Thus, the mileage of the Toyota Prius hybrid in miles per gallon would be 49.39 miles/gallon.

To learn more about the unit of measurement from here, refer to the link,

brainly.com/question/12629581

#SPJ2

WOW! I have the same question! Again lol.

A similarity is that both are at the same temperature and a difference is both are at different states of matter between the particles in liquid water at 100ºC and the particles in steam at 100ºC.

There are only 3 states in which matter is present in the universe that is solid, liquid and gas, and on the basis of molecular space, they are differentiated in their respective category.

The water present both at 100ºC first is in a liquid state where molecules of water are more close as compared to the molecules of the steam water but the temperature for both is the same.

Therefore, the similarity is that both are at the same temperature and a difference is both are at different states of matter between the particles in liquid water at 100ºC and the particles in steam at 100ºC.

Learn more about states of matter, here:

https://brainly.com/question/9402776

#SPJ2

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]Density = \frac{mass}{volume} [/tex]

From the question

mass = 50 g

volume = 30 mL

Substitute the values into the above formula and solve for the density

That's

[tex]Density = \frac{50}{30} \\ = \frac{5}{3} \\ = 1.66666...[/tex]

Wr have the final answer as

Hope this helps you

Answer:

The answer is "[tex]\bold{0.525\ \ atm^{-1}}[/tex]"

Explanation:

Given equation:

[tex]2SO_2(g) + O_2(g) \leftrightharpoons 2SO_3(g)[/tex]

Given value:

[tex]\Delta rH =-198.2 \ \ \frac{KJ}{mol}[/tex]

[tex]Kp=1100 \ K[/tex]

[tex]\Delta x = 2-(2+1)\\\\[/tex]

     [tex]= 2-(2+1)\\\\= 2-(3)\\\\= -1[/tex]

[tex]\left\begin{array}{cccc}I\ (atm)&1&0.5&0\\C\ (atm)&2x&-x&2x\\E\ (atm) &1-2x&0.5-x&2x\end{array}\right[/tex]

calculating the total pressure on equilibrium=  [tex](1-2x)+(0.5-x)+2x \ atm\\\\[/tex]

                                                                         [tex]= 1-2x+0.5-x+2x\\\\= 1+0.5-x\\\\=1.5-x\\[/tex]

[tex]\therefore \\\\\to 1.50-x= 1.35 \\\\\to 1.50-1.35= x\\\\\to 0.15= x\\\\ \to x= 0.15\\\\[/tex]

calculating the pressure in  [tex]So_2[/tex]:

[tex]= (1-2 \times 0.15)[/tex]

[tex]= 1-0.30 \\\\ =0.70 \ atm[/tex]

calculating the pressure in  [tex]O_2[/tex]:

[tex]= (0.5- 0.15)\\\\= 0.35 \ atm \\[/tex]

calculating the pressure in  [tex]So_3[/tex]:

[tex]= (2 \times 0.15)\\\\= (.30) \ atm \\\\[/tex]

Calculating the Kp at 1100 K:

[tex]= \frac{(Pressure(So_3))^2}{(Pressure(So_2))^2 \times Pressure(O_2)}\\\\= \frac{0.30^2}{0.70^2 \times 0.35}\\\\= \frac{0.30 \times 0.30 }{0.70\times 0.70 \times 0.35}\\\\= \frac{0.09 }{0.49\times 0.35} \\\\= \frac{0.09 }{0.1715} \\\\= 0.5247 \ \ or \ \ 0.525 \ \ atm^{-1} \\\\[/tex]

Answer:

Endothermic

Explanation:

Storing sugar for later use is an example of an endothermic reaction because that energy is being absorbed.