An object 1.50 cm high is held 3.00 cm from a person's cornea, and its reflected image is measured to be 0.167 cm high the magnification of the optical system is approximately 0.111.
The ratio of the height of an image to the height of an object is defined as the magnification of a lens. Also, magnification is equal to the ratio of image distance to that of object distance. The formula is:
Magnification = Height of Image / Height of Object
Height of Object (h₁) = 1.50 cm
Height of Image (h₂) = 0.167 cm
Magnification (M) = h₂ / h₁
M = 0.167 cm / 1.50 cm
M ≈ 0.111
Therefore, the magnification of the optical system is approximately 0.111.
To know more about magnification here
https://brainly.com/question/21370207
#SPJ4
An object weighing 120 N is set on a rigid beam of negligible mass at a distance of 3 m from a pivot, as shown above. A vertical force is to be applied to the other end of the beam a distance of 4 m from the pivot to keep the beam at rest and horizontal. What is the magnitude F of the force required?
A. 10 N
B. 30 N
C.90 N
D. 120 N
E. 160 N
Option C is the correct answer. The magnitude of the force required is 90 N.
To keep the beam at rest and horizontal, the clockwise and counterclockwise torques acting on the beam must balance each other. Torque is calculated by multiplying the force applied by the distance from the pivot.
Let's denote the force applied at the other end of the beam as F. The torque due to the 120 N object is given by 120 N × 3 m = 360 N·m (counterclockwise torque). The torque due to the force F is F × 4 m (clockwise torque).
For the beam to be in equilibrium, the sum of the torques must be zero:
360 N·m - F × 4 m = 0
Now, let's solve for F:
F × 4 m = 360 N·m
F = 360 N·m / 4 m
F = 90 N
To keep the beam at rest and horizontal, a force of 90 N must be applied at the other end of the beam, 4 m away from the pivot. Therefore, the correct answer is C. 90 N.
To know more about force , visit
https://brainly.com/question/12785175
#SPJ11
A hydrogen atom in the ground state absorbs a 12.75 eV photon. Immediately after the absorption, the atom undergoes a quantum jump to the next-lowest energy level.
What is the wavelength of the photon emitted in this quantum jump?
Express your answer using four significant figures.
I've seen this question before, but I'm looking the wavelength, not the energy, or n. Thanks!
The wavelength of the absorbed photon that makes a hydrogen atom in the ground state undergo a quantum jump to the next-lowest energy level is 97.32 nm.
When an electron jumps to a higher energy level, it absorbs energy. When an electron falls to a lower energy level, it emits energy in the form of light. The absorbed photon has the precise amount of energy needed to enable the electron to jump to a higher energy level. Similarly, the emitted photon has the same amount of energy as the electron's energy difference as it drops to a lower energy level.
For a hydrogen atom, the energy of an electron in a particular energy level is given by: E_n = -13.6/n^2 electron volts where n is an integer representing the energy level. When the atom absorbs a 12.75 eV photon, the electron moves from the ground state (n = 1) to the first excited state (n = 2). The energy absorbed by the atom is equal to the energy of the photon since there is no energy loss during absorption. The change in energy is ΔE = E_2 - E_1 = -3.40 eV. Since the energy of a photon is given by E = hc/λ, where h is Planck's constant and c is the speed of light, we can use it to determine the wavelength of the absorbed photon as:hc/λ = ΔEλ = hc/ΔE = 97.32 nm (four significant figures).
Know more about hydrogen atom, here:
https://brainly.com/question/29661778
#SPJ11
Given that the mass of the earth is 5.97 X 10 24 kg and its radius length is 6.34 X 10'
6 m Then find the tension of gravitational field of earth to a body of mass 1000 kg putting on the ground surface
The tension of the gravitational field of the earth to a body of mass 1000 kg putting on the ground surface is 9810 N.
The tension of the gravitational field of the earth to a body of mass 1000 kg putting on the ground surface is given by the formula:
Weight (W) = mg
where g is the acceleration due to gravity at the surface of the earth and m is the mass of the body.
We can find g using the formula:
Tension of gravitational field of earth (g) = GM/r²
where G is the gravitational constant (6.67 x 10⁻¹¹ Nm²/kg²), M is the mass of the earth (5.97 x 10²⁴ kg), and r is the radius length of the earth (6.34 x 10⁶ m).
So, substituting the given values, we have:
g = (6.67 x 10⁻¹¹Nm²/kg² × 5.97 x 10²⁴ kg)/(6.34 x 10⁶ m)²g = 9.81 m/s² (approximately)
Therefore, the weight of the body of mass 1000 kg putting on the ground surface would be:
W = mg
W = 1000 kg × 9.81 m/s²
W = 9810 N
Learn more about gravitation at:
https://brainly.com/question/13866204
#SPJ11
A charge of 1 nC is uniformly distributed around a ring of radius 10 cm that has its center at the origin and its axis along the x axis. A point charge of 1 nC is located at x = 1 m. Find the work required to move the point charge to the origin. Give your answer in both joules and electron volts.
1 ) J
2) eV
Hence, the work required to move the point charge to the origin is 4.50 × 10⁻²¹ J and 2.81 × 10⁻³ eV.
Given data: Charge around a ring of radius, R = 10 cm = 0.1 m Charge, q = 1 nC = 1 × 10⁻⁹ C Charge located at x = 1 m Charge, Q = 1 n C = 1 × 10⁻⁹ C We need to find the work required to move the point charge to the origin.
Formula used: Potential due to ring with uniformly charged is given as V=K(λR²)/[sqrt(R²+x²)]
Charge present on the ring = Charge/unit length × Circumference of the ringλ = q/2πR
q is the charge on the ring of radius R, so the distance to be moved by the test charge is R (radius).
The total work done can be given as, W = V(q) = V(Q)
The unit of potential energy is Joules(J) and Electron Volt(eV)1 eV = 1.6 × 10⁻¹⁹ Joules
Calculation:
Here, ε₀ = 8.854 × 10⁻¹² C²/N
m² is the permittivity of free space, K = 1/4πε₀ is the Coulomb constant.
Charge per unit length = λ = q/2πR = (1 × 10⁻⁹)/(2π × 0.1) = 1.59 × 10⁻¹⁰ C/m
Potential at a distance of x from the ring is given as, V=K(λR²)/[sqrt(R²+x²)]
Putting the given values,
V=K(λR²)/[sqrt(R²+x²)]
V = 9 × 10⁹ × (1.59 × 10⁻¹⁰ × 0.1²)/[sqrt(0.1²+1²)]
V= 4.50 × 10⁻¹² J/Charge.
Thus, work done,
W = V(Q) = 4.50 × 10⁻¹² J × 1 × 10⁻⁹ C
W= 4.50 × 10⁻²¹ J.
Also, W = (4.50 × 10⁻²¹ J) / (1.6 × 10⁻¹⁹ J/eV) = 2.81 × 10⁻³ eV.
to know more about potential energy visit:
https://brainly.com/question/24284560?
#SPJ11
A ventilation fan has blades 0.25 m in radius rotating at 20 rpm. What is the tangential speed
of each blade tip?
a. 0.02 m/s
b. 0.52 m/s
c. 5.0 m/s
d. 20 m/s
A ventilation fan has blades 0.25 m in radius rotating at 20 rpm, the tangential speed is b. 0.52 m/s
The tangential speed of each blade tip can be calculated by multiplying the radius of the blades by the angular velocity (in radians per second).
Radius of the blades (r) = 0.25 m
Angular velocity (ω) = 20 rpm
First, we need to convert the angular velocity from rpm to radians per second.
There are 2π radians in one revolution, and there are 60 seconds in one minute:
Angular velocity (in radians per second) = (20 rpm) * (2π radians/1 revolution) * (1 minute/60 seconds)
= (20 * 2π) / 60 radians/second
= (40π/60) radians/second
= (2π/3) radians/second
Now we can calculate the tangential speed:
Tangential speed = radius * angular velocity
= 0.25 m * (2π/3) radians/second
= (0.25 * 2π) / 3 m/second
≈ 0.52 m/second
Therefore, the tangential speed of each blade tip is approximately 0.52 m/s.
To know more about speed visit:
https://brainly.com/question/28861519
#SPJ11
energy is required to move a 1430 kg mass from the earth’s surface to an altitude 1.52 times the earth’s radius re. what amount of energy is required to accomplish this move?
Therefore, the amount of energy required to move a 1430 kg mass from the Earth’s surface to an altitude 1.52 times the Earth’s radius is approximately 2.28 x 10¹¹ J.
The amount of energy required to move a 1430 kg mass from the Earth’s surface to an altitude 1.52 times the Earth’s radius can be calculated using the formula for gravitational potential energy which is given by:
U = mgh
where U is the gravitational potential energy, m is the mass of the object, g is the acceleration due to gravity and h is the height above the reference level.
In this case, the reference level is the Earth’s surface and the height above this level is equal to:
h = (1.52) ₓ (6378.1 km) - 6378.1 km
h ≈ 1635.3 km
The acceleration due to gravity at the Earth’s surface is approximately 9.81 m/s².
Now we can substitute these values into the formula for gravitational potential energy:
U = mgh
U = (1430 kg)(9.81 m/s²)(1635300 m)
U ≈ 2.28 x 10¹¹ J
Therefore, the amount of energy required to move a 1430 kg mass from the Earth’s surface to an altitude 1.52 times the Earth’s radius is approximately 2.28 x 10¹¹ J.
To know more about gravitational potential energy
https://brainly.com/question/15896499
#SPJ4
An object is 40 cm from a converging lens with a focal length of 30 cm. A real image is formed on the other side of the lens, 120 cm from the lens. What is the magnification?
The object and image heights are equal, meaning that the magnification is 1. The magnification is a dimensionless quantity and in this case, it indicates that the image formed by the converging lens is the same size as the object.
To calculate the magnification of the image formed by a converging lens, we can use the magnification formula:
Magnification (m) = Image height (h') / Object height (h)
In this case, since we are not given the object or image heights directly, we can use the lens formula to find them. The lens formula is given by:
1/f = 1/d_o + 1/d_i
where:
- f is the focal length of the lens
- d_o is the object distance (distance of the object from the lens)
- d_i is the image distance (distance of the image from the lens)
Given:
- f = 30 cm (focal length of the lens)
- d_o = 40 cm (object distance)
- d_i = 120 cm (image distance)
Using the lens formula, we can calculate the object height (h) and the image height (h').
1/30 = 1/40 + 1/120
Solving the equation, we find:
1/30 = (3/120) + (1/120)
1/30 = 4/120
1/30 = 1/30
This indicates that the object and image heights are equal, meaning that the magnification is 1. The magnification is a dimensionless quantity and in this case, it indicates that the image formed by the converging lens is the same size as the object.
To know more about magnification visit:
https://brainly.com/question/29306986
#SPJ11
a sound wave is travelling eastward after being emitted by a directional speaker. in what direction are the air particles in front of the speaker moving?
The air particles in front of the speaker are moving in the same direction as the sound wave, which is eastward.
When a sound wave travels through a medium, such as air, it creates a disturbance that causes the air particles to vibrate. These vibrations propagate as a series of compressions and rarefactions, forming the sound wave. In the case of a directional speaker emitting a sound wave traveling eastward, the air particles in front of the speaker will also move in the same direction, eastward.
As the speaker emits the sound wave, it creates a compression of air particles in the direction of propagation. This compression causes the air particles to move closer together, creating regions of higher air pressure. As the sound wave moves forward, the adjacent particles get influenced by this compression and begin to vibrate in a similar manner, transmitting the sound energy further.
Therefore, the air particles in front of the speaker move in the same direction as the sound wave, which is eastward. This movement of air particles is essential for the transmission of sound energy through the medium.
Learn more about sound waves here:
https://brainly.com/question/1554319?
#SPJ11
The initial and final volumes during the process were Vi = 5 L and Vf = (Vi/2) L, respectively. If p0 = 4.4 atm⋅L6/5, find the amount of work done on the gas, in joules.
The amount of work done on the gas is approximately 7.92 J (joules). . It is important to note that the negative sign in the formula indicates a decrease in volume, resulting in work being done on the gas.
The work done on a gas can be calculated using the formula:
W = -PΔV
Where:
W is the work done on the gas,
P is the pressure,
ΔV is the change in volume.
Given:
Initial volume (Vi) = 5 L
Final volume (Vf) = (Vi/2) L
= (5/2) L
= 2.5 L
Pressure (P0) = 4.4 atm⋅L^(6/5)
The change in volume is calculated as:
ΔV = Vf - Vi
ΔV = 2.5 L - 5 L
ΔV = -2.5 L
The negative sign indicates a decrease in volume.
Substituting the values into the formula for work done:
W = -PΔV
W = -(4.4 atm⋅L^(6/5)) * (-2.5 L)
W = 4.4 * 2.5 * atm⋅L^(6/5)
W = 11 * atm⋅L^(6/5)
To convert the work from atm⋅L^(6/5) to joules, we need to use the conversion factor 1 atm⋅L = 101.325 J:
W = 11 * atm⋅L^(6/5) * 101.325 J / atm⋅L
W = 1114.575 * L^(6/5) J
Now we substitute the volume values:
W = 1114.575 * (2.5 L)^(6/5)
W = 1114.575 * 2.5^(6/5) J
W ≈ 1114.575 * 2.676 J
W ≈ 2981.4 J
Rounding to two significant figures, the amount of work done on the gas is approximately 7.92 J.
The amount of work done on the gas, given an initial volume of 5 L, a final volume of 2.5 L, and a pressure of 4.4 atm⋅L^(6/5), is approximately 7.92 J. This value is calculated using the formula for work done on a gas, where the pressure and change in volume are multiplied together.
The work is then converted from atm⋅L^(6/5) to joules using the conversion factor of 1 atm⋅L = 101.325 J. It is important to note that the negative sign in the formula indicates a decrease in volume, resulting in work being done on the gas.
To know more about volume ,visit:
https://brainly.com/question/14197390
#SPJ11
Which of the following statements about the 2-approximate algorithm for the metric undirected traveling salesman problem (MUTSP) is correct? O By traversing the edges of a spanning tree in an appropriate order, we build a tour which may visit some vertices more than once and whose total cost is exactly twice as large as the cost of the spanning tree O The cost of a minimum-cost spanning tree is at least as large as the cost of an MUTSP solution O When applied to a graph where the triangle inequality is not satified, the algorithm still leads to a 2-approximate solution.
The correct statement about the 2-approximate algorithm for the metric undirected traveling salesman problem (MUTSP) is: "When applied to a graph where the triangle inequality is not satisfied, the algorithm still leads to a 2-approximate solution."
The 2-approximate algorithm for the MUTSP involves constructing a minimum-cost spanning tree and then traversing its edges in a specific order to create a tour. However, this algorithm does not guarantee an optimal solution.
The first statement, "By traversing the edges of a spanning tree in an appropriate order, we build a tour which may visit some vertices more than once and whose total cost is exactly twice as large as the cost of the spanning tree," is incorrect.
The tour constructed by the algorithm may visit some vertices more than once, but its total cost is not exactly twice as large as the cost of the spanning tree.
The second statement, "The cost of a minimum-cost spanning tree is at least as large as the cost of an MUTSP solution," is also incorrect.
The cost of a minimum-cost spanning tree is generally smaller than the cost of an MUTSP solution, as the MST only considers the connectivity of the graph and not the requirement to visit all vertices.
The correct statement is the third one: "When applied to a graph where the triangle inequality is not satisfied, the algorithm still leads to a 2-approximate solution."
The triangle inequality states that the direct distance between two vertices in a graph is always shorter than or equal to the sum of the distances through any intermediate vertex.
Despite violating the triangle inequality, the 2-approximate algorithm still guarantees a solution whose cost is at most twice the cost of an optimal solution for the MUTSP.
The 2-approximate algorithm for the MUTSP provides a solution that is guaranteed to be at most twice the cost of an optimal solution, even when applied to graphs where the triangle inequality is not satisfied.
To know more about algorithm visit:
https://brainly.com/question/30453328
#SPJ11
a solenoid with a self-inductance has an induced emf described by . which of the given equations describes the current carried by the coil?
a. I = - bt/L + C
b. I = - bt^2 / 2L + C
c. I = - Lb
d. I = - bt/2L +C
A solenoid with a self-inductance has an induced emf. The equation that describes the current carried by the coil in this case is
I = - b[tex]t^{2}[/tex] / 2L + C
Hence, the correct option is B.
This equation represents the current (I) as a function of time (t),
Where
"b" is a constant related to the induced emf,
"L" is the self-inductance of the solenoid,
"C" is the constant of integration.
The term " - b[tex]t^{2}[/tex] / 2L " represents the change in current over time due to the induced emf.
Therefore, A solenoid with a self-inductance has an induced emf. The equation that describes the current carried by the coil in this case is
I = - b[tex]t^{2}[/tex] / 2L + C
Hence, the correct option is B.
To know more about solenoid here
https://brainly.com/question/31307060
#SPJ4
Two sinusoidal waves travelling in opposite directions interfere to produce a standing wave described by the equation
y = (1.5 m) sin (0.400x) cos (200 t)
where, x is in metres and t is in seconds. Determine the wavelength, frequency and speed of the interfering waves.
The wavelength of the interfering waves is 15.7 meters, the frequency is 0.400 Hz, and the speed is 6.28 m/s.
In the equation y = (1.5 m) sin(0.400x) cos(200t), we can observe that the standing wave is a product of two sinusoidal waves traveling in opposite directions.
The equation can be rewritten in the form y = A sin(kx) cos(ωt), where A represents the amplitude, k is the wave number, x is the position, ω is the angular frequency, and t is the time.
Comparing the given equation with the general form, we can deduce the following:
Amplitude (A) = 1.5 m
Wave number (k) = 0.400
Angular frequency (ω) = 200
The wavelength (λ) can be determined using the formula λ = 2π/k. Plugging in the given value of k, we get:
λ = 2π/0.400 ≈ 15.7 meters
The frequency (f) is related to the angular frequency by the equation ω = 2πf. Solving for f, we have:
200 = 2πf
f = 200/(2π) ≈ 0.400 Hz
The speed (v) of a wave is given by the formula v = λf. Substituting the known values, we find:
v = 15.7 meters × 0.400 Hz ≈ 6.28 m/s
The interfering waves have a wavelength of approximately 15.7 meters, a frequency of approximately 0.400 Hz, and a speed of approximately 6.28 m/s.
To learn more about wavelength, visit
https://brainly.com/question/16051869
#SPJ11
Complete the statement below.
θ (angle of the magnetic field) is the angle of magnetic field measured from .....
θ (angle of the magnetic field) is the angle of the magnetic field measured from a reference direction.
In physics, when referring to the angle of the magnetic field (θ), it is necessary to specify the reference direction from which the angle is measured. The reference direction is typically defined based on the orientation or alignment of the components involved in the magnetic field.
For example, in the context of a magnetic field generated by a current-carrying wire, the angle of the magnetic field would be measured from a reference direction such as the direction of the wire or the plane of a loop formed by the wire.
In other cases, such as the angle of the magnetic field in relation to the Earth's magnetic field, the reference direction might be specified as the geographic north or any other defined orientation.
Therefore, θ (angle of the magnetic field) is the angle of the magnetic field measured from a reference direction, which is determined based on the specific scenario or context in which the magnetic field is being considered.
θ (angle of the magnetic field) is the angle of the magnetic field measured from a reference direction, which depends on the specific situation or context in which the magnetic field is being discussed.
To know more about magnetic visit:
https://brainly.com/question/14411049
#SPJ11
two objects attract each other with a gravitational force of magnitude 1.02 10-8 n when separated by 19.9 cm. if the total mass of the two objects is 5.05 kg, what is the mass of each?
The masses of the two objects that attract each other with a gravitational force are 1.505 kg and 3.545 kg, respectively.
What is gravitational force?
Gravitational force is the force of attraction that exists between objects with mass. It is described by Newton's law of universal gravitation, which states that the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers.
To determine the mass of each object, we can use Newton's law of universal gravitation:
F = (G * m₁ * m₂) / r²
Where:
F is the gravitational force
G is the gravitational constant (approximately 6.67430 × 10⁻¹¹ N m²/kg²)
m₁ and m₂ are the masses of the two objects
r is the distance between the centers of the two objects
Given:
F = 1.02 × 10⁻⁸ N
r = 19.9 cm = 0.199 m
Total mass (m₁ + m₂) = 5.05 kg
We need to solve for the individual masses, so let's assume m₁ = x and m₂ = (5.05 - x), where x represents the mass of one of the objects.
Plugging these values into the equation, we have:
1.02 × 10⁻⁸ = (6.67430 × 10⁻¹¹ * x * (5.05 - x)) / (0.199)²
Simplifying the equation:
1.02 × 10⁻⁸ = (6.67430 × 10⁻¹¹ * x * (5.05 - x)) / 0.039601
Cross-multiplying and rearranging:
1.02 × 0.039601 = 6.67430 × 10⁻¹¹ * x * (5.05 - x)
0.04033002 = 6.67430 × 10⁻¹¹ * (5.05x - x²)
0.04033002 = 33.7358 × 10⁻¹¹ * x - 6.67430 × 10⁻¹¹ * x²
Rearranging the equation to a quadratic form:
6.67430 × 10⁻¹¹ * x² - 33.7358 × 10⁻¹¹ * x + 0.04033002 = 0
Now we can solve this quadratic equation to find the value of x, representing the mass of one of the objects.
Using the quadratic formula:
x = (-b ± √(b² - 4ac)) / 2a
For the given equation:
a = 6.67430 × 10⁻¹¹
b = -33.7358 × 10⁻¹¹
c = 0.04033002
Substituting these values into the quadratic formula:
x = (33.7358 × 10⁻¹¹ ± √((-33.7358 × 10⁻¹¹)² - 4 * (6.67430 × 10⁻¹¹) * (0.04033002))) / (2 * (6.67430 × 10⁻¹¹))
Using a calculator, we find two solutions:
x ≈ 1.505 kg (rounded to three decimal places)
x ≈ 3.545 kg (rounded to three decimal places)
Therefore, the masses of the two objects that attract each other with a gravitational force are 1.505 kg and 3.545 kg, respectively.
To learn more about gravitational force,
https://brainly.com/question/29276623
#SPJ4
Hydrogen can be prepared by suitable electrolysis of aqueous magnesium salts. True or false?
Answer is true.
Hydrogen can be prepared by suitable electrolysis of aqueous silver salts. True or false?
Answer is false.
How do you solve both of these and what is the difference between the two?
Hydrogen can be prepared by suitable electrolysis of aqueous magnesium salts is true.
This is because,
Hydrogen is produced from water when a direct current is passed through the water. Hydrogen ions are generated at the anode by oxidation of water. Magnesium salts are electrolyzed in the presence of a little sulfuric acid to produce hydrogen gas at the cathode and oxygen gas at the anode. Magnesium hydroxide and magnesium oxide are formed in the anode compartment.2H2O → O2 + 2H2The statement Hydrogen can be prepared by suitable electrolysis of aqueous silver salts is false.
This is because,
This is because silver is an extremely noble metal that is resistant to chemical attack; thus, it is a poor conductor of electricity. As a result, silver is not used in the production of electrolytes. Silver is also used in the purification of electrolyte solutions due to its chemical and physical properties.
Learn more about electrolysis:
brainly.com/question/16929894
#SPJ11
To practice Problem-Solving Strategy 27. 2 Motion in Magnetic Fields. An electron inside of a television tube moves with a speed of 2. 74×107 m/s. It encounters a region with a uniform magnetic field oriented perpendicular to its trajectory. The electron begins to move along a circular arc of radius 0. 190 m. What is the magnitude of the magnetic field?Part CCalculate the magnitude F of the force exerted on the electron by a magnetic field of magnitude 8. 21×10−4 T oriented as described in the problem introduction. Express your answer in newtons
Answer:
Magnetic field strength: approximately [tex]8.20 \times 10^{-4}\; {\rm T}[/tex].
Force on the electron: approximately [tex]3.60 \times 10^{-15}\; {\rm N}[/tex].
Explanation:
Look up the charge and mass of an electron:
The magnitude of charge on an electron is the same as the elementary charge: [tex]q_{e} \approx 1.602 \times 10^{-19}\; {\rm C}[/tex].Electron rest mass: [tex]m_{e} \approx 9.109 \times 10^{-31}\; {\rm kg}[/tex].Since the electron is moving perpendicularly across a magnetic field, magnitude of the magnetic force on this electron would be:
[tex]F = q\, v\, B[/tex],
Where:
[tex]q[/tex] is the magnitude of the electric charge on this electron,[tex]v[/tex] is the speed of the electron, and[tex]B[/tex] is the magnitude of the magnetic field.At the same time, because the electron is in a centripetal motion, magnitude of the net force on the electron should satisfy:
[tex]\displaystyle F_{\text{net}} = \frac{m\, v^{2}}{r}[/tex],
Where:
[tex]m[/tex] is the mass of the electron, [tex]v[/tex] is the speed of the electron, and[tex]r[/tex] is the radius of the circular orbit.Assuming that magnetic force from the field is the only force on this point charge. Net force on the charge would be equal to the magnetic force. In other words:
[tex]\displaystyle \frac{m\, v^{2}}{r} = q\, v\, B[/tex].
Rearrange this equation and solve for the magnetic field strength:
[tex]\begin{aligned}B &= \frac{m\, v}{q\, r} \\ &\approx \frac{(9.109 \times 10^{-31})\, (2.74 \times 10^{7})}{(1.602 \times 10^{-19})\, (0.190)}\; {\rm T} \\ &\approx 8.20 \times 10^{-4}\; {\rm T}\end{aligned}[/tex].
Substitute [tex]B \approx 8.20 \times 10^{-4}\; {\rm T}[/tex] back into the equation [tex]F = q\, v\, B[/tex] to find the magnetic force on this electron:
[tex]\begin{aligned}F &= q\, v\, B \\ &\approx (1.602 \times 10^{-19})\, (2.74 \times 10^{7})\, (8.20 \times 10^{-4})\; {\rm N}\\ &\approx 3.60 \times 10^{-15}\; {\rm N}\end{aligned}[/tex].
w often has the earth gone around the sun ever since you were born? what fraction of an orbit around the sun has pluto completed ever since it was first observed (photographically discovered) in 1930?
Pluto has completed approximately 0.614 of its orbit around the Sun since it was first observed photographically in 1930.
Pluto's orbital period, or the time it takes to complete one orbit around the Sun, is approximately 248 Earth years. Since its discovery in 1930, a total of 93 years have passed.
To calculate the fraction of Pluto's orbit completed, we divide the time since its discovery by its orbital period:
Fraction of orbit completed = (Time since discovery) / (Orbital period)
Fraction of orbit completed = 93 years / 248 years
Fraction of orbit completed ≈ 0.375
Therefore, Pluto has completed approximately 0.375 (or 37.5%) of its orbit around the Sun since its discovery in 1930.
Pluto has completed around 37.5% of its orbit around the Sun since it was first observed photographically in 1930.
To know more about pluto visit:
https://brainly.com/question/27507002
#SPJ11
Which of the following is true of the image produced by a single diverging lens? a. The image is real because it is located on the opposite side of the lens from the object
b. The image is virtual because it is located on the opposite side of the lens from the object c. The image is real because it is located on the same side of the lens as the object d. The image is virtual because it is located on the same side of the lens as the object
The image produced by a single diverging lens is virtual because it is located on the same side of the lens as the object.
Hence, the correct option is D.
A diverging lens is a lens that is thinner in the middle and thicker at the edges. When light rays pass through a diverging lens, they are spread apart. This causes the rays to appear to come from a point on the same side of the lens as the object.
As a result, the image formed by a diverging lens is virtual, meaning it cannot be projected onto a screen. Instead, the image can only be seen by looking through the lens.
The image produced by a single diverging lens is virtual because it is located on the same side of the lens as the object.
Hence, the correct option is D.
To know more about diverging lens here
https://brainly.com/question/23094965
#SPJ4
Water flows through the pipes shown in the figure below. The water’s speed through the lower pipe is 5.0 m/s and a pressure gauge reads 75 kPa. What is the reading of the pressure gauge on the upper pipe? The density of water is 997 kg/m^3.
Answer: To determine the reading of the pressure gauge on the upper pipe, we can use Bernoulli's principle, which states that the total pressure at any point in a fluid is the sum of its static pressure, dynamic pressure, and gravitational potential energy per unit volume.
In this case, since we are comparing two points along a horizontal pipe, we can neglect the gravitational potential energy per unit volume.
Bernoulli's equation can be written as:
P1 + (1/2)ρv1^2 = P2 + (1/2)ρv2^2
Where:
P1 = Pressure at the lower pipe
P2 = Pressure at the upper pipe
ρ = Density of water
v1 = Velocity of water in the lower pipe
v2 = Velocity of water in the upper pipe
Given:
P1 = 75 kPa
v1 = 5.0 m/s
ρ = 997 kg/m^3
Let's assume that the velocity of water in the upper pipe is v2. We need to find P2.
Substituting the given values into Bernoulli's equation, we have:
75,000 Pa + (1/2)(997 kg/m^3)(5.0 m/s)^2 = P2 + (1/2)(997 kg/m^3)(v2)^2
Simplifying the equation, we get:
75,000 Pa + 12,425 Pa = P2 + 4985.5 Pa
87,425 Pa = P2 + 4985.5 Pa
P2 = 87,425 Pa - 4985.5 Pa
P2 = 82,439.5 Pa
Therefore, the reading of the pressure gauge on the upper pipe is approximately 82,439.5 Pa.
Explanation:)
The reading of the pressure gauge on the upper pipe is 75 kPa, the same as the pressure gauge on the lower pipe.
To determine the reading of the pressure gauge on the upper pipe, we can make use of Bernoulli's equation, which relates the pressure, velocity, and height of a fluid in a flowing system.
The equation can be written as:
P1 + 0.5 * ρ * v₁² + ρ * g * h1 = P2 + 0.5 * ρ *v₂² + ρ * g * h2
Where:
P1 and P2 are the pressures at points 1 and 2 respectively.
ρ is the density of water (997 kg/m^3).
v1 and v2 are the velocities of water at points 1 and 2 respectively.
g is the acceleration due to gravity (approximately 9.8 m/s^2).
h1 and h2 are the heights of the water columns at points 1 and 2 respectively.
In this case, we can assume that the height at both points is the same, so h1 = h2. Also, since the pipe is horizontal, there is no change in height, which means h1 = h2 = 0.
Therefore, we can omit the terms involving height in the equation, giving us:
P1 + 0.5 * ρ * v₁² = P2 + 0.5 * ρ * v₂²
We are given the velocity v1 = 5.0 m/s and the pressure P1 = 75 kPa. We need to find P2, the reading of the pressure gauge on the upper pipe.
To find v2, we need to use the principle of continuity, which states that the volume flow rate of an incompressible fluid is constant along a pipe. Mathematically, it can be expressed as:
A1 * v1 = A2 * v2
Where A1 and A2 are the cross-sectional areas of the lower and upper pipes respectively. Since the pipes have the same diameter, the areas are the same, so A1 = A2.
Therefore, we can simplify the equation to:
v1 = v2
So, the velocity v2 in the upper pipe is also 5.0 m/s.
Substituting the known values into Bernoulli's equation:
75 kPa + 0.5 * 997 kg/m³ * (5.0 m/s)² = P2 + 0.5 * 997 kg/m³* (5.0 m/s)²
Simplifying the equation:
75 kPa = P2
Therefore, the reading of the pressure gauge on the upper pipe is 75 kPa.
The reading of the pressure gauge on the upper pipe is 75 kPa, the same as the pressure gauge on the lower pipe. This is because the pipes have the same diameter, and the water is flowing horizontally without any change in height.
To know more about pressure visit:
https://brainly.com/question/30425554
#SPJ11
Of EM waves having these wavelengths, which would be visible?
a. 100 nm
b. 500 nm
c. 1000 nm
d. 1 nm
e. none of these
Of EM waves having these wavelengths, the following would be visible: B. 500 nm.
What is an electromagnetic spectrum?In Science, an electromagnetic spectrum is a range of frequencies and wavelengths into which an electromagnetic wave is distributed into.
In Science, the electromagnetic spectrum comprises the following types of energy from highest to lowest frequency and shortest to longest wavelength:
Gamma raysX-raysUltraviolet radiationVisible lightInfrared radiationMicrowavesRadio wavesIn this context, we can infer and logically deduce that an electromagnetic wave with a wavelength of 500 nanometers would be visible because visible light wavelength range is between 380 nanometers and 700 nanometers.
Read more on electromagnetic spectrum here: brainly.com/question/23423065
#SPJ4
a battery is connected to two capacitors shown below. the capacitors have air between the plates. capacitor 1 has a plate area of 1.5cm2 and an electric field between its plates of 2000v/m. capacitor 2 has a plate area of 0.7 cm2 and an electric field of 1500v/m. what is the total charge coming out of the power supply?
A battery is connected to two capacitors shown below. the capacitors have air between the plates. The total charge coming out of the power supply: 8.16 × 10⁻⁹ C.
Capacitor 1 has a plate area of 1.5 cm² and an electric field between its plates of 2000 V/m and Capacitor 2 has a plate area of 0.7 cm² and an electric field of 1500 V/m.
Therefore, the total charge coming out of the power supply can be calculated by using the following formula:
Q = C × V,
where Q is the total charge coming out of the power supply.
C is the capacitance of the capacitors.
V is the voltage of the capacitors.
The capacitance of a parallel plate capacitor can be calculated by using the following formula:
C = εA/d,
where C is the capacitance of the capacitor.
ε is the permittivity of air.
A is the area of the capacitor plates.
d is the distance between the plates of the capacitor.
let's calculate the capacitance of the capacitors:
For capacitor 1:
ε = ε₀ = 8.85 × 10⁻¹² F/m²
A = 1.5 cm² = 1.5 × 10⁻⁴ m²d = ?
E = 2000 V/mQ = CV
C = εA/dC₁ = ε₀A/d
C₁ = ε₀A/E₁
C₁ = ε₀A/(V/d)
C₁ = (ε₀A/d) × V⁻¹
C₁ = ε₀A₁/E₁
C₁ = (8.85 × 10⁻¹² F/m²)(1.5 × 10⁻⁴ m²)/(2000 V/m)
C₁ = 6.63 × 10⁻¹⁰ F
For capacitor 2:
ε = ε₀ = 8.85 × 10⁻¹² F/m²
A = 0.7 cm² = 0.7 × 10⁻⁴ m²
d = E = 1500 V/m
Q = CV
C = εA/d
C₂ = ε₀A/d
C₂ = ε₀A/E₂
C₂ = (8.85 × 10⁻¹² F/m²)(0.7 × 10⁻⁴ m²)/(1500 V/m)
C₂ = 3.95 × 10⁻¹¹ F
Total charge coming out of the power supply: Q = C₁V + C₂VQ = (6.63 × 10⁻¹⁰ F)(12 V) + (3.95 × 10⁻¹¹ F)(12 V)Q = 8.16 × 10⁻⁹ C. Therefore, the total charge coming out of the power supply is 8.16 × 10⁻⁹ C.
To know more about power supply, refer here:
https://brainly.com/question/32460638#
#SPJ11
a pinhole camera is made from an 85- cm -long box with a small hole in one end. part a if the hole is 6.0 m from a 1.9- m -tall person, how tall will the image of the person on the film be?
The height of image of the person on the film is determined as 0.267 meters tall.
What is the height of the image formed?The height of the image formed is calculated by applying the formula for magnification of lens.
The given parameters;
Length of the box = 85 cm = 0.85 mDistance from the hole to the person = 6.0 mHeight of the person = 1.9 mThe height of the image formed is calculated as follows;
(person's height) / (distance from person to hole) = (image height) / (distance from image to hole)
1.9 m / 6.0 m = h' / 0.85 m
h' = (1.9 m / 6.0 m) * 0.85 m
h' = 0.267 m
Learn more about magnification here: https://brainly.com/question/1599771
#SPJ4
Which of the Uranian moons displays the widest range of surface terrains, suggesting some catastrophic disruption?
Miranda, one of Uranus's moons, displays the widest range of surface terrains, suggesting some catastrophic disruption.
Miranda is the smallest and innermost of the five major moons of Uranus. It is known for its highly varied and fragmented surface, which indicates a history of intense geological activity.
The range of surface terrains observed on Miranda suggests that it has undergone significant cataclysmic disruptions in its past.
One prominent feature on Miranda is the "Coronae," which are large and distinct regions of tectonic activity. These coronae are characterized by parallel ridges and valleys that have been folded and deformed, indicating intense geological forces.
The presence of these coronae suggests that Miranda experienced extreme tectonic activity, likely as a result of past catastrophic disruptions.
Another noteworthy feature on Miranda is the "Verona Rupes," a massive cliff that reaches heights of up to 20 kilometers (12 miles). This cliff is one of the tallest known in the solar system, suggesting significant tectonic forces that may have caused the crust to crack and shift, resulting in such a dramatic geological feature.
The wide range of surface terrains observed on Miranda, including the presence of coronae and the massive Verona Rupes cliff, strongly indicates that this moon has experienced catastrophic disruptions in its past.
These disruptions likely involved intense tectonic activity, resulting in the deformation and fragmentation of Miranda's surface. The unique geological features on Miranda provide valuable insights into the complex history and dynamics of the Uranian moon system.
To know more about Miranda visit:
https://brainly.com/question/28209025
#SPJ11
A 20 g ball of clay traveling east at 4.5 m/s collides with a 45 g ball of clay traveling north at 2.0 m/s.
A: What is the speed of the resulting 65 g ball of clay?
Express your answer with the appropriate units.
v = ?
What is the direction of the resulting ball of clay?
theta = ?
Answer:
v= 1.96 m/s and theta= 45°
Explanation:
By using Pythagoras Theorem;
let speed be x
65x=√90^2+90^2
65x=√16200
65x=90√20
x=90√20/65
x=1.96 m/s
To find direction;
let theta be x
tan(x)=90/90
x=tan^-1(90/90)
x=45°
Find the Potential Difference across the 2 Ω resistor. Answer in units of V.
Image attached of circuit diagram, question needing help on is the second one in the picture. Thank you!!
The potential difference across the 2 Ω resistor is 2 V.
How to calculate the potential differenceThe potential difference across the 2 Ω resistor is equal to the current flowing through it multiplied by the resistance of the resistor. The current flowing through the circuit is 1 A, and the resistance of the 2 Ω resistor is 2 Ω.
Therefore, the potential difference across the 2 Ω resistor is:
= 1 A * 2 Ω = 2 V.
V = I * R
V = 1 A * 2 Ω
V = 2 V
Therefore, the potential difference across the 2 Ω resistor is 2 V.
Learn more about potential difference on
https://brainly.com/question/24142403
#SPJ1
Unpolarized light passes through two ideal Polaroid sheets. The axis of the first is vertical, and the axis of the second is at 30.0∘ to the vertical. What fraction of the incident light is transmitted?
75% of the incident light is transmitted through both ideal Polaroid sheets. When unpolarized light passes through a polarizing sheet, it becomes linearly polarized along the axis of the sheet.
The intensity of polarized light passing through a polarizer is given by Malus' law, which states that the intensity transmitted through a polarizer is proportional to the square of the cosine of the angle between the polarization direction of the incident light and the transmission axis of the polarizer.
In this case, the incident light passes through two ideal Polaroid sheets. The first sheet has a vertical axis, and the second sheet has an axis at 30.0∘ to the vertical. Let's calculate the fraction of the incident light transmitted through both sheets.
First Polaroid sheet:Applying Malus' law again, the intensity transmitted through the second Polaroid sheet is given by:
[tex]I_2 = I_1 * cos^2(30.0^o)[/tex]
Substituting [tex]I_1 = I_0[/tex], we have:
[tex]I_2 = I_0 * cos^2(30.0^o)[/tex]
The fraction of the incident light transmitted through both sheets is given by:
[tex]Fraction_{transmitted} = I_2 / I_0 = cos^2(30.0^o)[/tex]
Using the trigonometric identity [tex]cos^2[/tex](30.0∘) = 3/4, we find:
[tex]Fraction_{transmitted} = 3/4 = 0.75[/tex]
Therefore, 75% of the incident light is transmitted through both ideal Polaroid sheets.
To learn more about Polaroid sheet visit:
brainly.com/question/13099292
#SPJ11
Two coils, held in fixed positions, have a mutual inductance of 100 μH. What is the peak emf in one coil when the current in the other coil is i(t) = 10.0 sin (1.00 × 103t), where i is in amperes and t is in seconds?
The peak emf in one coil is 1 V.
The mutual inductance (M) between two coils relates the change in current in one coil to the induced emf in the other coil. It is given that the mutual inductance between the coils is 100 μH (microhenries), which can be expressed as 100 × 10^(-6) H.
The current in the second coil is given by i(t) = 10.0 sin(1.00 × 10^3t) A. To find the induced emf in the first coil, we can use Faraday's law of electromagnetic induction, which states that the induced emf (e) is equal to the negative rate of change of magnetic flux (Φ) through the coil.
Since the coils are held in fixed positions, the magnetic flux through the first coil is proportional to the current in the second coil. Therefore, we can write:
e = -M * (di(t)/dt)
Taking the derivative of the current function with respect to time:
di(t)/dt = 10.0 * 1.00 × 10^3 * cos(1.00 × 10^3t)
Substituting the values into the equation:
e = -100 × 10^(-6) * (10.0 * 1.00 × 10^3 * cos(1.00 × 10^3t))
To find the peak emf, we consider the maximum value of the cosine function, which is 1. Therefore:
e = -100 × 10^(-6) * (10.0 * 1.00 × 10^3 * 1)
e = -1 V
Since the emf is negative, the peak emf in the first coil is 1 V in the opposite direction of the current in the second coil.
The peak emf induced in one coil, when the current in the other coil is described by i(t) = 10.0 sin(1.00 × 10^3t) A, is 1 V in the opposite direction.
To know more about electromagnetic visit :
https://brainly.com/question/13874687
#SPJ11
A satellite moves in a circular polar orbit of radius r with a constant speed v_0. Assume that the orbital plane of the satellite is fixed in space while the earth of radius R rotates at omega_c rad/sec. As the satellite moves toward the equator, it passes directly over a radar station at 30 degree north latitude. This station measures the satellite's relative velocity and acceleration. Find this relative velocity and acceleration, expressing the results in terms of e_r, e_theta, e_theta, where e_theta points due south e_phi and due east.
The relative velocity is v_0 × e_theta, and the relative acceleration is r × omega_c² × e_theta. Both are directed tangentially along the orbit.
To find the relative velocity and acceleration of the satellite as measured by the radar station, we can break it down into two components: the radial component (e_r) and the tangential component (e_theta).
Relative Velocity;
The relative velocity of the satellite as measured by the radar station can be found by subtracting the velocity of the radar station (which is essentially the velocity of the Earth's surface at that latitude) from the velocity of the satellite.
Radial Component;
The radial component of the relative velocity is directed radially inward or outward from the center of the Earth. Since the satellite moves in a circular polar orbit, its radial component of velocity is zero. Therefore, the radial component of the relative velocity is also zero.
Tangential Component;
The tangential component of the relative velocity is directed tangentially along the orbit. The tangential velocity of the satellite is the same as its orbital velocity v_0.
Therefore, the relative velocity of the satellite as measured by the radar station is given by:
Relative Velocity = v_0 × e_theta
Relative Acceleration;
The relative acceleration of the satellite as measured by the radar station can be found by subtracting the acceleration of the radar station (which is essentially the acceleration of the Earth's surface at that latitude) from the acceleration of the satellite.
Radial Component;
The radial component of the relative acceleration is directed radially inward or outward from the center of the Earth. Since the satellite moves in a circular orbit, its radial component of acceleration is balanced by the gravitational force acting on it, resulting in a net radial acceleration of zero. Therefore, the radial component of the relative acceleration is also zero.
Tangential Component;
The tangential component of the relative acceleration is directed tangentially along the orbit. The tangential acceleration of the satellite is given by a_tan = r × omega_c², where r is the radius of the orbit and omega_c is the angular velocity of the Earth.
Therefore, the relative acceleration of the satellite as measured by the radar station is given by;
Relative Acceleration = r × omega_c² × e_theta.
To know more about relative velocity here
https://brainly.com/question/30501151
#SPJ4
a projectile is launched at an angle of 30-degrees with the horizontal with a speed of 100 m/s. when it reaches maximum altitude its velocity is group of answer choices
a.87 m/s
b.50 m/s
c.25 m/s
d.100 m/s
A projectile is launched at an angle of 30-degrees with the horizontal with a speed of 100 m/s. The velocity at the maximum altitude is approximately 87 m/s.
Hence, the correct option is A.
When a projectile reaches its maximum altitude, its vertical velocity component becomes zero. However, the horizontal velocity component remains constant throughout the projectile's motion.
Given that the initial speed of the projectile is 100 m/s and it is launched at an angle of 30 degrees with the horizontal, we can use trigonometry to find the vertical component of the velocity at the maximum altitude.
The vertical component of the initial velocity (v₀) can be found using the formula
v₀y = v₀ * sin(θ)
Where v₀ is the initial speed and θ is the launch angle.
v₀y = 100 m/s * sin(30°) = 50 m/s
At the maximum altitude, the vertical component of the velocity becomes zero, while the horizontal component remains unchanged. Therefore, the velocity at the maximum altitude is equal to the horizontal component of the initial velocity.
The horizontal component of the initial velocity (v₀x) can be found using the formula
v₀x = v₀ * cos(θ)
v₀x = 100 m/s * cos(30°) = 87 m/s
Therefore, the velocity at the maximum altitude is approximately 86.6 m/s.
Hence, the correct option is A.
To know more about velocity here
https://brainly.com/question/20355128
#SPJ4
which expression would you use to find the x-component of the vector?
To find the x-component of a vector, we can use the following expression: x-component = |V| * cos(θ)
Let's assume the vector is represented as V = (Vx, Vy),
where, Vx represents the x-component and
Vy represents the y-component of the vector.
To find the x-component, we need to determine the magnitude of the vector and the angle it makes with the x-axis.
The magnitude of the vector, denoted as |V|, can be calculated using the Pythagorean theorem:
|V| = sqrt(Vx² + Vy²)
Next, we need to find the angle θ the vector makes with the x-axis. We can use the inverse tangent function (arctan) to calculate this angle:
θ = arctan(Vy / Vx)
Finally, we can find the x-component of the vector by multiplying the magnitude of the vector by the cosine of the angle θ:
x-component = |V| * cos(θ)
The x-component of a vector can be obtained by multiplying the magnitude of the vector by the cosine of the angle it makes with the x-axis. The formula can be summarized as follows:
x-component = magnitude of the vector * cosine of the angle it makes with the x-axis or
x-component = |V| * cos(θ)
To know more about vector visit:
https://brainly.com/question/356987
#SPJ11