Chris makes $25 an hour and is getting a 10% raise. What is her new
earning per hour?

The properties of the Fourier transform stated in (1) and (2) are incorrect.

The properties of the Fourier transform stated in (1) and (2) are incorrect.

Let's examine each property:

(1) (Fu)(E) = 27 (F-\u) (-):

The expression on the left side, (Fu)(E), represents the Fourier transform of a function u evaluated at frequency E.

However, the expression on the right side, 27 (F-\u) (-), is not a valid representation of the Fourier transform.

The notation (F-\u) (-) is unclear and does not align with the standard conventions of the Fourier transform.

(2) (F(t,0))(E) - (FU)(8 + a):

Similarly, the expression on the left side, (F(t,0))(E), suggests the Fourier transform of a function F evaluated at time t and frequency E.

However, the subtraction of (FU)(8 + a) is not a well-defined operation in the context of the Fourier transform. The relationship between F(t,0) and FU is not clear, and the addition of 8 + a lacks proper justification.

Therefore, both properties (1) and (2) provided for the Fourier transform are inaccurate.

Learn more about Fourier transform

brainly.com/question/1542972

#SPJ11

Answer:

6/12,  2/4,

Step-by-step explanation:

6/12 because half of 12 is 6.

2/4 because half of 4 is 2.

Both can equal 1/2.

Answer

3.7 or approximately 4 gallons

Step-by-step explanation:

7x2=14 total liters.

3.78 liters=1 gallon

14/3.78= 3.7 gallons

Answer:

3

Step-by-step explanation:

-(-5) -2

5 - 2

3

Answer:

-7

Step-by-step explanation:

Hope this helps

The value of ∭E (x² + y²) dv over the region E between the given spheres.

To evaluate the integral ∭E (x² + y²) dv using spherical coordinates, we first need to express the volume element dv in terms of spherical coordinates.

In spherical coordinates, the volume element is given by dv = r² sin(φ) dr dφ dθ, where r represents the radial distance, φ represents the polar angle, and θ represents the azimuthal angle.

Since we are integrating over the region E between the spheres x² + y² + z² = 9 and x² + y² + z² = 16, the limits of integration for r, φ, and θ will be as follows:

r: from the lower sphere to the upper sphere, which corresponds to r = 3 to r = 4

φ: from 0 to π (since we are considering the entire range of polar angle)

θ: from 0 to 2π (since we are considering the entire range of azimuthal angle)

Now, let's substitute these values and evaluate the integral:

∭E (x² + y²) dv = ∭E (r² sin(φ) cos²(θ) + r² sin(φ) sin²(θ)) dr dφ dθ

Integrating over θ from 0 to 2π, and integrating over φ from 0 to π, we have:

∭E (x² + y²) dv = ∫[0,2π] ∫[0,π] ∫[3,4] (r² sin(φ) cos²(θ) + r² sin(φ) sin²(θ)) dr dφ dθ

Now, we can evaluate the integral by performing the integration step by step, starting from the innermost integral.

After evaluating the integral, the final result will give us the value of ∭E (x² + y²) dv over the region E between the given spheres.

Learn more about spheres here

https://brainly.com/question/31242763

#SPJ11

The 90% confidence lower bound for u is:  u>4.066

To find the confidence intervals for the true shear strength u, we will use the sample mean, sample standard deviation, and the given sample size.

a. Two-Sided 90% Confidence Interval for u:

The formula for the confidence interval is given by:

x' = z × s/√n  < u <  x' +z × s/√n

Where:

x' is the sample mean (given as 4.25)

s is the sample standard deviation (given as 1.30)

n is the sample size (given as 78)

z is the z-score corresponding to the desired confidence level (90% confidence level has z-score of 1.645)

Plugging in the values and simplifying:

4.25 - 0.184 < u < 4.25 + 0.184

Therefore, the 2-sided 90% confidence interval for u is:

4.066 < u < 4.434

b. 90% Confidence Lower Bound for u:

The formula for the confidence interval lower bound is given by:

x' - z × s/√n < u

Plugging and simplifying the values we get:

Simplifying the expression:

4.25 - 0.184 < u

Therefore, the 90% confidence lower bound for u is:

u > 4.066

To know more about confidence lower bound follow the link:

https://brainly.com/question/17162446

#SPJ4

Answer:

150*3= 450 miles

Hope this helped :)

Answer:

5x+3=23

Step-by-step explanation:

Answer:

$4 per smoothie

Step-by-step explanation:

5x+4=23

By plugging in the values of x and y obtained from the linear programming solution, we can calculate the unused amounts of sugar, flour, and time.

To determine the number of grape and apple pies that will maximize revenues, we can use linear programming. Let's set up the problem:

Let x be the number of apple pies produced.

Let y be the number of grape pies produced.

Objective function:

Maximize Revenue = 4.50x + 3.60y

Constraints:

1.5x + 2y ≤ 2100 (sugar constraint)

3x + 3y ≤ 3000 (flour constraint)

6x + 3y ≤ 60*60 (time constraint, converting hours to minutes)

The problem can be solved using linear programming software or a graphing calculator. The optimal values for x and y will provide the number of apple and grape pies that maximize revenue.

Regarding part b, to determine the amounts of sugar, flour, and time that will be unused, we can compare the amount used with the amount available.

Unused Sugar = 2100 - (1.5x + 2y)

Unused Flour = 3000 - (3x + 3y)

Unused Time = (60*60) - (6x + 3y)

By plugging in the values of x and y obtained from the linear programming solution, we can calculate the unused amounts of sugar, flour, and time. Remember to round the final answers to the nearest whole number.

For more questions on values

https://brainly.com/question/843074

#SPJ8

Answer:

0.42846931021

Step-by-step explanation:

The function h(z) = 1 4iz + 2 defined on the extended complex plane,

(a) The function h(z) = 1/(4iz + 2) can be expressed as a composition of the linear function g(z) and reciprocal function f(z).

(b) The image of the line y = 2 under w = h(z) is the point z = -3/(8i).

(c) The image of the circle |z - i| = 1/2 under w = h(z) is the two points z = i + √7/2 and z = i - √7/2.

(a) To express the function h(z) = 1/(4iz + 2) as a composition of a linear function g(z) and reciprocal function f(z), we can rewrite h(z) as follows:

h(z) = 1/(4iz + 2)

= 1/(4i(g(z)) + 2)

= 1/f(g(z))

Here, g(z) represents the linear function and f(z) represents the reciprocal function. To determine g(z), we set g(z) = 4iz + 2.

Therefore, the composition of the linear function g(z) and the reciprocal function f(z) is:

h(z) = 1/f(g(z)) = 1/(4iz + 2)

(b) To find the image of the line y = 2 under w = h(z), we substitute y = 2 into the function h(z) and solve for z.

y = 2

1/(4iz + 2) = 2

To simplify the equation, we multiply both sides by (4iz + 2):

1 = 2(4iz + 2)

1 = 8iz + 4

8iz = -3

z = -3/(8i)

Therefore, the image of the line y = 2 under w = h(z) is the point z = -3/(8i).

(c) To determine the image of the circle |z - i| = 1/2 under w = h(z), we substitute z - i = 1/2 into the function h(z) and solve for w.

|z - i| = 1/2

|z - i|² = (1/2)²

(z - i)(z - i*) = 1/4

z² - iz - iz + i² = 1/4

z² - 2iz + 1 = 1/4

z² - 2iz + 3/4 = 0

Now we solve this quadratic equation using the quadratic formula:

z = (-(-2i) ± √((-2i)² - 4(1)(3/4))) / (2(1))

z = (2i ± √(-4i² - 3)) / 2

z = (2i ± √(4 + 3)) / 2

z = (2i ± √7) / 2

z = i ± √7/2

So, the image of the circle |z - i| = 1/2 under w = h(z) is the two points z = i + √7/2 and z = i - √7/2.

Learn more about the complex plane at

https://brainly.com/question/24296629

#SPJ4

a) Variables strongly/weakly positively/negatively correlated in the "airquality" data set can be identified through correlation analysis.

b) The t-test can be used to check if the temperature variable in the "airquality" data set is significantly different from 79.

c) The t-test can be used to check if the temperature variable is significantly different between samples A and B (observations 1 to 77 and 78 to 153, respectively) in the "airquality" data set.

a) To identify variables that are strongly/weakly positively/negatively correlated in the "airquality" data set, correlation analysis can be performed.

Correlation analysis measures the strength and direction of the linear relationship between variables.

By calculating correlation coefficients (such as Pearson's correlation coefficient), it is possible to determine if variables have a strong positive correlation (close to +1), weak positive correlation (between 0 and +1), strong negative correlation (close to -1), or weak negative correlation (between 0 and -1).

This analysis helps identify the nature of the relationships between variables in the dataset.

b) To check if the temperature variable in the "airquality" data set is significantly different from 79, a t-test can be conducted.

The t-test assesses whether the mean of a sample is significantly different from a hypothesized value (in this case, 79).

By comparing the t-statistic calculated from the sample data to the critical t-value at a given significance level, such as 0.05, it can be determined if the temperature is significantly different from 79.

If the calculated t-value falls outside the critical t-value range, the temperature variable is considered to be significantly different.

c) To check if the temperature variable is significantly different between samples A (observations 1 to 77) and B (observations 78 to 153) in the "airquality" data set, a t-test can also be used.

This comparison aims to determine if the means of temperature in samples A and B are significantly different.

By calculating the t-statistic and comparing it to the critical t-value at a chosen significance level, such as 0.05, it can be determined if the temperature variable differs significantly between the two samples.

If the calculated t-value falls outside the critical t-value range, it indicates a significant difference in temperature between samples A and B.

Learn more about correlation analysis

brainly.com/question/29785220

#SPJ11

Answer:

fixed - monthly rent, car payment, savings for new guitar

variable - movies, video games, snacks

Step-by-step explanation:

Fixed costs are costs that do not vary with output.

the amount of rent paid is fixed.  

Variable costs are costs that vary with production

the amount paid at the movies depend on the number of movies watched

Answer:

=8x+4

Step-by-step explanation:

=2(4x+2)

a=2,b=4x,c=2

=2 x 4x + 2 x 2

Simplify- 2 x 4x + 2 x 2: 8x + 4

Answer: 13

Step-by-step explanation: the square root is 12.68925

so i rounded up to 13

Answer:

12.6885775404 or 13 if you need to round up

Step-by-step explanation:

Hey there!

ASSUMING

2(3r + 4) - 3 (r + 1) = 11

IF SO

2(3r + 4) - 3 (r + 1) = 11

2(3r + 4) - 3 (1r + 1) = 11

DISTRIBUTE

2(3r) + 2(4) - 3(1r) - 1(1) = 11

6r + 8 - 3r - 1 = 11

COMBINE the LIKE TERMS

(6r - 3r) + (8 - 3) = 11

6r - 3r + 8 - 3 = 11

3r + 5 = 11

SUBTRACT 5 to BOTH SIDES

3r + 5 - 5 = 11 - 5

SIMPLIFY!

3r = 11 - 5

3r = 6

DIVIDE 3 to BOTH SIDES
3r/3 = 6/3

SIMPLIFY!

r = 6/3

r = 2

Therefore, the answer should be: r = 2

Good luck on your assignment & enjoy your day!

~Amphitrite1040:)

(i) The polar coordinates (r, θ) of the point (4, 3) are (5, arctan(3/4)). (ii) For a point with negative radius, the concept of polar coordinates is not applicable as polar coordinates are defined for points in the positive radial direction.

(i) To find the polar coordinates (r, θ) of the point (4, 3), we can use the formulas:

r = √(x² + y²) and θ = arctan(y/x).

Given that x = 4 and y = 3, we can calculate the values:

r = √(4² + 3²) = 5

θ = arctan(3/4)

Therefore, the polar coordinates of the point (4, 3) are (5, arctan(3/4)).

(ii) For a point with negative radius, the concept of polar coordinates is not applicable. In polar coordinates, the radius (r) is always defined as a positive value. Negative values of r would imply a direction opposite to the positive radial direction. However, the convention of polar coordinates focuses on the positive radial direction, so negative radius values are not considered.

In conclusion, polar coordinates are not defined for points with negative radius values, and therefore, the concept of polar coordinates does not apply to find the polar coordinates of a point with r < 0.

Learn more about polar coordinates here:

https://brainly.com/question/31904915

#SPJ11

Answer:

Distance= 15.3

Step-by-step explanation:

To determine whether the boxplot represents the information given in the histogram, we need to examine the characteristics of both the boxplot and the histogram.

The boxplot provides a visual representation of the distribution of a dataset, showing the minimum, first quartile, median, third quartile, and maximum values. It also displays any outliers that may be present. On the other hand, a histogram provides a graphical representation of the frequency or count of data values within specified intervals or bins.

Without specific information or visuals of the boxplot and histogram in question, it is not possible to directly compare them and determine their compatibility. Therefore, it is not possible to answer the question based on the information provided.

Learn more about boxplot  from

https://brainly.com/question/14277132

#SPJ11

The confidence interval for the population mean would be 1.8 < u  < 3.4.

The practical use of the confidence interval is this: A The confidence interval can be used to estimate that, with 99% confidence, the interval from to actuality contains the true mean DNA base of all people.

The confidence interval expresses the probability that a given population parameter will be centered between a set of values. So, the practical use of the confidence interval is to indicate that if the experiment is repeated 100 times, 99 of those times will give a result that shows that the true mean of all people falls within the obtained values.

The confidence interval is obtained thus: μ ± Ζ s/√n

where μ = sample mean

Z = confidence level

s = standard deviation

n = sample size

From the question DNA samples or n = 10

Critical value = 2.262

Sample mean = 2.6

Standard deviation = 1.0749

The margin of error = 2.262 * 1.0749/√10

= 0.769

We can construct the 95% confidence level interval as follows:

x bar - E < u < x bar + E

= 2.6 - 0.7690 < u < 2.6 + 0.7690

= 1.8 < u  < 3.4.

Learn more about confidence intervals here:

https://brainly.com/question/15712887

#SPJ4

The interior of S consists of all the points in S that are not in the boundary of S. These points are:

The rational numbers strictly between 13 and 16

The rational numbers strictly between 1 and 5

The rational numbers strictly between 5 and 7

The natural numbers strictly between 1 and 18, excluding 20

The set S consists of the rational numbers between 13 and 16 (inclusive), the open interval between 1 and 5, the open interval between 5 and 7, the singleton set {20}, and the set of natural numbers between 0 and 18.

To find the interior of S, we need to find all the points in S that have a neighborhood entirely contained in S. In other words, we need to find all the points in S that are not on the boundary of S.

The boundary of S includes the endpoints of the closed interval [13, 16] and the endpoints of the open intervals (1, 5) and (5, 7), as well as the points 20, 0, and 18.

Therefore, the interior of S consists of all the points in S that are not in the boundary of S. These points are:

The rational numbers strictly between 13 and 16

The rational numbers strictly between 1 and 5

The rational numbers strictly between 5 and 7

The natural numbers strictly between 1 and 18, excluding 20

Note that the point 20 is not in the interior of S because it is on the boundary of S. Similarly, the points 0 and 18 are not in the interior of S because they are in the boundary of S.

Learn more about " Sets" : https://brainly.com/question/2166579

#SPJ11

Answer:

the answer is 4

Step-by-step explanation:

Answer:

Step-by-step explanation:

The correct answer is Always

kason11wd and 2 more users found this answer helpful

THANKS  

1

4.0

(1 vote)

1

the correct answer was never. I appreciate your answer though.

.............................................................................................................................................................

P(A and B) means add A and B

if both A and B are both greater then 1/2

then when they are added they will always be greater than 1

bolivianouft and 2 more users found this answer helpful

THANKS  

1

5.0

(1 vote)

1

the correct answer was never. I appreciate your answer though.

Answer:The correct answer is Always

Answer:

f(x) was translated to the left by 5 units to form g(x)

Step-by-step explanation:

Given the function f(x) = x to g(x)=x-5, if you look at the g(x) function, you will see that 5 was subtracted from the abscissa x that is;

g(x) = f(x) - 5

This shows' that the function f(x) was translated to the left by 5 units to form g(x). This described the required translation

Answer:

I don't know

Step-by-step explanation:

I don't know

Answer:

Ice rental at the local skating rink is $150 for 2h. Skate rental is $3 per person. The Grade 8 class went skating. All students rented skates. The total cost was $231. How many students went skating?

Answer:

-2.15

Step-by-step explanation:

Plug it into the calculator and it should give you the same answer.

Answer:

The answer is -2.15.

Step-by-step explanation:

Hope this helped Mark BRAINLIEST!!!

2(19-7) im pretty sure