Calculate the mass in grams of 8.35 × 10²² molecules of CBr₄.

Answers

Answer 1

To calculate the mass in grams of 8.35 × 10²² molecules of CBr₄ (carbon tetrabromide), we need to use Avogadro's number to convert the given number of molecules to moles and then use the molar mass of CBr₄ to convert moles to grams.

The molar mass of CBr₄ can be calculated by adding up the atomic masses of carbon (C) and four bromine (Br) atoms. The atomic mass of carbon is approximately 12.01 g/mol, and the atomic mass of bromine is approximately 79.90 g/mol.

Molar mass of CBr₄ = (1 × 12.01 g/mol) + (4 × 79.90 g/mol) = 331.74 g/mol

To convert the number of molecules to moles, we divide the given number of molecules by Avogadro's number (6.022 × 10²³ molecules/mol):

Moles of CBr₄ = (8.35 × 10²² molecules) / (6.022 × 10²³ molecules/mol) = 0.138 mol

Finally, to find the mass in grams, we multiply the number of moles by the molar mass:

Mass of CBr₄ = (0.138 mol) × (331.74 g/mol) = 45.80 g

Therefore, the mass in grams of 8.35 × 10²² molecules of CBr₄ is approximately 45.80 grams.

To learn more about molar mass click here : brainly.com/question/31545539

#SPJ11


Related Questions

how many grams is 4.2 moles HCL​

Answers

≈153.14 grams. Sine one mole of HCL is ≈36 grams. Just multiple 4.2 by 36.

Identify which redox reactions occur spontaneously in the forward direction.
Check all that apply.
2Ag+(aq)+Ni(s)→2Ag(s)+Ni2+(aq)
2Cr(s)+3Pb2+(aq)→2Cr3+(aq)+3Pb(s)
Ca2+(aq)+Zn(s)→Ca(s)+Zn2+(aq)
Sn(s)+Mn2+(aq)→Sn2+(aq)+Mn(s)

Answers

The redox reactions that occur spontaneously in the forward direction are:

2Ag+(aq) + Ni(s) → 2Ag(s) + Ni2+(aq)

Ca2+(aq) + Zn(s) → Ca(s) + Zn2+(aq)

Among the given redox reactions, the ones that occur spontaneously in the forward direction are: 2Ag+(aq) + Ni(s) → 2Ag(s) + Ni2+(aq) and Ca2+(aq) + Zn(s) → Ca(s) + Zn2+(aq). These reactions occur because the reduction potentials of Ag+ and Ca2+ are higher than those of Ni2+ and Zn2+, respectively. As a result, Ag+ and Ca2+ are reduced, while Ni and Zn are oxidized. The other two reactions, 2Cr(s) + 3Pb2+(aq) → 2Cr3+(aq) + 3Pb(s) and Sn(s) + Mn2+(aq) → Sn2+(aq) + Mn(s), do not occur spontaneously in the forward direction due to the lower reduction potentials of the species being reduced.

Learn more about redox reaction here : brainly.com/question/28300253

#SPJ11

0.39 moles of a gas fill a 5.0 l container that connects to a balloon through a closed valve. if the valve is opened an pressure remains the same, what would be the total number of moles of gas needed in order to inflate the balloon by 1.5

Answers

Answer: 5.39

Explanation: you are adding the balloon's volume and the container's volume

. I am described as being conductive, malleable, shiny, and reactive with HCl. I am one of the most reactive elements. I turn black within seconds when I am exposed to air. If someone drops water on me, I will explode. When I do explode I send off characteristic purple-red (violet) flame. Who am I?

Answers

Answer:

Potassium

Explanation:

Most reactive metal in the reactivity series

The element in the question is referred to the alkali metal which is known as Potassium

Potassium is a highly reactive metal and reacts with Hydrochloric acid to

form a salt known as Potassium chloride and hydrogen gas.

Hcl + K ⇒ Kcl₍s₎ + H₂₍g₎

Potassium has a white color but when it reacts with water it explodes and

gives out a purple-red color as a result of the high excitation of electrons.

Read more on https://brainly.com/question/22993452

22 Determine the molar mass of an unknown gas that has a volume of 72.5 mL at a temperature of 68C, and a pressure of 0.980 atm and a mass of 0.207 g.

Answers

Answer:

81.5g/mol

Explanation:

Molar mass is the ratio between mass of a substance (In this case, 0.207g) and moles presents in this mass.

To solve this question we must find the moles of the gas in order to obtain the molar mass using:

PV = nRT

PV / RT = n

Where P is pressure = 0.980atm

V is volume in Liters = 0.0725L

R is gas constant = 0.082atmL/molK

T is absolute temperature = 68°C + 273.15 = 341.15K

0.980atm*0.0725L / 0.082atmL/molK*341.15K = n

2.54x10⁻³ moles = n

Thus, the molar mass of the gas is:

0.207g / 2.54x10⁻³ moles

81.5g/mol

T/F A reaction which is endothermic and has an overall increase in entropy is spontaneous only at high T

Answers

"A reaction which is endothermic and has an overall increase in entropy is spontaneous only at high T" is incorrect.

"A reaction which is endothermic and has an overall increase in entropy is spontaneous only at high T" is false.A spontaneous process occurs naturally and without any assistance. The rate of the process does not affect its spontaneity; instead, spontaneity is determined by the change in free energy that occurs during the reaction.A reaction is spontaneous if the Gibbs free energy of the reaction is negative (∆G < 0). Gibbs free energy is calculated using the equation: ∆G = ∆H - T∆S, where ∆H is the enthalpy change, T is the temperature, and ∆S is the entropy change of the reaction.A reaction that is endothermic (∆H > 0) and has an increase in entropy (∆S > 0) can be spontaneous at any temperature if the free energy change is negative. As a result, the given statement "A reaction which is endothermic and has an overall increase in entropy is spontaneous only at high T" is incorrect.

Learn more about endothermic here:

https://brainly.com/question/11902331

#SPJ11

Se midió el pH de una muestra del agua de lluvia en la ciudad de México, y se obtuvo un valor de 3.5 Calcula la [H+] en dicha muestra.

Answers

Answer:

[tex][H^+]=3.16x10^{-4}M[/tex]

Explanation:

¡Hola!

En este caso, dado que el pH de una solución se entiende como el potencial de los iones hidrógeno en la misma, es posible recordar la ecuación que se usa para calcularlo:

[tex]pH=-log([H^+])[/tex]

De este modo, al conocer el pH, se resuelve para la concentración de iones hidrógeno como se muestra a continuación:

[tex][H^+]=10^{-pH}[/tex]

Así, reemplazamos el pH para obtener:

[tex][H^+]=10^{-3.5}=3.16x10^{-4}M[/tex]

¡Saludos!

please helpp: All things that are acidic will eventually produce ___ in an aqueous solution?​

Answers

Answer:

Protons / H+ ions

Explanation:

The acids are compounds with a pH range between 1-7, while the base has a pH range of 7-14. Acids produce hydrogen ions or protons in the solution.

What is pH?

The pH can be defined as the hydrogen ion concentration in the solution. The higher the proton concentration in the solution, the lower will be the pH.

The pH of 7 has an equal number of hydrogen and hydroxide ions contributing to the neutral pH. The alkaline pH is contributed by the hydroxide ion concentration.

The acids fall at the lower pH range with a high hydrogen ion concentration. Thus, acids produce hydrogen ions or protons in the aqueous solution.

Learn more about acids, here:

https://brainly.com/question/1515003

Select the correct statement that corresponds to the second law of thermodynamics. (a) The standard Gibbs free energy change, ΔG°, can be calculated from Gibbs free energies of formation, ΔGf° (b) The entropy of a perfect crystal of any pure substance approaches zero, as the temperature approaches absolute zero (0 K) (c) The entropy change for a reaction, DS°C, can be calculated from the standard molar entropies of the reactants and products (d) ΔE universe - ΔE system + ΔEsurroundings = 0 (e) In any spontaneous process, ΔS universe - ΔS system + ΔSsurroundings > 0

Answers

The correct statement (e) captures the fundamental principle of the second law of thermodynamics, emphasizing the tendency of entropy to increase in spontaneous processes, leading to a positive net entropy change of the universe.

The second law of thermodynamics is a fundamental principle that describes the behavior of energy and entropy in physical systems. It can be stated in various ways, but the correct statement corresponding to the second law is: In any spontaneous process, ΔS universe - ΔS system + ΔS surroundings > 0.

This statement captures the essence of the second law, which is that the entropy of an isolated system tends to increase over time. The entropy change of the universe (ΔS universe) is the net change in entropy of the system and its surroundings. For a spontaneous process, where the system undergoes a change without external intervention, the total entropy change of the universe must be greater than zero.

The entropy change of the system (ΔS system) and the entropy change of the surroundings (ΔS surroundings) may have opposite signs, but their magnitudes must be such that the net entropy change of the universe is positive. This reflects the irreversibility of natural processes, where entropy tends to increase and energy becomes more dispersed. The correct statement (e) captures the fundamental principle of the second law of thermodynamics, emphasizing the tendency of entropy to increase in spontaneous processes, leading to a positive net entropy change of the universe.

Learn more about  thermodynamics here : brainly.com/question/1368306
#SPJ11

What is the Molar Mass of MgO?

Answers

Answer:

The answer should be 40.3044 g/mol

In the following reaction, identify the element getting oxidized and element getting reduced: Ba(s) + 2H+ (aq) → Ba2+ (aq) + H2(g) Ba getting oxidized/H getting reduced Ba2 getting oxidized / Ba2+ getting reduced H getting oxidized/H* getting reduced H getting oxidized / Ba getting reduced NO

Answers

The correct answer  is:Ba getting oxidized/H getting reduced.

Explanation:  In the following reaction, Ba is getting oxidized and H is getting reduced. Given reaction is: Ba(s) + 2H+ (aq) → Ba2+ (aq) + H2(g)In the given redox reaction, the Ba is being oxidized to Ba2+. Its oxidation state is increasing from 0 to +2. This means that Ba is losing electrons and getting oxidized. Hence, Ba is the element that is getting oxidized in the given reaction.The H+ is getting reduced to H2. Its oxidation state is decreasing from +1 to 0. This means that H is gaining electrons and getting reduced. Hence, H is the element that is getting reduced in the given reaction.Therefore, the correct option is:Ba getting oxidized/H getting reduced.

Learn more about the element getting oxidized and element getting reduced here https://brainly.in/question/33572786

#SPJ11

What problems may global warming cause?

Answers

Answer:

Global warming stresses ecosystems through temperature rises, water shortages, increased fire threats, drought, weed and pest invasions, intense storm damage and salt invasion, just to name a few.

Explanation:

Global warming stresses ecosystems through temperature rises, water shortages, increased fire threats, drought, weed and pest invasions, intense storm damage and salt invasion, just to name a few.

____________ are traits characteristics or features of an organism that are passed from parent to offspring

Answers

Answer:

Heredity, also called inheritance or biological inheritance, is the passing on of traits from parents to their offspring; either through asexual reproduction or sexual reproduction, the offspring cells or organisms acquire the genetic information of their parents.

Explanation:

Plss markk mee brainlistt

27 which statement about members of a homologous series is true ? a) they are all constitutional isomers. b) they are always hydrocarbons. c) each differs from its nearest neighbors by 14 amu. d) they may also be classified as tautomers.

Answers

The statement about members of a homologous series that is true is that they differ from their nearest neighbors by 14 amu (c).

A homologous series is a group of compounds with a similar general formula, chemical properties, and a constant increment in molecular structure. As a result, each member varies from the previous by a constant unit, which is often a CH2 group.Each member of the homologous series is classified as either a tautomer or a constitutional isomer. Constitutional isomers, also known as structural isomers, are compounds with the same molecular formula but different structural arrangements. Isomers of tautomers are structural isomers that interconvert by a simple chemical reaction. As a result, the formula and composition of tautomers are the same, but they differ in the distribution of their valence electrons and bonding patterns.Members of a homologous series may or may not be hydrocarbons, and they are not always constitutional isomers. Therefore, statement (a) and statement (b) are both incorrect. Statement (d) is also incorrect because tautomers cannot be classified as members of a homologous series. However, statement (c) is correct because members of a homologous series differ from their nearest neighbors by a constant increment in molecular structure, which is usually 14 amu. Therefore, the correct answer is C.

To know more about homologous series visit:

https://brainly.com/question/30842881

#SPJ11

A sample of gas has a volume of 2.50 L at 236 kPa and 75.0 °C. What
is the pressure (in atm) of the gas if it expands to 3.75 L at 25.0 °C?

Answers

If a sample of gas has a volume of 2.50 L at 236 kPa and 75.0 °C, the pressure 1.18 atm is required.

Only ideal gas is subject to the ideal gas law; vanderwaal gas is not. Here, Boyle's and Charles' gas laws are combined. As a result, the new gas pressure is 1.18 atm.

The relation between Pressure, volume, and temperature can be given as:

PV = nRT

In which:

P = pressure of  gas

V= volume of gas

n =number of moles of gas

T =temperature of gas

R = Gas constant

= 0.0821 L.atm/K.mol

Combining Boyle's and Charles' gas law

P₁V₁/T₁ = P₂V₂/T₂

{ (5.28atm) (2.50 L)} ÷348 K ={ (P2) (3.75 L)} ÷298 K

P₂ =1.18 atm

Thus, the new pressure of gas is 1.18 atm when the temperature is changed to 348K and volume is increased to 3.75 L.

Learn more about ideal gas, here:

https://brainly.com/question/30236490

#SPJ1

If you were traveling from Earth to Neptune in a spaceship, what would
you see between Mars and Jupiter?

Imposters
little green men
Pluto
the asteroid belt

Answers

Answer:

I believe it would be Asteroid Belt

Explanation:

little green men and imposters seem very unlikely, and Pluto is definetely not between earth and Jupiter

Answer:

the asteroid belt

Explanation:

it orbits between mars and jupiter

Which element is oxidized in the reaction below?
Fe(CO)5 (l) + 2HI (g) →Fe(CO)4I2 (s) + CO (g) + H2(g)
The answer is Fe...but I'm messing up on setting up my oxidationcharges. Can someone clearly explain how to do this?

Answers

The element that is oxidized in the reaction Fe(CO)5 (l) + 2HI (g) → Fe(CO)4I2 (s) + CO (g) + H2(g) is iron (Fe). When determining the oxidation state of iron (Fe), we use the rule that the oxidation state of a monatomic ion is equal to its charge.

The oxidation state of Fe in Fe(CO)5 is zero. In Fe(CO)4I2, the oxidation state of Fe is +2. So, Fe is oxidized in the reaction.Balancing the redox reaction:Fe(CO)5 (l) + 2HI (g) → Fe(CO)4I2 (s) + CO (g) + H2(g)The oxidation half-reaction is:Fe(CO)5 (l) → Fe(CO)4I2 (s) + I- (aq)The reduction half-reaction is:2H+ (aq) + 2e- → H2 (g)By adding both half-reactions, the balanced redox reaction is:Fe(CO)5 (l) + 2HI (g) → Fe(CO)4I2 (s) + CO (g) + H2(g)The oxidation half-reaction shows that iron (Fe) has lost electrons, thereby being oxidized.

To know more about oxidized visit:

https://brainly.com/question/9830288

#SPJ11

A canister of neon contains 4.8x1024 atoms of the gas. How many moles of neon are present in the canister?

Answers

Answer:

7.97 moles of neon are present in the canister.

Explanation:

Avogadro's constant or "Avogadro's number" is the number of constituent particles found in the amount of substance in one mole.

In other words, Avogadro's number is the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023*10²³ particles per mole. Avogadro's number applies to any substance.

So, you can apply the following rule of three: if 6.023*10²³ atoms are present in 1 mole, 4.8*10²⁴ atoms are present in how many moles?

[tex]amount of moles=\frac{4.8*10^{24}atoms*1 mole }{6.023*10^{23}atoms}[/tex]

amount of moles= 7.97 moles

7.97 moles of neon are present in the canister.

calculate the molar solubility of baso4 in a 0.250 m solution of nahso4? ka for hso4- = 1.2 x 10-2.

Answers

The required answer for the molar solubility of BaSO4 in a 0.250 M solution of NaHSO4 is 1.05 × 10-5 M.

Explanation: Molar solubility is defined as the number of moles of a solute that can dissolve per liter of solution before the solution becomes saturated. It can be determined by calculating the equilibrium concentration of the solute using the solubility product expression for the given ionic compound, BaSO4. We are given the concentration of NaHSO4 and the acid dissociation constant for HSO4-.

The balanced chemical equation is:BaSO4(s) ↔ Ba2+(aq) + SO42-(aq)We are assuming the solution is dilute and that the ionic strength is low. Therefore, we can simplify the expression for the solubility product to:Ksp = [Ba2+][SO42-]The expression for the acid dissociation constant of HSO4- is:Ka = [H+][SO42-]/[HSO4-]

The first step is to calculate the concentration of HSO4-. We can use the equilibrium expression for the acid dissociation reaction to solve for [HSO4-]:Ka = [H+][SO42-]/[HSO4-]Rearranging the expression and solving for [HSO4-]:[HSO4-] = [H+][SO42-]/Ka[HSO4-] = (0.250 × x)/(1.2 × 10-2)[HSO4-] = 20.8333 × xThe molar solubility of BaSO4 in a 0.250 M solution of NaHSO4 is x. At equilibrium, the concentration of Ba2+ and SO42- are both x. Using the solubility product expression:Ksp = [Ba2+][SO42-]Ksp = x2x = sqrt(Ksp)[BaSO4] = x = sqrt(Ksp) = sqrt(1.1 × 10-10) = 1.05 × 10-5 MTherefore, the molar solubility of BaSO4 in a 0.250 M solution of NaHSO4 is 1.05 × 10-5 M.

Learn more about Molar Solubility here https://brainly.in/question/18823163

#SPJ11

A system gains 652 kJ of heat, resulting in a change in internal energy of the system equal to +241 kJ. How much work is done?

Answers

Answer:

-411 kj

Explanation:

We solve by using this formula

∆U = ∆Q + ∆W

This formula is the first law of thermodynamics

Change in internal energy U = +241

Heat gained by system Q = 652

Putting the value into the equation

+241 = 652 + W

Workdone = 241 - 652

Workdone = -411 kj

Since work done is negative it means that work was done by the system

Which of the following usually occurs when a molecule dissolves in water?
a. The covalent bonds in the molecule break.
b. The covalent bonds in water break.
c. Covalent bonds between the molecule and water form.
d. Covalent bonds between several of the molecules form.
e. Hydrogen bonds form between the molecule and water.

Answers

Answer:

e. Hydrogen bonds form between the molecule and water.

Explanation:

When a molecule dissolves in water, it is typically because the molecule has polar or charged regions that can interact with the polar water molecules. Water is a highly polar molecule due to its bent shape and the presence of electronegative oxygen atoms. As a result, it forms hydrogen bonds with other water molecules and with other polar or charged substances.

When a molecule dissolves in water, the water molecules surround the individual molecules and interact with them through hydrogen bonding. The positively charged hydrogen atoms of water form hydrogen bonds with negatively charged regions of the dissolved molecule, such as oxygen or nitrogen atoms, or with partially negative regions due to uneven distribution of electron density. This interaction between the water molecules and the dissolved molecule is what allows the molecule to become dispersed and solvated in the water, forming a homogeneous mixture.

It's important to note that during the dissolution process, the covalent bonds within both the water molecules and the dissolved molecule generally remain intact. Dissolving in water does not typically involve breaking the covalent bonds within the molecule or the water molecule. Instead, it involves the formation of hydrogen bonds between the solvent (water) and solute (dissolved molecule).

is mixing colored light (like using this equipment in this lab) the same as mixing colored paint (as if you were mixing actual paint together)?

Answers

The mixing of colored light and colored paint follows different color models and produces different outcomes due to the properties of light and pigments.

Mixing colored light and mixing colored paint are not the same. When mixing colored light, such as using equipment in a lab, the primary colors are red, green, and blue (RGB). By combining different intensities of these colors, you can create various shades and hues. Mixing all three primary colors at full intensity produces white light.

On the other hand, mixing colored paint involves using the subtractive color model. The primary colors are cyan, magenta, and yellow (CMY). When you mix paints, the pigments absorb certain wavelengths of light, and the reflected light determines the perceived color. Mixing all three primary colors in paint results in a dark, muddy color, not white.

To know more about the Paint, here

https://brainly.com/question/30576747

#SPJ4

place the following in order of increasing standard molar entropy. n2o4 (g) no (g) no2 (g)

Answers

The standard molar entropy of no₂ is 240.0 J/(mol.K).Therefore, the order of increasing standard molar entropy of the given gases is n₂o₄ (g) < no (g) < no₂ (g).

Entropy is the measure of disorder in a system. It is a thermodynamic property that depends on the degree of randomness in the molecules of a substance. The unit of entropy is Joules per Kelvin. In general, the entropy of a substance increases with an increase in temperature.

This is because at higher temperatures, the molecules of a substance have more kinetic energy and can move more freely, leading to an increase in the number of possible arrangements of molecules, which increases entropy.

Increasing Standard Molar Entropy Order n₂o₄ (g) < no (g) < no₂ (g)The standard molar entropy (S°) is the entropy of one mole of a substance at standard temperature and pressure (STP). In the order of increasing standard molar entropy, the gases listed are as follows: n₂o₄ (g) has the least entropy because it is a relatively heavy and rigid molecule. It has fewer possible arrangements of molecules, which results in a lower entropy.

The standard molar entropy of n₂o₄ is 304.3 J/(mol.K).no (g) has more entropy than n₂o₄ because it is a lighter molecule that is more mobile. It has more possible arrangements of molecules, leading to higher entropy.

The standard molar entropy of no is 210.6 J/(mol.K).no₂ (g) has the highest entropy because it is the lightest and most mobile molecule of the three gases. It has the most possible arrangements of molecules, leading to the highest entropy. The standard molar entropy of no₂ is 240.0 J/(mol.K).

Therefore, the order of increasing standard molar entropy of the given gases is n₂o₄ (g) < no (g) < no₂ (g).

To know more about standard molar entropy refer here: https://brainly.com/question/32252456#

#SPJ11

Which statements are true regarding the following spontaneous reaction? CHOOSE ALL CORRECT ANSWERS; there may be more than one correct answer. Mg(s) + CoSO4(aq) ? MgSO4(aq) + Co(s)
Co is oxidized
O is reduced
S is oxidized
S is reduced
This is not a redox reaction.
O is oxidized
Co is reduced
Mg is reduced
Mg is oxidized

Answers

Mg is reduced to Mg2+.Hence, the correct option is Mg is oxidized, Co is reduced, and Co is oxidized

In the given reaction, Mg(s) + CoSO4(aq) ⟶ MgSO4(aq) + Co(s), the true statements regarding the given spontaneous reaction are: Mg is oxidized.Co is reduced.Co is oxidized. The reduction half-reaction of the given reaction is Co2+ + 2e− ⟶ Co. The oxidation half-reaction of the given reaction is Mg ⟶ Mg2+ + 2e−.The oxidation number of Co changes from +2 in CoSO4(aq) to 0 in Co(s), therefore, Co is oxidized in the given reaction. The oxidation number of Mg changes from 0 in Mg(s) to +2 in MgSO4(aq), therefore, Mg is oxidized in the given reaction. Therefore, Mg is reduced to Mg2+.Hence, the correct option is Mg is oxidized, Co is reduced, and Co is oxidized. The explanation of each of the true statements is already given above.

know more about oxidation half-reaction

https://brainly.com/question/13977994

#SPJ11

what are the two components of a solution

Answers

The components of a solution are solute and solvent

HELP PLEASE!!!!!!!!!!!!

Answers

Answer:

it is a practical question..ASAP

part a which substance is the oxidizing agent in the reaction below? fe(co)5 (l) 2hi (g) → fe(co)4i2 (s) co (g) h2(g)

Answers

Answer : The substance that acts as the oxidizing agent in the reaction:Fe(CO)5(l) + 2HI(g) → Fe(CO)4I2(s) + CO(g) + H2(g)is HI, or hydrogen iodide.

Explanation : In this reaction, HI acts as an oxidizing agent and Fe(CO)5(l) acts as a reducing agent.What is an oxidizing agent?An oxidizing agent is a substance that oxidizes or causes oxidation in another compound by transferring electrons to that compound. In the process, the oxidizing agent itself gets reduced.Oxidizing agents are chemicals that accept electrons from other substances. They are generally characterized by their ability to oxidize another substance, which is why they are sometimes referred to as electron acceptors.

Examples of oxidizing agents include hydrogen peroxide, potassium permanganate, and sodium hypochlorite.

Learn more about Oxidizing Agent here https://brainly.in/question/2205753

#SPJ11

I need help...well honestly I don't wanna do it so can someone help because this is just confusing....I don't need any citing or whatever just give me a short explication of how Denver is mile high....thank youuu...​

Answers

Answer: Denver is named after James W. Denver, a governor of the Kansas Territory. It is nicknamed the Mile High City because its official elevation is exactly one mile (5280 feet or 1609.344 meters) above sea level.

.Consider the phase diagram below. If the dashed line at 1 atm of pressure is followed from 100 to 500 °C, what phase changes will occur (in order of increasing temperature)?
sublimation, followed by vaporization
sublimation, followed by deposition
melting, followed by vaporization
vaporization, followed by deposition
No phase change will occur under the conditions specified.

Answers

2. The phase changes that will occur from 100 to 500 °C at 1 atm of pressure are sublimation followed by deposition.

Based on the information provided, the correct answer is:

2. sublimation, followed by deposition

Following the dashed line at 1 atm of pressure on the phase diagram from 100 to 500 °C, the phase changes that will occur are sublimation, followed by deposition.

At lower temperatures, the substance will undergo sublimation, transitioning directly from the solid phase to the gas phase. As the temperature increases, the substance will exist as a gas.

However, at higher temperatures, as the temperature decreases again, the gas will undergo deposition, transitioning directly from the gas phase back to the solid phase.

Therefore, the substance will experience sublimation and deposition as the temperature changes within the specified range, without undergoing melting or vaporization.

Learn more about deposition here:

https://brainly.com/question/32008483

#SPJ4

The population size of panda

bears increases dramatically

The

population will decrease because

Answers

Answer:

it will decrease because there will not be food for all of them and there is very little space for them now so if there is more they will start to fight

Explanation:

there is very little habitat left for panda bears so if there population increases the food and space with be filed

Hello! jamilialves888

I'm glad you asked my name is ✰Tobie✰

And I will help you understand why the population of ⚝pandas ⚝

is decreasing .

-Your answer :βy Tobie

≛So why are pandas going extinct?

One of the main cause is due to the destruction of their own habitat

Since china is a country that is constantly growing their own homes are slowly   being destroyed Since their habitats are becoming destroyed it forces them to live in small unhabitable area .

≛This leads to another problem.....

If they are forced to live in a small area there will be less food...

Since there is a shortage of food that will leave the panda's to slowly starve to death since pandas only eat bamboo they could never be able to live anywhere else....Another reason panda's are going extinct is because they are being hunted for their fur.

ex·tinct

/ikˈstiNG(k)t/

_____________

It means that the species does not exist anymore and

are no longer in existence

Hope this helps!

                                                                                             -Tobie <3

ʕ •ᴥ•ʔ

Other Questions
which group in the disaster recovery team decides when employees can reenter the affected work area after a disaster? When the price level falls, the number of dollars needed to buy a representative basket of goods Group of answer choices decreases, so the value of money rises. increases, so the value of money rises. increases, so the value of money falls. decreases, so the value of money falls. Can someone explain why the answer is True. Will make brainliest. 1. In spite of her rain-soaked clothing and ______________seemed to me that she had never looked lovelier.appearance, it Please give me the correct answer.Only answer if you're very good at English.Please don't put a link to a website.Choose the answer that BEST explains how the last paragraph helps develop the central idea.A: It supports the opinion that the opinion that the revolution could never possibly have occurred without the help of social media.B: It explains the title of the article and introduces one of the revolutionaries who used social media.C: It suggests that social media may actually have contributed nothing of importance to the revolution.D: It describes contrasting opinions about how much social media influenced the revolution. **JAVA LANGUAGE ONLY****MANDATORY RULES****PUT COMMENTS ON CODE SO I CAN SEE WHAT YOU ARE DOING****Submit the .java files, UML diagrams, and javadoc****#1 Employee Class (include 2 .java files, one for Employee and one for EmployeeDemo).**USE SOME OF THE FOLLOWING METHODS IN CODE **Display method, Deep Method, .Length Method, MathPow Method,GetfFleName Method ,GetTotalSales Method***HAVE OUTPUT SO I CAN SEE WHAT IT LOOKS LIKE****USE GOOD CODING STYLE* 1. Enployee Class Write a class named Employee that has the following fields: name. The name field references a string object that holds the employee's name. idNumber. The idNumber is an int variable that holds the employee's ID number. department. The department field references a string object that holds the name of the department where the employee works. position. The position field references a string object that holds the employee's job title.The class should have the following constructors: A constructor that accepts the following values as arguments and assigns them to the appropriate fields: employee's name, employee's ID number, department, and position. A constructor that accepts the following values as arguments and assigns them to thenappropriate fields: employee's name and ID number. The department and position fields should be assigned an empty string (""). A no-arg constructor that assigns empty strings ("") to the name, department, and position fields, and 0 to the idNumber field.Write appropriate mutator methods that store values in these fields and accessor methods that return the values in these fields. Once you have written the class, write a separate pro- gram that creates three Employee objects to hold the following data:Name ID Number Department PositionSusan Meyers 47899 Accounting Vice PresidentMark Jones 39119 IT ProgrammerJoy Rogers 81774 Manufacturing EngineerThe program should store this data in the three objects and then display the data for each employee on the screen. why an indicator is a necessary part of the titration experiment? PLEASE HELP , DONT SKIP !NO LINKS OR FILES. Suppose that X, Y and Z are three jointly normally distributed random variables with E[X] = 0, E[Y] = 1, E[Z] = 2 and the variance-covariance martrix of (X, Y, Z) is 10 0 1 Var [] = [] 10 2 1 2 10 (i) Estimate X given that Y = 0.5 and Z = -3 using an unbiased minimum variance estimator. (ii) Determine the variance of the above estimator. (b) IntelliMoto is car manufacturer that produces vehicles equipped with a fault detection system that uses information from various sensors to inform the driver about possible faults in the braking system. The system diagnoses faults correctly with probability 99%, but gives false alarms with probability 2%. It is known that such faults occur with probability 0.05%. If the system diagnoses a fault, what is the probability a fault has actually occured? Morgana Company identifies three activities in its manufacturing process: machine setups, machining, and inspections. Estimated annual overhead cost for each activity is $150,000, $375,000, and $87,500, respectively. The cost driver for each activity and the estimated annual usage are number of setups 2,500, machine hours 25,000, and number of inspections 1,750.Compute the overhead rate for each activity. Ayala Architects incorporated as licensed architects on April 1, 2017. During the first month of the operation of the business, these events and transactions occurred: Apr. 1 Stockholders invested $22,770 cash in exchange for common stock of the corporation. 1 Hired a secretary-receptionist at a salary of $474 per week, payable monthly. 2 Paid office rent for the month $1,138. 3 Purchased architectural supplies on account from Burmingham Company $1,644. 10 Completed blueprints on a carport and billed client $2,403 for services. 11 Received $885 cash advance from M. Jason to design a new home. 20 Received $3,542 cash for services completed and delivered to S. Melvin. 30 Paid secretary-receptionist for the month $1,896. 30 Paid $379 to Burmingham Company for accounts payable due.Required:Journalize the transactions. Suppose the prevalence of is 12.5%. We assume thediagnostic test has a sensitivity of 80% and a95% specificity. What is the probability of getting a negativeresult? Which of the following combinations of bends can be used in a conduit run?A. One 90-degree, three 45-degree, and four 30-degreeB. TWO 90-degree, two 45-degree, and four 30-degreeC. Two 90-degree, four 45-degree, and one 30-degreeD. One 90-degree, six 45-degree, and one 30-degree Write the Kb expression for the reaction of propylamine, C3H7NH2 with water.a. [C3H7NH+3][OH][C3H7NH2]b. [C3H7NH2][H2O][C3H7NH+3][OH]c. [C3H7NH2][C3H7NH+3][OH]d. [C3H7NH+3][OH][C3H7NH2][H2O] preparing a given volume of a solution that has a specific molarity is a very important skill for a chemist. one step in that process is calculating the mass of solute required.What mass of solute is required to produce 429.5 mL of a 0.256 M solution of KBr? _______ g KBr HELP NOW!!! 100 POINTS! Cylinder A has a radius of 10 inches and a height of 5 inches. Cylinder B has a volume of 750. What is the percentage change in volume from cylinder A to cylinder B? 50% decrease 75% decrease 50% increase 200% increase Imagine yourself at the top management level of a business. Considering the authority and power of the top management, which of the Scientific Management Approaches would you prefer to apply for the business activities? Discuss the reasons. According to the Real Business Cycle, an increase in government spending: Increases output without any effect on price Increases price without any effect on output O Increases both price and output O Shifts the long-run supply to the right Which verb pair correctly completes this sentence? In circle O, radius OQ measures 9 inches and arc PQ measures 6 inches. Circle O is shown. Line segments P O and Q O are radii with length of 9 inches. Angle P O Q is theta. What is the measure, in radians, of central angle POQ? StartFraction 2 pi Over 3 EndFraction radians StartFraction 3 pi Over 4 EndFraction centimeters StartFraction 4 pi Over 3 EndFraction radians StartFraction 3 pi Over 2 EndFraction radians