Answer:
y = -2x + 8
x = 3
y = x - 1
y = 2
Step-by-step explanation:
if 2x + y = 8 and x - y = 1
you can solve using substitution, elimination, matrix etc.
You will find that x = 3 and y = 2
Hope this helped.
A real estate agent has compiled some data on the selling prices of recently sold homes (in $10 000) compared to their distance from the nearest school (in km). (6 marks) 00 8 Distance from School (km) Selling Price ($ 10 000) 7 9 10 4 11 2 11 1 2 12 5 9 8 3 1 6 17 9 25 10 5 6 31 31 29 2 18 23 12 24 2 15 20 The real estate agent runs a linear correlation and concludes that, with a correlation coefficient of r = -0.10..) there is no relationship between the distance from a school, and the selling price is this completely true? Comment on the validity of his result and provide an explanation for the result (Hint: Look at a scatter plot of the data)
The agent's conclusion is partially valid and does not correctly represent the data.
It is not completely true that there is no relationship between the distance from a school and the selling price, even though the linear correlation coefficient of r = -0.10 is a weak correlation, and it indicates a low correlation. This can be supported by looking at the scatter plot of the data. The scatterplot demonstrates that, as the distance from a school rises, the selling price of a house declines.
There is a cluster of more costly houses close to schools, which decreases as distance increases, as can be seen from the scatter plot. The linear correlation coefficient indicates the direction of a relationship (negative or positive) and the strength of the relationship (strong or weak).
Test hypothesis is
H0: ρ = 0
Ha: ρ ≠ 0
Test statistic t = r*[ √(n-2) /√(1-r2)]
t = -0.10*[ √(17-2) /√(1-(-0.10)2)] = -0.389249472
Test statistic t = -0.389
Degrees of freedom
(df) =n-2 = 15
P-value
P-value =P(|t| >t observed) = 0.7027
TDIST(t,df,2) (excel)
Since p-value > α hence fails to reject H0
However, correlation does not imply causation. As a result, it is appropriate to say that there is a weak negative correlation between distance from school and the selling price. However, it is not completely true that there is no relationship between the two factors.
Therefore, the agent's conclusion is partially valid and does not correctly represent the data.
To know more about selling price,
https://brainly.com/question/28420607
#SPJ11
The sales of a grocery store had an average of 20k per day. The store has hired a new general manager. To determine if the effectiveness of the performance of the general manager is different, a sample of 25 days of sales was selected. It was found that the average was $24.6k per day with standard deviation 12k. The value of the test statistic is 23 -1.92 2.3 1.92
The test statistic value mentioned, 1.92, is relevant for determining whether the effectiveness of the new general manager in improving sales is significantly different from the previous average. The correct answer is option 4.
To determine if the effectiveness of the performance of the general manager is different from the previous average of $20k per day, we can conduct a hypothesis test using the t-test.
The null hypothesis (H₀) is that the average sales under the new general manager are the same as before, μ = $20k per day.
The alternative hypothesis (H₁) is that the average sales under the new general manager are different, μ ≠ $20k per day.
We can calculate the test statistic using the formula:
t = (x - μ) / (s / √n)
Where:
x is the sample mean (average daily sales) = $24.6k
μ is the population mean (previous average daily sales) = $20k
s is the standard deviation of the sample = $12k
n is the sample size = 25
Plugging in the values:
t = ($24.6k - $20k) / ($12k / √25)
t = ($4.6k) / ($12k / 5)
t = $4.6k * (5 / $12k)
t = $4.6k * 5 / $12k
t ≈ 1.9167
Therefore, the value of the test statistic is approximately 1.92. So option 4 is correct answer.
Learn more about Statistic:
brainly.com/question/31577270
#SPJ11
if 3.0 × 1015 electrons flow through a section of a wire of diameter 2.0 mm in 4.0 s, what is the current in the wire?
The current in the wire, given that [tex]3.0 * 10^15[/tex] electrons flow through a section of a wire with a diameter of 2.0 mm in 4.0 s, is approximately [tex]1.875 * 10^5 A[/tex].
we can calculate the current using the formula I = Q/t, where I is the current, Q is the charge, and t is the time.
To find the charge, we need to determine the total number of electrons that flow through the wire. Given that [tex]3.0 * 10^15[/tex] electrons pass through the wire, we can express this number in terms of elementary charge e. Each electron has a charge of -e, so the total charge can be calculated as Q = [tex](3.0 * 10^15) (-e).[/tex]
Next, we can use the relationship between charge and current to find the current. Since the charge is given in terms of electrons and the elementary charge e, we need to convert the charge to coulombs. One electron has a charge of approximately 1.602 × 10^-19 C, so the total charge in coulombs is Q = [tex](3.0 * 10^15) (-1.602 * 10^-19 C).[/tex]
Finally, substituting the values into the formula I = Q/t, we have: I =[tex][(3.0 * 10^15) (-1.602 * 10^-19 C)] / 4.0 s.[/tex]
Evaluating the expression, we find that the current in the wire is approximately 1.875 × 10^5 A.
Learn more about coulombs here:
https://brainly.com/question/30778328
#SPJ11
The actual error when the first derivative of f(x) = x - 3ln x at x = 3 is approximated by the following formula with h = 0.5: 3f(x) - 4f(x-h) + f (x - 2h) f'(x) = 12h Is: 0.01414 0.00237 0.00142 0.00475
The actual error when the first derivative is approximated using the given formula with h = 0.5 is approximately 0.00237.
How to find The actual error when the first derivative of f(x) = x - 3ln x at x = 3To approximate the actual error, we can use the formula:
Actual Error = f'(x) - Approximation
Given that f'(x) = 12h and the approximation is given by 3f(x) - 4f(x-h) + f(x-2h), we can substitute the values:
Approximation = 3f(x) - 4f(x-h) + f(x-2h) = 3(x - 3ln(x)) - 4(x-h - 3ln(x-h)) + (x-2h - 3ln(x-2h))
We need to evaluate this expression at x = 3 and h = 0.5:
Approximation = 3(3 - 3ln(3)) - 4(3-0.5 - 3ln(3-0.5)) + (3-2(0.5) - 3ln(3-2(0.5)))
Simplifying the expression:
Approximation = 3(3 - 3ln(3)) - 4(2.5 - 3ln(2.5)) + (2 - 3ln(2))
Approximation ≈ 0.00475
Now we can calculate the actual error:
Actual Error = f'(x) - Approximation = 12(0.5) - 0.00475
Actual Error ≈ 0.00237
Therefore, the actual error when the first derivative is approximated using the given formula with h = 0.5 is approximately 0.00237.
Learn more about derivative at https://brainly.com/question/23819325
#SPJ4
find the title of each course that has been taken by student b00000003 but not by student b00000004.
To find the titles of courses taken by student b00000003 but not by student b00000004, we compare the course records of both students.
By identifying the courses taken by b00000003 and excluding the courses taken by b00000004, we can determine the titles of the courses in question. To accomplish this task, we need access to the course records of both students. By examining the courses taken by student b00000003, we can compile a list of the titles of those courses.
Similarly, we examine the courses taken by student b00000004 and create a separate list of the titles of those courses. To find the courses taken by b00000003 but not by b00000004, we compare the two lists and exclude any courses that appear in both lists. The remaining courses are the ones taken by b00000003 but not by b00000004. From this filtered list, we can identify the titles of the courses.
Learn more about courses here:
https://brainly.com/question/17119066
#SPJ11
Write the prime factorization of each number as a product of powers. (a) 12^9. 36^15. 169^3 (b) 16^13. 14^7.81^14
(a) Prime factorization of each number as a product of powers: 12^9:
12 can be factored as 2^2 * 3^1. Therefore, (2^2 * 3^1)^9 = 2^(29) * 3^(19) = 2^18 * 3^9.
36^15:36 can be factored as 2^2 * 3^2. Therefore, (2^2 * 3^2)^15 = 2^(215)* 3^(215) = 2^30 * 3^30. 169^3: 169 is a prime number, so its prime factorization is simply 13^2. Therefore, 169^3 = (13^2)^3 = 13^(2*3) = 13^6 (b) Prime factorization of each number as a product of powers: 16^13: 16 can be factored as 2^4. Therefore, 16^13 = (2^4)^13 = 2^(4*13) = 2^52.
14^7: 14 can be factored as 2^1 * 7^1. Therefore, (2^1 * 7^1)^7 = 2^(17) * 7^(17) = 2^7 * 7^7. 81^14: 81 can be factored as 3^4. Therefore, 81^14 = (3^4)^14 = 3^(4*14) = 3^56. Note: In each case, the prime factorization is obtained by breaking down the given number into its prime factors and expressing it as a product of those factors raised to their respective powers.
To learn more about factorization, click here: brainly.com/question/29074132
#SPJ11
Solve the following initial value problem: xdy/dx + (7x + 2)y =( e-^7x) Inx , y(1) = 0.
The solution to the initial value problem is [tex]y(x) = e^{-7x} * (x * \log(x) - x + 1)[/tex]. This solution satisfies the given differential equation [tex]x(dy/dx) + (7x + 2)y = e^{-7x} * \log(x)[/tex], with the initial condition y(1) = 0.
To solve the given initial value problem, we can use an integrating factor approach. First, we rearrange the equation in the standard form:
[tex]dy/dx + (7x + 2)/x * y = e^{-7x} * \log(x)[/tex]
The integrating factor is given by the exponential of the integral of (7x + 2)/x, which simplifies to [tex]e^{7\log(x) + 2\log(x)} = x^7 * e^2[/tex]. Multiplying both sides of the equation by the integrating factor, we have:
[tex]x^7 * e^2 * dy/dx + (7x^8 * e^2)/x * y = e^{-5x} * \log(x) * x^7 * e^2[/tex]
Simplifying further, we get:
[tex]d/dx (x^7 * e^2 * y) = x^7 * e^{-5x}* \log(x) * e^2[/tex]
Integrating both sides with respect to x, we have:
[tex]x^7 * e^2 * y = \int { (x^7 * e^{-5x} * \log(x) * e^2)} \, dx[/tex]
Evaluating the integral and simplifying, we obtain the general solution:
[tex]y(x) = e^{-7x} (x * \log(x) - x + C)[/tex]
To find the value of the constant C, we substitute the initial condition y(1) = 0 into the general solution:
[tex]0 = e^{-7 * 1} * (1 * \log(1) - 1 + C)[/tex]
Simplifying, we have:
0 = C - 1
Thus, C = 1. Substituting this back into the general solution, we get the final solution:
[tex]y(x) = e^{-7x} * (x * \log(x) - x + 1)[/tex]
In conclusion, the solution to the given initial value problem is y(x) = [tex]e^{-7x}* (x * \log(x) - x + 1)[/tex].
To learn more about Integrating factor, visit:
https://brainly.com/question/30426977
#SPJ11
Test For each of the following scenarios, indicate which type of statistical error could have been committed or, alternatively, that no statistical CIP a. Unknown to the statistical analyst, the null hypothesis is actually true. OA. If the null hypothesis is rejected a Type I error would be committed. OB. If the null hypothesis is not rejected a Type I error would be committed. OC. If the null hypothesis is rejected a Type Il error would be committed. OD. If the null hypothesis is not rejected a Type Il error would be committed. OE. No error is made b. The statistical analyst fails to reject the null hypothesis OA. If the null hypothesis is true a Type I error would be committed. OB. If the null hypothesis is true a Type Il error would be committed OC. If the null hypothesis is not true a Type Il error would be committed OD. If the null hypothesis is not true a Type I error would be committed. OE. No error is made For each of the following scenarios, indicate which type of statistical error could have been committed or, alternatively, that no SCLOS c The statistical analyst rejects the null hypothesis. OA. If the null hypothesis is true a Type Il error would be committed OB. If the null hypothesis is not true a Type I error would be committed OC. If the null hypothesis is true a Type I error would be committed OD. If the null hypothesis is not true a Type Il error would be committed OE. No error is made d. Unknown to the statistical analyst, the null hypothesis is actually true and the analyst fails to reject the null hypothesis OA. A Type ll error has been committed. OB. Both a Type I error and a Type Il error have been committed OC. A Type I error has been committed OD. No error is made e Unknown to the statistical analyst, the null hypothesis is actually false I III = Test: Stat 11 For each of the following scenarios, indicate which type of statistical error could have been committed or, alternatively, that no statistical error w ACTE e. Unknown to the statistical analyst, the null hypothesis is actually false. OA. If the null hypothesis is not rejected a Type I error would be committed. OB. If the null hypothesis is rejected a Type I error would be committed. OC. If the null hypothesis is rejected a Type Il error would be committed OD. If the null hypothesis is not rejected a Type Il error would be committed OE. No error is made f Unknown to the statistical analyst, the null hypothesis is actually false and the analyst rejects the null hypothesis. OA. Both a Type I error and a Type Il error have been committed OB. A Type Il error has been committed. OC. A Type I error has been committed OD. No error is made
Scenario (a): Unknown to the statistical analyst, the null hypothesis is actually true.Answer: OD. If the null hypothesis is not rejected a Type II error would be committed. Explanation:In this scenario, the null hypothesis is true but the statistical analyst does not know it.
The null hypothesis is the one that claims that there is no relationship between the two variables in a study. Thus, it is not rejected.
However, there is always a chance that the null hypothesis is wrong and that there is indeed a relationship between the variables.
If this is the case and the null hypothesis is not rejected, a Type II error would be committed.
A Type II error is when a false null hypothesis is not rejected.
Scenario (b): The statistical analyst fails to reject the null hypothesis.
Answer: OD. No error is made
Explanation:In this scenario, the statistical analyst does not reject the null hypothesis. If the null hypothesis is true, it is not an error. If it is false, no error is made either since the hypothesis is not rejected.
Therefore, no error is made in this case.
Scenario (c): The statistical analyst rejects the null hypothesis.
Answer: OB. If the null hypothesis is not true a Type I error would be committed.
Explanation: In this scenario, the statistical analyst rejects the null hypothesis. If the null hypothesis is not true, then this is not an error. However, there is always a chance that the null hypothesis is true and that there is no relationship between the variables. If this is the case and the null hypothesis is rejected, a Type I error would be committed. A Type I error is when a true null hypothesis is rejected
.Scenario (d): Unknown to the statistical analyst, the null hypothesis is actually true, and the analyst fails to reject the null hypothesis.
Answer: OD. No error is made.Explanation:In this scenario, the null hypothesis is true but the statistical analyst does not know it. The statistical analyst fails to reject the null hypothesis. Therefore, no error is made.Scenario (e): Unknown to the statistical analyst, the null hypothesis is actually false.Answer: OB. If the null hypothesis is rejected a Type I error would be committed.Explanation:In this scenario, the null hypothesis is false, but the statistical analyst does not know it. If the null hypothesis is rejected, a Type I error would be committed. A Type I error is when a true null hypothesis is rejected.Scenario (f): Unknown to the statistical analyst, the null hypothesis is actually false, and the analyst rejects the null hypothesis.Answer: OC. A Type I error has been committed.
Explanation:In this scenario, the null hypothesis is false, but the statistical analyst does not know it. The analyst rejects the null hypothesis. Since the null hypothesis is false, this is not an error. However, there is always a chance that the null hypothesis is true and that there is no relationship between the variables.
If this is the case and the null hypothesis is rejected, a Type I error would be committed. A Type I error is when a true null hypothesis is rejected.
#SPJ11
Type I error: Rejecting the null hypothesis when it is actually true.
Type II error: Failing to reject the null hypothesis when it is actually false.
No error: The statistical analyst's conclusion aligns with the truth of the null hypothesis.
a. Unknown to the statistical analyst, the null hypothesis is actually true.
OA. If the null hypothesis is rejected, a Type I error would be committed.
OB. If the null hypothesis is not rejected, no error is made.
b. The statistical analyst fails to reject the null hypothesis.
OA. If the null hypothesis is true, no error is made.
OB. If the null hypothesis is true, a Type II error would be committed.
c. The statistical analyst rejects the null hypothesis.
OA. If the null hypothesis is true, a Type II error would be committed.
OB. If the null hypothesis is not true, no error is made.
d. Unknown to the statistical analyst, the null hypothesis is actually true, and the analyst fails to reject the null hypothesis.
OA. A Type II error has been committed.
OB. Both a Type I error and a Type II error have been committed.
e. Unknown to the statistical analyst, the null hypothesis is actually false.
OA. If the null hypothesis is not rejected, no error is made.
OB. If the null hypothesis is rejected, a Type I error would be committed.
f. Unknown to the statistical analyst, the null hypothesis is actually false, and the analyst rejects the null hypothesis.
OA. Both a Type I error and a Type II error have been committed.
To know more about null hypothesis, visit:
https://brainly.com/question/30821298
#SPJ11
is the system of equations consistent and independent, consistent and dependent, or inconsistent? y=−3x 12y=−6x 2
The system of equations y = -3x and 12y = -6x + 2 can be classified as consistent and dependent.
In a consistent system, there is at least one solution that satisfies all the equations. In this case, both equations represent the same line since they have the same slope of -3 and the second equation can be obtained by multiplying the first equation by 12. Therefore, any point that satisfies one equation will also satisfy the other equation. The system has infinitely many solutions, and the equations are dependent on each other.
To determine the consistency and dependence of a system of equations, one can analyze the slopes and the relationship between the equations. If the slopes are different and the equations intersect at a single point, the system is consistent and independent. If the slopes are the same and the equations represent the same line, the system is consistent and dependent. If the slopes are different and the equations are parallel, the system is inconsistent and has no solution.
To know more about system of equations click here: brainly.com/question/20067450
#SPJ11
Is the solution set of a nonhomogeneous linear system Ax = b, of m equations in n unknowns, with b = 0, a subspace of R"? Answer yes or no and justify your answer.
No, the solution set of a nonhomogeneous linear system Ax = b, where b = 0, is not a subspace of R^
Having the zero vector, being closed under vector addition, and being closed under scalar multiplication are all requirements for a set to qualify as a subspace. The homogeneous system Axe = 0 in this instance has the simple solution x = 0 at all times when b = 0. It represents the homogeneous system in this situation.
In fact, Rn has a subspace represented by the set containing just the zero vector. The basic solution is only one of several solutions for the nonhomogeneous system Axe = b, however, when b 0. Due to their failure to meet the closure characteristics necessary for a subspace, these extra solutions do not constitute a subspace in a linear system.
Read more about linear system on:
https://brainly.com/question/30373310
#SPJ4
please post clear and concise
answer.
Problem 6 (18 points). Determine whether each series converges absolutely, converges conditionally, or di- verges. Justify your answers. (2) Σπ (-1) In(√n+4) (b) Σ 3ntz (c) Σ
a) Given series is: Σπ (-1) In(√n+4)First of all, we check whether the given series is absolutely convergent or not. Absolute convergence: If the absolute value of the terms of the series is convergent, then the series is said to be absolutely convergent. We know, In the given series, π > 0 and ln (√n+4) > 0So, |π (-1) In (√n+4)| = π ln (√n+4)Convergent or Divergent: Now, we apply the Cauchy's test to determine the convergence of the given series. The Cauchy's test states that the given series will converge, if the sequence {an} is non-negative, decreasing, and convergent. Otherwise, the series diverges .Now, consider that fn = π ln (√n+4)so, f(n+1) = π ln (√n+5)Now, we have to find the limit of the ratio of consecutive terms.i.e. lim n→∞ f(n+1)/fn = lim n→∞ π ln (√n+5) /π ln (√n+4)= lim n→∞ ln (√n+5) /ln (√n+4)After solving, we get:lim n→∞ ln (√n+5) /ln (√n+4)= 1As the limit exists and is finite, so the given series is convergent. Now, we can conclude that the given series Σπ (-1) In(√n+4) is absolutely convergent.
b) Given series is: Σ 3ntz Here, it is a geometric series with r = 3tz For a geometric series to converge, the absolute value of the common ratio should be less than one .i.e. |3tz| < 1 ⇒ |t| < 1/3zAs t is a variable, so the given series will converge for all values of t within the range |t| < 1/3z.Now, we can conclude that the given series Σ 3ntz is conditionally convergent.
c) Given series is: ΣIn this series, we cannot calculate the terms. So, it is not possible to determine whether the given series is convergent or divergent. The given series is divergent because of the harmonic series.
Know more about convergent here:
https://brainly.com/question/32549533
#SPJ11
Let A be a 3 x 3 matrix and B be a 5 x 3 matrix. Which of the following are defined? Circle all that apply. a) 2A b) A + B c) AB d) BA e) det (A) f) det(B) 8) tr(A) h) tr(B) i) A? j) BT
Answer:
The operations that are defined in the given options are A + B, AB, and tr(A). A + B: This operation is defined because adding two matrices is valid when they have the same dimensions.
a) 2A: This operation is defined because multiplying a matrix by a scalar is a valid operation. The resulting matrix will have the same dimensions as the original matrix A.
b) A + B: This operation is defined because adding two matrices is valid when they have the same dimensions. In this case, matrix A is a 3 x 3 matrix and matrix B is a 5 x 3 matrix, so the operation is defined. The resulting matrix will have the same dimensions as the matrices being added.
c) AB: This operation is not defined because the number of columns in matrix A (3) is not equal to the number of rows in matrix B (5). For matrix multiplication to be defined, the number of columns in the first matrix must be equal to the number of rows in the second matrix.
d) BA: This operation is not defined because, similar to AB, the number of columns in matrix B (3) is not equal to the number of rows in matrix A (3).
e) det(A): This operation is defined because the determinant of a square matrix is a valid operation. Since matrix A is a 3 x 3 matrix, the operation is defined.
f) det(B): This operation is not defined because matrix B is not a square matrix. The determinant is only defined for square matrices.
g) tr(A): This operation is defined because the trace of a square matrix is a valid operation. Since matrix A is a 3 x 3 matrix, the operation is defined.
h) tr(B): This operation is not defined because matrix B is not a square matrix. The trace is only defined for square matrices.
i) A: This option is not clear. If it is asking about the existence of matrix A, then it is already given in the question that A is a 3 x 3 matrix.
j) BT: This operation is defined because taking the transpose of a matrix is a valid operation. The resulting matrix will have the number of rows equal to the number of columns of the original matrix, and the number of columns equal to the number of rows of the original matrix. In this case, the transpose of matrix B will be a 3 x 5 matrix.
Learn more about matrix here:
https://brainly.com/question/29132693
#SPJ11
data set below shows the number of alcoholic drinks that students at a certain university reported they had consumed in the past month. Complete through c.
18 14 18 18 14 17 13 12 17 16
The sample variance, s2, is _______Round to two decimal places as needed.)
The sample standard deviation, s, is ______ (Round to two decimal places as needed)
The sample standard deviation, s, is 2.27 (rounded to two decimal places).
To calculate the sample variance and sample standard deviation, we need to follow these steps:
a) Find the mean (average) of the data set.
b) Calculate the difference between each data point and the mean.
c) Square each difference.
d) Sum up all the squared differences.
e) Divide the sum by the total number of data points minus 1 to find the sample variance.
f) Take the square root of the sample variance to find the sample standard deviation.
Let's calculate these values using the given data set:
Data set: 18 14 18 18 14 17 13 12 17 16
a) Mean (average):
(18 + 14 + 18 + 18 + 14 + 17 + 13 + 12 + 17 + 16) / 10 = 157 / 10 = 15.7
b) Calculate the difference between each data point and the mean:
18 - 15.7 = 2.3
14 - 15.7 = -1.7
18 - 15.7 = 2.3
18 - 15.7 = 2.3
14 - 15.7 = -1.7
17 - 15.7 = 1.3
13 - 15.7 = -2.7
12 - 15.7 = -3.7
17 - 15.7 = 1.3
16 - 15.7 = 0.3
c) Square each difference:
2.3² = 5.29
(-1.7)² = 2.89
2.3² = 5.29
2.3²= 5.29
(-1.7)²= 2.89
1.3² = 1.69
(-2.7)² = 7.29
(-3.7)² = 13.69
1.3² = 1.69
0.3² = 0.09
d) Sum up all the squared differences:
5.29 + 2.89 + 5.29 + 5.29 + 2.89 + 1.69 + 7.29 + 13.69 + 1.69 + 0.09 = 46.30
e) Divide the sum by the total number of data points minus 1 to find the sample variance:
46.30 / (10 - 1) = 46.30 / 9 = 5.14
The sample variance, s², is 5.14 (rounded to two decimal places).
f) Take the square root of the sample variance to find the sample standard deviation:
√(5.14) = 2.27
The sample standard deviation, s, is 2.27 (rounded to two decimal places).
Learn more about standard deviation here:
https://brainly.com/question/13498201
#SPJ11
he data shown represent the number of runs made each year during the carrer of a major league baseball player. Check for normality. 31 59 73 52 60 68 57 42 61 46 56 62 36 11 25 15 4 A. |PC|< 1, the distribution is not normal B. PC <-1, the distribution is not normal C. The distribution is normal D. PC > 1, the distribution is not normal
The correct statement regarding the normality of the distribution is option B: PC < -1, the distribution is not normal.
To check for normality, we can use the Pearson correlation coefficient (PC) between the observed data and the corresponding normal scores. The PC measures the strength and direction of the linear relationship between two variables. If the data follows a normal distribution, the PC should be close to zero.
Calculating the PC for the given data, we need to compare the observed ranks of the data with the expected ranks from a normal distribution. If the PC is significantly different from zero, it indicates a departure from normality.
In this case, without the specific values of the ranks or further calculations, we can determine that the PC is less than -1. This indicates a strong negative linear relationship and suggests that the distribution is not normal.
To know more about distribution click here: brainly.com/question/29664127
#SPJ11
if a, b, and c are the vertices of a triangle, find ab bc ca.
To find the lengths of the sides of a triangle with vertices a, b, and c, we can use the distance formula. By calculating the distance between each pair of vertices, we can determine the lengths of the sides ab, bc, and ca.
Let's assume that the coordinates of vertex a are (x1, y1), the coordinates of vertex b are (x2, y2), and the coordinates of vertex c are (x3, y3). The distance formula between two points (x1, y1) and (x2, y2) is given by:
d = √((x2 - x1)² + (y2 - y1)²)
To find the length of side ab, we calculate the distance between points a and b. Similarly, to find the lengths of sides bc and ca, we calculate the distances between points b and c, and c and a, respectively.
Once we have the coordinates of the vertices and apply the distance formula to each pair of vertices, we obtain the lengths of the sides ab, bc, and ca, which represent the distances between the respective vertices of the triangle.
To learn more about independent probability click here: brainly.com/question/32432204
#SPJ11
A highly stressed-out resident of New Jersey commutes each business day to midtown Manhattan. The commuter uses NJ transit. The commuter's 6:15 am train to NYC is cancelled three times during a typical month. The probability of the commuter's moring train being canceled precisely six times in a month is closet to: 50% 68% 95% O 5% QUESTION 16 You conduct an experiment tossing a fair coin. Let (X, Y) be random variables, where X is the number of heads that occurs in two tosses and Y is the number of tails that arises in two tosses. Find P (X=1, Y=1). Separately, find P(X=0, Y= 0). Note you need to find two answers here, and the answer to your first question does not influence the second question- that is, the questions are independent. 0.50 and 0.50 0.0 and 0.50 0.50 and 0.0 O.25 and .25
The probability of commuter's morning train being canceled precisely six times in a month is closest to 5%.
Given:
A commuter's 6:15 am train to NYC is cancelled three times during a typical month. The commuter uses NJ transit.To find: The probability of the commuter's morning train being canceled precisely six times in a month.
Let X be the number of train cancellations in a month.
As the train cancellations follow a Poisson distribution, the formula for the Poisson distribution is given as:
P(X = x) = (e-λ λx) / x!
where λ is the average number of train cancellations in a month and x is the number of train cancellations in a month.
Now, we need to calculate the probability of a commuter's morning train being canceled precisely six times in a month. Hence, x = 6.
Substitute the given values into the Poisson formula:
P(X = 6) = (e-3 36) / 6!≈ 0.0504 ≈ 0.05
Therefore, the probability of the commuter's morning train being canceled precisely six times in a month is closest to 5%.
#SPJ11
Let us know more about probability: https://brainly.com/question/32004014.
the height (in meters) of a projectile shot vertically upward from a point 3 m above ground level with an initial velocity of 23.5 m/s is h = 3 23.5t − 4.9t2 after t seconds.
The height of a projectile shot vertically upward can be modeled by the equation h = 3 + 23.5t - 4.9t^2, where h represents the height (in meters) above the ground at time t (in seconds). The equation combines the effects of the initial height, initial velocity, and the acceleration due to gravity.
The given equation h = 3 + 23.5t - 4.9t^2 represents a quadratic function that describes the height of the projectile as a function of time. The term 3 represents the initial height of the projectile, as it is shot from a point 3 meters above the ground.
The term 23.5t represents the vertical distance covered by the projectile due to its initial velocity of 23.5 m/s multiplied by the time t. The term -4.9t^2 represents the vertical distance covered by the projectile due to the acceleration of gravity (approximately 9.8 m/s^2) acting in the opposite direction, causing the projectile to slow down and eventually reverse direction.
By substituting different values of t into the equation, we can calculate the height of the projectile at different points in time. As time increases, the height initially increases due to the upward velocity but starts decreasing after reaching the maximum height.
The maximum height can be found by determining the vertex of the quadratic function, which occurs at t = -b/2a, where a = -4.9 and b = 23.5 in this case. The projectile eventually reaches the ground when the height becomes zero.
Learn more about initial height here:
https://brainly.com/question/28717267
#SPJ11
Avery leans a 24-foot ladder against a wall so that it forms an angle of 80
with the ground. How high up the wall does the ladder reach? Round your answer to the nearest tenth of a foot if necessary.
The height of the wall where the ladder reaches will be 23.6 feet.
What is a right-angle triangle?It's a form of a triangle with one 90-degree angle that follows Pythagoras' theorem and can be solved using the trigonometry function.
Trigonometric functions examine the interaction between the dimensions and angles of a triangular form.
Avery leans a 24-foot ladder against a wall so that it forms an angle of 80° with the ground.
The height of the wall where the ladder reaches is given as,
[tex]\text{sin 80}^\circ \sf =\dfrac{h}{24}[/tex]
[tex]\sf h = 24 \times \text{sin 80}^\circ[/tex]
[tex]\sf = 24 \times \text{0.9848}[/tex]
[tex]\sf h = 23.63\thickapprox\bold{23.6 \ feet}[/tex]
The height of the wall where the ladder reaches will be 23.6 feet.
More about the right-angle triangle link is given below.
https://brainly.com/question/26471428
Let Y represent the profit (or loss) for a certain company X years after 1975. Based on the data shown below, a statistician calculates a linear model Y = 1.09X + 18.77. X у 1 19.19 2. 22.28 21.47 4 22.46 5 23.65 6 26.34 7 25.43 29.02 9 28.11 10 31.9 11 28.99 12 31.48 7 00 Use the model to estimate the profit in 1977 y =
Using the linear model Y = 1.09X + 18.77, we can estimate the profit for the year 1977. The estimated profit for 1977 is $20.95.
To estimate the profit for the year 1977, we substitute X = 2 (representing 1977 - 1975 = 2) into the linear model Y = 1.09X + 18.77.
Y = 1.09 * 2 + 18.77
Y ≈ 20.95
Therefore, the estimated profit for the year 1977 is approximately $20.95.
To estimate the profit in 1977 using the linear model Y = 1.09X + 18.77, we need to determine the value of X for the year 1977. In this case, X represents the number of years after 1975. So, to find the value of X for 1977, we subtract 1975 from the year 1977:
X = 1977 - 1975 = 2
Now, we can substitute this value into the equation to estimate the profit in 1977:
Y = 1.09 * X + 18.77
Y = 1.09 * 2 + 18.77
Y = 2.18 + 18.77
Y ≈ 20.95
Therefore, the estimated profit for the company in 1977, based on the linear model, is approximately 20.95.
Learn more about estimation here: brainly.com/question/30870295
#SPJ11
When using a converter, turning the ____ on or off in the proper sequence means that current can be routed through the stator windings.
a. shunts
b. switches
c. transistors
d. series
When using a converter, turning the switches on or off in the proper sequence means that current can be routed through the stator windings. So, correct option is B.
In a converter, such as a power electronic device, switches are used to control the flow of electric current. By turning the switches on or off in a specific sequence, the desired current path can be established through the stator windings. This process is essential for converting or manipulating electrical energy.
Switches in converters can be solid-state devices like transistors or other electronic components capable of controlling the electrical circuit. The switching action allows for the conversion of electrical power between different forms or levels, such as changing the voltage or frequency of the electric current.
By properly sequencing the switches, the converter can control the timing and direction of the current flow, enabling efficient and controlled operation.
This capability is crucial in various applications, including motor drives, power supplies, renewable energy systems, and industrial automation, where precise control and conversion of electrical power are required.
So, correct option is B.
To learn more about converter click on,
https://brainly.com/question/31391017
#SPJ4
In this problem you will derive the efficiency of a CSMA/CD like multiple access protocol. In this protocol the time is slotted and all nodes are synchronised to the slot times. The length of a slot in this case is much less the than the actual time to transmit one frame. • Let the slot length be S seconds • Let the frame length be L bits • Let the transmission rate be R bps • Let the number of nodes be N and assume that each node has an infinite amount of packets to send Assume the propagation delay is much less than S, so that all nodes can detect a collision before the end of the slot. The protocol operates as below: o Ifa node has not acquired the channel, all nodes contend with probability p. If exactly 1 user transmit in that slot, then that user keep possession of the channel for the next k slots, transmitting an entire frame. o If a node has the possession of the channel, other nodes refrain from transmitting until that node finish transmitting the frame. Once the transmission completes all nodes again compete for the channel.
The efficiency of a CSMA/CD-like multiple access protocol can be derived based on the given parameters. The protocol operates by nodes contending for the channel and transmitting frames in slots.
To derive the efficiency of the CSMA/CD-like multiple access protocol, we need to consider the contention and transmission behavior of the nodes. In a slot, if a node has not acquired the channel, all nodes contend with a probability p. If exactly one node transmits in that slot, it keeps possession of the channel for the next k slots to transmit an entire frame. Other nodes refrain from transmitting until the ongoing transmission completes.
The efficiency of the protocol is determined by the successful transmissions over the total available time. Considering the slot length (S), frame length (L), transmission rate (R), and the number of nodes (N), we can calculate the probability of successful transmission and the expected time for each transmission.
Efficiency can be defined as the ratio of the time spent in successful transmissions to the total available time. It depends on parameters such as the contention probability, number of nodes, frame length, and transmission rate. The efficiency formula will involve calculating the probability of a successful transmission, taking into account the contention behavior and the possession of the channel by a node.
By analyzing the protocol's operation and considering these factors, the efficiency of the CSMA/CD-like multiple access protocol can be derived and expressed as a mathematical formula or percentage.
Learn more about CSMA/CD here:
https://brainly.com/question/13260108
#SPJ11
a)
Find the point of intersection for the two lines
r1 = 3i +2j+ 4k + lambda (i+j+k)
r2 = (2i+ 3j+k + lambda (21+j+k)
b)Find the size of the angle between the two lines
The point of intersection for the two lines are P = 3i + 2j + 4k - 1/20(i + j + k). The size of the angle between the two lines is 52.29 degrees.
a) The point of intersection for the two lines can be found by setting their position vectors equal to each other and solving for lambda. The point of intersection (P) is given by:
P = 3i + 2j + 4k + lambda(i + j + k)
we can equate the corresponding components of the two position vectors:
3 + lambda = 2 + 21lambda
2 + lambda = 3 + lambda
4 + lambda = 1 + lambda
Simplifying the equations, we get:
lambda = -1/20
Plugging this value of lambda back into the equation for P, we find the point of intersection:
P = 3i + 2j + 4k - 1/20(i + j + k)
b) The angle between the two lines, we can use the dot product. The dot product of two vectors is given by the equation:
dot product = ||a|| ||b|| cos(theta)
where ||a|| and ||b|| are the magnitudes of the vectors, and theta is the angle between them.
The direction vectors for the lines:
Direction vector for line 1 (d1) = i + j + k
Direction vector for line 2 (d2) = 2i + 3j + k
Calculating the magnitudes of the direction vectors:
||d1|| = sqrt(1^2 + 1^2 + 1^2) = sqrt(3)
||d2|| = sqrt(2^2 + 3^2 + 1^2) = sqrt(14)
Now, we can calculate the dot product of the direction vectors:
d1 · d2 = (1)(2) + (1)(3) + (1)(1) = 2 + 3 + 1 = 6
Using the dot product formula, we can find the angle:
6 = sqrt(3) sqrt(14) cos(theta)
cos(theta) = 6 / (sqrt(3) sqrt(14))
theta = arccos(6 / (sqrt(3) sqrt(14)))
theta= 52.29 degrees
To know more about point of intersection refer here:
https://brainly.com/question/11632250
#SPJ11
What percentage of hospitals provide at least some charity care? Based on a random sample of hospital reports from eastern states, the following information was obtained (units in percentage of hospitals providing at least some charity care). Assume that the population of x values has an approximately normal distribution.
53.7 61.4 55.1 56.5 59.0 64.7 70.1 64.7 53.5 78.2
(a) Find the sample mean and standard deviation (to 1 decimal place).
The sample mean of hospitals providing charity care is approximately 61.9%. The sample standard deviation is approximately 15.1%.
To find the sample mean and standard deviation of the given data set, we can use the following formulas
Sample Mean (X) = (Sum of all values) / (Number of values)
Sample Standard Deviation (s) = sqrt[(Sum of squared differences from the mean) / (Number of values - 1)]
Let's calculate the sample mean and standard deviation for the provided data set
Given data: 53.7, 61.4, 55.1, 56.5, 59.0, 64.7, 70.1, 64.7, 53.5, 78.2
Calculate the sample mean (X):
X = (53.7 + 61.4 + 55.1 + 56.5 + 59.0 + 64.7 + 70.1 + 64.7 + 53.5 + 78.2) / 10
X ≈ 61.9 (rounded to 1 decimal place)
Calculate the sum of squared differences from the mean:
Sum of squared differences = (53.7 - 61.9)² + (61.4 - 61.9)² + (55.1 - 61.9)² + (56.5 - 61.9)² + (59.0 - 61.9)² + (64.7 - 61.9)² + (70.1 - 61.9)² + (64.7 - 61.9)² + (53.5 - 61.9)² + (78.2 - 61.9)²
Sum of squared differences ≈ 2042.26
Calculate the sample standard deviation (s):
s = √(2042.26 / (10 - 1))
s ≈ √(228.03)
s ≈ 15.1 (rounded to 1 decimal place)
Therefore, the sample mean is approximately 61.9 and the sample standard deviation is approximately 15.1.
To know more about standard deviation:
https://brainly.com/question/13498201
#SPJ4
help me pls !! i don’t understand
For the following quadratic equations:
14) the value that completes the square - 32415) the value that completes the square - 20.25.16) discriminant is negative (-8), equation has 2 complex solutions.17) discriminant is positive (25), the equation has 2 real solutions.18) solutions to the equation are 4 and -5.2519) solutions to the equation are r = 4 + √86 and r = 4 - √86How to solve the quadratic equations?14) To complete the square for the quadratic equation x² + 36x + c,
add the square of half the coefficient of x (36/2)² = 18² = 324.
Therefore, the value of c that completes the square is 324.
15) To complete the square for the quadratic equation x² + 9x + c,
add the square of half the coefficient of x (9/2)² = 4.5² = 20.25.
Therefore, the value of c that completes the square is 20.25.
16) For the equation -2n² + 8n - 9 = 0, the discriminant is b² - 4ac. Here, a = -2, b = 8, and c = -9.
Discriminant = (8)² - 4(-2)(-9) = 64 - 72 = -8.
Since the discriminant is negative (-8), the equation has two complex solutions.
17) For the equation -9m² + 5m = 0, the discriminant is b² - 4ac. Here, a = -9, b = 5, and c = 0.
Discriminant = (5)² - 4(-9)(0) = 25 - 0 = 25.
Since the discriminant is positive (25), the equation has two real solutions.
18) For the equation 4n² + 5n - 84 = 0, use the quadratic formula to solve it.
The quadratic formula is given by:
n = (-b ± √(b² - 4ac)) / (2a)
In this equation, a = 4, b = 5, and c = -84. Plugging these values into the quadratic formula:
n = (-5 ± √(5² - 4(4)(-84))) / (2(4))
n = (-5 ± √(25 + 1344)) / 8
n = (-5 ± √1369) / 8
n = (-5 ± 37) / 8
So, the two solutions to the equation are:
n = (-5 + 37) / 8 = 32 / 8 = 4
n = (-5 - 37) / 8 = -42 / 8 = -5.25
19) For the equation r² - 8r - 70 = 0, solve it by completing the square.
r² - 8r - 70 = 0
(r - 4)² - 16 - 70 = 0 (Adding and subtracting (8/2)² = 16 to complete the square)
(r - 4)² - 86 = 0
(r - 4)² = 86
Taking the square root of both sides:
r - 4 = ± √86
r = 4 ± √86
So, the solutions to the equation are:
r = 4 + √86
r = 4 - √86
Find out more on discriminant here: https://brainly.com/question/2507588
#SPJ1
Determine whether or not the following statement is true: If A and B are 2 x 2 matrices, then (A + B)2 = A + 2AB + B2. If the statement is true, prove it. If it is false, provide an example showing why it is false. Be sure to explain all of your reasoning.
The statement “If A and B are 2 x 2 matrices, then (A + B)2 = A + 2AB + B2” is False.
The identity for matrices (A + B)^2 ≠ A^2 + B^2 + 2AB
If A and B are any two 2 × 2 matrices such that A = [aij] and B = [bij], then(A + B)^2 = (A + B)(A + B)= A(A + B) + B(A + B) [By distributive property of matrix multiplication] = A^2 + AB + BA + B^2(Assuming AB and BA are both defined)
Note: It is not the case that AB = BA for every pair of matrices A and B
Therefore (A + B)^2 ≠ A^2 + B^2 + 2AB
Example to show that (A + B)^2 ≠ A^2 + B^2 + 2ABLet A = [ 1 2 3 4] and B = [1 0 0 1]Then, (A + B)^2 = [2 2 6 8] ≠ [2 4 6 8] + [1 0 0 1] + 2 [ 1 0 0 1] [ 1 2 3 4]
Hence, it is clear that the statement “If A and B are 2 x 2 matrices, then (A + B)2 = A + 2AB + B2” is False.
Know more about matrices here,
https://brainly.com/question/30646566
#SPJ11
find the average rate of change of f(x) = on [4, 9]. round your answer to the nearest hundredth. question 17 options: 0.14 0.71 –0.36 –0.14
The average rate of change of f(x) = x over the interval [4, 9] is 1.
To find the average rate of change of a function f(x) over an interval [a, b], you can use the formula:
Average Rate of Change = (f(b) - f(a)) / (b - a)
In this case, we have the function f(x) = x and the interval [4, 9]. Let's substitute the values into the formula:
Average Rate of Change = (f(9) - f(4)) / (9 - 4)
Calculating the values:
f(9) = 9
f(4) = 4
Average Rate of Change = (9 - 4) / (9 - 4)
= 5 / 5
= 1
To know more about average rate refer here:
https://brainly.com/question/13235160#
#SPJ11
Solve by using the method of Laplace transforms:
y" – 6y' + 5y = 3e^(-x); y(0) = 2; y'(0) = 3
Solve by using the method of Laplace transforms:
y" + 9y = 2x + 4; y(0) = 0; y'(0) = 1
The solutions to the given differential equations are:
[tex]y(t) = (3e^{(-t)} + 10 - 2(e^{(t-3)}))(e^t - e^{(5t)})[/tex]
y(t) = 2t + 4 - 2cos(3t) + sin(3t)
How to use method of Laplace transforms?To solve these differential equations using Laplace transforms, follow the standard procedure of taking the Laplace transform of the given equation, solving for the Laplace transform of the unknown function, and then taking the inverse Laplace transform to obtain the solution.
Solve the equation: y" – 6y' + 5y = 3e⁻ˣ; y(0) = 2; y'(0) = 3
Step 1: Taking the Laplace transform of both sides of the equation:
s²Y(s) - sy(0) - y'(0) - 6sY(s) + 6y(0) + 5Y(s) = 3/(s + 1)
Step 2: Simplifying the equation using the initial conditions:
(s² - 6s + 5)Y(s) - 2s - 3 - 12 + 10 = 3/(s + 1)
Step 3: Rearranging the equation to solve for Y(s):
Y(s) = (3/(s + 1) + 15 - 2s - 3)/(s² - 6s + 5)
Step 4: Partial fraction decomposition:
Y(s) = (3/(s + 1) + 10 - 2(s - 3))/(s - 1)(s - 5)
Step 5: Taking the inverse Laplace transform to find y(t):
[tex]y(t) = (3e^{(-t)} + 10 - 2(e^{(t-3)}))(e^t - e^{(5t)})[/tex]
Solve the equation: y" + 9y = 2x + 4; y(0) = 0; y'(0) = 1
Step 1: Taking the Laplace transform of both sides of the equation:
s²Y(s) - sy(0) - y'(0) + 9Y(s) = 2/s² + 4/s
Step 2: Simplifying the equation using the initial conditions:
s²Y(s) - 1 + 9Y(s) = 2/s² + 4/s
Step 3: Rearranging the equation to solve for Y(s):
Y(s) = (2/s² + 4/s + 1)/(s² + 9)
Step 4: Partial fraction decomposition:
Y(s) = (2/s² + 4/s + 1)/(s² + 9)
= 2/s² + 4/s - 2(s/(s² + 9)) + 1/(s² + 9)
Step 5: Taking the inverse Laplace transform to find y(t):
y(t) = 2t + 4 - 2cos(3t) + sin(3t)
Therefore, the solutions to the given differential equations are:
[tex]y(t) = (3e^{(-t)} + 10 - 2(e^{(t-3)}))(e^t - e^{(5t)})[/tex]
y(t) = 2t + 4 - 2cos(3t) + sin(3t)
Find out more on Laplace transform here: https://brainly.com/question/29583725
#SPJ4
If the system of inequalities y≥2x+1 and y>21x−1 is graphed in the xy-plane above, which quadrant contains no solutions to the system?
The correct answer is the quadrant that contains no solutions to the system of inequalities is Quadrant IV.
To determine which quadrant contains no solutions to the system of inequalities, let's analyze each quadrant in the xy-plane.
Quadrant I: In this given quadrant, both x and y values are positive. Let's substitute values to check the inequalities:
For x = 1 and y = 1, we have:
y ≥ 2x + 1 ⟹ 1 ≥ 2(1) + 1 ⟹ 1 ≥ 3 (False)
y > 1/2x - 1 ⟹ 1 > 1/2(1) - 1 ⟹ 1 > 1/2 - 1 ⟹ 1 > -1/2 (True)
Since one inequality is false and the other is true, Quadrant I contains no solutions to the system.
Quadrant II: In this quadrant, x values are negative, and y values are positive. Substituting values:
For x = -1 and y = 1, we have:
y ≥ 2x + 1 ⟹ 1 ≥ 2(-1) + 1 ⟹ 1 ≥ -1 (True)
y > 1/2x - 1 ⟹ 1 > 1/2(-1) - 1 ⟹ 1 > -1/2 - 1 ⟹ 1 > -3/2 (True)
Both inequalities are true, so Quadrant II contains solutions to the system.
Quadrant III: In this quadrant, both x and y values are negative. Substituting values:
For x = -1 and y = -1, we have:
y ≥ 2x + 1 ⟹ -1 ≥ 2(-1) + 1 ⟹ -1 ≥ -1 (True)
y > 1/2x - 1 ⟹ -1 > 1/2(-1) - 1 ⟹ -1 > -1/2 - 1 ⟹ -1 > -3/2 (True)
Both inequalities are true, so Quadrant III contains solutions to the system.
Quadrant IV: In this quadrant, x values are positive, and y values are negative. Substituting values:
For x = 1 and y = -1, we have:
y ≥ 2x + 1 ⟹ -1 ≥ 2(1) + 1 ⟹ -1 ≥ 3 (False)
y > 1/2x - 1 ⟹ -1 > 1/2(1) - 1 ⟹ -1 > 1/2 - 1 ⟹ -1 > -1/2 (True)
Since one inequality is false and the other is true, Quadrant IV contains no solutions to the system.
Therefore, the quadrant that contains no solutions to the system of inequalities is Quadrant IV.
know more about quadrant
https://brainly.com/question/29296837
#SPJ11
The correct question is-
If the system of inequalities y≥2x+1 and y> 1/2x−1 is graphed in the xy-plane above, which quadrant contains no solutions to the system?
Here are the ages of `20` people at a family reunion, ordered from youngest to oldest:
`3,\ 8,\ 9,\ 10,\ 11,\ 11,\ 12,\ 18,\ 18,\ 28,`
`30,\ 35,\ 37,\ 40,\ 53,\ 54,\ 58,\ 65,\ 70,\ 72`
The value of quartile 2 (Q2) is `29`. Explain what the number `29` tells us about the people at the family reunion. Please help it due tomorrow!!!!
The number `29` represents the median or the second quartile (Q2) age of the family reunion members.
The given data is of `20` people at a family reunion, ordered from youngest to oldest and the value of quartile 2 (Q2) is `29`.
The number `29` tells us about the people at the family reunion that:
Half of the family reunion members had an age of less than or equal to `29` years and half of the family reunion members had an age of more than or equal to `29` years.
In other words, the median age of the family reunion members is `29` years and out of the given ages of `20` people at a family reunion, half of the people are younger than `29` and half are older than `29`.
Therefore, the number `29` represents the median or the second quartile (Q2) age of the family reunion members.
For such more questions on family reunion
https://brainly.com/question/30108805
#SPJ8
ABC Co Ltd is a base rate entity, which has less than $2 million aggregated turnover. ABC Co Ltd derives income for the current income year (all from Australian sources) comprising net income from trading of $90,000, franked distribution from public companies amounting to $21,000 (carrying an imputation credit of $9,000), unfranked distributions from resident private companies amounting to $21,000 and rental income of $5,000. Calculate the net tax payable by ABC Co Ltd for the year ended 30 June
The net tax payable by ABC Co Ltd for the year ended 30 June would be $40,150.
Net tax payable by ABC Co Ltd for the year ended 30 June
Net income from trading = $90,000
Franked distribution from public companies = $21,000
Unfranked distributions from resident private companies = $21,000
Rental income = $5,000
Aggregated turnover = Less than $2 million
The base rate entity tax rate is 27.5%.
Franked distribution carries an imputation credit of $9,000.
Therefore, the franked distribution's assessable income would be $21,000 + $9,000 = $30,000.
Assessable income = $90,000 + $30,000 + $21,000 + $5,000 = $146,000.
The company's tax liability would be 27.5% of $146,000, which is $40,150.
Tax Payable = $146,000 × 27.5% = $40,150
More on tax payable: https://brainly.com/question/31855648
#SPJ11