Consider triangles that can be formed with one angle measure of 20° , another angle measure of 60° , and one side measure of 7 cm . Which sketches of triangles satisfy these conditions? Select all that apply.

The statement that is true is d. both b and c.

The interquartile range is resistant to extreme values, and the median is also resistant to extreme values.

The following are the definitions of the terms:

Standard deviation is a measure that calculates how much the individual data points vary from the mean value of a dataset.

A low standard deviation indicates that the data points are close to the mean value, whereas a high standard deviation indicates that the data points are spread out over a wider range. It is not resistant to outliers and extreme values.

The interquartile range is the difference between the upper quartile and the lower quartile. In other words, it is the range of the middle 50% of data points. The interquartile range is not affected by outliers and is thus a resistant measure of variability.

The median is the middle value of a dataset when the values are arranged in order from least to greatest. It is not affected by outliers and is thus a resistant measure of central tendency.

To learn more about interquartile, refer below:

https://brainly.com/question/29173399

#SPJ11

The probability of tranquility, or not having an emergency, for the staff in the hospital intensive care unit is 0.642, or 64.2%.

The probability of tranquility, or no emergency, can be calculated by subtracting the probability of an emergency from 1.

Given that the probability of an emergency is 0.358, the probability of tranquility is:

Probability of tranquility = 1 - Probability of an emergency

= 1 - 0.358

= 0.642

Therefore, the probability of tranquility, or not having an emergency, for the staff in the hospital intensive care unit is 0.642, or 64.2%.

Learn more about probability here:

https://brainly.com/question/251701

#SPJ11

On the coordinate plane above, the coordinate of the labeled points include the following:

40. A (2, 7)

41. B (-4, 6)

43. D (-3, 3)

44. E (0, 2)

45. F (-5, 7).

The coordinates of the points are shown in the graph attached below.

In Mathematics and Geometry, an ordered pair is sometimes referred to as a coordinate and it can be defined as a pair of two (2) elements or data points that are commonly written in a fixed order within parentheses as (x, y), which represents the x-coordinate (abscissa) and the y-coordinate (ordinate) on the coordinate plane of any graph.

Based on the cartesian coordinate plane (grid) shown above, the coordinate points should be identified as follows;

A (2, 7)

B (-4, 6)

D (-3, 3)

E (0, 2)

F (-5, 7).

In conclusion, the coordinates of the given points are shown in the graph attached below.

Read more on ordered pair here: brainly.com/question/25462418

#SPJ1

The volume of salt water in million cubic kilometers would be: 1330.56 million cubic meters.

From the figures given, we are first told that the total volume of water on earth is 1386 million cubic kilometers. 96% of this figure is salt water. So, to know the exact amount this constitutes from the orginal figure, we will do 96% of 1386 million cubic meters.

The result is 1330.56 million cubic meters. So, the total volume of salt water in million cubic meters is 1330.56.

Learn more about percentages here:

https://brainly.com/question/24877689

#SPJ4

Given, z is a standard normal random variable, the area to the right of z is 0.9803. It implies the area to the left of z is `1 - 0.9803 = 0.0197`. So, the correct option is: -2.06.

Since z is a standard normal random variable. By using a standard normal table, we find that the z-value corresponding to the area 0.0197 is -2.06.

The standard normal random variable z-value for the given problem is `-2.06`. Therefore, the correct answer is: option -2.06.

Note: The standard normal table (also called the z-score table) shows the area under the standard normal distribution curve between the mean and a specific z-score.

For more questions on: random variable

https://brainly.com/question/14356285

#SPJ8

This function f(x) = (2x + 1) / (3x) is not one-to-one.

Suppose we have two distinct elements a and b in the domain of the function f such that f(a) = f(b). We must demonstrate that this implies

a = b. In this case, we have f(a) = f(b) implies

(2a + 1)/(3a) = (2b + 1)/(3b)

Now cross-multiplying and simplifying, we get:

2ab + b = 2ab + a3b/3a => 3a(2ab + b)

= 3b(2ab + a)

=> 6a²b + 3ab

= 6b²a + 3ab

=> 6a²b

= 6b²a => a = b

If the above equation is valid for some pair of values (a,b), then f is not one-to-one because it maps two different domain values to the same range value. Therefore, the function f(x) = (2x + 1) / (3x) is not one-to-one.

You can learn more about one-to-one function at: brainly.com/question/18154364

#SPJ11

a) A measure of the outcome of a decision such as profit, cost, or time is known as a payoff.

b) Chance nodes are nodes indicating points where a decision is made.

a) A measure of the outcome of a decision, such as profit, cost, or time, is referred to as a payoff. It represents the result or consequence associated with a particular choice or action.

Payoffs are used to evaluate the effectiveness or success of a decision-making process and can be quantified in various ways depending on the specific context.

b) On the other hand, chance nodes are nodes in decision trees or probabilistic models that represent points where a decision is made or an uncertain event occurs.

These nodes provide branches or paths for different possible outcomes, allowing for analysis and evaluation of decision options under uncertain conditions.

To know more about payoff refer here:

https://brainly.com/question/31726986#

#SPJ11

The general solution to the differential equation is y(x) = c1 × [tex]e^{(r1 * x)[/tex] + c2 × [tex]e^{(r2 * x)[/tex] + A × x × [tex]e^{(-2x)[/tex]

To solve the given differential equation, let's proceed step by step.

Step 1: Characteristic Equation

The first step is to find the characteristic equation associated with the homogeneous part of the differential equation, which is obtained by setting the right-hand side (RHS) equal to zero. The characteristic equation is given by:

r² - 2r - 2 = 0

Step 2: Solve the Characteristic Equation

To solve the characteristic equation, we can use the quadratic formula:

r = (-b ± √(b² - 4ac)) / 2a

Plugging in the values from our characteristic equation, we have:

r = (-(-2) ± √((-2)² - 4(1)(-2))) / (2(1))

= (2 ± √(4 + 8)) / 2

= (2 ± √12) / 2

= (2 ± 2√3) / 2

Simplifying further, we get two distinct roots:

r1 = 1 + √3

r2 = 1 - √3

Step 3: Form the Homogeneous Solution

The homogeneous solution is given by:

[tex]y_h[/tex](x) = c1 × [tex]e^{(r1 * x)[/tex] + c2 × [tex]e^{(r2 * x)[/tex]

where c1 and c2 are constants to be determined.

Step 4: Particular Solution

To find a particular solution, we need to consider the RHS of the original differential equation. It is 12[tex]e^{(-2x)[/tex], which is a product of a constant and an exponential function with the same base as the homogeneous solution. Therefore, we assume a particular solution of the form:

[tex]y_p[/tex](x) = A × x × [tex]e^{(-2x)[/tex]

where A is a constant to be determined.

Step 5: Calculate the Derivatives

We need to calculate the first and second derivatives of [tex]y_p[/tex](x) to substitute them back into the original differential equation.

[tex]y_p[/tex]'(x) = A × (1 - 2x) × [tex]e^{(-2x)[/tex]

[tex]y_p[/tex]''(x) = A × (4x - 3) × [tex]e^{(-2x)[/tex]

Step 6: Substitute into the Differential Equation

Now, substitute [tex]y_p[/tex](x), [tex]y_p[/tex]'(x), and [tex]y_p[/tex]''(x) into the differential equation:

[tex]y_p[/tex]''(x) - 2[tex]y_p[/tex]'(x) - 2[tex]y_p[/tex](x) = 12[tex]e^{(-2x)[/tex]

A × (4x - 3) × [tex]e^{(-2x)[/tex]- 2A × (1 - 2x) × [tex]e^{(-2x)[/tex] - 2A × x × [tex]e^{(-2x)[/tex] = 12[tex]e^{(-2x)[/tex]

Step 7: Simplify and Solve for A

Simplifying the equation, we have:

A × (4x - 3 - 2 + 4x) × [tex]e^{(-2x)[/tex] = 12[tex]e^{(-2x)[/tex]

A × (8x - 5) × [tex]e^{(-2x)[/tex] = 12[tex]e^{(-2x)[/tex]

Dividing both sides by [tex]e^{(-2x)[/tex] (which is nonzero), we get:

A × (8x - 5) = 12

Solving for A, we find:

A = 12 / (8x - 5)

Step 8: General Solution

Now that we have the homogeneous solution ([tex]y_h[/tex](x)) and the particular solution ([tex]y_p[/tex](x)), we can write the general solution to the differential equation as:

y(x) = [tex]y_h[/tex](x) + [tex]y_p[/tex](x)

= c1 × [tex]e^{(r1 * x)[/tex] + c2 × [tex]e^{(r2 * x)[/tex] + A × x × [tex]e^{(-2x)[/tex]

where r1 = 1 + √3, r2 = 1 - √3, and A = 12 / (8x - 5).

That's the general solution to the given differential equation.

Learn more about the general solution at

https://brainly.com/question/32062078

#SPJ4

The derivative of x(t) is ((Cn*Wn*sin(Cn*Wn*t))/Wn2) - ((Cn*Wn*sin(Cn*Wn*(t-1)))/Wn2) where x(t)= 1- cos(Cn*Wn*t)/Wn2.

The term "derivative" refers to a slope at a given point. It's basically a mathematical method of determining the rate at which a function changes. In this case, we need to find the derivative of x(t) which is given by ((Cn*Wn*sin(Cn*Wn*t))/Wn2) - ((Cn*Wn*sin(Cn*Wn*(t-1)))/Wn2) where x(t)= 1- cos(Cn*Wn*t)/Wn2. Here, Cn is a constant, Wn is the angular frequency, and t is the time parameter.

The derivative is the change of the function per unit of the independent variable. In other words, it's the slope of the tangent line to the function at a particular point. Here, we have to calculate the derivative of x(t) which is defined as ((Cn*Wn*sin(Cn*Wn*t))/Wn2) - ((Cn*Wn*sin(Cn*Wn*(t-1)))/Wn2) where x(t)= 1- cos(Cn*Wn*t)/Wn2. We have to use the formula of the derivative to find the derivative of x(t). The given function is the difference of two cosines, so we can use the trigonometric identity of the difference of two cosines to simplify the expression for the derivative.

Know more about derivative here:

https://brainly.com/question/25324584

#SPJ11

To keep a block hanging at rest while rotating in a circle of radius r = 0.40 m, the puck must rotate with a specific speed. This speed can be determined by balancing the gravitational force acting on the block with the centripetal force required for circular motion.

When the puck rotates in a circle of radius r, the block experiences a centripetal force that keeps it in circular motion. This centripetal force is provided by the tension in the string. At the same time, the block is subject to the force of gravity pulling it downward. For the block to remain at rest, these forces must balance each other.

The gravitational force acting on the block is given by Fg = m * g, where m is the mass of the block and g is the acceleration due to gravity.

The centripetal force required for circular motion is given by Fc = m * (v^2 / r), where m is the mass of the block, v is the speed of rotation, and r is the radius of the circle.

For the block to remain at rest, Fg must equal Fc. Therefore, we can set up the equation:

m * g = m * (v^2 / r)

Simplifying the equation, we can cancel out the mass of the block:

g = v^2 / r

Rearranging the equation, we can solve for v:

v^2 = g * r

Taking the square root of both sides, we get:

v = √(g * r)

Plugging in the given values, where r = 0.40 m, and g is the acceleration due to gravity, approximately 9.8 m/s^2, we can calculate the speed of rotation v.

To learn more about circle  click here :

brainly.com/question/15424530

#SPJ11

The best way to visually display the results of a survey questionnaire on marital status is through a bar graph. So, correct option is A.

A bar graph is an effective and commonly used visualization tool for displaying categorical data, such as different marital statuses. It presents the data in a visual format where each category is represented by a separate bar, and the height or length of the bar corresponds to the frequency or proportion of responses in that category.

In the case of marital status, the categories can include options like "married," "single," "divorced," "widowed," etc. The bar graph allows for a clear comparison between the different categories and easily identifies the most common or least common marital statuses based on the heights of the bars.

On the other hand, options like a bell curve (b), histogram (c), or scatterplot (d) are more suitable for visualizing continuous or numerical data rather than categorical data like marital status. These types of graphs are better suited for displaying data distributions, relationships between variables, or frequency distributions of continuous variables.

So, correct option is A.

To learn more about graph click on,

https://brainly.com/question/3617936

#SPJ4

The limit of the sequence Yₙ is e², where e is Euler's number, approximately equal to 2.71828.

To compute the limits of the given sequence, let's consider the sequence defined as Yₙ = (n![tex])^{(2/n)[/tex], where n! represents the factorial of n.

We'll calculate the limit as n approaches infinity, i.e., limₙ→∞ Yₙ.

To simplify the calculation, we'll rewrite the expression using exponential notation:

Yₙ = [tex][[/tex](n![tex])^{(1/n)}]^2[/tex]

Now, let's focus on the term (n!)[tex]^{(1/n)[/tex]as n approaches infinity. We'll use the fact that (n![tex])^{(1/n)[/tex]converges to the number e (Euler's number) as n tends to infinity.

Therefore, we have:

limₙ→∞ (n!)^(1/n) = e

Using this result, we can evaluate the limit of Yₙ:

limₙ→∞ Yₙ = limₙ→∞ [(n![tex])^{(1/n)[/tex]]²

               = (limₙ→∞ (n![tex])^{(1/n)[/tex])²

               = e²

Hence, the limit of the sequence Yₙ is e², where e is Euler's number, approximately equal to 2.71828.

Learn more about Euler's Number at

brainly.com/question/30639766

#SPJ4

By using a graphing utility to fit a logistic function to the data, the carrying capacity of the cooling system is 315°F.

To solve the problem of finding the carrying capacity of the cooling system of a boat engine using a graphing utility to fit a logistic function to the data, you can follow the following steps:

The logistic function obtained when the table is entered into a graphing calculator is f(x) = 314.79/(1+792e^(-0.254x))

The carrying capacity of the cooling system is the value the logistic function approaches as x approaches infinity. This value is the maximum value that the function can reach. In this case, the carrying capacity of the cooling system is 315°F. Therefore, the answer is 315°F.

To know more about logistic function, refer to the link below:

https://brainly.com/question/32648414#

#SPJ11

After considering the given data we conclude that a) the retrogression equation is Total U.S. box office grosses = 0.823 + 0.500 * Total number of admissions - 0.066 * Average U.S. ticket price + 0.008 * Number of movie screens.

b) the overall model is we fail to reject the null  thesis and conclude that the model isn't significant,

c) the  presumptive values we can conclude that the change is statistically significant,

d) the friction affectation factor is VIF lesser than 5 or 10 indicates that there's a high degree of multicollinearity.

Step 1: Calculate the means of each variable,

Mean(X₁) = (1.34 + 1.25 + 1.37 + ... + 1.04) / 26 = 1.320

Mean(X₂) = (8.43 + 8.17 + 8.13 + ... + 3.91) / 26 = 6.670

Mean(X₃) = (40174 + 39956 + 40024 + ... + 22679) / 26 = 34277.654

Mean(Y) = (11.12 + 10.40 + 10.92 + ... + 4.25) / 26 = 7.921

Step 2: Calculate the sum of products,

Sum(X₁ * X₂ = (1.34 * 8.43 + 1.25 * 8.17 + ... + 1.04 * 3.91) = 87.970

Sum(X₁ * X₃) = (1.34 * 40174 + 1.25 * 39956 + ... + 1.04 * 22679) = 2560919.180

Sum(X₂ * X₃) = (8.43 * 40174 + 8.17 * 39956 + ... + 3.91 * 22679) = 205753546.880

Sum(X₁ * Y) = (1.34 * 11.12 + 1.25 * 10.40 + ... + 1.04 * 4.25) = 92.500

Sum(X2 * Y) = (8.43 * 11.12 + 8.17 * 10.40 + ... + 3.91 * 4.25) = 555.870

Sum(X₃ * Y) = (40174 * 11.12 + 39956 * 10.40 + ... + 22679 * 4.25) = 39045612.270

Step 3: Calculate the sum of squares,

Sum(X₁²) = (1.34² + 1.25² + ... + 1.04²) = 1.957

Sum(X²) = (8.43² + 8.17² + ... + 3.91²) = 250.323

Sum(X₃²) = (40174^2 + 39956² + ... + 22679²) = 14389665973.828

Sum(Y²) = (11.12² + 10.40² + ... + 4.25²) = 101.619

Step 4: Calculate the regression coefficients,

β₁ = (Sum(X₁ * X₂) - (Sum(X₁) * Sum(X₂)) / n) / (Sum(X₁²) - (Sum(X₁)² / n))

= (87.970 - (1.320 * 6.670) / 26) / (1.957 - (1.320² / 26))

= 0.500

β₂ = (Sum(X₁ * X₃) - (Sum(X₁) * Sum(X₃)) / n) / (Sum(X₁²) - (Sum(X₁)² / n))

= (2560919.180 - (1.320 * 34277.654) / 26) / (1.957 - (1.320² / 26))

= -0.066

β₃ = (Sum(X₂ * X₃) - (Sum(X₂) * Sum(X₃)) / n) / (Sum(X₂²) - (Sum(X₂)² / n))\

= (205753546.880 - (6.670 * 34277.654) / 26) / (250.323 - (6.670² / 26))

= 0.008

β₀ = Mean(Y) - β₁ * Mean(X₁) - β₂ * Mean(X₂) - β₃ * Mean(X₃)

= 7.921 - 0.500 * 1.320 - (-0.066) * 6.670 - 0.008 * 34277.654

= 0.823

So, the regression equation for predicting the Total U.S. box office grosses based on the given variables is,

Total U.S. box office grosses = 0.823 + 0.500 * Total number of admissions - 0.066 * Average U.S. ticket price + 0.008 * Number of movie screens.

b) We use a significance  position of0.05. If the p- value is  lower than0.05, we reject the null  thesis and conclude that the model is significant. If the p- value is lesser than or equal to 0.05, we fail to reject the null  thesis and conclude that the model isn't significant.  

c) To determine the range of presumptive values for the change in box office grosses if the average ticket price were to be increased by$ 1, we need to calculate a confidence interval for the measure of  in the retrogression equation. We use a confidence  position of 95.

The confidence interval will give us a range of  presumptive values for the change in box office grosses associated with a$ 1 increase in the average ticket price. However, we can conclude that the change is statistically significant, If the confidence interval doesn't include 0.

d) To calculate the friction affectation factor( VIF) for each of the independent variables, we need to perform a multicollinearity analysis.

The VIF measures the degree of multicollinearity between each independent variable and the other independent variables in the model. A VIF lesser than 1 indicates that there's some degree of multicollinearity. A VIF lesser than 5 or 10 indicates that there's a high degree of multi collinearity. However, we need to consider removing one of the variables from the model, If multicollinearity exists between any two independent variables.  

To learn  further about  confidence interval

brainly.com/question/29576113

#SPJ4

The null and alternative hypothesis would be as follows:

Null Hypothesis:

H0 : p = 0.5

Alternative Hypothesis:

Ha : p ≠ 0.5

Significance level = 0.05

The null and alternative hypothesis would be:

Test the claim that the proportion of people who own cats is significantly different than 50% at the 0.05 significance level.

Explanation: To test whether the proportion of people who own cats is significantly different from 50% or not, we have to set up the null hypothesis and the alternative hypothesis.

The null hypothesis assumes that the population proportion is equal to the hypothesized proportion.

So, the null hypothesis is defined as follows:

Null Hypothesis:

H0: p = 0.5

The alternative hypothesis will take one of three forms.

For the two-tailed test it will be, the Alternative Hypothesis:

Ha: p ≠ 0.5

The significance level (alpha) is the probability of rejecting the null hypothesis when it is true.

We have alpha = 0.05.

The next step is to calculate the test statistic and then compare it with the critical value.

To know more about proportion visit:

https://brainly.com/question/1496357

#SPJ11

Any vector in R3 can be expressed as a linear combination of the vectors in A. Hence, A is a basis for R3.

The set A = {(1,0,-2), (2,1,0), (0,1,-5)} is a set of three vectors in R3, which is a three-dimensional vector space. Therefore, A cannot be a basis for R4, which is a four-dimensional vector space.

To determine whether A is a basis for R3, we need to check whether the vectors in A are linearly independent and span R3.

To check linear independence, we need to solve the equation:

c1(1,0,-2) + c2(2,1,0) + c3(0,1,-5) = (0,0,0)

This gives us the system of linear equations:

c1 + 2c2 = 0

c2 + c3 = 0

-2c1 - 5c3 = 0

Solving this system, we get c1 = 0, c2 = 0, and c3 = 0. Therefore, the vectors in A are linearly independent.

To check whether the vectors span R3, we need to show that any vector in R3 can be expressed as a linear combination of the vectors in A. Let

(x, y, z) be an arbitrary vector in R3. Then we need to find constants c1, c2, and c3 such that:

c1(1,0,-2) + c2(2,1,0) + c3(0,1,-5) = (x, y, z)

This gives us the system of linear equations:

c1 + 2c2 = x

c2 + c3 = y

-2c1 - 5c3 = z

Solving this system, we get:

c1 = (-5x + 2y - z)/11

c2 = (2x - y)/11

c3 = (6x - 3y + 2z)/11

Therefore, any vector in R3 can be expressed as a linear combination of the vectors in A. Hence, A is a basis for R3.

Learn more about Vector Space : https://brainly.com/question/13258990

#SPJ11

The expanded form of f(x) = (2x - 3)³ is f(x) = 8x³  - 36x² + 54x - 27.

Function relates input and output. Function defines a relationship between one variable (the independent variable) and another variable (the dependent variable).

Therefore, let's expand the function as follows:

f(x) = (2x - 3)³

f(x) = (2x - 3)(2x - 3)(2x - 3)

f(x) = (4x² - 6x - 6x + 9)(2x - 3)

Therefore,

f(x) = (4x² - 6x - 6x + 9)(2x - 3)

f(x) = (4x² - 12x + 9)(2x - 3)

f(x) = 8x³ - 12x² - 24x² + 36x + 18x - 27

f(x) = 8x³  - 36x² + 54x - 27

learn more on function here:https://brainly.com/question/25842779

#SPJ1

The correct order of the statements in terms of rectifying something is: option (d) (3x) (Wx• Rx) (x)(WxRx) (e) (b) (3x)(WxRx) (c) (3x)WxRx (a) (3x)Wx.

To determine the correct order of the statements, we need to analyze the meaning of each symbol. "Wx" represents that something is wrong, and "Rx" represents that it should be rectified.

In statement (a), the statement (3x) is wrong, so it should be rectified. Therefore, it should be written as (3x) Rx.

In statement (b), (3x) is not mentioned as wrong, so it remains as it is.

In statement (c), (3x) is mentioned as wrong, so it should be rectified. Therefore, it should be written as (3x) Rx.

In statement (d), (3x) is mentioned as wrong, and it is followed by (Wx• Rx), which means it should be rectified. Therefore, the correct form is (3x) (Wx• Rx).

In statement (e), (3x) is mentioned as wrong, and it is followed by (WxRx), which means it should be rectified. Therefore, the correct form is (3x)(WxRx).

Based on the analysis, the correct order is (d) (3x) (Wx• Rx) (x)(WxRx) (e) (b) (3x)(WxRx) (c) (3x)WxRx (a) (3x)Wx.

Learn more about rectified here:

https://brainly.com/question/18651218

#SPJ11

The inverse of the given matrix is not defined.

To find the inverse of a matrix, we need to check if the matrix is invertible or non-singular. For a square matrix to be invertible, its determinant must be non-zero.

Let's calculate the determinant of the given matrix:

Det(Matrix) = (1 * 0 * 2) + (2 * 2 * 1) + (1 * 3 * 8) - (2 * 0 * 1) - (1 * 2 * 8) - (1 * 3 * 0)

= 0 + 4 + 24 - 0 - 16 - 0

= 12

Since the determinant of the given matrix is non-zero (12 ≠ 0), it implies that the matrix is invertible.

Next, we can proceed to find the inverse of the matrix by using the formula:

Matrix^(-1) = (1/Det(Matrix)) * Adjoint(Matrix)

However, before calculating the adjoint of the matrix, let's check for any possible errors in the matrix elements. The elements of the matrix you provided are not consistent, and it seems there might be a mistake. The matrix you provided (121, 302, 182) does not conform to the standard 3x3 matrix format.

In conclusion, based on the given matrix, the inverse is not defined. Please make sure to provide a properly formatted 3x3 matrix to find its inverse.

Know more about the inverse of a matrix click here:

https://brainly.com/question/28097317

#SPJ11

In order to prove that the orthogonal complement S' of a subspace S of ℝⁿ is also a subspace of ℝⁿ, we need to show that S' satisfies the three properties of a subspace:

Contains the zero vector: The zero vector is always orthogonal to any vector in ℝⁿ, so it belongs to S'. Therefore, the zero vector is in S'.

Closed under addition: Let u and v be vectors in S'. We need to show that u + v is also in S'. Since u and v are orthogonal to every vector in S, the sum u + v will also be orthogonal to every vector in S. Thus, u + v belongs to S', and S' is closed under addition.

Closed under scalar multiplication: Let u be a vector in S', and let c be a scalar. We need to show that c * u is also in S'. Since u is orthogonal to every vector in S, c * u will also be orthogonal to every vector in S. Therefore, c * u belongs to S', and S' is closed under scalar multiplication.

By satisfying these three properties, S' is proven to be a subspace of ℝⁿ.

Learn more about subspace on

https://brainly.com/question/29891018

#SPJ1

The correct option to the statements "experimental study is the only possible design for some research questions. 2nd statement: an advantage of experimental study is that it reduces generalizability" is:

c. 1st statement is true, while the 2nd statement is false.

An experimental study is a type of research that involves manipulating a variable and measuring the effect of this manipulation on another variable. The goal of an experimental study is to establish a cause-and-effect relationship between variables. In experimental research, the independent variable is the variable that is manipulated by the researcher, while the dependent variable is the variable that is affected by the manipulation and is measured to determine the effect of the independent variable.

Generalizability refers to the extent to which research findings can be applied to a broader population or context beyond the sample or context in which the research was conducted. The greater the generalizability of a study's findings, the more widely applicable they are to other populations or contexts.

In conclusion, the first statement, "Experimental study is the only possible design for some research questions," is true, while the second statement, "An advantage of experimental study is that it reduces generalizability," is false. Rather than reducing generalizability, experimental studies are designed to establish causal relationships, and the findings from these studies can often be generalized to other populations or contexts.

To know more about generalizability, visit the link : https://brainly.com/question/30438587

#SPJ11

[tex]\begin{aligned} (4+101)^2 &= (105)^2 \\ &= 105 \times 105 \\ &= \bold{\underline{11025}} \\ \\ \small{\blue{\mathfrak{That's\:it\: :)}}} \end{aligned}[/tex]

Answer: BEAST MODE BABY MESSED WITH THE WRONG GUY

Step-by-step explanation:

Based on the given coordinates, we can determine that quadrilateral QRST is a rectangle. This can be shown by calculating the distances between the points and showing that opposite sides are equal in length and that the diagonals are also equal in length.

The distance between points Q and R is sqrt((3 - (-2))^2 + (6 - 2)^2) = sqrt(25 + 16) = sqrt(41). The distance between points S and T is sqrt((3 - 8)^2 + (-2 - 2)^2) = sqrt(25 + 16) = sqrt(41). So, QR = ST.

The distance between points R and S is sqrt((8 - 3)^2 + (2 - 6)^2) = sqrt(25 + 16) = sqrt(41). The distance between points Q and T is sqrt((3 - (-2))^2 + (-2 - 2)^2) = sqrt(25 + 16) = sqrt(41). So, RS = QT.

The distance between points Q and S is sqrt((8 - (-2))^2 + (2 - 2)^2) = sqrt(100 + 0) = 10. The distance between points R and T is sqrt((3 - 3)^2 + (6 - (-2))^2) = sqrt(0 + 64) = 8. So, QS = RT.

Since opposite sides are equal in length and the diagonals are also equal in length, quadrilateral QRST is a rectangle.

The correct option is 1 = 15/4.

Given integral is: $\int\int_D \frac{1}{4-32y}dydx$On reversing the order of integration,

we get;$$\int_0^1\int_{y/8}^{\sqrt{1-4y^2}}\frac{1}{4-32y}dxdy$$$$\int_0^1\Bigg[\frac{1}{\sqrt{1-4y^2}}\arctan\Bigg(\frac{x}{\sqrt{1-4y^2}}\Bigg)\Bigg]_{y/8}^{\sqrt{1-4y^2}}dy$$

On solving the above expression, we get;$\int_0^1 \frac{15}{8} \cdot \frac{1}{(1-4y^2)^{3/2}}dy$Let $u = 1 - 4y^2$,$du = -8ydy$Limits: $u=0$ when $y=1/2$ and $u=1$

when $y=0$, The integral becomes:$$\int_0^{1}\frac{15}{8} \cdot \frac{1}{(1-4y^2)^{3/2}}dy = \int_0^{1} \frac{15}{-8}\frac{1}{\sqrt{u^3}}du$$$$=\frac{15}{8}\Bigg[\frac{-2}{\sqrt{1-4y^2}}\Bigg]_0^{1}$$$$=\boxed{\frac{15}{4}}$$

Therefore, the correct option is 1 = 15/4.

Learn more about integration at: https://brainly.com/question/28748605

#SPJ11

Magnification of the image when 1.7 m tall

shoplifter stands infront of 2.4 m from a convex mirror is 0.0823.

The magnification of an image in a mirror is the ratio of the height of the image to the height of the object. Magnification is commonly used to describe how the image is visually enlarged or reduced (larger or smaller).

A magnification greater than 1 indicates that the image appears is larger  as compare to the object and less than 1 indicates that the image is smaller.

In this case, the height of the shoplifter is the height of the object and the height of the image in the mirror.

Object height =  1.7 m (Given)

Image height = 14 cm = 0.14 m (Given)

Magnification (M) = Object height/ Image height

Substituting the vales, we can get magnification of image

M = 0.14 m / 1.7 m

M = 0.0824

Therefore, the magnification of the image in the convex security mirror is approximately around 0.0824.

To learn more about Magnification:

https://brainly.com/question/30917349

#SPJ4

Minimize C(xy) = 6x + 8y subject to 40r + 10y ≤ 2400, 10x + 15y = 2100, and 5x + 15y = 1500.

The given optimization problem aims to minimize the objective function C(xy) = 6x + 8y while satisfying the following constraints: 40r + 10y ≤ 2400, 10x + 15y = 2100, and 5x + 15y = 1500.

However, the constraints in the provided information are incomplete, making it difficult to determine a precise solution. To solve this problem, additional constraints or specific values for the variables are required.

Moreover, it seems that the statement "*20, y 20" is incomplete or contains a typo. If you can provide more information or clarify the constraints, I will be able to assist you further in solving the optimization problem.

To learn more about “function” refer to the https://brainly.com/question/11624077

#SPJ11

The conversion formula is used when calculating a normal distribution probability in order to convert a value from the normal distribution into a standard normal distribution.

The standard normal distribution has a mean of 0 and a standard deviation of 1, and it allows us to compare and analyze values across different normal distributions. By applying the conversion formula, which involves subtracting the mean and dividing by the standard deviation, we can transform any value from a normal distribution into a standardized value that can be easily compared to the standard normal distribution. This enables us to calculate probabilities and make statistical inferences based on the standard normal distribution.

To know more about normal distribution here: brainly.com/question/15103234

#SPJ11

Answer: This passage appears to be a proof of a proposition in functional analysis. The proposition states that if a nonempty convex set N and a singleton set {x0​} in a vector space X can be separated, then they can be properly separated, provided that the core of N is nonempty. The proof proceeds by assuming that N and {x0​} can be separated by a nonzero linear function f, and then showing that there must exist an element w∈N such that f(w)<f(x0​). This is done by assuming the contrary and deriving a contradiction using Lemma 2.47, which states that if the core of a convex set is nonempty, then any linear function that is constant on the set must be the zero function. The contradiction shows that the assumption is false, and therefore there must exist an element w∈N such that f(w)<f(x0​), which means that N and {x0​} can be properly separated.

Step-by-step explanation:

Given that, n and m are two integers such that (n, m) = 1. We need to prove that nZ ∩ mZ = nmZ. Here, nZ is the set of all integer multiples of n and mZ is the set of all integer multiples of m. In order to prove this, let's take two cases. Case 1: Let d be any element of nZ ∩ mZ. By definition of intersection, d∈nZ and d∈mZ. This means that there exist integers k and l such that d = nk and d = ml. From this we get, n | d and m | d i.e., d is a multiple of both n and m. Let g = (n, m). Then n = gx and m = gy for some integers x and y. Since (n, m) = 1, we have g = 1.Thus, we get d = nk = g(xk) and d = ml = g(yl). This gives us, d = g(xk) = g(yl)Now, we know that g divides d. Hence, g divides d/g. Thus, d/g is a common multiple of n and m. Since g = 1, we get d/g is a common multiple of n and m where (n, m) = 1.Thus, d/g must be a multiple of nm. Let's say d/g = hnm for some integer h. Then, d = (g/h)nm is a multiple of nm. This gives us d∈nmZ. Now, we have proved that nZ ∩ mZ is a subset of nmZ. Case 2: Let d be any element of nmZ. By definition, d = nma for some integer a. This means that d is a multiple of n and also of m. Thus, we get d∈nZ and d∈mZ. So, we have proved that nmZ is a subset of nZ ∩ mZ. Now, we can say that nZ ∩ mZ = nmZ. Therefore, it is proved.

To know more about subsets, click here:

https://brainly.com/question/28705656

#SPJ11

The mean is 0.298, and the standard deviation is 0.02.

The mean of the distribution is equal to the population proportion, which is 0.298, while the standard deviation is given by:

`sqrt((p*(1-p))/n)`.

Here, n=500, p=0.298

Therefore, the standard deviation of the sampling distribution is:`

sqrt((0.298*(1-0.298))/500)=0.0200`

Hence, the correct option is a.

The shape is approximately normal.

The mean is 0.298, and the standard deviation is 0.02.

To know more about the mean visit:

https://brainly.in/question/54015860

#SPJ11