Convert 533 cm/s to units of meters per minute. Show the unit analysis by dragging the conversion factors into the unit‑factor slots

Answer:

Sight, hearing, taste, touch,  and smell

Explanation:

Explanation:

Generally, polar molecules contain polar bonds that arise as a result of the difference in electronegativities of the elements in the molecule. In most instances, molecules containing a metal and a non metal are polar in nature.

HBr - This molecule has two opposite sides of polarity, a group 1 and group 7 element. It is polar

CO2 - The bond between C and O is polar however, there is a cancellation of the polar bonds due to how the atoms are arranged. It is non polar.

BF3 - There is no net dipole (separation of charges) in this compound hence it is non polar.

H2 - Covalent molecules made up of only one type of atom are non polar.

CH4  - This is non polar as the difference in electronegativities between C and H is not great enough to form a dipole.

NH3 - The polar bonds (N-H) do not cancel each other out. Hence this molecule is polar.

Answer:

1224.7

Explanation:

Each lb is 453.59

Based on the conversion factor, a person loses 2.70 lb in two weeks loses 1225.8 g

The conversion factor from pounds to grams is given as follows:

Therefore, 2.70 pounds can be converted to grams as follows:

270 lb = 2.70 × 454 g/ 1 lb

270 lb = 1225.8

Thus, a person loses 2.70 lb in two weeks loses 1225.8 g

Learn more about pounds and grams at: https://brainly.com/question/1121265

Answer:

250000 J.

Explanation:

From the question given above, the following data were obtained:

Mass (m) = 1250 kg

Velocity (v) = 20.0 m/s.

Kinetic energy (K.E) =?

Kinetic energy is simply defined as energy possed by a body in motion. Mathematically, it is expressed as:

K.E = ½mv²

Where:

K.E is the kinetic energy

m is the mass of the object

v is the velocity of the object.

Thus, we can obtain the kinetic energy of the automobile by using the above formula as illustrated below:

Mass (m) = 1250 kg

Velocity (v) = 20.0 m/s.

Kinetic energy (K.E) =?

K.E = ½mv²

K.E = ½ × 1250 × 20²

K.E = 625 × 400

K.E = 250000 J

Therefore, the kinetic energy of the automobile is 250000 J

Answer:

ll represents the shape of an orbital

Explanation:

There are four quantum numbers which give information about various orbitals in an atom. They describe the probability of finding the electron in an atom.

The orbital or azimuthal quantum number is represented as l. This quantum number gives information about the shape of an orbital.

Answer:

b) low temperature and high pressure

Explanation:

Deviation of gases from their ideal behavior could be as a result of two things which include a very small volume for the gases and the collisions not being elastic enough.

Small volume will decrease the frequency of elastic collisions a gas will experience as a result of the tiny space.

Low temperature will decrease the amount of elastic collisions and energy of the gas and high pressure will decrease the volume which is why there will be a deviation in the ideal behavior of Hcl(g)

Answer:

6.52×10²⁰ molecules.

Explanation:

We'll begin by converting 210 mg of caffeine to grams (g). This can be obtained as follow:

Recall:

1 mg = 1×10¯³ g

Therefore,

210 mg = 210 mg / 1 mg × 1×10¯³ g

210 mg = 0.21 g

Therefore, 210 mg of caffeine is equivalent to 0.21 g of caffeine.

Finally, we shall determine the number of molecules in 0.21 g of caffeine as follow:

194 g of caffeine contains 602×10²³ molecules.

Therefore, 0.21 g of caffeine will contain = (0.21 × 602×10²³)/194 = 6.52×10²⁰ molecules.

Therefore 0.21 g contains 6.52×10²⁰ molecules.

Thus, we can say that 210 mg (i.e 0.21g) of caffeine contains 6.52×10²⁰ molecules.

Answer:

Explanation:

In 150 ml of .06 g / ml solution , gram of iodine = 150 x .06 g = 9 g

Let volume of given concentration of .12 g / ml required be V

In volume V , gram of iodine = V x .12 g

According to question

V x .12 = 9 g

V = 9 / .12 = 75 ml

So, 75 ml of .12 g/ml will be taken and it is diluted to the volume of 150 ml to get the solution of required concentration .

Answer:

21 cm 3 that is the answer

Explanation:

Cobalt extraction refers to the techniques used to extract cobalt from its ores and other compound ores. Several methods exist for the separation of cobalt from copper and nickel. They depend on the concentration of cobalt and the exact composition of the used ore.

Cobalt ore

Contents:

The ores are treated by a sulfatizing roast in a fluidized bed furnace to convert copper and cobalt sulfides into soluble sulfates and iron into insoluble hematite. The calcine is subsequently leached with sulfuric acid from the spent copper recovery electrolyte. Oxide concentrates are introduced at this leaching step to maintain the acid balance in the circuit. Iron and aluminum are removed from the leach solution by the addition of lime, and copper is electrowon on copper cathodes. A part of the spent electrolyte enters the cobalt recovery circuit and is purified by the removal of iron, copper, nickel, and zinc prior to the precipitation of cobalt as its hydroxide. This is accomplished by the addition of more lime to raise the pH until the remaining copper precipitates. This copper is sent back to the copper circuit. As more lime is then added, a copper-cobaltite precipitates and is fed back to the leaching process. Sodium hydrosulfide (NaHS) is added (along with some metallic cobalt as a catalyst) to precipitate nickel sulfide (NiS). Hydrogen sulfide (H2S) and sodium carbonate (Na2CO3) are then added to precipitate zinc sulfide (ZnS). Lime is then added to saturation to precipitate cobalt(II) hydroxide (Ca(OH)2). In the final stages, this cobalt hydroxide is redissolved and the metal is refined by electrolysis. The resulting cobalt cathodes are crushed and vacuum degassed to obtain a pure cobalt metal.

Answer:

Why does matter exist?

Explanation:

Answer:

d. There are two moles of hydroxide for each mole of these compounds.

Explanation:

calcium hydroxide, strontium hydroxide, and barium hydroxide all have two hydroxide compunds. the difference between each of these compounds is they all contain a different element along with hydroxide.

Explanation:

for respiration(exchange of gases)

Actually, all leaves have the same structure. The main purpose is to carry the photosynthesis out, that provides food that needs to survive. :)

Answer:

only compound have uniform compositiob

Answer:

3

Explanation:

For decimals, you always start at the first non-zero number and count all the way to the end of the number. To count the number of significant figures this number has, you start at 6 and count every number after that for a total of 3.

Answer:

positive--real negative--not real

1) You can tell the temperature by counting a cricket's chirps! 2) Sandstorms can swallow up entire cities. 3) Dirt mixed with wind can make dust storms called black blizzards. ... 5) The coldest temperature ever officially recorded was -89.2°C.

Answer:

Final temperature is 32.56 °C

Explanation:

The specific heat of a substance is the amount of heat required to raise the temperature of 1g of the substance by 1°C.

The following equation/formula is used;

Q = m × c × ΔT

Where; Q= amount of heat supplied

(cal)

M= mass of ethanol (g)

C= specific heat of ethanol

(cal/g °C)

ΔT= change in temperature (°C)

i.e. (final temperature - initial

temperature)

According to the question, Q= 100 calories (cal), M= 18g, C= 0.581 cal/g °C, initial temperature = 23°C, final temperature = ?

Hence, we insert our values into the equation;

Q = m × c × ΔT

ΔT = Q/mc

(Final T - Initial T) = Q/mc

(Final T - 23) = 100/ 18 × 0.581

(Final T - 23) = 100/10.458

Final T - 23 = 9.562

Final T = 23 + 9.562

Final T = 32.562

Hence, the final temperature of ethanol is 32.56°C

Answer: A: the components have different properties

Explanation:

The guy above is wrong I’m right got it correct on my unit review on edge

Answer:

A.

Explanation:

Answer:

A base pair is a pair of bases that form hydrogen bonds in the double stranded DNA molecule.

- Adenine-thymine: A-T

- Guanine-cytosine: G-C

Replication Process:

- Double strand unwinds.

- New nucleorides line up via base pairing.

- Colvalent bonds link nucleotides together in the new strands.

Explanation:

Answer:

the answer would be, 355000 mm/s.

Answer:

Compound A:    1-bromo-1-methylcyclohexane

Compound B:     1-methylcyclohex-1-ene

Explanation:

In this question, we can start with the I.D.H (hydrogen deficiency index):

[tex]I.D.H~=~\frac{(2C)+2+(N)-(H)-(X)}{2}[/tex]

In the formula we have 7 carbons, 13 hydrogens, and 1 Br, so:

[tex]I.D.H~=~\frac{(2*7)+2+(0)-(13)-(1)}{2}=1[/tex]

We have an I.D.H value of one. This indicates that we can have a cyclic structure or a double bond.

We have to keep in mind that the Br atom must be bonded to a tertiary carbon. We can not have a double bond because in the ozonolysis reaction we have only 1 product, therefore, we can not have a double bond in the initial molecule (if we have a double bond in the initial molecule we will have more than 1 product in the ozonolysis reaction).

With this in mind, we will have a cyclic structure. If we have 7 carbons and we need a tertiary alkyl halide. We can have a cyclic structure of 6 members and a methyl group bonded to a carbon that also is bonded to a Br atom (1-bromo-1-methylcyclohexane).

In the reaction with [tex]CH_3CH_2ONa[/tex] we will have an elimination reaction. In other words, we have the production of a double bond inside of the cyclic structure (1-methylcyclohex-1-ene).

See figure 1 for further explanations.

I hope it helps!

Answer:

sink

Explanation:

The Intermolecular force of attraction exists within the water molecule. This type of intermolecular force of attraction is known as a hydrogen bond. A hydrogen bond is a dipole-dipole intermolecular attraction that occurs when hydrogen is covalently bonded to highly electronegative elements of a small atomic size.

When the heat is applied to this intermolecular force, the heat disrupts the intermolecular force, and the surface tension is being broken. This is what caused a hot needle to sink when placed in cold water. But when a cold needle is placed on the surface of warm water, the cold needle will not break up the warm water's surface tension. As a result, the cold need sinks in the warm water.

Answer:n a  red blood cell, the control center is the nucleus. A mitochondria is not a nucleus. It is another organelle that produces energy for the cell.

Explanation:

Answer:

C) 6.95 M.

Explanation:

Hello,

In this case, considering that the molarity is computed via the ratio of the moles of solute to the volume of the solution in liters:

[tex]M=\frac{n_{solute}}{V_{solution}}[/tex]

Since the volume here is 95.0 mL or also 0.0950 L, the molarity turns out:

[tex]M=\frac{0.660mol}{0.0950L} \\\\M=6.95 M[/tex]

Therefore, answer is C) 6.95M.

Best regards.

Answer:

We need the options to answer.

Explanation:

N/A

Answer:

The mass of NH₄OH  present in the solution is 8.085 g

Explanation:

Given;

molarity of NH₄OH = 6 M

density of NH₄OH = 0.960 g/mL

mass of NH₄OH  = 37.0 grams

volume of  NH₄OH = mass /density

                                = 37/0.96

                                = 38.54 mL

molarity = moles of solute / Liters of solution

moles of solute  = molarity  x Liters of solution

moles of solute  = 6 x  38.54 x 10⁻³

moles of solute  = 0.231 moles

Reacting mass = number of moles x molecular mass

Molecular mass of NH₄OH = 35 g/mol

Reacting mass = 0.231 mol x 35 g/mol

Reacting mass = 8.085 g

Therefore, the mass of NH₄OH  present in the solution is 8.085 g

Answer:

18.75 g of NH3.

Explanation:

The balanced equation for the reaction is given below:

4NH3 + 5O2 → 4NO + 6H2O

Next, we shall determine the masses of NH3 and O2 that reacted from the balanced equation.

This can be obtained as follow:

Molar mass of NH3 = 14 + (3x1) = 17 g/mol

Mass of NH3 from the balanced equation = 4 x 17 = 68 g

Molar mass of O2 = 16x2 = 32 g/mol

Mass of O2 from the balanced equation = 5 x 32 = 160 g

From the balanced equation above,

68 g if NH3 reacted with 160 g of O2.

Next, we shall determine the excess reactant. This can be obtained as follow:

From the balanced equation above,

68 g if NH3 reacted with 160 g of O2.

Therefore, 40 g of NH3 will react with = (40 × 160)/68 = 94.12 g of O2.

From the calculations made above, we can see that it will take a higher amount of O2 i.e 94.12g than what was given i.e 50g to react completely with 40 g of NH3.

Therefore, O2 is the limiting reactant and NH3 is the excess reactant.

Next we shall determine the mass of excess reactant that reacted. This can be obtained as follow:

From the balanced equation above,

68 g if NH3 reacted with 160 g of O2.

Therefore, Xg of NH3 will react with 50 g of O2 i.e

Xg of NH3 = (68 × 50)/160

Xg of NH3 = 21.25 g

Therefore, 21.25 g of NH3 (excess reactant) were consumed in the reaction.

Finally, we shall determine mass of the remaining excess reactant as follow:

Mass of excess reactant = 40 g

Mass of excess reactant that reacted = 21.25 g

Mass of excess reactant remainig =?

Mass of excess reactant remainig = (Mass of excess reactant) – (Mass of excess reactant that reacted)

Mass of excess reactant remainig

= 40 – 21.25

= 18.75 g

Therefore, the mass of excess reactant remaining is 18.75 g of NH3.

Answer:

theory

Explanation:

kinetic theory of gases

Answer:

Hypothesis

Explanation:

Just did it