enter your answer in the provided box.a solution is made by dissolving 0.100 mol of nacl in 7.05 mol of water. what is the mass percent of nacl?

Fluorine is the most electronegative among the group and tends more to gain an electron by chemical bonding. For the same reason, fluorine is more reactive than bromine. magnesium is more reactive than calcium because, Ca contains more inner electrons and experience shielding effect.

Electronegativity is the ability of an atomic nucleus to attracts its own electrons as well as the bonded electrons. Fluorine has the  highest electronegativity than any element in periodic table.

F is more prone to be reactive since it needs gain an electrons to achieve stability. Cl has the same number valence electrons and but it contains more inner electron which shield each other. The most electronegative F will be more reactive in the group. For the same reason F is more reactive than Br also.

Potassium is more reactive than lithium because, potassium contains more loosely bound electron in its valence shell. Hence, it can be easily lose that electron through chemical bonding.

Magnesium is less reactive than Ca because, its valence electrons are more close to the nucleus. Whereas, Ca has one more shell in which the valence electrons are located which can be easily participated in bonding.

Similarly, oxygen is more reactive than sulfur, because, oxygen is highly electronegative and it tends to gain  two electrons by reaction.

To find more on electronegativity, refer here:

http://brainly.com/question/17762711

#SPJ1

To solve such this we must know the concept of nucleophilic substitution reaction. Therefore, the correct option is option II. Primary alkyl halide are suitable for SN2 reaction.

Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved.

The characteristics of SN2 mechanism:

It is a nucleophilic substitution reaction.

Leaving group, a nucleophile, electrophile and a solvent are present

The product formed is the inverted product.

The attack of nucleophile is from backside of the leaving group.

The order of reactivity of alkyl halide is 1°>2°>3°.

Therefore, the correct option is option II.

Learn more about the chemical reactions, here:

https://brainly.com/question/3461108

#SPJ4

The relationship between the following compounds is constitutional isomers. Therefore, option B is correct.

Compounds that differ in connectivity, or the way the constituent atoms are joined to one another, are known as constitutional isomers. A key technique for counting them is graph theory.

Constitutional isomers are molecules with varying connections, similar to how red and green beads are arranged differently in simple bracelets. Stereoisomers are the second category. Stereoisomers have identical connectivity, but their component pieces are arranged differently in space.

Thus, option B is correct.

To learn more about constitutional isomers, follow the link;

https://brainly.com/question/9355669

#SPJ4

The number of atoms found in a mole of compound has been given by relationship between the mole and the Avogadro number. The Avogadro number has been the constant that has been given by the number 6.023 × 10^23.

The relationship between the atoms and mole has been given by:

1 mole = 6.023 × 10^23 mg ions.

So, the number of mg ions  that has been present in1 mole of the MgO has been equivalent to the Avogadro number.

Thus, 1 mole of MgO has 6.023 ×  10^23 mg  ions.

Learn more about avogadro number here :-

https://brainly.com/question/28812626

#SPJ4

Answer:

NaO2SO3 -> Na2SO4 + O2

Explanation:

The reaction of NaCl (sodium chloride) and Oxone (potassium peroxymonosulfate) is described by the following chemical equations:

The first step in the reaction is to dissociate oxone into its component ions:

Oxone (potassium peroxymonosulfate) -> K+ (potassium ion) + O2SO3- (peroxymonosulfate ion)

The peroxymonosulfate ion (O2SO3-) then oxidizes the sodium chloride (NaCl) to produce sodium peroxymonosulfate (NaO2SO3) and chlorine gas (Cl2):

NaCl + O2SO3-  -> NaO2SO3 + Cl2

The sodium peroxymonosulfate (NaO2SO3) then decomposes into sodium sulfate (Na2SO4) and oxygen gas (O2):

NaO2SO3 ) -> Na2SO4  + O2.#SPJ4

.

Enzymes are proteins that catalyze chemical reactions in cells. The first step in an enzyme reaction is the binding of the substrate, the molecule that the enzyme acts on, to the active site of the enzyme.

The active site is a specific region on the enzyme's surface where the substrate binds. Once the substrate is bound, the enzyme may undergo a conformational change, which brings the substrate closer to the catalytic site of the enzyme. The catalytic site is the region of the enzyme where the chemical reaction takes place.

The substrate is then modified by the enzyme, resulting in the production of one or more products. Finally, the product(s) are released from the enzyme, and the enzyme is available to bind and catalyze the reaction with additional substrate molecules.

Learn more about enzyme here:

https://brainly.com/question/1596855

#SPJ4

The way that we can be able to know that the compound is an aromatic compound is that the compound has a continuous network of overlapping pi orbitals. Option B

We know that the term aromaticity has to do with the fact that the compound would have the same number of electrons that would correspond to the Huckel rule. If we look at the Huckel rule, we can nsee that the statement of the rule is that a specie would be aromatic if the specie has a total of n -1 number of pi electrons that are present in a molecule of the compound as we can see in the image that has been shown here.

Given that we have the compound as it has been shown, we can see that there is a continious stretch of the overlapping orbitals. The overlapping orbitals is how we can be able to know that the compound that is in question is an aromatic compound.

Learn more about compounds:https://brainly.com/question/13516179

#SPJ1

The physical properties of cornstarch are that s a white, tasteless, odorless powder substance which is  used in food processing, papermaking, and the production of industrial adhesives.

It is also a component which is used in many cosmetics and oral pharmaceutical products and is also used as a lubricant in surgical gloves.

The chemical properties are that cornstarch is usually made up of 27 percent amylose and 73 percent amylopectin. Sometimes this ration varies  when comparing different corn varieties, environmental and soil conditions.

The reaction of corn starch with water doesn't results in the formation of any new product and hence is known as a physical change.

To learn more about cornstarch

brainly.com/question/28549502

#SPJ4

The Cl₂ molecule breakes to form two radicals. One attacks the first double bond and forms the compound CH3-CH (Cl) -CH· -CH=CH₂. The CH radical further joins with the second Cl radical and form the product CH3-CH (Cl) -CH(Cl) -CH=CH₂.

Halogenation is the reaction of organic or inorganic compounds with halogen atoms such as chlorine, bromine etc forming corresponding halides.

In the given reaction,  Cl₂ molecule decomposes  to form two Cl radicals thermally or photochemically. One Cl radical attacks the double bond and forms the product  CH3-CH (Cl) -CH· -CH=CH₂ leaving one CH radical in it.

The second Cl radical is now available to attack the CH radical and finally produce the dihalide CH3-CH (Cl) -CH(Cl) -CH=CH₂.The compound is named as 3, 4 dichloropentene.

To find more on halogenation, refer here:

https://brainly.com/question/24751735

#SPJ4

Hydrogen is said to be positively charged and not negatively charged.

A hydrogen atom loses an electron, becoming positively charged (it has a charge of +1), and this creates a hydrogen ion. Due to the fact that a hydrogen atom only possesses one proton and no electrons, a hydrogen atom is frequently referred to as only a proton.

A proton in the nucleus of a hydrogen atom is surrounded by one electron. In order to form a full outer shell and become more stable, hydrogen usually loses this electron or shares it with another atom in a covalent bond. Hydrogen is only one proton thick when its electron is removed, giving it a positive charge.

Read more on Hydrogen here:https://brainly.com/question/24433860

#SPJ1

The IUPAC name for the structure shown ball and stick is methyl derivatives of cyclobutanol.

An IUPAC name will typically have three key characteristics: a major chain or ring of carbon atoms found in the molecular structure, also known as a root or base. A suffix or additional element(s) denoting potential functional groups in the compound.

Whether in a continuous chain or a ring, the longest chain of carbons joined by a single bond serves as the basis for IUPAC nomenclature. According to a particular set of priorities, all deviations, whether multiple bonds or atoms other than carbon and hydrogen are denoted by prefixes or suffixes.

Therefore, IUPAC refers to the ball and stick-shaped structure as methyl derivatives of cyclobutanol.

To learn more about IUPAC names, refer to the link:

https://brainly.com/question/16631447

#SPJ4

Pyruvate enters mitochondria and then enters the Krebs cycle, where it is broken down into carbon dioxide and water to produce ATP and other byproducts, which then enter the electron transport chain to produce more ATPs.

The citric acid cycle is regulated by calcium ions by activating pyruvate dehydrogenase, the first component of the pyruvate dehydrogenase complex reaction that produces acetyl-CoA. The cycle converts acetyl coenzyme A (acetyl CoA)'s chemical energy into the reducing power of nicotinamide adenine dinucleotide (NADH).

The Krebs cycle, also known as the TCA cycle (tricarboxylic acid cycle) or the Citric acid cycle, is a series of enzyme-catalyzed reactions that occur in the mitochondrial matrix and involve the oxidation of acetyl-CoA to form carbon dioxide and the reduction of coenzymes to generate ATP in the electron transport chain. The citric acid cycle is the mitochondrial hub for the final stages of carbon skeleton oxidative catabolism for carbohydrates, amino acids, and fatty acids.

To learn more about Krebs cycle, here

https://brainly.com/question/13153590

#SPJ4

0.1 M NaCl has a higher freezing point than 0.1 M glucose. This is because 0.1 M NaCl is a stronger electrolyte than 0.1 M glucose, which means it can form more ion-ion interactions with other molecules in the solution.

The freezing point is the temperature at which a liquid turns into a solid. It is also known as the freezing temperature and is the point at which the molecules of a substance slow down enough for them to form a crystalline structure. The freezing point of a substance is determined by its chemical composition and the pressure the substance is under. Generally, the freezing point decreases as the pressure of the substance increases. For most substances, the freezing point is below 0°C (32°F). Water has a unique property, however, and its freezing point is 0°C (32°F) at a pressure of 1 atmosphere.

This increases the solution's boiling point and freezing point due to the increased attractive forces between the molecules.

To learn more about freezing point
https://brainly.com/question/27184453
#SPJ4

Nano3, or sodium nitrate, is a highly soluble compound,  22.5 g of nano3 will dissolve in 100 g of water at 20° C.

At 20° C the solubility of NaNO3 is 74 g/100 g

Thus, 74 g of NaNO3 will dissolve in 100g of water.

For more information on solubility kindly visit to

https://brainly.com/question/29857840

#SPJ4

The following options correct : 1. A half-reaction shows the electrons gained by the reactants in a galvanic cell.

2. The overall process occurring in a galvanic cell includes both an oxidation and a reduction reaction.

3. The two parts are each known as half-reactions.

A dry cell is the battery which is made up of one or more electrochemical cells and convert the stored chemical energy in to the mechanical energy. the given all of the options are correct for the half reaction cell as :

1. In the galvanic cell the electrons are gained by the reactant is the half reaction cell.

2. The oxidation and the reduction reaction in the galvanic cell shows the occurring of overall process.

3. The half - reaction is the two parts of the overall reaction that is oxidation half - reaction  and the reduction half - reaction.

To learn more about galvanic cell here

https://brainly.com/question/11391843

#SPJ4

The element in the seventh group and the third period will have 7 energy Levels and a valence of 3. The element in 7th group and 3rd period is cobalt (Z = 27).

Groups in periodic table are vertical columns with elements having same number of valence electrons and similar chemical and physical properties. The valence of an element is the number of electrons that have to gained gained or lost from the element to achieve octet.

The element in 7th group and third period is cobalt with the atomic number of 27. The number of valence electrons is 9 in which 2 are in s electrons and 7 are in d orbital.

Therefore Co needs 3 more electrons to attain complete electronic configuration in d -orbital. Hence, there are 7 energy levels and valence of 3 for Co.

To find more on Co, refer here:

https://brainly.com/question/21138965

#SPJ1

Enzymes are proteins that act as catalysts in biochemical reactions, speeding up the rate of the reaction without being changed or consumed in the process.

They are highly specific, meaning that they only recognize and interact with very specific molecules, allowing them to act as highly efficient catalysts.

Learn more about Catalyst here:

https://brainly.com/question/12507566

#SPJ4

The total number of electrons shared between the atoms in the picture is: C. 4.

Shared electrons are the electrons that are used in covalent bonding between two atoms. It occurs when electrons from an atom bond with electrons from the neighbor atom.

In the picture given, we can translate the formula as follows:

  . .    . .           . .     . .

: O = O :  --> : O : : O :

From the representation above, we can conclude that 2 pairs of electrons are shared between the atoms (shown as a double bond). Hence, the total number of electrons shared is: 4.

This question is incomplete. The complete query is as follows:

“Given the Lewis electron-dot diagram for oxygen gas (O2). What is the total number of electrons shared between the atoms represented in this formula?

Choose one below:

The formula of Lewis structure is attached below.

Learn more about shared electrons here https://brainly.com/question/29795380

#SPJ4

The excess reactant left in the mixture is 0.5 mol.

What are reactants?

In a chemical reaction, reactants are the starting materials that react to form new products. Reactants are typically listed on the left side of a chemical equation, and the products are listed on the right side.

To determine the amount of excess reactant left in the reaction mixture once the reaction has occurred as completely as possible, we need to balance the chemical equation for the reaction and then use the balanced equation to calculate the amount of excess reactant.

Assuming that the reaction is:

ZnS + O2 -> ZnO + SO2

The balanced chemical equation would be:

2 ZnS + 3 O2 -> 2 ZnO + 2 SO2

Once the reaction has occurred as completely as possible, the amount of each reactant present in the reaction mixture can be calculated using the mole ratios from the balanced equation.

For example, if the amount of ZnS present in the reaction mixture is 4.2 mol, the amount of O2 present can be calculated as follows:

O2 = (4.2 mol ZnS) x (3 mol O2 / 2 mol ZnS) = 6.3 mol O2

Since the initial amount of O2 present in the reaction mixture was 6.8 mol, the excess reactant is 6.8 mol O2 - 6.3 mol O2 = 0.5 mol O2.

Therefore, the amount of excess reactant (O2) left in the reaction mixture once the reaction has occurred as completely as possible is 0.5 mol.

To learn more about reactants from the given link:

https://brainly.com/question/6421464

An electron cannot have the quantum numbers n = 1, l = 1, and ml = 1. Therefore, option (D) is correct.

The set of numbers that can describe the position and energy of a particular electron are known as quantum numbers. Four quantum numbers are principal quantum numbers, azimuthal, magnetic, and spin quantum numbers.

Principal quantum numbers (n) can designate the principal electron shell and the most probable distance between electrons and the nucleus. The azimuthal quantum number (l)  can designate the shape of an orbital and has a value equal to n -1.

The magnetic quantum number can designate the total number of orbitals in a particular subshell and the orientation of orbitals. It has value -l to l.

Therefore, n = 1 then l = 0, and ml = 0 as well.

Learn more about quantum numbers, here:

brainly.com/question/16977590

#SPJ1

Answer:

smoke

Explanation:

cause he must put a flame fire on the coal to heat the barbecue

The chemical reactions that must happen in John's barbeque the heat from your grill, frying pan, or toaster breaks down the proteins in your meal into amino acids in a process known as the Maillard Reaction. These amino acids then combine with the carbohydrates in the food to form this delicious brown mass.

The chemical reaction between amino acids and reducing sugars known as the Maillard process is what gives browned food its characteristic flavor. Foods that experience this reaction include grilled steaks, fried dumplings, cookies and other biscuits, breads, and toasted marshmallows.

By rearranging amino acids and particular simple sugars, which subsequently arrange themselves in rings and groups of rings that reflect light in such a way as to give the meat a brown color, the Maillard reaction specifically forms brown pigments in cooked meat.

Transformations of energy can be quite beneficial. For instance, when natural gas undergoes a chemical transformation in a furnace or grill. The gas' chemical energy is converted into heat energy, which cooks our food or keeps us warm.

Thus, the heat from your grill, frying pan, or toaster breaks down the proteins in your meal into amino acids in a process known as the Maillard Reaction.

To learn more about Maillard Reaction, follow the link;

https://brainly.com/question/14491656

#SPJ2

A compound's solution in water has a sour taste, colors litmus red, and conducts electricity.The substance in the solution can be acidic.Mg(OH)2

Magnesium(2+) hydroxide or Milk of Magnesia are other names for it.It is a major ingredient in antacids and naturally occurs as the mineral brucite.Magnesium hydroxide's chemical name is Mg(OH)2.

As an antacid, magnesium hydroxide is employed to treat heartburn and indigestion.It works by neutralizing the stomach's hydrochloric acid to produce magnesium chloride & water.

To know more about Mg(OH)2 visit:

https://brainly.com/question/14564818

#SPJ4

A typical solvent for NMR spectroscopy of organic compounds is deuterated chloroform.

What is CDCl3?

Chloroform (CHCl3) is a derivative of CDCl3, in which the hydrogen atom ("H") is switched to the heavy hydrogen isotope deuterium ("D").

CDCl3 is used because of the following two reasons

In order to stabilise the magnetic field strength, contemporary NMR spectrometers evaluate the solvent's deuterium absorption. The deuterium receiver detects a field fluctuation through a change in the observation frequency and can adjust the field intensity accordingly because the observation frequency is field dependant.

Deuterated solvents are used in place of common 1H-containing solvents to prevent the massive solvent absorption that would otherwise ruin the 1H-NMR spectra because there is always a lot more solvent in the sample than substance of interest.

To learn more about NMR spectroscopy of organic compounds is the given link:

https://brainly.com/question/29824732

#SPJ4

The actual amount of Al2O3 produced is 2.7 moles.

Several physical and chemical factors also influence disinfectant procedures: temperature, pH, relative humidity, and water hardness.

Sanitizers can usually function properly in temperatures between 75°F and 120°F. Some metal objects may corrode when exposed to chlorine compounds at higher temperatures. Higher temperatures may also cause chlorine and iodine chemicals to evaporate from the solutions.

Number of microbes: If the microbial load is large, a stronger concentration of disinfectant or a longer exposure period is required to reach a specific level of disinfection.

To know more about sanitizer mixture visit:-

https://brainly.com/question/21329928

#SPJ4

100 degrees Celsius is the temperature at which the reaction will happen most quickly. So the correct answer is option D.

A chemical reaction is a process that transforms one or more chemicals into others by breaking or creating interatomic connections.

In chemical reactions, substances known as reactants are transformed into additional substances known as products. The following are the variables that influence a chemical reaction's rate:

Temperature

reactant concentration

an active catalyst

Reactants' surface area

At 100°C, the reaction will be happening at the greatest speed, and the reactants will be most likely to react with one another and form the products of the reaction. The reaction rate will be higher than at lower temperatures because at higher temperatures, more molecules will have enough energy to react and make the reaction happen more quickly.

Thus , the rate of reaction likewise increases with rising temperature. Therefore, at 100°C, the reaction rate will be at its highest.

Learn more about chemical reaction at : https://brainly.com/question/29762834

#SPJ4

A. 25 degrees Celsius

B. 50 degrees Celsius

C. 75 degrees Celsius

D. 100 degrees Celsius

Please answer the following question and list the components of a typical filter setup. Everything will be crystallization. correct Büchner funnel Two vacuums are enabled by the rubber adaptor.

The most typical illustration is brewing tea. Tea leaves and water are separated during tea preparation using a filter or sieve. The pores of the sieve will only let water through. After this point, the band stop filter prevents frequency, whereas the bandpass filter allows it. The maximum frequency at which the output power is lowered is known as the upper cutoff frequency. Vacuum filtration: What is it? Suction filtration, another name for vacuum filtration, is a crystallization technique that is frequently used in chemistry labs to more precisely filter the given sample. General Considerations for Design of Digital Signal Processing.

To learn more about crystallization please click on below link

https://brainly.com/question/1212769

#SPJ4

When chocolate is heated, the cocoa butter crystals dissolve and it becomes liquid; however, if chocolate is heated to a high temperature, it can separate into charred, blackened cocoa particles and pale golden liquid.

The texture, hardness, and gloss of chocolate are influenced by the way in which the various types of molecules are arranged within it. Chocolate melts into a liquid when heated because thermal energy disturbs the substance's ordered crystalline structure.

Similar to how melted butter separates into fats and milk proteins, cocoa butter, which melts between 93 and 101 degrees Fahrenheit/34 and 38 degrees Celsius, separates from the lipids and cocoa particles. The chocolate becomes grainy if it becomes too hot.

To know more about cocoa particles visit:-

https://brainly.com/question/28285713

#SPJ4

If protons (H+) were able to freely move across the mitochondrial membrane, cellular respiration will not occur.

Mitochondria are encased in a double-membrane system made up of inner and outer mitochondrial membranes separated by an intermembranous space. The inner membrane has numerous folds (cristae) that extend into the organelle's interior. In the critical process of oxidative phosphorylation, the electrochemical proton gradient across the inner mitochondrial membrane drives ATP synthesis. This is made possible by the previously mentioned membrane-bound enzyme ATP synthase.

The electron transport chain creates a proton gradient across the inner mitochondrial membrane, causing chemiosmosis to drive ATP synthesis. The proton gradient across the cristae membrane is produced by three large membrane protein complexes of the respiratory chain in the cristae, known as complexes I (NADH/ubiquinone oxidoreductase), III (cytochrome c reductase), and IV (cytochrome c reductase) (cytochrome c oxidase).

To learn more about mitochondrial membrane, here

https://brainly.com/question/1602075

#SPJ4

a salt water is made by dissolving 4bpounds of salt in 18 gallons of water