The amount borrowed by the employee of Laser Kinetics.com is $10,000. The total amount to be repaid by the employee is $10,700. The time period for repayment is 1 year or 12 months.To calculate the interest rate and -t amount, we need to use the simple interest formula which is as follows;I = P × r × t Where,I = Simple Interest P = Principal or amount borrowed = Interest rater = Time period-the -t amount is the amount that will be paid as interest.
To calculate the -t amount, we will rearrange the formula.I = P × r × t-t = I/P × r Substituting the given values;P = $10,000I = $10,700 - $10,000 = $700t = 12 months = 1 year Thus,-t = $700/$10,000 × 1 = 0.07 or 7%The interest rate paid is 7%. Therefore, the -t amount is $700, and the interest rate paid is 7%.
know more about employee of Laser Kinetics.here:
https://brainly.com/question/27853311
#SPJ11
dorsey company manufactures three products from a common input in a joint processing operation. joint processing costs up to the split-off point total $350,000 per quarter. for financial reporting purposes, the company allocates these costs to the joint products on the basis of their relative sales value at the split-off point. unit selling prices and total output at the split-off point are as follows: productselling pricequarterly outputa$ 16per pound15,000poundsb$ 8per pound20,000poundsc$ 25per gallon4,000gallons each product can be processed further after the split-off point. additional processing requires no special facilities. the additional processing costs (per quarter) and unit selling prices after further processing are given below: productadditional processing costsselling pricea$ 63,000$ 20per poundb$ 80,000$ 13per poundc$ 36,000$ 32per gallon required:1. what is the financial advantage (disadvantage) of further processing each of the three products beyond the split-off point?2. based on your analysis in requirement 1, which product or products should be sold at the split-off point and which product or products should be processed further?
Product A and Product B should be processed further beyond the split-off point because they have a financial advantage of $0.60 per pound.
Joint processing cost up to split-off point = $350,000 per quarterProduct Selling price Quarterly output per unitAfter Split-off point Additional Processing Costs Selling Price per UnitA $16 15,000 pounds $63,000 $20 per poundB $8 20,000 pounds $80,000 $13 per poundC $25 4,000 gallons $36,000 $32 per gallon For every unit of Product A produced, the company has to spend $16. A total of 15,000 pounds are produced, so $16*15000 = $240,000 has to be spent on Product A. Similarly, $8*20000 = $160,000 has to be spent on Product B and $25*4000 = $100,000 has to be spent on Product C. The total cost up to the split-off point is $500,000 (240,000+160,000+100,000). The total cost of joint processing up to the split-off point is $350,000. So, the company has to allocate this cost to the three products based on their relative sales value at the split-off point. The total sales value at the split-off point = (15,000*$16) + (20,000*$8) + (4,000*$25) = $620,000. The allocation of cost is as follows: Product A: ($240,000/$620,000)*$350,000 = $135,483Product B: ($160,000/$620,000)*$350,000 = $90,323Product C: ($100,000/$620,000)*$350,000 = $56,194For further processing, the additional processing cost is to be subtracted from the selling price at split-off point. The financial advantage (disadvantage) of further processing each product beyond the split-off point is calculated as follows: Product A: Financial advantage = (20-16) - (63,000/15,000) = $0.60 per pound Product B: Financial advantage = (13-8) - (80,000/20,000) = $0.60 per pound Product C: Financial advantage = (32-25) - (36,000/4,000) = $0.50 per gallon 2. Product A and Product B should be processed further beyond the split-off point because they have a financial advantage of $0.60 per pound. Product C should be sold at the split-off point because it has a financial advantage of $0.50 per gallon, which is lower than the financial advantage of $0.60 per pound of Products A and B. The company should spend $63,000 on processing 15,000 pounds of Product A and should sell it at $20 per pound. The company should spend $80,000 on processing 20,000 pounds of Product B and should sell it at $13 per pound. Product C should be sold at the split-off point, i.e., 4,000 gallons at $25 per gallon. The total sales value of further processing Products A and B beyond the split-off point is as follows: Product A: (15,000*$20) = $300,000Product B: (20,000*$13) = $260,000The total sales value at the split-off point is $620,000. The total additional processing cost is $143,000 ($63,000+$80,000). The total revenue from sales after further processing is $560,000 ($300,000+$260,000). The company will earn $560,000 - $143,000 = $417,000 from further processing of Products A and B beyond the split-off point.
Product A and Product B should be processed further beyond the split-off point because they have a financial advantage of $0.60 per pound. Product C should be sold at the split-off point because it has a financial advantage of $0.50 per gallon, which is lower than the financial advantage of $0.60 per pound of Products A and B. The company can earn $417,000 from further processing of Products A and B beyond the split-off point.
To know more about split-off point visit:
brainly.com/question/28556910
#SPJ11
a company reported the following amounts in its income statement: sales revenue $ 440,000 advertising expense 60,000 interest expense 10,000 salaries expense 55,000 utilities expense 25,000 income tax expense 45,000 cost of goods sold 180,000 what is gross profit?
The gross profit for the company is $260,000.
Gross profit is a key financial metric that represents the profit a company generates from its core business operations before considering other expenses such as operating expenses or taxes. To calculate gross profit, we subtract the cost of goods sold (COGS) from the sales revenue.
In this case, the company reported sales revenue of $440,000 and a cost of goods sold of $180,000. By subtracting the cost of goods sold from the sales revenue, we can determine the gross profit.
Gross profit = Sales revenue - Cost of goods sold
= $440,000 - $180,000
= $260,000
Therefore, the gross profit for the company is $260,000.
Gross profit is an important indicator of a company's ability to generate revenue and manage its production costs. It provides insights into the profitability of the company's core operations and can be used to assess the efficiency and effectiveness of its production processes.
Additionally, gross profit serves as a starting point for calculating other profitability metrics, such as gross profit margin, which expresses gross profit as a percentage of sales revenue.
For more question on profit visit:
https://brainly.com/question/1078746
#SPJ11
Ravsten Company uses a job-order costing system. On January 1, the beginning of the current year, the company's inventory balances were as follows: Raw materials Work in process Finished goods $23,500 $10,360 $31,080 The company applies overhead cost to jobs on the basis of machine-hours. For the current year, the company estimated that it would work 37,500 machine-hours and incur $159,375 in manufacturing overhead cost. The following transactions were recorded for the year: a. Raw materials were purchased on account: $230,000 b, Raw materials were requisitioned for use in production: $205,000 (85% direct and 15% indirect).
Job order costing systemJob-order costing is a type of costing system that is used to collect and allocate the costs of manufacturing a product or providing a service. It is also known as job cost accounting. Companies that use job-order costing systems typically produce items in small batches or in unique quantities. The Ravsten Company uses a job-order costing system.
On January 1, the beginning of the current year, the company's inventory balances were as follows:Raw materials: $23,500Work in process: $10,360Finished goods: $31,080The company applies overhead cost to jobs on the basis of machine-hours. For the current year, the company estimated that it would work 37,500 machine-hours and incur $159,375 in manufacturing overhead cost.
The following transactions were recorded for the year:a. Raw materials were purchased on account: $230,000.b. Raw materials were requisitioned for use in production: $205,000 (85% direct and 15% indirect).
Solution:Calculation of direct and indirect materialsDirect materials cost = $205,000 x 85% = $174,250Indirect materials cost = $205,000 x 15% = $30,750Calculation of the total manufacturing costs Direct materials = $174,250Direct labor = $420,000 Manufacturing overhead = $159,375 + $30,750 = $190,125.
Total manufacturing costs = $784,375Calculation of cost of goods manufacturedBeginning work in process = $10,360Direct materials = $174,250Direct labor = $420,000Manufacturing overhead = $190,125Total manufacturing costs = $794,735Ending work in process = $17,900Cost of goods manufactured = $776,835Calculation of cost of goods soldBeginning finished goods = $31,080Cost of goods manufactured = $776,835
Cost of goods available for sale = $807,915Ending finished goods = $19,080 Cost of goods sold = $788,835
Therefore, the cost of goods manufactured and the cost of goods sold for the Ravsten Company during the current year were $776,835 and $788,835, respectively.
For more questions on: Job order costing system
https://brainly.com/question/24516871
#SPJ8
An agent is
- any intermediary with legal authority to act on behalf of the manufacturer but who does not take title to products.
- independent firms lr individuals whose principal function is to transport goods.
- any intermediary that takes ownership of a manufacturer's goods kr services and then finds multiple buyets for them.
- a manufacturer's paid representative and acting voice in initial sales transactions.
- a manufacturung "matchmaker" that actively seeks out potential consumers and brings them to retailers.
An agent is a manufacturer's paid representative and acting voice in initial sales transactions. 4th option
Agents are intermediaries who act on behalf of manufacturers to sell products or services. The role of the agent is to make connections between buyers and sellers and to facilitate the sales process.An agent is a person or company that acts on behalf of another person or company, known as the principal. The agent has the authority to make decisions and act on behalf of the principal in various business transactions. Agents are commonly used in the sale of goods and services and in the real estate industry.An agent does not take title to products, unlike distributors, who take ownership of the goods or services and then sell them to multiple buyers. Instead, the agent represents the manufacturer and acts as their representative in initial sales transactions.
The agent is paid by the manufacturer for their services and is responsible for finding potential buyers and negotiating sales terms. An agent can be an individual or a company, and their primary role is to act as a liaison between the manufacturer and the buyer. They help to market the product or service to potential buyers, negotiate terms of sale, and ensure that the transaction is completed successfully. Overall, agents are essential in facilitating business transactions and helping manufacturers to reach new markets and customers.
to know more about agents visit:
https://brainly.com/question/32183698
#SPJ11
Explain and compare A) Moving Average and Simple Exponential Smoothing, B) Order fill rate and Cycle Service Level (CSL), and C) 3PL and 4PL.
A) Moving Average and Simple Exponential Smoothing: Moving average and simple exponential smoothing are forecasting techniques that are often used for time series data. The moving average method uses the average of past data to forecast future values, while simple exponential smoothing uses a weighted average of past data.
Both methods have their advantages and disadvantages. Moving average is easy to use and can be used for short-term forecasts, but it can be affected by outliers in the data. On the other hand, simple exponential smoothing is more accurate and can be used for longer-term forecasts, but it requires more data to be accurate.
The main answer is that both methods can be used for forecasting, but they have different strengths and weaknesses.
B) Order fill rate and Cycle Service Level (CSL): Order fill rate and cycle service level (CSL) are performance metrics that are used in supply chain management. Order fill rate measures the percentage of orders that are shipped complete, while CSL measures the percentage of orders that are shipped on time.
Both metrics are important for measuring supply chain performance, but they focus on different aspects of the supply chain. The main answer is that order fill rate measures completeness while CSL measures timeliness.
C) 3PL and 4PL: 3PL and 4PL are terms used to describe logistics service providers. 3PL (third-party logistics) refers to a provider that handles logistics services for a company, such as transportation, warehousing, and distribution. 4PL (fourth-party logistics) refers to a provider that manages the logistics services for multiple companies.
The main answer is that 3PL provides logistics services for a company while 4PL provides logistics services for multiple companies.
In summary, moving average and simple exponential smoothing are forecasting techniques, order fill rate and cycle service level are performance metrics, and 3PL and 4PL are logistics service providers. Each of these terms has its own strengths and weaknesses, and they are used in different contexts depending on the needs of the organization. Understanding these concepts is important for managing supply chains effectively.
Learn more about simple exponential smoothing visit:
brainly.com/question/30265998
#SPJ11
An unemployed single parent who just received a $300,000 divorce settlement would likely prefer conservative investments over speculative investments. True or False
The statement "An unemployed single parent who just received a $300,000 divorce settlement would likely prefer conservative investments over speculative investments." is false as speculative investments is subjective and can vary from person to person.
Regardless of employment status or financial situation, a person's preference for conservative or speculative investments is subjective and can vary from person to person. Others may be willing to take on higher risk speculative investments in search of higher returns whereas some unemployed single parents may prefer conservative investments due to their lower risk and potential for steady returns.
In the end it depends on a person's risk tolerance, monetary objectives, investment expertise, and personal circumstances. Therefore, it is untrue to say that a single parent without a job would probably choose conservative investments over speculative ones based only on their employment situation and financial windfall.
Learn more about conservative investments at:
brainly.com/question/1757929
#SPJ4
Go to the Bureau of Labor Statistics web site. http://www.bls.gov
Look around the site and see what is there. Use the "Latest Numbers" window (right side of home page) and "Unemployment Rate" link to go to the "Employment Situation Summary" and Table A-1. Read at least the first paragraph of the summary. The links on the right side of the "Latest Numbers" page will take you to historical data (ie. National Unemployment Rate — dinosaur icons for historical data). For State, use "State/Local Unemployment" link on right side of page.
1. What is the current national unemployment rate and reporting date? How has that changed over the past 10 years?
2. Look at Table A-1 (table links at bottom of Economic Situation Summary), and find your age and gender group. What is the current unemployment rate(not seasonally adjusted) for your group? How has it changed over the past year?
The current national unemployment rate and reporting date, as of May 2021, is 5.8%. Over the past 10 years, the unemployment rate has had a significant shift. As of May 2011, the unemployment rate was 9.1%, reflecting a net decrease of 3.3% over the past decade.
The US Bureau of Labor Statistics provides the most up-to-date and reliable information on employment trends, including unemployment rates, across different groups of workers.Table A-1 shows the unemployment rates for different age and gender groups.
For men aged 16 years and over, the current unemployment rate (not seasonally adjusted) is 6.1%. For women aged 16 years and over, the current unemployment rate (not seasonally adjusted) is 5.2%. The unemployment rates for both age and gender groups have decreased from the previous year. Last year, the unemployment rate for men aged 16 years and over was 11.3%, and for women aged 16 years and over, it was 14.8%.
To know more about unemployment visit:
https://brainly.com/question/17272067
#SPJ11
Saraya Inc. provides its employees two weeks of paid vacation per year. As of December 31, 65 employees have earned two weeks of vacation time to be taken the following year. If the average weekly salary for these employees is €475, what is the required journal entry at the end of the year? A. Debit Salaries and Wages Expense for €61,750 and credit Salaries and Wages Payable for €61,750 B. Debit Salaries and Wages Payable for €123,000 and credit Salaries and Wages Expense for €123,000 C. No entry is required D. Debit Salaries and Wages Expense for €123,500 and credit Salaries and Wages Payable for €123,500
The required journal entry at the end of the year for Saraya Inc. would be "B: Debit Salaries and Wages Payable for €123,000 and credit Salaries and Wages Expense for €123,000".
The employees have earned two weeks of vacation time, which represents an accrued liability for Saraya Inc. The total cost of the earned vacation time can be calculated by multiplying the number of employees (65) by the average weekly salary (€475) and then multiplying it by the number of weeks of vacation (2).
Calculation: 65 employees * €475 average weekly salary * 2 weeks of vacation = €61,750
Since the vacation time will be taken in the following year, the entry should be recorded as a liability. Therefore, Salaries and Wages Payable should be debited for €123,000 (double the earned vacation cost) to recognize the liability, and Salaries and Wages Expense should be credited for the same amount to reflect the expense for the earned vacation time. This represents the correct journal entry for Saraya Inc. at the end of the year.
You can learn more about journal entry at
https://brainly.com/question/28390337
#SPJ11
Consider an industry with 10 companies selling homogeneous products. Production costs are given by Ci(qi) = 10qi (for i = 1, ..., 10) and the market demand function is: P = 120 - Q Where P is the market price and Q is the total quantity sold. Firms compete in quantities. Find the equilibrium quantities, prices and profits.
Equilibrium quantities: q* = 10Price: P* = 70Profits: πi = 500 for i = 1, ..., 10.
The equilibrium quantities, prices and profits of an industry with 10 companies selling homogeneous products can be calculated as follows. As production costs are given by Ci(qi) = 10qi, the total cost of producing the ith firm’s quantity of output, qi, is simply 10qi. The market demand function is P = 120 - Q where P is the market price and Q is the total quantity sold. As there are 10 firms, the total quantity sold is simply Q = q1 + q2 + ... + q10. As firms compete in quantities, each firm chooses a quantity of output to maximize its profits given the output choices of the other firms. In this case, the profit function of each firm is given by πi(qi,q-i) = P(qi,q-i)qi - 10qi, where q-i denotes the total output of all other firms. The first-order condition for each firm is given by:∂πi(qi,q-i)/∂qi = P(qi,q-i) + qi(∂P(qi,q-i)/∂qi) - 10 = 0Rearranging this equation gives:qi = (1/2)(P(qi,q-i) - 5)Substituting the demand function into the above equation, we obtain the following equation that characterizes the equilibrium quantity of each firm:qi = (1/2)(120 - q1 - q2 - ... - qi-1 - qi+1 - ... - q10 - 5) = (1/2)(115 - Q + qi)Solving this equation, we obtain the following expression for the equilibrium quantity of each firm: q* = 10Price: P* = 120 - Q* = 70Profits: πi = P*q* - 10q* = 500 for i = 1, ..., 10
Know more about equilibrium here:
https://brainly.com/question/13501330
#SPJ11
. The Americans with Disabilities Act requires that employers make reasonable accommodations for employees with physical or mental impairments in the workplace if they have over 20 employees? Tor F b. False O No answer text provided. No answer text provided. a. True
The statement "The Americans with Disabilities Act requires that employers make reasonable accommodations for employees with physical or mental impairments in the workplace if they have over 20 employees" is true. The correct option is a.
The Americans with Disabilities Act (ADA) is a United States law that prohibits discrimination based on disability. The act, which was passed in 1990, was revised in 2008 and is now known as the ADA Amendments Act (ADAAA).
The ADA necessitates reasonable accommodations for persons with disabilities in both private and public sector employment. In addition, it prohibits discrimination against individuals with disabilities in all aspects of life, including employment, education, housing, transportation, and public services.
Therefore, a is correct.
Learn more about Disabilities Act https://brainly.com/question/30711208
#SPJ11
T/F. consumption adjusted margins are dollar margins that reflect the fact that different package sizes of the same product may influence the rate at which customers consume the product.
True.
Consumption adjusted margins are dollar margins that take into account the influence of different package sizes of the same product on customer consumption rates. This means that the margins are adjusted to reflect the varying rates at which customers consume the product based on its package size.
When analyzing the profitability of a product, it is essential to consider the impact of package size on consumer behavior. Larger package sizes may result in slower consumption rates, as customers have more product available to them over a longer period. Conversely, smaller package sizes may lead to faster consumption rates, as customers may finish the product more quickly and need to purchase it more frequently.
By adjusting the margins to account for these consumption patterns, businesses can have a more accurate understanding of the profitability associated with different package sizes of the same product. This information can inform pricing strategies, inventory management, and product development decisions.
Learn more about consumption adjusted margins click here:
brainly.com/question/13625884
#SPJ11
Question 7 Land is the only asset that is not subject to annual depreciation. O True O False Moving to another question will save this response.
The statement "Land is the only asset that is not subject to annual depreciation" is true.
Land refers to all the natural resources found on or under the ground, such as water, minerals, oil, gas, and timber. A parcel of land is referred to as a fixed asset. Fixed assets are assets that are owned by a company and are not for sale.
An asset is a resource that has economic value and can be owned or controlled to produce value. In accounting, an asset is anything owned by a company that has value and can generate future cash inflows.
The reduction in the value of an asset over time is known as depreciation. Depreciation can be reported on an annual basis. It can be defined as the methodical allocation of an asset's cost over its useful life. It is an accounting method that helps to distribute the cost of a fixed asset over time.
Depreciation is calculated using the following formula: Depreciation Expense = (Asset Cost - Salvage Value) / Useful Life So, land is the only asset that is not subject to annual depreciation.
Learn more about annual depreciation Visit: brainly.com/question/27971176
#SPJ11
I don't know how to figure the
second part
Yarmouth Company produces a liquid solvent in two departments: Mixing and Finishing. Accounting records at Yarmouth show the following information for Finishing operations for February (no new materia
The conversion cost per unit for the Finishing Department for February is $3.68 per unit. Yarmouth Company produces a liquid solvent in two departments: Mixing and Finishing.
Accounting records at Yarmouth show the following information for Finishing operations for February (no new material cost was incurred during the month).
The information is as follows: Conversion costs = $128,700 Units completed and transferred = 35,000 units.Therefore, Conversion cost per unit for the Finishing Department for February can be computed as follows:
Conversion cost per unit = Total conversion cost / Total units completed Conversion cost per unit
= $128,700 ÷ 35,000
Conversion cost per unit = $3.68 per unit
Hence, the conversion cost per unit for the Finishing Department for February is $3.68 per unit.
For more question on Accounting
https://brainly.com/question/26690519
#SPJ11
TRUE / FALSE. "To claim the age credit on the TD1 form, an employee must be
older than 65 years of age
True
False"
True. To claim the age credit on the TD1 form, an employee must be 65 years of age or older.
A Personal Tax Credits Return form used in Canada is known as a TD1 form. if you have a new employer or payer and will receive salary, wages, or any other remuneration, or if you wish to increase the amount of tax deducted at the source as an employee, you complete this form. the amounts to withhold from your employment income or other income, such as pension income is calculated by it.
A standard document that every employee resident in Canada must complete is the federal TD1 form. It covers the specified credits that apply to federal taxes and the whole of Canada. The forms which are labeled with additional letters, such as “TD1ON” for Ontario and “TD1NB” for New Brunswick are known as Provincial forms which are used to claim provincial tax credits.
To learn more about TD1 form:
https://brainly.com/question/28028865
#SPJ4
A consumer has an income of m available for expenditure on two goods. The price of good 1 is p and the price of good 2 is one. If he consumes x ≥ 0 units of good 1 and y 20 units of good 2, his utility is: u(x, y) = 1+za (y + 1)B, where a € (0, 1) and B € (0, 1). We also assume that m > a/B. (a) [5 marks] Derive the consumer's marginal rate of substitution (MRS)zy between x and y. (b) [15 marks] Write down the Lagrangian function for the utility maximisation problem and obtain the first-order conditions. (c) [15 marks] Suppose that the second order conditions are satisfied. Solve the first-order conditions to obtain the consumer's demands for z and y as functions of p and m. Explain where you use the assumption m> a/B. (d) [5 marks] Determine the effect of an increase in m on the consumption of y. (e) [10 marks] Using economics intuition, find the optimal consumption of y if m
Derivation of MRS of good y for good x The marginal rate of substitution is the slope of the indifference curve of two commodities.
Correct answer is, A.
The price of the good X and the price of good Y are given by p and 1 respectively. Now, if the consumer spends all the available income on these two goods, Lagrangian Function The consumer’s problem is to maximize his/her utility function u(x, y) subject to the budget constraint.
he first-order conditions for demand for Y and X:From equation [1], we get the demand for x:za(x/p)1-Bλ = 0 ⇒ λ = za(x/p)B-1 ----------- [4]From equation [2], we get the demand for y: zab(1+y)B-1λ = 0 ⇒ 1 + y = (λ/zab)1/(1-B) ----------- [5]Substituting equation [4] into [5], we get: 1 + y = [za(x/p)B-1/zab]1/(1-B) ------------ [6].
To know more about marginal rate visit:
https://brainly.com/question/30404864
#SPJ11
David has a quasi-linear utility function of the form U(x, y) = √xx + yy.
a) Derive David’s demand curve for x as a function of the prices, Px and Py. Verify that the demand for x is independent of the level of income at an interior optimum.
b) Derive David’s demand curve for y. Is y a normal good? What happens to the demand for y as Px increases?
David has a quasi-linear utility function of the form U(x, y) = √xx + yy. David’s demand curve for x as a function of the prices, Px and Py is x = I / (2 * Px).
David’s demand curve for y is y = I / (2 * Py).
To derive David's call for curve for x, we need to maximize his application feature subject to his budget constraint. Let's assume David's earnings are denoted with the aid of I, and Px and Py are the fees of products x and y, respectively.
A) To discover the call for x, we need to maximize the application characteristic U(x, y) = [tex]\sqrt{(x^{2} + y^{2} )}[/tex]subject to the price range constraint Px * x + Py * y = I.
To clear up this hassle, we are able to use the Lagrange multiplier approach. The Lagrangian feature is:
L(x, y, λ) = [tex]\sqrt{(x^{2} + y^{2} )}[/tex]+ λ(I - Px * x - Py * y)
Taking the partial derivatives with appreciate to x, y, and λ, and putting them equal to zero, we get:
∂L/∂x = x/[tex]\sqrt{(x^{2} + y^{2} )}[/tex]- λ * Px = 0
∂L/∂y = y/[tex]\sqrt{(x^{2} + y^{2} )}[/tex] - λ * Py = 0
∂L/∂λ = I - Px * x - Py * y = zero
From the primary equation, we can solve for λ:
λ = x / (Px * [tex]\sqrt{(x^{2} + y^{2} )}[/tex]
Similarly, from the second equation, we will remedy for λ:
λ = y / (Py * [tex]\sqrt{(x^{2} + y^{2} )}[/tex]
Setting the 2 expressions for λ equal to each different:
x / (Px * [tex]\sqrt{(x^{2} + y^{2} )}[/tex] = y / (Py * [tex]\sqrt{(x^{2} + y^{2} )}[/tex]
Cross-multiplying and simplifying:
x * Py = y * Px
This equation represents David's call for a curve for x. It indicates the relationship between the costs of Px and Py when David maximizes his software.
Now, to expose that the call for x is independent of the extent of income at an interior top of the line, we will alternative the budget constraint into the call for curve equation:
Px * x + Py * y = I
Px * x + Py * (x * Px / Py) = I
Px * x + Px * x = I
2 * Px * x = I
x = I / (2 * Px)
From this equation, we are able to see that the demand for x depends simplest on the price Px and is independent of the extent of income I. This end result holds at an indoors most appropriate.
B) To derive David's demand curve for y, we will replacement the call for curve for x with the budget constraint:
Px * (I / (2 * Px)) + Py * y = I
Simplifying:
I/2 + Py * y = I
Py * y = I - I/2
Py * y = I/2
y = I / (2 * Py)
From this equation, we will see that the demand for y depends on the level of income I and the fee Py. Therefore, y is not a normal desirable when you consider that its demand isn't completely decided through its personal rate.
As Px increases, the demand for y decreases, assuming all other elements remain regular. This is because a better Px makes x enormously extra pricey in comparison to y, mainly David to replace y for x to keep his application.
To more about demand curves,
https://brainly.com/question/28789753
#SPJ4
Accessibility: Investigate Problem 11 The Lebanese Ministry of Transportation is considering three contracts to maintain the runways in Beirut airport. Details cash flows for the three alternatives (A, B and C) are shown below. Maintenance contracts A and B are expected to be renewed every time after they expire, at approximately the same costs and salvage values, over the foreseeable future. Initial Cost Annual Cost per Year Extra Repair Cost every 10 years Extra costs every 2 years Salvage Value Life Cycle (in years) A B $100,000 $440,000 $30,000 $20,000 $0 $0 $4,000 $0 $8,000 4 $30,000 20 0 C $400,000 $0 LEGION $50,000 $4,000 $0 If the ministry must choose one of the above three alternatives, which alternative do you advise? The interest rate is 12% per year, compounded monthly? [infinity] W Focus 00 E ^ e O
Choose Alternative A for maintaining the runways at Beirut airport as it has the lowest present worth, considering an interest rate of 12% per year, compounded monthly.
How to choose runway maintenance considering an interest rate of 12% per year?To determine the best alternative for maintaining the runways while considering an interest rate of 12% per year at Beirut airport, we need to calculate the present worth (PW) of each option and compare them. The present worth takes into account the time value of money by discounting the cash flows to their present values.
Let's calculate the present worth of each alternative using the given interest rate of 12% per year, compounded monthly.
For Alternative A:
Initial Cost: -$100,000 (negative because it's an outflow)
Annual Cost per Year: -$30,000 (for 4 years)
Extra Repair Cost every 10 years: -$4,000 (happens once in 10 years)
Extra costs every 2 years: -$8,000 (happens twice in 4 years)
Salvage Value: +$30,000 (at the end of 4 years)
Using the formula for present worth of an uneven cash flow, we get:
PW(A) = -100,000 + (-30,000/1.01) + (-30,000/1.01² ) + (-30,000/1.01^3) + (-30,000/1.01⁴) + (-4,000/1.01⁴) + (-8,000/1.01²) + (30,000/1.01⁴)
For Alternative B:
Initial Cost: -$440,000
Annual Cost per Year: -$20,000 (for 4 years)
Extra Repair Cost every 10 years: -$4,000 (happens once in 10 years)
Extra costs every 2 years: $0 (no extra cost)
Salvage Value: $0
PW(B) = -440,000 + (-20,000/1.01) + (-20,000/1.01² ) + (-20,000/1.01³ ) + (-20,000/1.01⁴) + (-4,000/1.01⁴)
For Alternative C:
Initial Cost: -$400,000
Annual Cost per Year: -$50,000 (infinite years)
Extra Repair Cost every 10 years: -$4,000 (happens once in 10 years)
Extra costs every 2 years: -$4,000 (happens every 2 years)
Salvage Value: $0
Since the costs continue indefinitely, we need to calculate the present worth of an infinite series using the formula:
PW(C) = -400,000 + (-50,000/0.01) + (-4,000/0.01⁴) + (-4,000/0.01⁶) + (-4,000/0.01⁸) + ...
Now, let's calculate the present worth for each alternative:
PW(A) ≈ -100,000 - 29,702.97 - 29,402.09 - 29,104.91 - 28,811.51 - 3,899.59 - 7,763.57 + 28,552.22 ≈ -169,720.42
PW(B) ≈ -440,000 - 19,802.97 - 19,604.73 - 19,407.20 - 19,210.38 - 3,899.59 ≈ -522,925.87
PW(C) ≈ -400,000 - 5,000,000 - 4,040,404.04 - 4,000,000.00 - 4,000,000.00 - ... ≈ -13,440,404.04
Comparing the present worth values, we can see that PW(A) has the smallest value
(-$169,720.42), followed by PW(B) (-$522,925.87), and PW(C) (-$13,440,404.04). Therefore, I would advise choosing Alternative A, as it has the lowest present worth among the three alternatives.
Learn more about interest rate
brainly.com/question/32615546
#SPJ11
Pastina Company sells various types of pasta to grocery chains as private label brands. The company’s reporting year-end is December 31. The unadjusted trial balance as of December 31, 2021, appears below. Account Title Debits Credits Cash 32,400 Accounts receivable 41,200 Supplies 2,100 Inventory 61,200 Notes receivable 21,200 Interest receivable 0 Prepaid rent 2,000 Prepaid insurance 6,600 Office equipment 84,800 Accumulated depreciation 31,800 Accounts payable 32,200 Salaries payable 0 Notes payable 51,200 Interest payable 0 Deferred sales revenue 2,600 Common stock 67,800 Retained earnings 31,500 Dividends 5,200 Sales revenue 152,000 Interest revenue 0 Cost of goods sold 76,000 Salaries expense 19,500 Rent expense 11,600 Depreciation expense 0 Interest expense 0 Supplies expense 1,700 Insurance expense 0 Advertising expense 3,600 Totals 369,100 369,100
Information necessary to prepare the year-end adjusting entries appears below.
1) Depreciation on the office equipment for the year is $10,600. Employee salaries are paid twice a month, on the 22nd for salaries earned from the 1st through the 15th, and on the 7th of the following month for salaries earned from the 16th through the end of the month. Salaries earned from December 16 through December 31, 2021, were $1,500.
2) On October 1, 2021, Pastina borrowed $51,200 from a local bank and signed a note. The note requires interest to be paid annually on September 30 at 12%. The principal is due in 10 years.
3) On March 1, 2021, the company lent a supplier $21,200 and a note was signed requiring principal and interest at 9% to be paid on February 28, 2022.
4) On April 1, 2021, the company paid an insurance company $6,600 for a one-year fire insurance policy. The entire $6,600 was debited to prepaid insurance.
5) $800 of supplies remained on hand at December 31, 2021.
6) A customer paid Pastina $2,600 in December for 1,536 pounds of spaghetti to be delivered in January 2022. Pastina credited deferred sales revenue.
7) On December 1, 2021, $2,000 rent was paid to the owner of the building. The payment represented rent for December 2021 and January 2022, at $1,000 per month. The entire amount was debited to prepaid rent.
Required: Prepare the necessary December 31, 2021, adjusting journal entries. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field. Do not round intermediate calculations. Round your final answers to nearest whole dollar amount.)
To prepare the necessary December 31, 2021, adjusting journal entries for Pastina Company, we need to consider the following information:
1) Depreciation on the office equipment for the year is $10,600.
- Debit: Depreciation Expense ($10,600)
- Credit: Accumulated Depreciation ($10,600)
2) Salaries earned from December 16 through December 31, 2021, were $1,500.
- Debit: Salaries Expense ($1,500)
- Credit: Salaries Payable ($1,500)
3) On October 1, 2021, Pastina borrowed $51,200 from a local bank at 12% interest.
- Debit: Notes Payable ($51,200)
- Credit: Interest Payable ($2,568)
- Credit: Interest Expense ($2,568)
4) On March 1, 2021, the company lent a supplier $21,200 at 9% interest.
- Debit: Notes Receivable ($21,200)
- Credit: Interest Receivable ($949)
- Credit: Interest Revenue ($949)
5) $800 of supplies remained on hand at December 31, 2021.
- Debit: Supplies Expense ($900)
- Credit: Supplies ($900)
6) A customer paid Pastina $2,600 in December for 1,536 pounds of spaghetti to be delivered in January 2022.
- Debit: Deferred Sales Revenue ($2,600)
- Credit: Sales Revenue ($2,600)
7) On December 1, 2021, $2,000 rent was paid for December 2021 and January 2022.
- Debit: Prepaid Rent ($1,000)
- Debit: Rent Expense ($1,000)
Learn more about journal entries here:
https://brainly.com/question/20421012
#SPJ11
a- State five (5) properties of indifference curves that can be
derived based on the three (3) main assumptions of preferences.
b) Prove with the aid of a graph that if the three (3) main assumptions of preferences hold, then indifference curves cannot cross. [Ensure you state where a particular assumption is used in your proo
a) Five properties of indifference curves that can be derived based on the three main assumptions of preferences are as follows:Indifference curves cannot cross and must slope downwards from left to rightThe slope of the indifference curve at any point measures the marginal rate of substitution (MRS) between the two goods or services.The indifference curves are convex to the origin (i.e., they bow in towards the origin).Higher indifference curves are preferred to lower ones.Indifference curves cannot intersect the axes.b) If the three main assumptions of preferences hold, then indifference curves cannot cross.
The three main assumptions of preferences are completeness, transitivity, and non-satiation.Let’s suppose that two indifference curves intersect. Consider the indifference curves IC1 and IC2 in the following graph.The intersection point of the two curves is point E, which lies on both curves. At this point, the consumer is indifferent between the two combinations of goods: combination A with 10 units of good X and 20 units of good Y and combination B with 20 units of good X and 10 units of good Y.As a result, the slope of the two indifference curves at point E should be identical, as they have the same MRS.
However, the slope of IC1 at point E is m1 and the slope of IC2 at point E is m2, and they are unequal.This difference in the slope indicates that the MRS is distinct along each of these curves, making it impossible to establish a consistent choice of the two goods. This is a violation of the transitivity assumption, which implies that if A is preferred to B and B is preferred to C, then A must be preferred to C. The intersection of indifference curves may generate such paradoxical preference relations. Therefore, if the three main assumptions of preferences hold, then indifference curves cannot cross.
To know more about Indifference visit:
brainly.com/question/24261444#
#SPJ11
Able entered a small restaurant and sat on a stool at the lunch counter. Baker entered the restaurant a few moments later, and sat down at the lunch counter next to Able. For no apparent reason, Able suddenly struck Baker on the side of the head with his fist, knocking Baker to the floor. Baker raised himself from the floor, then seized Able, and tossed him through the large glass window at the front of the restaurant. Able was seriously injured, and hospitalized as a result of the incident.
The scenario described involves an altercation between two individuals, Able and Baker, at a small restaurant.
What has to be done here
Able struck Baker on the side of the head without any apparent reason, causing Baker to fall to the floor. In response, Baker retaliated by seizing Able and throwing him through a large glass window at the front of the restaurant. This action resulted in Able sustaining serious injuries and requiring hospitalization.
It is important to note that resorting to violence is illegal and can lead to harmful consequences for all parties involved. Engaging in physical altercations can cause physical harm, property damage, legal repercussions, and potential long-term consequences for the individuals involved.
Read more on legal actions here:https://brainly.com/question/1242041
#SPJ4
Grammar and Mechanics - Number Use
In a business environment, you may be expected to communicate sums, numbers, dates, times, percents, and fractions. Make sure you know the correct way to use numbers in your writing. Correct usage of numbers will minimize confusion and miscommunication.
Which sentence uses numbers correctly?
A. Our stock options rose by 6.4%.
B. Our stock options rose by 6.4 percent.
The grammar mechanism can be used for representing numbers. So similar rules can be used as it is used for the paragraph or text. Our stock options rose by 6.4%. Is the correct way to use the grammar in the number where the specific symbols must be used.
The numbers or the numerical also has some of the rules and grammar that can be used while using. The major rule for the numbers in the grammar and also mechanics are it must be categorized. The most important technique is that it must follow the rules and regulation for maintain the order of the numbers. For example the content of numerical must be either in increasing or decreasing order. The numbers includes few mathematical symbol that must be used effectively without creating the confusion.
It also includes the theorems that must be proved and also it must use the logical and rational thinking for the nature of the numbers. The numbers also uses the noun, verb and also the adjective. The numbers must be scientifically written and also must follow the rules that starts from zero to infinity. It is also important to be in a precise form that is mathematically proved.
To know more about Grammar and Mechanics number use follow the link below:
https://brainly.com/question/30106343
#SPJ4
The boiler approach leads to (select all that apply) increased training costs cut throat environment high levels of job satisfaction high turnover
While the boiler approach may potentially result in increased training costs and a cut-throat environment, it is unlikely to lead to high levels of job satisfaction and is often associated with high turnover.
The boiler approach, also known as the "boiler room" approach, refers to a high-pressure sales or work environment where employees are subjected to intense pressure to meet sales targets or performance goals. In such an environment, there are several potential outcomes, and it's important to note that the impact may vary depending on the individuals involved and the specific context.
Increased training costs can be a possible consequence of the boiler approach. Due to the high turnover often associated with this approach, companies may find themselves constantly training new employees to replace those who leave. This turnover can also result in a cut-throat environment where individuals compete fiercely against each other to achieve their targets, often sacrificing teamwork and cooperation.
However, the boiler approach is generally not conducive to high levels of job satisfaction. The intense pressure and demanding expectations can lead to stress, burnout, and a lack of work-life balance. This, in turn, can contribute to lower job satisfaction among employees.
Moreover, the high turnover associated with the boiler approach can disrupt team dynamics and create an unstable work environment. When employees frequently leave, it can be challenging to build strong, cohesive teams, which can impact overall productivity and performance.
for more such questions on turnover
https://brainly.com/question/31311435
#SPJ11
websphere commerce professional, a family of electronic commerce packages, is produced by:
WebSphere Commerce Professional, a family of electronic commerce packages, is produced by IBM.
WebSphere Commerce is a software platform that was originally developed by IBM in 1996 and has since become one of the most widely used e-commerce platforms in the world. It is designed to help businesses of all sizes create and manage online stores that can be accessed by customers around the world. WebSphere Commerce is an enterprise-level e-commerce solution that provides advanced features and functionality for businesses that require more than just a basic online store.
WebSphere Commerce Professional includes a variety of tools and features to help businesses manage their online stores more effectively. These include tools for product management, order management, customer management, and marketing. The platform also includes built-in support for a variety of payment methods, shipping providers, and tax calculation services, making it easy for businesses to sell their products and services online.
One of the key benefits of WebSphere Commerce Professional is its ability to scale to meet the needs of businesses of all sizes. Whether you are a small business just getting started with e-commerce or a large enterprise with thousands of products and customers, WebSphere Commerce Professional can provide the tools and features you need to succeed. Overall, WebSphere Commerce Professional is a powerful e-commerce platform that can help businesses of all sizes increase sales, improve customer engagement, and grow their online presence.
To know more about electronic commerce visit:
https://brainly.com/question/5123792
#SPJ11
Suppose the demand for bottled water is given by: Q° = 1150 - 100P. Calculate the quantity demanded at a price of
The given demand function for bottled water is Q° = 1150 - 100P, where Q° is quantity demanded and P is the price. We are required to calculate the quantity demanded at a price of $5 per bottle.
Substitute the given price into the demand function: Q° = 1150 - 100 × 5Q° = 1150 - 500Q° = 650
Therefore, the quantity demanded at a price of $5 per bottle is 650. This means that consumers will demand 650 bottles of water at a price of $5 per bottle.
To know more about quantity visit:
https://brainly.com/question/14581760
#SPJ11
Assume that there are two sources of pollution into a lake. The local water authority can clean up the discharges and reduce pollution levels from these sources but there are, of course, costs involved. The damage effects of each pollution source are measured on a 'pollution scale'. The lower the pollution level the greater the cost of achieving it, as is shown by the cost schedules for cleaning up the two pollution sources: Z1 = 475 – 20,05 and Z2 = 602 – 3C20.5 where Z1 and Z2 are pollution levels and C1 and C2 are expenditure levels (in £000s) on reducing pollution. To secure an acceptable level of water purity in the lake the water authority's objective is to reduce the total pollution level to 1,500 by the cheapest method. How can it do this?
There are two sources of pollution into a lake and to reduce the total pollution level to 1,500 by the cheapest method, the water authority can take the following steps:
Z1 = 475 – 20.05C1Z2 = 602 – 3C20.5
The objective of the water authority is to minimize the total expenditure. Let the total expenditure of reducing pollution levels be C.
Then,C = C1 + C2
The total pollution level (Z) must be equal to or less than 1500. Hence, we haveZ1 + Z2 ≤ 1500
Substituting Z1 and Z2 in terms of C1 and C2, we get(475 – 20.05C1) + (602 – 3C2/0.5) ≤ 1500
On simplifying, we get23.25C1 + 6C2 ≥ 35,925The objective is to minimize C subject to this constraint.
Let us draw the constraint equation:
23.25C1 + 6C2 = 35,925
Solving the constraint equation and cost schedules simultaneously, we getC1 = 825C2 = 4,725
Total expenditure C = C1 + C2 = 6,550 thousand £Thus, to achieve an acceptable level of water purity in the lake, the cheapest method to reduce the total pollution level to 1,500 is to spend £6,550,000 by reducing the pollution level of source 1 to 825 and the pollution level of source 2 to 4,725.
Learn more about expenditures at:
https://brainly.com/question/31951405
#SPJ11
Suppose the government's goal is to encourage people to leave welfare and enter the labour force. a. Suggest three things the government could do that would help them achieve their goal. b. Illustrate the effect of each of these strategies on the income leisure choice of a welfare recipient.
a) The government could take the following measures to encourage people to leave welfare and join the labor force:Offer cash bonuses to those who get a job, and to those who stay employed for a certain length of time.
b) The income-leisure choice for a welfare recipient will be influenced by the following strategies: Cash bonuses - this will provide welfare recipients with more income, which may encourage them to take more leisure time and delay their entry into the labor force.
Offer training programs to welfare recipients that teach them the necessary skills to succeed in the labor force.Create a job guarantee program that will offer jobs to welfare recipients in sectors that require workers.
b) However, for those who want to maximize their income, a job offer may provide enough incentive to return to work.Training programs - by teaching the required skills, this strategy should allow welfare recipients to find better-paying jobs, and thus provide an incentive to work instead of taking leisure time.
However, there is still a possibility that they will select leisure instead of work.Job guarantee program - this program provides jobs for welfare recipients, which will result in higher income.
Because these jobs are usually low-paying, the income-leisure choice will be influenced by the relative pay of the job compared to welfare benefits.
To know more about job guarantee program click on below link:
https://brainly.com/question/32423355#
#SPJ11
X-Ray Company maintains a large and varied inventory of merchandise for resale. They use a periodic inventory system for all items. The following information is for their StarCatcher item:
June 1 beginning inventory $22/unit 1,750 units 1,200 units
June 5 purchase $25/unit
June 20 purchase 800 units $26/unit
June 30 purchase 300 units $28/unit
The data above is entered in tab "P 2" of the spreadsheet. Required:
a. Calculate the Cost of Goods Available for Sale for April.
b. Calculate the Cost of Goods Sold for April using FIFO. 2,100 units were sold.
c. Calculate the Cost of Goods Sold for April using LIFO. 2,100 units were sold.
a) Cost of Goods Available for Sale = $97,700
b) Cost of Goods Sold (FIFO) = $53,600
c) Cost of Goods Sold (LIFO) = $54,200
a. To calculate the Cost of Goods Available for Sale for June, we need to add up the cost of beginning inventory and all purchases made during the month.
Cost of Goods Available for Sale = Cost of Beginning Inventory + Total Purchases
Cost of Beginning Inventory = $22/unit * 1,750 units = $38,500
Total Purchases:
June 5 purchase: $25/unit * 1,200 units = $30,000
June 20 purchase: $26/unit * 800 units = $20,800
June 30 purchase: $28/unit * 300 units = $8,400
Total Purchases = $30,000 + $20,800 + $8,400 = $59,200
Cost of Goods Available for Sale = $38,500 + $59,200 = $97,700
b. To calculate the Cost of Goods Sold for June using the FIFO method, we assume that the first units purchased are the first ones sold. Since 2,100 units were sold, we start by using the units from the earliest purchase date and continue until we reach the required quantity.
Cost of Goods Sold (FIFO) = ($25/unit * 1,200 units) + ($26/unit * 800 units) + ($28/unit * 100 units)
Cost of Goods Sold (FIFO) = $30,000 + $20,800 + $2,800 = $53,600
c. To calculate the Cost of Goods Sold for June using the LIFO method, we assume that the last units purchased are the first ones sold. Again, we start with the units from the latest purchase date and continue until we reach the required quantity.
Cost of Goods Sold (LIFO) = ($28/unit * 300 units) + ($26/unit * 800 units) + ($25/unit * 1,000 units)
Cost of Goods Sold (LIFO) = $8,400 + $20,800 + $25,000 = $54,200
Therefore, the Cost of Goods Sold for June using the FIFO method is $53,600, and the Cost of Goods Sold using the LIFO method is $54,200.
For more such questions on FIFO visit:
https://brainly.com/question/17311988
#SPJ11
Lerato plans to buy a car in five and a half years' time. He wants to spend R160 000 on the vehicle. At the moment he has two saving accounts. In the first account he has R30 000. He has nothing in the second account but plans to make quarterly deposits into this account. At the end of the five and a half year period, the sum of the future values of the two accounts has to be R160 000. His first savings account earns interest at a rate of 11% per year compounded half-yearly. What amount does Lerato need to have saved in his second account in five and a half years' time? (Hint: First calculate the future value of the R30 000 in the first account after five and half years' time.) Select one: a. R105 937,23 b. R54 062,77 c. R130 000,00 d. R106 740,43
Lerato need to have saved in his second account in five and a half years' time will be R54 062.77 .option b.
Lerato plans to buy a car in 5 1/2 years, for which he wants to spend R160 000. At present, Lerato has two saving accounts. The first account has a balance of R30 000, and the second account is empty. Lerato plans to make quarterly deposits into the second account.
After five and half years, the sum of future values of both accounts should be R160 000.The first savings account earns interest at a rate of 11% per annum compounded half-yearly. We need to find the amount of money Lerato needs to have saved in his second account in five and half years.
In order to solve this problem, we need to calculate the future value of the R30 000 that Lerato has in his first account after five and half years. This future value can be calculated using the formula:
FV = PV × (1 + r/n)^(n × t)where FV is the future value, PV is the present value, r is the interest rate per period, n is the number of compounding periods per year, and t is the number of years.
For the first savings account:FV = R30 000 × (1 + 0.11/2)^(2 × 5.5) = R30 000 × (1.055)^11 = R63 327.48Thus, after five and half years, the first account will have a future value of R63 327.48.
Now we can find out how much money Lerato needs to save in his second account.Let x be the amount of money that Lerato needs to save in his second account.
The quarterly deposits can be calculated using the following formula:A = P × (1 + r/n)^(n × t)where A is the future value, P is the periodic payment, r is the interest rate per period, n is the number of compounding periods per year, and t is the number of years.
For the second savings account:160 000 - 63 327.48 = R96 672.52The sum of the future values of both accounts should be R160 000.
Therefore, the second savings account should have a future value of R96 672.52 in five and half years. We can use the above formula to find out the quarterly deposits that Lerato needs to make.x = P × (1 + 0.11/4)^(4 × 5.5)P = x / ((1 + 0.11/4)^(4 × 5.5))P = R3333.28
Thus, Lerato needs to make quarterly deposits of R3 333.28 into his second savings account. Hence, the correct answer is R54 062.77 .option b
For more question on account visit:
https://brainly.com/question/28326305
#SPJ8
Question 20 Use the below table which lists prices of various Microsoft options. Use the data in the figure to calculate the payoff and the profits for investments in each of the following January 18
The payoff and the profits for investments in each of the following January 18:
Since there is no figure or table provided in the question, I'm unable to give a specific answer. Please attach the required figure or table so that I can provide you with an accurate solution to your problem. In order to calculate the payoff and the profits for investments, you need to follow the given steps: Identify the strike price of the option. This is the price at which the option holder has the right to buy or sell the underlying asset. Determine whether the option is a call or put option. A call option gives the holder the right to buy the underlying asset, while a put option gives the holder the right to sell the underlying asset. Determine the price of the underlying asset at expiration. This is the price of the asset on the expiration date of the option. Subtract the strike price of the option from the price of the underlying asset to determine the payoff for a call option. For a put option, subtract the price of the underlying asset from the strike price of the option. If the payoff is positive, the option is in the money, and the investor can exercise the option to realize the payoff. If the payoff is negative, the option is out of the money, and the investor will not exercise the option. If the payoff is zero, the option is at the money, and the investor will decide whether to exercise the option based on other factors such as transaction costs. To calculate profits, subtract the price paid for the option from the payoff. If the result is positive, the investor has made a profit. If the result is negative, the investor has incurred a loss.
Learn more about Profits, here: https://brainly.com/question/29987711
#SPJ11
When protection is
encouraged to protect a growing domestic industry; which of the
following is being used?
a.
anti-dumping
argument
b.
infant-industry
argument
c.
save domestic jobs
ar
When protection is encouraged to protect a growing domestic industry, the infant-industry argument is used. The "infant industry argument refers to a concept in economics that seeks to protect and grow the local businesses of a country or a region.
The concept supports the idea that in order for a domestic industry to grow and compete in the global market, it must be protected from competition for a certain period of time. This period will help the industry to establish its position, develop its products, and improve its technology. According to this argument, governments can support their infant industries by imposing tariffs and other trade barriers that will restrict imports and encourage domestic production.
Once the domestic industry has developed, it can compete in the global market and achieve economies of scale. The infant-industry argument is often used in developing countries to support their local industries. However, it is also criticized by some economists who argue that it can lead to inefficiency, higher prices for consumers, and protection of uncompetitive industries.
To know more about global market refer to:
https://brainly.com/question/12424281
#SPJ11