Find the area of the kite with measurements of 6cm 1cm 11cm

Answer:

60 because I added all of them

B and B simple math and simplification of the problems : (2x-5y)(2x-5y) and (x+7)(x+7)

Based on the above, the weight of the other ingredients in the cake is about 850 grams.

To determine the weight of the other ingredients in the cake, one need to subtract the weight of the flour as well as the eggs from the total weight of the cake.

Note that from the question:

So: Weight of flour and eggs = (Weight of flour) + (Number of eggs × Weight of each egg)

= 750 g + (4 × 100 g)

= 750 g + 400 g

= 1150 g

Hence: The Total weight of the cake = 2 kg = 2000 g

Going further:

Weight of other ingredients = Total weight of the cake - Weight of flour and eggs

= 2000 g - 1150 g

= 850 g

Therefore, the weight of the other ingredients that is seen in the cake is 850 grams.

Learn more about weight  from

https://brainly.com/question/29892643

#SPJ1

See text below

To make a 2 kg cake, ¾ kg of flour and 4 eggs (weighing 100 g each) are needed, in addition to other ingredients. What is the weight of the other ingredients in the cake?

To find the population variance of the ages of patients in the isolation ward, we need to calculate the average of the squared deviations from the mean.

To find the population variance, we follow these steps:

Find the mean (average) of the ages:

Mean = (38 + 26 + 13 + 41 + 22) / 5 = 28

Calculate the deviation of each age from the mean:

Deviation1 = 38 - 28 = 10

Deviation2 = 26 - 28 = -2

Deviation3 = 13 - 28 = -15

Deviation4 = 41 - 28 = 13

Deviation5 = 22 - 28 = -6

Square each deviation:

Deviation[tex]1^2[/tex] = [tex]10^2[/tex] = 100

Deviation[tex]2^2[/tex] = [tex](-2)^2[/tex] = 4

Deviation[tex]3^2[/tex] = [tex](-15)^2[/tex] = 225

Deviation[tex]4^2[/tex] = [tex]13^2[/tex] = 169

Deviation[tex]5^2[/tex] = [tex](-6)^2[/tex] = 36

Find the average of the squared deviations:

Variance = (100 + 4 + 225 + 169 + 36) / 5 = 106 / 5 = 21.2

Therefore, the population variance of the ages of patients in the isolation ward is 21.2.

Learn more about mean here:

https://brainly.com/question/30112112

#SPJ11

Answer:

fraction 1 over 2 the difference of 734 and 246.

If you know the formula for the surface area of a right rectangular prism, you can use that knowledge as a basis to derive the formula for the surface area of a cylinder.

Recall the formula for the surface area of a right rectangular prism:

SA_prism = 2lw + 2lh + 2wh

where l, w, and h represent the length, width, and height of the prism, respectively.

Consider a cylinder as a special case of a prism with a circular base and a height. The circular base can be thought of as a rectangle with a length equal to the circumference of the base (2πr) and a width equal to the height (h) of the cylinder.

The curved surface of the cylinder can be "unrolled" and flattened to form a rectangle, with the length equal to the circumference of the base (2πr) and the width equal to the height (h) of the cylinder.

Thus, the surface area of the curved part of the cylinder is equal to the surface area of the rectangular prism with dimensions 2πr and h.

Thus, the formula for the surface area of the cylinder can be derived as follows: SA_cylinder = 2πrh.

More on the surface area of a cylinder can be found here: https://brainly.com/question/29015630

#SPJ4

a) the function that models the level M of morphine (in mg) in the blood t hours after one dose is M = [tex]3 * (0.69)^t[/tex]

b) 0.50 mg of morphine remains in the blood after 5 hours.

c) it will take approximately 14.67 hours for the amount of morphine left to drop to 0.1 mg.

(a) To construct a function that models the level M of morphine (in mg) in the blood t hours after one dose, we can use the formula for exponential decay:

M = [tex]initial amount * (1 - decay rate)^t[/tex]

Given that the patient is initially given 3 mg of morphine and 31% (0.31) of any morphine is washed out every hour, we can write the function as:

M = [tex]3 * (1 - 0.31)^t[/tex]

Simplifying further, we have:

M = [tex]3 * (0.69)^t[/tex]

Therefore, the function that models the level M of morphine (in mg) in the blood t hours after one dose is M = [tex]3 * (0.69)^t[/tex]

(b) To find out how much morphine remains in the blood after 5 hours, we can substitute t = 5 into the function and calculate the value of M:

M = 3 * (0.69)⁵

M ≈ 3 * 0.1681

M ≈ 0.5043

So, approximately 0.50 mg of morphine remains in the blood after 5 hours.

(c) To estimate how long it will take for the amount of morphine left to drop to 0.1 mg, we need to find the value of t when M = 0.1 in the function:

0.1 = [tex]3 * (0.69)^t[/tex]

Dividing both sides by 3:

0.0333 ≈ [tex](0.69)^t[/tex]

Taking the logarithm of both sides:

log(0.0333) ≈ [tex]log[(0.69)^t][/tex]

Using the logarithm properties, we can bring down the exponent:

log(0.0333) ≈ t * log(0.69)

Now, we can solve for t by dividing both sides by log(0.69):

t ≈ log(0.0333) / log(0.69)

Calculating this expression:

t ≈ -2.3859 / -0.1625

t ≈ 14.67

So, it will take approximately 14.67 hours for the amount of morphine left to drop to 0.1 mg.

Learn more about Decay here

https://brainly.com/question/31398300

#SPJ4

Answer:

[tex]\frac{34}{39}[/tex]

Step-by-step explanation:

[tex]2\frac{5}{6}[/tex] can be rewritten as [tex]\frac{17}{6}[/tex]

[tex]3\frac{1}{4}[/tex] can be rewritten as [tex]\frac{13}{4}[/tex]

So now

[tex]\frac{17}{6} / \frac{13}{4}[/tex]

Flip the second fraction and multiply

[tex]\frac{17}{6} * \frac{4}{13} = \frac{68}{78}[/tex]

Now reduce the fraction

[tex]\frac{34}{39}[/tex]

Answer:

54

Step-by-step explanation:

The given statement "A stationary time series is one whose properties depend on the time the series is observed and are likely to exhibit trends and seasonality" is false.

The confidence interval provides a range of values in which the actual value of a population parameter is likely to fall.

A random poll of 800 middle school students found that 9% are ESL (English as a Second Language) learners.

The confidence interval estimates the actual percentage of ESL learners by constructing a 95% confidence interval.

Let us calculate the 95% confidence interval to check the board member's claim.

The point estimate is:9%

The margin of error is calculated as:

ME=1.96×√(pˆ(1−pˆ)/n)=1.96×√(0.09(1−0.09)/800)=0.0228

Since the margin of error is small enough relative to the point estimate, we can approximate the confidence interval using:

pˆ±ME=0.09±0.0228

=(0.0672,0.1128)

The 95% confidence interval is (0.0672, 0.1128).

Now we can check if the board member's claim of 15% is plausible or not:

15% falls outside the 95% confidence interval of (0.0672, 0.1128).

Hence, we can conclude that the board member's claim of 15% is not plausible since his claim is outside of the confidence interval.

False is the correct answer to the given question.

A stationary time series is one whose properties do not depend on the time the series is observed and do not exhibit trends and seasonality.

To learn more about margin

https://brainly.com/question/31622321

#SPJ11

Answer:

your answer is D. 8

Step-by-step explanation:

The answer is:Option (F) Box (iii) is the best and Box (i) is worst, for the given one hundred draws will be made at random with replacement from one of the following boxes based on expected-probability.

Given the three boxes:

(i) 1 9(ii) 4 6(iii) 5 5

One hundred draws will be made at random with replacement from one of the above boxes.

Let us now calculate the expected value of the sum for each of the boxes:

(i) Expected value of sum = (1+9)/2 × 100

                                          = 500.

(ii) Expected value of sum = (4+6)/2 × 100

                                           = 500.

(iii) Expected value of sum = (5+5)/2 × 100

                                            = 500.

Box (i) and (ii) have the same expected value, so we can choose either of them.

However, it is important to note that in Box (ii) the numbers are closer together than in Box (i),

so the sum is more likely to be near the expected value.

This makes Box (ii) the best option.

Box (iii) is the worst option as it has a smaller range than the other two boxes,

Which means that it is less likely to produce a sum close to the expected value.

To know more about expected--probability, visit:

https://brainly.com/question/32070503

#SPJ11

Being amenable to scientific study means that a research topic can be investigated using scientific methods and principles.

When a research topic is described as being amenable to scientific study, it means that it can be effectively examined and analyzed using scientific methods and principles. This implies that the research question or phenomenon can be studied through systematic observation, data collection, experimentation, and analysis within the framework of scientific inquiry.

To be amenable to scientific study, a research topic should be measurable, testable, and capable of producing empirical evidence. It should lend itself to rigorous investigation, allowing for the formulation of hypotheses, the collection of data, and the application of statistical analysis or other scientific methodologies.

Furthermore, the topic should be well-defined and specific enough to be studied systematically, allowing for replication and peer review, which are essential aspects of scientific research.

Overall, being amenable to scientific study means that the research topic can be examined and understood using the established principles and methods of scientific inquiry.

Learn more about Hypothesis here: brainly.com/question/32562440

#SPJ11

Answer:

[tex]Part=\frac{1}{10}[/tex]

[tex]Part=0.10[/tex]

Step-by-step explanation:

Given

[tex]Columns = 10[/tex]

[tex]Shaded = 1[/tex]

Required

Part of the whole

This is calculated as:

[tex]Part=\frac{Shaded}{Columns}[/tex]

Substitute [tex]Columns = 10[/tex] and [tex]Shaded = 1[/tex]

[tex]Part=\frac{1}{10}[/tex]

[tex]Part=0.10[/tex]

Using c we can compute the three complex cubic roots of 2-2i. The roots are (-1 + i), (1 - i), and (-2). The explanation below provides the step-by-step process of finding these roots.

De Moivre's Formula states that for any complex number z = r(cos θ + i sin θ), the nth root of z can be calculated as z^(1/n) = r^(1/n)(cos(θ/n + 2πk/n) + i sin(θ/n + 2πk/n)), where k is an integer.

In this case, we have z = 2-2i, which can be represented in polar form as r = √(2^2 + (-2)^2) = 2√2 and θ = tan^(-1)(-2/2) = -π/4.

To find the cubic roots, we need to compute z^(1/3) = (2√2)^(1/3)[cos((-π/4)/3 + 2πk/3) + i sin((-π/4)/3 + 2πk/3)].

For k = 0:

z^(1/3) = (2√2)^(1/3)[cos((-π/4)/3) + i sin((-π/4)/3)] = (∛2)[cos(-π/12) + i sin(-π/12)] = (-1 + i).

For k = 1:

z^(1/3) = (2√2)^(1/3)[cos((-π/4)/3 + 2π/3) + i sin((-π/4)/3 + 2π/3)] = (∛2)[cos(7π/12) + i sin(7π/12)] = (1 - i).

For k = 2:

z^(1/3) = (2√2)^(1/3)[cos((-π/4)/3 + 4π/3) + i sin((-π/4)/3 + 4π/3)] = (∛2)[cos(-5π/12) + i sin(-5π/12)] = (-2).

Therefore, the three complex cubic roots of 2-2i are (-1 + i), (1 - i), and (-2)

Learn more about De Moivre's here:

https://brainly.com/question/29750103

#SPJ11

Answer:

3 and 4

Step-by-step explanation:

The correct answer is option is 3) 4, 12, 20, 28, 36, 44 and option is 1) -8,-40, -200,-1000,-5000, -25,000.

Question 1= The given sequence is a1 = -4 and an = an-1 + 8.

Here, to find the first six terms of the given sequence, we need to substitute the values of n from 1 to 6.

So, the first six terms of the given sequence are as follows:

The first term, a1 = -4.

Second term, a2 = a1 + 8 = -4 + 8 = 4.

Third term, a3 = a2 + 8 = 4 + 8 = 12.

Fourth term, a4 = a3 + 8 = 12 + 8 = 20.

Fifth term, a5 = a4 + 8 = 20 + 8 = 28.

Sixth term, a6 = a5 + 8 = 28 + 8 = 36.

So, the first six terms of the given sequence are  -4, 4, 12, 20, 28 and 36.

Hence, the correct option is 3) 4, 12, 20, 28, 36, 44.

Question 2= The given sequence is a1 = -8 and an = 5an-1.

Here, to find the first six terms of the given sequence, we need to substitute the values of n from 1 to 6.

So, the first six terms of the given sequence are as follows:

First term, a1 = -8.

Second term, a2 = 5a1 = 5(-8) = -40.

Third term, a3 = 5a2 = 5(-40) = -200.

Fourth term, a4 = 5a3 = 5(-200) = -1000.

Fifth term, a5 = 5a4 = 5(-1000) = -5000.

Sixth term, a6 = 5a5 = 5(-5000) = -25,000.

So, the first six terms of the given sequence are  -8, -40, -200, -1000, -5000 and -25,000.

Hence, the correct option is 1) -8,-40, -200,-1000,-5000, -25,000.

know more about  first six terms

https://brainly.com/question/30420953

#SPJ11

The maclaurin series for the given function xe⁵ˣ = x + 5x² + (25x³)/2! + (125x⁴)/3! + ...

To find the Maclaurin series for the function f(x) = xe⁵ˣ, we can utilize the Maclaurin series expansion of the exponential function, eˣ:

eˣ = 1 + x + (x²)/2! + (x³)/3! + ...

Substituting 5x for x in the above expansion, we have:

e⁵ˣ = 1 + 5x + (5x)²/2! + (5x)³/3! + ...

Multiplying the above series by x, we get:

xe⁵ˣ = x + 5x² + (25x³)/2! + (125x⁴)/3! + ...

This is the Maclaurin series for the function f(x) = xe⁵ˣ.

The calculation involves applying the Maclaurin series expansion of the exponential function to the function f(x) = xe⁵ˣ by substituting 5x for x in the series expansion. Then, multiplying the resulting series by x gives us the desired Maclaurin series for f(x).

The series can be continued by following the pattern of increasing powers of x, with the coefficients determined by the corresponding terms in the expansion.

To learn more about maclaurin series click on,

https://brainly.com/question/31675701

#SPJ4

Answer: 2.43m^3

Step-by-step explanation:

Robots have captured the human imagination for centuries and have become indispensable in many fields, including space exploration and medicine. They have evolved from simple mechanical devices to advanced machines that assist in complex tasks.

Robots have been a source of fascination for humans for centuries. From Leonardo da Vinci’s mechanical suit of armor in 1497 to Westinghouse’s seven-foot robot in 1937, robots have come a long way. Today, robots are used in many fields, including space exploration and medicine. They allow surgeons to operate on patients from thousands of miles away and navigate hospital corridors to deliver pharmaceuticals, X-rays, and bandages. Astronauts use robots to perform maintenance on the International Space Station and NASA sends robotic spacecraft to explore distant planets.

To know more about robots here: brainly.com/question/29379022

#SPJ11

Answer:

3.5

Step-by-step explanation:

Answer:

LxWxH

Step-by-step explanation:

thats how you find area

Answer:

The customer can conclude that the company's claim is correct

Step-by-step explanation:

The percentage of lids that has a free yogurt coupon = 20%

The number of cups a loyal customer purchases = 85 yogurt cups

The number of cups that contained a coupon = 12 (14.1%)

The confidence interval performed = 99% confidence interval for the proportion of yogurt cups containing coupon codes

The interval obtained = (0.044, 0.238)

Therefore, the range of proportion within which the true proportion exists is 0.044 < [tex]\hat p[/tex] < 0.238

The range of percentage within which the true percentage exist is therefore;

0.044 × 100 = 4.4%  < [tex]\hat p[/tex] × 100 < 0.238 × 100 = 23.8%

Given that the possible true percentage of lids that has a coupon is between 4.4% and 23.8% at 99% confidence level, the customer can conclude that only 12 of his yogurt cup contained coupon by chance and that the company's claim is correct.

Answer:

A, the company’s claim may be justified because 0.2 is in the confidence interval.

Step-by-step explanation:

Answer: C

Step-by-step explanation: #1 because if you add 24 and 7 it looks like the other side.

Answer:

A. 25

Step-by-step explanation:

By Pythagoras theorem,

[tex] {25}^{2} = {24}^{2} + {7 }^{2} \\ 625 = 576 + 49 \\ 62 5= 625 \\ therefore \: 25 \: is \: the \: correct \: \: answer.[/tex]

Answer:

I believe the answer is 10

Step-by-step explanation:

Answer:

I think that it might be ten

Step-by-step explanation:

Answer:

a

Step-by-step explanation:

Answer: J

Step-by-step explanation:

Answer:

See explanation below

Step-by-step explanation:

Total number = (Rate)(time)

---------------------------------------

t = cd

t = qh

t = wm