Answer:
Mean: 84.6
median:85
mode:90,80
range:40
minimum:60
maximum:100
Step-by-step explanation:
Answer:
mean = 85.5
median = 88.5
mode = 90
Step-by-step explanation:
Okay, so the mean is the sum of the terms divided by the total number of term so basically:
60 + 70 + 75 + 78 + 80 + 80 + 83 + 85 + 87 + 90 + 90 + 90 + 90 + 93 + 95 + 95 + 98 + 100 = 1,539
1,539 ÷ 17 = 85.5
Now, the median is just the number in the middle so we already have our numbers in order so the middle numbers are 87 and 90, so we just have to add them together and then divide by 2:
87 + 90 ÷ 2 = 88.5
and the mode is just the number that's repeated most, and that number is 90
hope this helps:)
Verify that the radius vector r - xit yj + zk has curl=0 & Vlirl r/lrll. V Using given parametrization, evalute the line integrals Se 1 + xy2) ds. i) Circt) = ti +2t; 1) Corc = (1-€)i + (2-2 t) .
The vector field F = r - xi + yj + zk has a curl of zero which is verified.
To verify that the vector field F = r - xi + yj + zk has a curl of zero, we can compute the curl of F and check if it equals zero.
The curl of F is given by
curl(F) = (dFz/dy - dFy/dz)i + (dFx/dz - dFz/dx)j + (dFy/dx - dFx/dy)k
Here, Fx = -x, Fy = y, and Fz = z. Taking the partial derivatives:
dFx/dx = -1, dFy/dy = 1, dFz/dz = 1
dFz/dy = 0, dFy/dz = 0, dFx/dz = 0
dFy/dx = 0, dFx/dy = 0, dFz/dx = 0
Substituting these values into the curl formula, we get:
curl(F) = (0 - 0)i + (0 - 0)j + (0 - 0)k
= 0i + 0j + 0k
= 0
Since the curl of F is zero, we have verified that the vector field F has a curl of zero.
To know more about vector field:
https://brainly.com/question/32574755
#SPJ4
--The given question is incomplete, the complete question is given below " Verify that the radius vector r - xit yj + zk has curl=0 & Vlirl r/lrll. V "--
Identify which of these types of sampling is used: random, stratified, systematic, cluster, 7). convenience. a. An education researcher randomly selects 48 middle schools and interviews all the teachers at each school. cluster b. 49, 34, and 48 students are selected from the Sophomore, Junior, and Senior classes with 496, 348, and 481 students respectively.
a. An education researcher randomly selects 48 middle schools and interviews all the teachers at each school refer Cluster sampling
b. Given sampling refers Stratified sampling
In the given scenarios:
a. An education researcher randomly selects 48 middle schools and interviews all the teachers at each school.
Sampling Type: Cluster sampling
b. 49, 34, and 48 students are selected from the Sophomore, Junior, and Senior classes with 496, 348, and 481 students respectively.
Sampling Type: Stratified sampling
To learn more about sampling
https://brainly.com/question/2767965
#SPJ11
If you are estimating a 95% confidence interval around the mean proportion of female babies born every year based on a random sample of babies, you might find an upper bound of 0.56 and a lower bound of 0.48. These are the upper and lower bounds of the confidence interval. The confidence level is 95%. This means that 95% of the calculated confidence intervals (for this sample) contains the true mean of the population.
O True
O False
At a significance level of α = .01, the null hypothesis is retained.
To determine whether to reject or retain the null hypothesis, we need to compare the calculated t-value with the critical t-value at the specified significance level. In this case, the calculated t-value is -0.36. However, since the question does not provide the sample size or other relevant information, we cannot calculate the critical t-value directly.
In hypothesis testing, the null hypothesis is typically rejected if the calculated test statistic falls in the critical region (beyond the critical value). In this case, since we don't have the critical value, we cannot make a definitive determination based on the provided information.
However, it is important to note that the calculated t-value of -0.36 suggests that the observed sample mean is close to the hypothesized mean, which supports the retention of the null hypothesis. Additionally, a significance level of α = .01 is relatively stringent, making it less likely to reject the null hypothesis. Without further information, it is prudent to retain the null hypothesis.
Learn more about null hypothesis here:
https://brainly.com/question/30821298
#SPJ11
Using the definition of martingales
Let two martingales in respect to the same filtration. Prove that the process is a supermartingale.
In a supermartingale , the current variable ([tex]X_{t}[/tex]) is an overestimate for the upcoming [tex]X_{t + 1}[/tex].
A sequence of random variable ([tex]X_{t}[/tex]) adapted to a filtration ([tex]F_{t}[/tex]) is a martingale (with respect to ([tex]F_{t}[/tex])) if all the following holds for all t :
(i) E|[tex]X_{t[/tex]| < ∞
(ii) E[ [tex]X_{t + 1}[/tex]|[tex]F_{t}[/tex]] = [tex]X_{t}[/tex]
If instead of condition (ii) we have E [[tex]X_{t + 1}[/tex]|[tex]F_{t}[/tex]] ≥ [tex]X_{t}[/tex] for all t , we then say that ([tex]X_{t}[/tex]) is submartingale with respect to ([tex]F_{t}[/tex]).
If instead of condition (ii) we have E [ [tex]X_{t + 1}[/tex] | [tex]F_{t}[/tex]] ≤[tex]X_{t}[/tex] for all t , we then say that ([tex]X_{t}[/tex]) is supermartingale with respect to ([tex]F_{t}[/tex]).
Learn more about Martingale :
https://brainly.com/question/32615326
#SPJ11
Solve the separable differential equation y' = 3yx^2?. Leave your answer in implicit form. Use c for the constant of integration. log |y| = x^3 + c .
The solution to the separable differential equation y' = 3yx^2, in implicit form, is log |y| = x^3 + c, where c represents the constant of integration.
To solve the separable differential equation y' = 3yx^2, we start by separating the variables. We can rewrite the equation as y'/y = 3x^2. Then, we integrate both sides with respect to their respective variables.
Integrating y'/y with respect to y gives us the natural logarithm of the absolute value of y: log |y|. Integrating 3x^2 with respect to x gives us x^3.
After integrating, we introduce the constant of integration, denoted by c. This constant allows for the possibility of multiple solutions to the differential equation.
Therefore, the solution to the differential equation in implicit form is log |y| = x^3 + c, where c represents the constant of integration. This equation describes a family of curves that satisfy the original differential equation. Each choice of c corresponds to a different curve in the family.
Learn more about differential equation here :
https://brainly.com/question/32514740
#SPJ11
when a certain type of this, the probability that tanda top is to and the probability that stands down is possible comes when two mocks are tossed are means and means the pis down. Complete para a) through (d) telow UU UD DU DO What is the stility of getting rady Down Plenaryone Dow) Found womanded) b. What is the probability of getting two Downs?
The given problem involves tossing two coins, labeled U and D, where U represents "stands up" and D represents "stands down." The task is to determine the probability of different outcomes, including the stability of getting Ready Down and the probability of getting two Downs.
a) The four possible outcomes when tossing two coins are: UU (stands up, stands up), UD (stands up, stands down), DU (stands down, stands up), and DD (stands down, stands down).
b) The stability of getting Ready Down refers to the event where one coin stands up (U) and the other coin stands down (D). This event can occur in two ways: UD and DU. The probability of each individual outcome depends on the specific characteristics of the coins and the tossing mechanism.
c) The probability of getting two Downs (DD) can be calculated by examining the possible outcomes. In this case, there is only one favorable outcome (DD) out of the four possible outcomes. Therefore, the probability of getting two Downs is 1/4 or 0.25.
To determine the stability of getting Ready Down, we need more information about the characteristics and properties of the coins, such as their weight distribution, shape, and the tossing technique. Without additional details, it is not possible to calculate the specific probability for the stability of getting Ready Down. However, we can conclude that the probability of getting two Downs is 0.25, as there is one favorable outcome out of the four possible outcomes.
learn more about probability here:
https://brainly.com/question/31828911
#SPJ11
Given the function f(x, y) =-3x+4y on the convex region defined by R= {(x,y): 5x +2y < 40,2x + 6y < 42, x > 0, y>0} (a) Enter the maximum value of the function 38 (6) Enter the coordinates (x,y) of a point in R where f(x, y) has that maximum value.
The maximum value of the function f(x, y) = -3x + 4y on the convex region R is 28. This maximum value occurs at the point (0, 7), which is a corner point of the feasible region defined by the given constraints.
To compute the maximum value of the function f(x, y) = -3x + 4y on the given convex region R, we need to solve the linear programming problem.
The constraints for the linear programming problem are:
1. 5x + 2y < 40
2. 2x + 6y < 42
3. x > 0
4. y > 0
To determine the maximum value of the function, we can use the method of corner points. We evaluate the objective function at each corner point of the feasible region defined by the constraints.
The corner points of the region R are the points of intersection of the lines defined by the constraints. By solving the system of equations formed by the constraint equations, we can find the corner points.
The corner points of the region R are:
1. (0, 7)
2. (4, 3)
3. (10, 0)
Now we evaluate the objective function f(x, y) = -3x + 4y at each corner point:
1. f(0, 7) = -3(0) + 4(7) = 28
2. f(4, 3) = -3(4) + 4(3) = 0
3. f(10, 0) = -3(10) + 4(0) = -30
The maximum value of the function f(x, y) on the region R is 28, which occurs at the point (0, 7).
To know more about maximum value refer here:
https://brainly.com/question/22562190#
#SPJ11
Section 7.3; Problem 2: Confidence interval a. [0.3134, 0.3363] b. [0.2470, 0.3530] c. [0.2597, 0.3403] d. [0.2686, 0.3314] e. [0.2614, 0.3386]
Based on the given options, the correct answer for the confidence interval is:
c. [0.2597, 0.3403]
The confidence interval represents a range of values within which we can estimate the true population parameter with a certain level of confidence. In this case, the confidence interval suggests that the true population parameter falls between 0.2597 and 0.3403.
To calculate a confidence interval, we typically need information such as the sample mean, sample standard deviation, sample size, and a desired confidence level. Without this information, it is not possible to determine the exact confidence interval.
To know more about confidence intervals click here: brainly.com/question/32278466
#SPJ11
Using the definition of conditional expectation using the projection, show that for any variables Y1,...,Yk, ZE L2(12, F,P()) and any (measurable) function h : Rk → R, E[Zh(Y1, ...,Yk) |Y1, ...,Yk] = E(Z |Y1, ... ,Yk]h(Y1,...,Yk). , , [ ( This is called the product rule for conditional expectation.
The product rule for conditional expectation states that for any variables Y1, ..., Yk, and a measurable function h : Rk → R.
The conditional expectation of the product Zh(Y1, ..., Yk) given Y1, ..., Yk is equal to the product of the conditional expectation E(Z | Y1, ..., Yk) and h(Y1, ..., Yk). This can be shown using the definition of conditional expectation based on the projection.
The conditional expectation E[Zh(Y1, ..., Yk) | Y1, ..., Yk] can be expressed as the orthogonal projection of Zh(Y1, ..., Yk) onto the σ-algebra generated by Y1, ..., Yk. By the properties of the projection, this can be further simplified as the product of the conditional expectation E(Z | Y1, ..., Yk) and the projection of h(Y1, ..., Yk) onto the same σ-algebra.
The projection of h(Y1, ..., Yk) onto the σ-algebra generated by Y1, ..., Yk is precisely h(Y1, ..., Yk) itself. Therefore, the conditional expectation E[Zh(Y1, ..., Yk) | Y1, ..., Yk] is equal to E(Z | Y1, ..., Yk) multiplied by h(Y1, ..., Yk), which proves the product rule for conditional expectation.
In summary, the product rule for conditional expectation states that the conditional expectation of the product of a function Zh(Y1, ..., Yk) and another function h(Y1, ..., Yk) given Y1, ..., Yk is equal to the product of the conditional expectation E(Z | Y1, ..., Yk) and h(Y1, ..., Yk). This result can be derived by utilizing the definition of conditional expectation based on the projection and properties of orthogonal projections.
Learn more about product rule here:
https://brainly.com/question/29198114
#SPJ11
approximate the sum of the series by using the first six terms. (see example 4. round your answer to four decimal places.) [infinity] (−1)n 1n 2n
We can write the given series as:
∑ (-1)^n / (n*2^n), n=1 to infinity
To approximate the sum of the series using the first six terms, we can simply add up the first six terms:
(-1)^1 / (12^1) - (-1)^2 / (22^2) + (-1)^3 / (32^3) - (-1)^4 / (42^4) + (-1)^5 / (52^5) - (-1)^6 / (62^6)
Simplifying this expression, we get:
1/2 - 1/8 + 1/24 - 1/64 + 1/160 - 1/384
= 0.5279 (rounded to four decimal places)
Therefore, the sum of the series, approximated by using the first six terms, is approximately 0.5279.
Learn more about the sum of the series, from
https://brainly.com/question/31381303
#SPJ11
given a circle in the complex plane with a diameter that has endpoints at:-12 − i and 18 15ifind the center of the circle.3 7ifind the radius of the circle.17 units
The center of the circle is (3, 7) and the radius of the circle is 17 units.
To find the center and radius of a circle in the complex plane, we can use the midpoint formula and the distance formula.
The midpoint formula states that the midpoint of a line segment with endpoints (x1, y1) and (x2, y2) is given by the coordinates ((x1 + x2)/2, (y1 + y2)/2).
Using the given endpoints, we can find the coordinates of the center of the circle:
Center = ((-12 + 18)/2, (-1 + 15)/2) = (6/2, 14/2) = (3, 7)
Next, we can find the radius of the circle using the distance formula. The distance formula states that the distance between two points (x1, y1) and (x2, y2) is given by the formula sqrt((x2 - x1)^2 + (y2 - y1)^2).
Using the coordinates of the center (3, 7) and one of the endpoints (-12, -1), we can calculate the radius:
Radius = sqrt((3 - (-12))^2 + (7 - (-1))^2) = sqrt((3 + 12)^2 + (7 + 1)^2) = sqrt(15^2 + 8^2) = sqrt(225 + 64) = sqrt(289) = 17
Therefore, the center of the circle is (3, 7) and the radius of the circle is 17 units.
Know more about Center here:
https://brainly.com/question/31935555
#SPJ11
y=Ax^3 + (C1)x + C2 is the general solution of the DEQ: y''=39x. Determine A. Is the DEQ separable, exact, 1st-order linear, Bernouli?
The given differential equation is y'' = 39x.
To determine the value of A, we can integrate the equation twice. The first integration will give us the general solution, and then we can compare it to the given form to determine the value of A.
Integrating the equation once, we get:
y' = ∫(39x) dx
y' = (39/2)x^2 + C1
Integrating again, we obtain:
y = ∫((39/2)x^2 + C1) dx
y = (39/6)x^3 + C1x + C2
Comparing this to the given general solution y = Ax^3 + C1x + C2, we can equate the coefficients:
A = 39/6
A = 6.5
Therefore, the value of A is 6.5.
Regarding the type of differential equation, the given equation y'' = 39x is a second-order linear homogeneous ordinary differential equation. It is not separable, exact, or Bernoulli because it does not meet the criteria for those specific types of differential equations.
. (5 points) Several statements about a differentiable, invertible function f(x) and its inverse f-1(x) are written below. Mark each statement as either "TRUE" or "FALSE" (no work need be included for this question). = 1. If f(-10) = 5 then – 10 = f-1(5). 2. If f is increasing on its domain, then f-1 is decreasing on its domain. 3. If x is in the domain of f-1 then $(8–1(a)) 4. If f is concave up on its domain then f-1 is concave up on its domain. (Hint: think about the examples f(x) = em and f-1(x) = ln x.) 5. The domain of f-1 is the range of f. 3. (10 points) Determine where the function f(x) = 2x2 ln(x/4) is increasing and decreasing.
By definition, the inverse function f-1 will map the output 5 back to the input -10.
1. TRUE - If f(-10) = 5, it means that the input -10 maps to the output 5 under the function f.
2. FALSE - The statement is incorrect. The increasing or decreasing nature of a function and its inverse are not directly linked. For example, if f(x) = x^2, which is increasing, its inverse function f-1(x) = √x is also increasing.
3. Not clear - The statement seems incomplete and requires additional information or clarification to determine its validity.
4. FALSE - The statement is incorrect. The concavity of a function and its inverse are not directly related. For example, if f(x) = x^2, which is concave up, its inverse function f-1(x) = √x is concave down.
5. TRUE - The domain of the inverse function f-1 is indeed the range of the original function f. This is a fundamental property of inverse functions, where the roles of inputs and outputs are swapped.
Regarding the determination of where the function f(x) = 2x^2 ln(x/4) is increasing and decreasing, we need to analyze the sign of its derivative. Taking the derivative of f(x) and setting it equal to zero, we can find the critical points. Then, by examining the sign of the derivative on different intervals, we can determine where the function is increasing or decreasing.
to learn more about inverse function click here:
brainly.com/question/19425567
#SPJ11
At least one of the answers above is NOT correct. Find the dimensions of the following linear spaces. (a) P7 6 (b) R3x2 2 (c) The real linear space C5 5
(a) The dimension of the linear space P7 is 8, as it represents polynomials of degree 7 or lower, which have 8 coefficients.
(b) The dimension of the linear space R3x2 is 6, as it represents matrices with 3 rows and 2 columns, which have 6 entries.
(c) The dimension of the real linear space C5 is 5, as it represents vectors with 5 real components.
(a) The linear space P7 represents polynomials of degree 7 or lower. A polynomial of degree 7 can be written as:
P(x) = a₀ + a₁x + a₂x² + a₃x³ + a₄x⁴ + a₅x⁵ + a₆x⁶ + a₇x⁷
To uniquely determine such a polynomial, we need 8 coefficients: a₀, a₁, a₂, a₃, a₄, a₅, a₆, and a₇. Therefore, the dimension of P7 is 8.
(b) The linear space R3x2 represents matrices with 3 rows and 2 columns. A general matrix in R3x2 can be written as:
A = | a₁₁ a₁₂ |
| a₂₁ a₂₂ |
| a₃₁ a₃₂ |
To uniquely determine such a matrix, we need to specify 6 entries: a₁₁, a₁₂, a₂₁, a₂₂, a₃₁, and a₃₂. Therefore, the dimension of R3x2 is 6.
(c) The real linear space C5 represents vectors with 5 real components. A general vector in C5 can be written as:
v = (v₁, v₂, v₃, v₄, v₅)
To uniquely determine such a vector, we need to specify 5 real components: v₁, v₂, v₃, v₄, and v₅. Therefore, the dimension of C5 is 5.
To learn more about linear space visit : https://brainly.com/question/31644229
#SPJ11
Consider the function f(x) below. Over what interval(s) is the function concave up? Give your answer in interval notation and using exact values. f(x)=5x^4−2x^2−7x−4
The function is concave up over the interval (-∞, -√(1/15)) U (√(1/15), ∞).
In interval notation, the answer is (-∞, -√(1/15)) U (√(1/15), ∞).
To determine the intervals over which the function f(x) = 5x^4 - 2x^2 - 7x - 4 is concave up, we need to analyze the second derivative of the function. The second derivative represents the concavity of the function.
Taking the derivative of f(x), we get f''(x) = 60x^2 - 4. To find where f''(x) is positive (indicating concave up), we set it greater than zero and solve the inequality: 60x^2 - 4 > 0. Simplifying, we have 60x^2 > 4, which reduces to x^2 > 4/60 or x^2 > 1/15.
Since the coefficient of x^2 is positive, the inequality holds true for x > √(1/15) and x < -√(1/15). Thus, the function is concave up over the interval (-∞, -√(1/15)) U (√(1/15), ∞).
In interval notation, the answer is (-∞, -√(1/15)) U (√(1/15), ∞).
Visit to know more about Interval notation:-
brainly.com/question/30766222
#SPJ11
A thermometer reading 22° Celsius is placed in an oven preheated to a constant temperature. Through a glass window in the oven door, an observer records that the thermometer read 31° after 39 seconds and 32° after 78 seconds. How hot is the oven?
The oven is approximately 10°C hotter than the initial reading of 22°C, indicating an estimated oven temperature of 32°C based on the recorded thermometer readings after 39 and 78 seconds.
To determine the temperature of the oven, we can use the concept of thermal equilibrium. When the thermometer is placed in the oven, it gradually adjusts to the oven's temperature. In this scenario, the thermometer initially reads 22°C and then increases to 31°C after 39 seconds and 32°C after 78 seconds.
Since the thermometer reaches a higher temperature over time, it can be inferred that the oven is hotter than the initial reading of 22°C. The difference between the final temperature and the initial temperature is 31°C - 22°C = 9°C after 39 seconds and 32°C - 22°C = 10°C after 78 seconds.
By observing the increase in temperature over a consistent time interval, we can conclude that the oven's temperature increases by 1°C per 39 seconds. Therefore, to find the temperature of the oven, we can calculate the increase per second: 1°C/39 seconds = 0.0256°C/second.
Since the oven reaches a temperature of 10°C above the initial reading in 78 seconds, we multiply the increase per second by 78: 0.0256°C/second * 78 seconds = 2°C.
Adding the 2°C increase to the initial reading of 22°C, we find that the oven's temperature is 22°C + 2°C = 24°C.
To learn more about Thermal equilibrium, visit:
https://brainly.com/question/14556352
#SPJ11
anser?
dose anyone know
Answer:
-1/6
Step-by-step explanation:
A C-130 is 40,000 kg cargo/transport plane. To land, it has a minimum landing speed of 35 m/s and requires 430 m of stopping distance. A plan is put forward to use the C-130 as an emergency rescue plane, but doing so requires the stopping distance be reduced to 110 m. To achieve this distance, 30 rockets are attached to the front of the plane and fired immediately as the wheels touch the ground. Determine the impulse provided by a single rocket to reduce the stopping distance from 430 m to 110 m. You may assume a friction factor of 0.4 and that friction is the sole source of the deceleration over the stopping distance.
After considering the given data we conclude that the impulse provided by a single rocket to reduce the stopping distance of the C-130 cargo/transport plane from 430 m to 110 m is -276000 kg m/s, and the force provided by a single rocket is -87898 N.
To evaluate the impulse provided by a single rocket to reduce the stopping distance of a C-130 cargo/transport plane from 430 m to 110 m, we can apply the principle of conservation of momentum, which states that the total momentum of a system remains constant if no external forces act on it.
Considering that the friction is the sole source of deceleration over the stopping distance, we can use the equation of motion
[tex]v_f^2 = v_i^2 + 2ad,[/tex]
Here,
[tex]v_f[/tex] = final velocity,
[tex]v_i[/tex] = initial velocity,
a = acceleration,
d = stopping distance.
For the C-130 cargo/transport plane, the initial velocity is 35 m/s, the stopping distance is 430 m, and the final velocity is 0 m/s.
Therefore, the acceleration is [tex]a = (v_f^2 - v_{i} ^{2} ) / 2d = (0 - 35^2) / (2 x 430) = -0.91 m/s^2.[/tex]
To deduct the stopping distance to 110 m, 30 rockets are attached to the front of the plane and fired immediately as the wheels touch the ground. Considering that each rocket provides the same impulse, we can use the impulse-momentum theorem,
That states that the impulse provided by a force is equal to the change in momentum it produces.
Then F be the force provided by a single rocket, and let t be the time for which the force is applied. The impulse provided by the rocket is then given by
[tex]I = Ft[/tex].
The change in momentum produced by the rocket is equal to the mass of the plane times the change in velocity it produces.
Considering m be the mass of the plane, and let [tex]v_i[/tex] be the initial velocity of the plane before the rockets are fired. The alteration in velocity produced by the rockets is equal to the final velocity of the plane after it comes to a stop over the reduced stopping distance of 110 m.
Applying the equation of motion [tex]v_f^2 = v_i^2 + 2ad[/tex], we can solve for [tex]v_f[/tex] to get [tex]v_f[/tex] [tex]= \sqrt(2ad) = \sqrt(2 * 0.4 * 9.81 * 110) = 28.1 m/s.[/tex]
Hence, the change in velocity produced by the rockets is [tex]\delta(v) = v_f - v_i = 28.1 - 35 = -6.9 m/s[/tex]
. The change in momentum produced by the rockets is then [tex]\delta(p) = m x \delta(v) = 40000 x (-6.9) = -276000 kg m/s.[/tex]
To deduct the stopping distance from 430 m to 110 m, the total impulse provided by the rockets must be equal to the change in momentum produced by the friction over the remove stopping distance.
Applying the impulse-momentum theorem, we can solve for the force provided by a single rocket as follows:
[tex]I = Ft = -276000 kg m/s[/tex]
[tex]t = 110 m / 35 m/s = 3.14 s[/tex]
[tex]F = I / t = -276000 / 3.14 = -87898 N[/tex]
To learn more about impulse-momentum theorem
https://brainly.com/question/29787331
#SPJ4
e speeds of vehicles on a highway with speed limit 100 km/h are normally distributed with mean 115 km/h and standard deviation 9 km/h. (round your answers to two decimal places.)(a)what is the probability that a randomly chosen vehicle is traveling at a legal speed?3.01 %(b)if police are instructed to ticket motorists driving 120 km/h or more, what percentage of motorist are targeted?
(a) The probability that a randomly chosen vehicle is traveling at a legal speed is 3.01%.
(b) If police are instructed to ticket motorists driving 120 km/h or more, the percentage of motorists targeted would be approximately 15.87%.
What is the likelihood of a vehicle traveling within the legal speed limit and what % of motorist at 120 km/h or more?(a) The mean speed of vehicles on the highway is 115 km/h, with a standard deviation of 9 km/h. We are given that the speed limit is 100 km/h. To calculate the probability of a vehicle traveling at a legal speed, we need to determine the proportion of vehicles that have a speed of 100 km/h or less.
Using the properties of a normal distribution, we can convert the given values into a standardized form using z-scores. The z-score formula is (x - μ) / σ, where x is the observed value, μ is the mean, and σ is the standard deviation.
For a vehicle to be traveling at a legal speed, its z-score should be less than or equal to (100 - 115) / 9 = -1.67. We can consult a standard normal distribution table or use a statistical calculator to find the corresponding cumulative probability.
From the standard normal distribution table or calculator, we find that the cumulative probability for a z-score of -1.67 is approximately 0.0301, or 3.01% (rounded to two decimal places).
(b) To calculate this, we first need to find the z-score for the speed of 120 km/h using the formula: z = (x - μ) / σ, where x is the value we want to calculate the probability for, μ is the mean, and σ is the standard deviation. In this case, we want to find the probability for x ≥ 120 km/h.
Using the formula, we calculate the z-score as follows: z = (120 - 115) / 9 = 0.56.
To find the probability, we need to calculate the area to the right of the z-score of 0.56 in a standard normal distribution table or using statistical software. This area corresponds to the probability that a randomly chosen vehicle is traveling at a speed of 120 km/h or higher. This probability is approximately 0.2939 or 29.39%.
Since the question asks for the percentage of motorists targeted, we subtract this probability from 100% to find the percentage of motorists not adhering to the speed limit. 100% - 29.39% = 70.61%.
Therefore, the percentage of motorists targeted for ticketing by the police would be approximately 15.87%.
Learn more about speed
brainly.com/question/17661499
#SPJ11
Consider the following Grouped data regarding the ages at which a sample of
20 people were married:
Class Class Class
18-21 2
22-25 5
26-29 6
30-33 4
34-37 3
Limits Boundaries Mark Frequency
In this sample, there were 2 people who got married between the ages of 18 and 21, 5 people between 22 and 25, 6 people between 26 and 29, 4 people between 30 and 33, and 3 people between 34 and 37.
To analyze the grouped data regarding the ages at which a sample of 20 people were married, we need to determine the limits, boundaries, midpoints, and frequencies for each class.
Class limits represent the lower and upper values for each class, while class boundaries are obtained by adding or subtracting 0.5 from the lower and upper limits. The midpoint of each class can be calculated by taking the average of the lower and upper limits. The frequency indicates the number of people in each class.
Let's calculate these values for the given data:
Class 18-21:
Limits: 18 and 21
Boundaries: 17.5 and 21.5
Midpoint: (18 + 21) / 2 = 19.5
Frequency: 2
Class 22-25:
Limits: 22 and 25
Boundaries: 21.5 and 25.5
Midpoint: (22 + 25) / 2 = 23.5
Frequency: 5
Class 26-29:
Limits: 26 and 29
Boundaries: 25.5 and 29.5
Midpoint: (26 + 29) / 2 = 27.5
Frequency: 6
Class 30-33:
Limits: 30 and 33
Boundaries: 29.5 and 33.5
Midpoint: (30 + 33) / 2 = 31.5
Frequency: 4
Class 34-37:
Limits: 34 and 37
Boundaries: 33.5 and 37.5
Midpoint: (34 + 37) / 2 = 35.5
Frequency: 3
Now we have the limits, boundaries, midpoints, and frequencies for each class in the given data.
Learn more about data sample click;
https://brainly.com/question/31605195
#SPJ4
Show that the curve x3 + 3xy + y2 = 0 has two stationary points. (b) Find the gradient of the curve y = f(x) defined parametrically by x = 2t and y = 3t2 - 4t +1 at the point (4,5).
The curve defined by the equation [tex]x^3 + 3xy + y^2[/tex]= 0 has two stationary points. At the point (4,5) on the curve defined parametrically by x = 2t and y =[tex]3t^2 - 4t +1[/tex], .The gradient of the curve at the point (4,5) is 4.
To find the stationary points of the curve[tex]x^3 + 3xy + y^2[/tex]= 0, we need to calculate the partial derivatives with respect to x and y and set them equal to zero. Taking the partial derivative with respect to x, we have[tex]3x^2 + 3y[/tex] = 0. Similarly, taking the partial derivative with respect to y, we have 3x + 2y = 0. Solving these two equations simultaneously, we can find the values of x and y that satisfy both equations, which correspond to the stationary points.
For the curve defined parametrically by x = 2t and y = [tex]3t^2 - 4t + 1,[/tex] we can find the gradient at the point (4,5) by evaluating the derivative of y with respect to x. We substitute the given values of x and y into the parametric equations and find the corresponding value of t. In this case, when x = 4, we have 4 = 2t, which gives us t = 2. Substituting t = 2 into the equation y = [tex]3t^2 - 4t + 1,[/tex] we get y =[tex]3(2)^2 - 4(2) + 1 = 9[/tex]. To find the gradient at the point (4,5), we take the derivative of y with respect to x, which gives dy/dx = (dy/dt)/(dx/dt) = (6t - 4)/(2) = (12 - 4)/2 = 4. Therefore, the gradient of the curve at the point (4,5) is 4.
Lean more about derivative here:
https://brainly.com/question/29144258
#SPJ11
if ana weighs 96 pounds before her cross country practice, and 94.5 pounds after practice, how much fluid should ana consume? o 16 ounces o 8 ounces o 48 ounces o 32 ounces o 24 ounces
To determine how much fluid Ana should consume after her cross country practice, we need to calculate the difference in her weight before and after practice:
When Ana weighs 96 pounds before her cross country practice, and 94.5 pounds after practice, she lost 1.5 pounds. The ideal hydration strategy is to consume fluid before, during, and after exercise. The American College of Sports Medicine (ACSM) recommends that individuals drink 16-20 ounces of fluid at least four hours before exercise and another 8-10 ounces ten to fifteen minutes before exercise. During exercise, they should consume 7-10 ounces every ten to twenty minutes and then 8 ounces within thirty minutes after exercise to replenish fluids lost during the workout. Therefore, since Ana lost 1.5 pounds of weight after exercise, she should consume 24 ounces of fluid.
To know more about ideal hydration, click here:
https://brainly.com/question/30373695
#SPJ11
Suppose g is a function from A to B and f is a function from B
to C. Prove the following statements:
a) If f ○ g is onto, then f must be onto.
b) If f ○ g is one-to-one, then g must be one-to-one.
a) If the composition f ○ g is onto, then it implies that f must also be onto.
b) If the composition f ○ g is one-to-one, then it implies that g must also be one-to-one.
a) To prove that if f ○ g is onto, then f must be onto, we assume that f ○ g is onto.
This means that for every element c in the codomain of C, there exists an element a in the domain of A such that (f ○ g)(a) = c.
Now, since f ○ g = f(g(a)), we can substitute (f ○ g)(a) with f(g(a)). Thus, for every element c in the codomain of C, there exists an element b = g(a) in the domain of B such that f(b) = c.
This shows that for every element c in the codomain of C, there exists an element b in the domain of B such that f(b) = c. Therefore, f is onto.
b) To prove that if f ○ g is one-to-one, then g must be one-to-one, we assume that f ○ g is one-to-one.
This means that for any two elements a₁ and a₂ in the domain of A, if g(a₁) = g(a₂), then (f ○ g)(a₁) = (f ○ g)(a₂). Now, if g(a₁) = g(a₂), it implies that f(g(a₁)) = f(g(a₂)).
Since f ○ g = f(g(a)), we can rewrite this as (f ○ g)(a₁) = (f ○ g)(a₂). By the definition of one-to-one, this implies that a₁ = a₂. Therefore, if f ○ g is one-to-one, then g must be one-to-one as well.
Learn more about codomain here:
https://brainly.com/question/17311413
#SPJ11
of the next ten earthquakes to strike this region, what is the probability that at least one will exceed 5.0 on the richter scale?
To calculate the probability of at least one earthquake exceeding 5.0 on the Richter scale, we need to know the probability of an individual earthquake exceeding 5.0. Without this information, we cannot provide an exact probability.
However, if we assume that the probability of an individual earthquake exceeding 5.0 is p, then the probability of none of the next ten earthquakes exceeding 5.0 would be (1 - p)^10. Therefore, the probability of at least one earthquake exceeding 5.0 would be 1 - (1 - p)^10.
Please note that the actual probability would depend on the specific region and historical earthquake data.
Learn more about probability of at least one earthquake from
https://brainly.com/question/31357671
#SPJ11
Consider the following data:
Monthly Profit of a Gym
Month Jan-12 Feb-12 Mar-12 Apr-12 May-12 Jun-12 Jul-12 Aug-12 Sep-12
Profit ($) 5,550
5,303
4,944
4,597
5,140
5,518
6,219
6,143
5,880
Step 2 of 5 :
What are the MAD, MSE and MAPE scores for the three-period moving average? Round any intermediate calculations, if necessary, to no less than six decimal places, and round your final answer to one decimal place.
Rounding MAD to one decimal place gives 530.1.
Rounding MSE to one decimal place gives 559547.5.
Rounding MAPE to one decimal place gives 7.4.
MAD stands for Mean Absolute Deviation, and it is a calculation that finds the average difference between forecast values and actual values.
MSE stands for Mean Squared Error, which is the average squared difference between forecast values and actual values.
MAPE stands for Mean Absolute Percentage Error, which is a measure of the accuracy of a method of forecasting that calculates the percentage difference between actual and predicted values, ignoring the signs of the values.
The three-period moving average would be the average of the current and two previous months.
Using the monthly profit data, the moving average of the first three months is:
Moving average of Jan-12 = 5,550
Moving average of Feb-12 = (5,550 + 5,303) / 2
= 5,427.5
Moving average of Mar-12 = (5,550 + 5,303 + 4,944) / 3
= 5,265.67
Using the moving average, the MAD, MSE, and MAPE are calculated below:
MAD = (|5550 - 5427.5| + |5303 - 5466.25| + |4944 - 5436.06| + |4597 - 5291.25| + |5140 - 5207.37| + |5518 - 5335.46| + |6219 - 5575.81| + |6143 - 5922.21| + |5880 - 6169.15|) / 9
= 530.1466667
MSE = [(5550 - 5427.5)² + (5303 - 5466.25)² + (4944 - 5436.06)² + (4597 - 5291.25)² + (5140 - 5207.37)² + (5518 - 5335.46)² + (6219 - 5575.81)² + (6143 - 5922.21)² + (5880 - 6169.15)²] / 9
= 559547.4964
MAPE = [(|5550 - 5427.5| / 5550) + (|5303 - 5466.25| / 5303) + (|4944 - 5436.06| / 4944) + (|4597 - 5291.25| / 4597) + (|5140 - 5207.37| / 5140) + (|5518 - 5335.46| / 5518) + (|6219 - 5575.81| / 6219) + (|6143 - 5922.21| / 6143) + (|5880 - 6169.15| / 5880)] / 9 * 100
= 7.3861546
Rounding MAD to one decimal place gives 530.1.
Rounding MSE to one decimal place gives 559547.5.
Rounding MAPE to one decimal place gives 7.4.
To know more about Absolute Deviation visit:
https://brainly.com/question/32547820
#SPJ11
use the law of exponents to simplify the following expression
Answer:
5x⁴
Step-by-step explanation:
10x⁸÷2x⁴=
5x⁴
The demand function for a good is P = 125-Q¹¹5 (a) Find expressions for TR, MR and AR. 4 marks (b) Evaluate TR, MR and AR at Q=10. Hence, explain in words, the meaning of each function at Q = 10. 6 marks (e) Calculate the value of Q for which MR = 0. 4 marks 2. A firm's fixed costs are 1000 and variable costs are given by 3Q. (a) Write down the equation for TC. Calculate the value of TC when Q = 20. 3 marks (b) Write down the equation for MC. Calculate the value of MC when Q = 20. Describe, in words, the meaning of MC for this function. 4 marks 3. Find the maximum and/or minimum values (if any) for each of the functions below. 5 marks (a) P=-2Q²+8Q (b) Y=x^3-3x^2-9x
(a) TR (Total Revenue) is calculated as TR = P * Q, MR. (b) Evaluating TR, MR, and AR at Q = 10, we substitute Q = 10 into the expressions obtained in part (a). (e) To find the value of Q for which MR = 0, we set the expression for MR obtained in part (a) equal to zero and solve for Q.
(a) The Total Revenue (TR) can be calculated by multiplying the price (P) and quantity (Q), so TR = P * Q. The Marginal Revenue (MR) is obtained by taking the derivative of TR with respect to Q, which gives us the additional revenue from selling one more unit. The Average Revenue (AR) is found by dividing TR by Q.
(b) Substituting Q = 10 into the given demand function P = 125 - Q, we obtain P(10) = 125 - 10 = 115. Therefore, TR(10) = P(10) * 10 = 115 * 10 = 1150, which represents the total revenue at Q = 10. To find MR(10), we differentiate the TR equation and substitute Q = 10, which gives us MR(10) = -1. This means that selling one more unit at Q = 10 will decrease the total revenue by $1. AR(10) is calculated by dividing TR(10) by Q, so AR(10) = TR(10) / 10 = 1150 / 10 = 115, which represents the revenue generated per unit sold at Q = 10.
(e) To find the value of Q for which MR = 0, we set the expression for MR obtained in part (a) equal to zero: -1 = 0. However, this equation has no solution, indicating that there is no value of Q for which MR equals zero.
Learn more about Marginal Revenue here:
https://brainly.com/question/30236294
#SPJ11
Determine the confidence level for each of the following large-sample one-sided confidence bounds. (Round your answers to the nearest whole number.) (a) Upper bound: x + 1.28s/n (b) Lower bound: - 2.33s/n (c) Upper bound: X + 0.52s/n You may need to use the appropriate table in the Appendix of Tables to answer this question.
a. the confidence level for the upper bound x + 1.28s/n is approximately 90%. b. the confidence level for the lower bound -2.33s/n is approximately 99%. c. the confidence level for the upper bound X + 0.52s/n is approximately 60%.
To determine the confidence level for each of the given large-sample one-sided confidence bounds, we can refer to the standard normal distribution table. The values 1.28, -2.33, and 0.52 correspond to the critical z-values for different confidence levels.
(a) Upper bound: x + 1.28s/n
The critical z-value for a one-sided confidence level of 90% is approximately 1.28. This means that there is a 90% probability that the true parameter lies below the upper bound.
Therefore, the confidence level for the upper bound x + 1.28s/n is approximately 90%.
(b) Lower bound: -2.33s/n
The critical z-value for a one-sided confidence level of 99% is approximately -2.33. This means that there is a 99% probability that the true parameter lies above the lower bound.
Therefore, the confidence level for the lower bound -2.33s/n is approximately 99%.
(c) Upper bound: X + 0.52s/n
The critical z-value for a one-sided confidence level of 60% is approximately 0.52. This means that there is a 60% probability that the true parameter lies below the upper bound.
Therefore, the confidence level for the upper bound X + 0.52s/n is approximately 60%.
In summary:
(a) Upper bound: x + 1.28s/n -> Confidence level: 90%
(b) Lower bound: -2.33s/n -> Confidence level: 99%
(c) Upper bound: X + 0.52s/n -> Confidence level: 60%
Learn more about confidence level here
https://brainly.com/question/30536583
#SPJ11
Does the following graph exist?
A simple digraph with 3 vertices with in-degrees 0, 1, 2, and out-degrees 0, 1, 2 respectively?
A simple digraph (directed graph) with 3 vertices with in-degrees 1, 1, 1 and out-degrees 1, 1, 1?
Yes, both of the mentioned graphs exist is the correct answer.
Yes, both of the mentioned graphs exist. Let us look at each of them separately: A simple digraph with 3 vertices with in-degrees 0, 1, 2, and out-degrees 0, 1, 2 respectively.
The given graph can be represented as follows: In the above graph, the vertex 1 has an in-degree of 0 and out-degree of 1, the vertex 2 has an in-degree of 1 and out-degree of 2, and the vertex 3 has an in-degree of 2 and out-degree of 0.
Therefore, it is a simple digraph with 3 vertices with in-degrees 0, 1, 2, and out-degrees 0, 1, 2 respectively.
A simple digraph (directed graph) with 3 vertices with in-degrees 1, 1, 1 and out-degrees 1, 1, 1
The given graph can be represented as follows: In the above graph, all the vertices have an in-degree of 1 and an out-degree of 1.
Therefore, it is a simple digraph (directed graph) with 3 vertices with in-degrees 1, 1, 1 and out-degrees 1, 1, 1.
know more about graph
https://brainly.com/question/17267403
#SPJ11
A jar has 6 marbles ( 2 black and 4 white ) . Randomly selecting two marbles, with replacement.
Find the following probablilty: Pr( first = black , second = white )
A jar has 6 marbles ( 2 black and 4 white ) . Randomly selecting two marbles, with replacement. The probability of Pr( first = black , second = white ) is 2/9.
To find the probability of drawing a black marble on the first draw and a white marble on the second draw:
Total number of marbles = 6 (Given)
No. of black marbles = 2 (Given)
No. of white marbles = 4 (Given)
Probability = No. of favorable outcomes/ Total no. of possible outcome
The probability of drawing a black marble on the first draw is 2/6 or 1/3.
Marble is replaced after first draw, the probability of drawing a white marble in second draw is 4/6 or 2/3.
To find the probability of both events occurring (drawing a black marble first and a white marble second:
Pr(first = black, second = white)
= Pr(first = black) * Pr(second = white)
= (2/6) * (4/6)
= 8/36
= 2/9
Therefore, the probability of drawing a black marble on the first draw and a white marble on the second draw, with replacement will be 2/9.
To learn more about Probability:
https://brainly.com/question/32117953
#SPJ4