If an athlete runs the triathlon of 10 km in 2 hours, what is her average speed in kilometers per hour?

Answer:

The mechanical energy of the ball is 112.667 J

Explanation:

Mechanical energy = kinetic energy + potential energy

Where:

kinetic energy = [tex]\frac{1}{2}[/tex]m[tex]v^{2}[/tex]

potential energy = mgh

So that for the given ball, its mechanical energy = [tex]\frac{1}{2}[/tex]m[tex]v^{2}[/tex] + mgh

                                = m([tex]\frac{1}{2}[/tex][tex]v^{2}[/tex] + gh)

But, m = 400 g = 0.4 kg, v = 23.0 m/s, g = 9.81 m/[tex]s^{2}[/tex] and h = 1.75 m.

Mechanical energy of the ball = 0.4([tex]\frac{1}{2}[/tex]([tex]23^{2}[/tex]) + 1.75*9.81)

                                                  = 0.4(264.5 + 17.1675)

                                                  = 0.4 x 281.6675

                                                  = 112.667

The mechanical energy of the ball is 112.667 J.

Answer:

SO₂ + 2H₂ —> S + 2H₂O

The coefficients are: 1, 2, 1, 2

Explanation:

SO₂ + H₂ —> S + H₂O

The above equation can be balance as follow:

SO₂ + H₂ —> S + H₂O

There are 2 atoms of O on the left side and 1 atom on the right side. It can be balance by writing 2 before H₂O as shown below:

SO₂ + H₂ —> S + 2H₂O

There are 2 atoms of H on the left side and 4 atoms the right side. It can be balance by writing 2 before H₂ as shown below:

SO₂ + 2H₂ —> S + 2H₂O

Now, the equation is balanced.

The coefficients are: 1, 2, 1, 2

Answer:

a) The minimum thickness of the oil slick at the spot is 313 nm

b) the minimum thickness be now will be 125 nm

Explanation:  

Given the data in the question;

a) The index of refraction of the oil is 1.20. What is the minimum thickness of the oil slick at that spot?

t[tex]_{min[/tex] = λ/2n

given that; wavelength λ = 750 nm and  index of refraction of the oil n = 1.20

we substitute

t[tex]_{min[/tex] = 750 / 2(1.20)

t[tex]_{min[/tex] = 750 / 2.4

t[tex]_{min[/tex] = 312.5 ≈ 313 nm

Therefore, The minimum thickness of the oil slick at the spot is 313 nm

b)

Suppose the oil had an index of refraction of 1.50. What would the minimum thickness be now?

minimum thickness of the oil slick at the spot will be;

t[tex]_{min[/tex] = λ/4n

given that; wavelength λ = 750 nm and  index of refraction of the oil n = 1.50

we substitute

t[tex]_{min[/tex] = 750 / 4(1.50)

t[tex]_{min[/tex] = 750 / 6

t[tex]_{min[/tex] = 125 nm

Therefore, the minimum thickness be now will be 125 nm

Answer:

synthesis

Explanation:

It is a combination (synthesis) reaction.

A+B→AB

Answer:

  i think it is a synthesis

Explanation:

synthesis reaction occurs when two substances combine and form a compound...

hope this helps!!

Answer:

the total momentum of the system before collision is 6.94 kgm/s

Explanation:

Given;

mass of the first cart, m₁ = 2.0 kg

mass of the second cart, m₂ = 1.8 kg

velocity of the first cart before collision, u₁ = 5.9 m/s

velocity of the second cart before collision, u₂ = -2.7 m/s

The total momentum of the system before collision is calculated as follows;

[tex]P_t = P_1 + P_2 \\\\P_t = m_1u_1 + m_2u_2\\\\P_t = (2\times 5.9) + (1.8 \times -2.7)\\\\P_t = 11.8 - 4.86\\\\P_t = 6.94 \ kgm/s[/tex]

Therefore, the total momentum of the system before collision is 6.94 kgm/s

Answer:

the pressure the balloon exerts on the table is 1,730.77 N/m²

Explanation:

Given;

weight of the water balloon, F = 4.5 N

area of the balloon, A = 2.6 x 10⁻³ m²

The pressure the balloon exerts on the table is calculated as follows;

[tex]P = \frac{F}{A}[/tex]

substitute the given values and solve for pressure, P;

[tex]P = \frac{4.5}{2.6 \times 10^{-3}} \\\\P = 1,730.77 \ N/m^2[/tex]

Therefore, the pressure the balloon exerts on the table is 1,730.77 N/m²

Answer:

1 and 3

Explanation:

because they are going up from 0

The acceleration of the sprinter is approximately 131,426 km/h^2.

To find the acceleration in km/h^2, we need to convert the units from meters per second (m/s) to kilometers per hour (km/h) and adjust the time units accordingly. Here's the step-by-step calculation:

1. Convert the final velocity from m/s to km/h:

  14 m/s * (3.6 km/h) / (1 m/s) = 50.4 km/h

2. Convert the time from seconds (s) to hours (h):

  1.38 s * (1 h) / (3600 s) = 0.0003833 h

3. Calculate the acceleration using the formula:

  Acceleration = (Final velocity - Initial velocity) / Time

Since the initial velocity is 0 m/s (rest), we have:

Acceleration = (50.4 km/h - 0 km/h) / 0.0003833 h

Acceleration = 131425.955 km/h^2

For more such questions on acceleration,click on

https://brainly.com/question/460763

#SPJ8    

Answer:

I guess it is kinetic energy

Answer:

kinetic energy because my dog told me

Answer:

thymine

Explanation:

The nitrogen base found only in DNA is known as thymine which is also called 5-methyl uracil as thymine is a derivative of uracil.

Answer:

I'd say D

Explanation:

because not all weather happens within the atmosphere, and most weather depends on region (lile if your near the equator or not)

Explanation:

c because there is element

Answer:

C. H2 and N2 would react to produce more NH3

Explanation:

A.P.E.X

Answer:

you can write some points its an explanation

and similarities. or common

Explanation:

Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy. A whole branch of physics, thermodynamics, deals with how heat is transferred between different systems and how work is done in the process (see the 1ˢᵗ law of thermodynamics).

The faster the atoms or molecules move, the more heat or thermal energy they have. ... A hair straightener turns the electrical energy from a wall outlet into heat (thermal energy). 4. As electricity runs through the filaments in a space heater, the electrical energy is converted into heat (thermal energy).

2:5

Explanation:

400g : 1kg

400g: 1000g

4 : 10

2 : 5

The normal force exerted by the floor of the elevator on the student during her brief acceleration is 1357.2 N.

To determine the normal force exerted by the floor of the elevator on the student during the brief acceleration, we need to analyze the forces acting on the student.

The force of gravity acting on the student can be calculated using the equation F_gravity = m * g, where m is the mass of the student and g is the acceleration due to gravity (approximately 9.8 m/s²). Therefore, F_gravity = 87.0 kg * 9.8 m/s² = 852.6 N.

Since the elevator and the student are accelerating upward, there is an additional upward force acting on the student. This force is equal to the mass of the student multiplied by the acceleration of the elevator, which is given as 5.80 m/s². So, the upward force is F_upward = m * a = 87.0 kg * 5.80 m/s² = 504.6 N.

Now, the normal force exerted by the floor of the elevator on the student is equal to the sum of the gravitational force and the upward force. In this case, the normal force is given by F_normal = F_gravity + F_upward = 852.6 N + 504.6 N = 1357.2 N.

For such more questions on acceleration

https://brainly.com/question/460763

#SPJ8

Answer:

60

Explanation:

Work Done= Force×Displacement in the direction of the force

W.D. = 10×6

W.D. = 10×0.6

W.D. = 6m

Answer:

a) y = 127.6 m, b) 11.9s,  c)  v = 103.6  m / s, θ’= 326.7º

Explanation:

This is a missile throwing exercise

let's start by breaking down the initial velocity

         sin 30 = [tex]\frac{v_{oy} }{v_o}[/tex]

         cos 30 = v₀ₓ / v₀

         v_{oy} = v₀ go sin 30

         v₀ₓ = v₀ cos 30

         v_{oy} = 100 sin 30 = 50 m / s

         v₀ₓ = 100 cos 30 = 86.6 m / s

a) the maximum height is requested.

At this point the vertical velocity is zero (v_y = 0)

         v_y² = [tex]v_{oy}^2[/tex] - 2 g y

         0 = v_{oy}^2 - 2g y

         y = [tex]\frac{v_{oy}^2 }{2g}[/tex]

         y = 50² / (2  9.8)

         y = 127.6 m

b) Flight time

this is the time it takes to reach the ground, the reference system for this movement is taken on the ground this is a height of y = 0 m and the body is at an initial height of i = 100m

         y = y₀ + v₀ t - ½ g t²

       0 = 100 + 50 t - ½ 9.8 t²

we solve the quadratic equation

        4.9 t² - 50 t - 100 = 0

         t = [tex]\frac{50 \pm \sqrt{50^2 + 4 \ 4.9 \ 100} }{2 \ 4.9}[/tex]

         t = [tex]\frac{50 \ \pm \ 66.8}{9.8}[/tex]

         t₁ = 11.9 s

         t₂ = -8.4 s

flight time is 11.9s

c) The time 1 s before hitting the ground is

        t1 = 11.9 -1

        t1 = 10.9 s

let's find the vertical speed

       v_y =[tex]v_{oy}[/tex] - g t

       v_y = 50 - 9.8 10.9

       v_y = -56.8 m / s

the negative sign indicates that the direction of the velocity is downward.

On the x-axis there is no acceleration therefore the speed is constant.

Let's use the Pythagorean theorem

        v = [tex]\sqrt{v_x^2+v_y^2}[/tex]

        v = [tex]\sqrt { 86.6^2 + 56.8^2}[/tex]

        v = 103.6  m / s

let's use trigonometry

        tan θ = [tex]\frac{v_y}{v_x}[/tex]

        θ = tan⁻¹  \frac{v_y}{v_x}

        θ = tan⁻¹  (-56.8 / 86.60)

        θ = -33.3º

the negative sign indicates that it is measured clockwise from the x-axis

for a counterclockwise measurement

          θ’= 360 - θ

          θ' = 360 - 33.3

          θ’= 326.7º

Answer:

C. Amount of oxygen

Explanation:

Options A and D are invalid as they aren't affecting factors.

Option B is false as the altitude increases as you go up a mountain.

Option C is true as the air pressure (atmospheric pressure) is inversely proportional to the height/altitude of the mountain.

Answer:

liquid, solid, and gas. A heating curve shows how the temperature changes as a substance is heated up at a constant rate.

Explanation:

liquid is often the bridge between solid and gas

not always, but most times.

For water, liquid water would probably be at temperature Y= 32- 212 degrees F, or Y= 0-100 degrees C.

Apologies, I hope this helps.

Answer:

r = 14.13 m

Explanation:

Given that,

Charge 1, q₁ = +0.0129 C

Charge 2, q₂ = -0.00707 C

The force between charges, F = 4110 N

We need to find the distance between charges. The formula for the force between charges is given by :

[tex]F=k\dfrac{q_1q_2}{r^2}[/tex]

Where

r is the distance between charges

So,

[tex]r=\sqrt{\dfrac{kq_1q_2}{F}} \\\\r=\sqrt{\dfrac{9\times 10^9\times 0.0129 \times 0.00707 }{4110 }} \\\\r=14.13\ m[/tex]

So, the distance between charges is equal to 14.13 m.

Answer:

14.13 m

Explanation:

acellus

Answer:

245 divided by 5.14=47.6653696 or 47.66

Explanation:

Answer:

please give me brainlist and follow

Explanation:

Using locally available resources for art help in the preservation of environment. A significant and practical aspects of art is material significance. The items used by artists while making an art piece affects both the form and the material. Every material delivers something special in the creative process.

The well that will have most of the water will be well A.

The underground water supply is defined as a type of water that exists underground in saturated zones beneath the land surface.

From the two wells represented in the diagrams above, Well A has water supply from underground which is lacking in well B.

Therefore, well A will have most of the water more than B.

Learn more about water cycle here:

https://brainly.com/question/25796102

#SPJ1

Answer:

Explanation:

Point of zero velocity are extreme points situated on either side of equilibrium position .

a )

Time taken to travel between these two points is .15 s

time for half the oscillation = .15 s

Time for full one oscillation = .30 s .

Time period of oscillation = .30 s

b)

frequency = 1 / time period

= 1 / .30s = 3.33 oscillation per second.

c )

Distance between these two point is equal to two times amplitude

2 x amplitude = 30 cm

amplitude = 15 cm