Answer:
€0.98 per liter = 4.377 doller per gallon
Explanation:
It is given that, In Europe, gas cost approximately €0.98 per liter. We need to convert it into dollars($) per gallon.
We know that, 1 euro = 1.18 United States Dollar
1 litre = 0.264172 US gallon
Cost of gas in Europe is €0.98 per liter.
[tex]0.98\ \text{euro/ liter}=\dfrac{0.98\times 1.18\ \text{doller}}{0.264172\ \text{gallon}}\\\\=4.377\ \text{doller/gallon}[/tex]
What is the displacement of the elevator between 8 s and 24 s?
Answer:
The displacement of the elevator between 8 s and 24 s is 6 m.
Explanation:
Given that,
Initial time = 8 s
Final time = 24 s
We know that,
Displacement :
Displacement is the difference between initial position and final position.
In mathematically,
[tex]D=x_{f}-x_{i}[/tex]
We need to calculate the displacement
Using formula of displacement
[tex]D=x_{f}-x_{i}[/tex]
Put the value from graph
[tex]D=15-9[/tex]
[tex]D=6\ m[/tex]
Hence, The displacement of the elevator between 8 s and 24 s is 6 m.
Answer:
See attached.
Explanation:
See attached.
action and reaction are equal in magnitude and opposite in direction then why do they not balance each other.
Answer:
Newton’s third law of motion states that every action has an equal and opposite reaction. This indicates that forces always act in pairs. Reaction forces are equal and opposite, but they are not balanced forces because they act on different objects so they don’t cancel each other out.
action and reaction are equal in magnitude and opposite in direction then , why do not they balance each other
Explanation:
Newton’s third law of motion states that every action has an equal and opposite reaction. This indicates that forces always act in pairs. Reaction forces are equal and opposite, but they are not balanced forces because they act on different objects so they don’t cancel each other out.
If a train (travelling from Albuquerque to Atlanta) is moving 33.9 meters per second when it accelerates at -2.02 m/s^2 for 1.01 seconds, what is the final velocity
Answer:
The final velocity is 31.86 m/s.
Explanation:
The final velocity can be found using the following equation:
[tex] V_{f} = V_{0} + at [/tex]
Where:
[tex]V_{f}[/tex] is the final velocity =?
[tex]V_{0}[/tex] is the initial velocity = 33.9 m/s
a is the acceleration = -2.02 m/s²
t is the time = 1.01 s
[tex] V_{f} = V_{0} + at = 33.9 m/s + (-2.02 m/s^{2})*1.01 s = 31.86 m/s [/tex]
Therefore, the final velocity is 31.86 m/s.
I hope it helps you!
Question 8 of 10
Which term refers to a variable that a scientist adjusts during an experiment?
A. Dependent variable
B. Manipulated variable
C. Responding variable
D. Empirical variable
Answer:
B. Manipulated Variable
Answer:responding variable
Explanation:
Apex users
Why are chloroplasts found in plant cells but NOT in animal cells?
Answer:
Its is because plants dont get sugar from eating food so, they need chloroplast to make food with the help of sunlight.Whereas animal can get sugar from the food they eat.
a mineral has a mas of 53grams. Its volume is 12millileters. What is the
density?
Answer:
636
Explanation:
Answer:
4.45 g/mL
Explanation:
to get density, you simply divide the volume by the mass, so your equation would look like p= 53/12
P being density, which is what you are solving for! Hope this helps!!
a car travels at a speed of 30 mph. how far does the car travel in 2 hours
Answer:
The car would travel 60 miles in 2 hours.
Explanation:
The distance for an hour is already given, 30 miles per hour.
Given this you could multiply 30 by 2 which gives you 60.
The distance of the car is its speed times the time taken. The speed of the car is 30 miles per hour and time of travel is 2 hours. Then, the distance travelled is 60 miles.
What is speed?Speed of a moving object is the measure of the distance travelled per unit time. The rate of speed is called velocity. Velocity of an object is a vector quantity.
As the object is covering more distance within small time, then the object is said to have greater speed. Speed of an object also depends on is mass.
Given the speed = 30 mph
time taken = 2 hours
distance = speed × time
= 30 × 2 = 60 miles.
Therefore, the distance travelled by the car is 60 miles.
Find more on speed:
https://brainly.com/question/7359669
#SPJ2
1. In a biology experiment the number of yeast cells is determined after 24 hours of growth at
different temperatures.
a) Identify the independent and dependent variables in the experiment.
Answer:
Find the answer in the explanation
Explanation:
Given that In a biology experiment the number of yeast cells is determined after 24 hours of growth at different temperatures
The dependent variable depends on the value of the independent variable.
From the question above,
The independent variable is the temperature
While the dependent variable is the number of yeast cells
*You water some plants with 4 different types of water (salt water, regular water, sugar water and distilled water). After a two-week period, the height of the plants is measured.
1) Independent Variable (IV):
2)Dependent Variable (DV):
3)Constants:
4)Control:
Answer:
Please find the answer in the explanation
Explanation:
Given that some plants were watered with 4 different types of water (salt water, regular water, sugar water and distilled water). After a two-week period, the height of the plants is measured.
1.) The Independent Variable (IV) are the different types of water
2)Dependent Variable (DV) are the height of the plant. Dependent variable depends on the independent variable.
3)Constant is the unchanged parameter which is the period - the two weeks
4)Control: is the quantity of water used.
A perfect bouncy ball would continue bouncing the same height forever. But in reality, the ball stops bouncing because energy is "lost" to ...
A.sound energy
B.compression of the ball
C.heat energy absorbed by the ball
D.all answers are true
Answer:
D. all answers are true
The ball stops bouncing because energy is to sound energy, compression of the ball, and heat energy absorbed by the ball. Thus, the correct option is D, i.e. all of the above.
How energy is lost in a physical state?The law of conservation of energy, it states that energy can neither be created nor be destroyed in any physical state, although it may get transformed into another form.
The same principle is followed by the bouncing ball. In a closed system, its energy is never lost but it may get transformed into sound energy, heat energy which is absorbed by the ball, and compression which stimulates the process of bouncing the ball.
It is a principle of physical science that due to some characteristics the energy may be transformed into other form.
Therefore, the correct option is D, i.e. all of the above.
To learn more about Energy transformations, refer to the link:
https://brainly.com/question/961052
#SPJ2
A substance has density ρ, mass m, and volume V. If the volume is tripled, what is the new mass?
Since the density of the substance is ρ (rho),
==> every cm³ of this substance has ρ grams of mass.
Then
==> V cm³ of it has ρV grams of mass. That's ' m '.
and
==> 3V cm³ of it has 3ρV grams of mass. That's ' 3m '.
If you add 50.0 mL of water to a beaker containing 22 mL of water, then how much water do you have in the beaker?
Answer:
72 mL
Explanation:
if you add 50.0 mL of water to a beaker containing 22 mL of water, then the total in the beaker is 50.0 + 22 = 72 mL
2. A car is moving south. It is getting faster. In which direction is the acceleration?
North
South
hy
Up
Down
A car goes from 30 m/s to 20 m/s in 2 seconds. What is the acceleration of the car in m/s2?
Answer:
[tex] \boxed{\sf Acceleration \ of \ the \ car = -5 \ m/s^2} [/tex]
Given:
Initial speed (u) = 30 m/s
Final speed (v) = 20 m/s
Time taken (t) = 2s
To Find:
Acceleration (a) of the car
Explanation:
From equation of motion we have:
[tex] \boxed{ \bold{v = u + at}}[/tex]
By substituting value of v, u & t in the equation we get:
[tex]\sf \implies 20 = 30 + a(2) \\ \\ \sf \implies 2a + 30 = 20 \\ \\ \sf \implies 2a = 20 - 30 \\ \\ \sf \implies 2a = - 10 \\ \\ \sf \implies a = - \frac{10}{2} \\ \\ \sf \implies a = - 5 \: m {s}^{ - 2} [/tex]
[tex] \therefore[/tex]
Acceleration (a) of the car = -5 m/s²
How is data recorded in science?
Answer:
Yes
Explanation:
You need data to be able to compare experiments and come up with predictions.
How can you use the position-time graphs for two in-line skaters to determine if and when one in-line skater will pass the other one?
Explanation:
Position-time graphs measure/express the position of a skater over time relative to the start or finish of the race (depends on how it is used). Note: are the skaters in line vertically or horizontally? Like is one directly behind the other or are they next to each other?
If the two skaters are in line horizontally with each other, then their position will be the same relative to the start or finish of the race. This means if one passes the other one, the position would be different for all times after they pass. On the graph, it would look like one single line at the start (as position is same) which splits into 2 (representing the new difference in position due to 1 passing the other.
If the two skaters are in line vertically, their lines on the graph will appear parallel to each other (assuming they are going same speed) because the position is changing at the same rate, one is just reaching the same point after the other. If the skater behind overtakes the one in front. The lines on the graph will cross and continue either in parallel but with the other line on top to represent the moment where their position is the same right before they pass and after, where the second skater is now in front.
Hope this helped!
on, Inc., publishing as pe
6. Circle the letter before each element that is a gas at room temperature.
a. carbon
c. mercury
d. nitrogen
b. oxygen
only 90% can dothis plz helpme i will give brainliest brainliest brainliest brainliest brainliest brainliest brainliest brainliest brainliest brainliest brainliest Why magnetic bodies lose magnetic force? Why a nail gets magnetized when kept close to magnet? Why two pins attracted by bar magnet maintain distance between their ends? Why magnet do not have ,magnetic force in middle?
The force exerted by a magnet is called The push or pull of magnetism can act at a distance, which means that the magnet does not have to touch an object to exert a force on it. ... In fact, magnetism is the result of a moving electric charge.Explanation:
thanks! i need the brainliest to level up :)
1. Heat causes magnetic bodies to lose their magnetic force. For each material of magnet, there is a Curie temperature, or temperature at which the heat will destroy the polarization of the material, causing it to loses its magnetic properties.
2. In unmagnetized materials the domains are randomly aligned in different directions and cancel each other out. In a magnet, all the domains are oriented in the same direction. In the case of a nail, the domains can be aligned in the same direction causing the nail to become magnetic.
3. because after got attracting they will also got act as magnets since they would also get North and South poles so in the case of same poles they had repulsion.
4. We know that magnetic fields exert forces on moving electrons for example. ... When you are in the middle of the magnet, the metal object is being pulled more or less equally in both directions, and so the result is that the object doesn't really feel a force in either direction, they cancel each other out.
i hope this helps you!! <3
What is the final speed of a lion initially running at a speed of 30 m/s, if it accelerates at
a rate of 3 m/s3 for 5 seconds?
Given the information in the velocity vs. time graph,
what is the displacement of the object after 1 second?
m
After 3 seconds?
m
After 5 seconds?
Answer:
Given the information in the velocity vs. time graph, what is the displacement of the object after 1 second?
3m
After 3 seconds?
9m
After 5 seconds?
15m
Explanation:
The displacement of the object after 1-second would be 3 m, the displacement of the object after 3 seconds would be 9 m, and the displacement of the object after 5 seconds would be 15 sec
What is Velocity?The total displacement covered by any object per unit of time is known as velocity. It depends on the magnitude as well as the direction of the moving object. The unit of velocity is meter/second.
The mathematical relation between displacement and velocity is given by
Total displacement=Total time×velocity
As given in the problem A velocity-time graph is shown, displaying the behavior
Velocity from the velocity time graph
velocity =3 m/s
As we know the area under the velocity time curve represents the displacement covered by the object
displacement of the object after 1-second = 3×1
= 3 m
displacement of the object after 3-second = 3×3
= 9 m
displacement of the object after 5-second = 3×5
= 15 m
Thus, The displacement of the object after one second, three seconds, and five seconds would be three meters, nine meters, and fifteen meters, respectively.
Learn more about Velocity from here
brainly.com/question/18084516
#SPJ2
a kayaker moves 32 meters northward then 6 meters southward finally 24 meters northward
Answer:
50m [N]
Explanation:
Think of these directions as if they were on a 2D plane. (if you're talking about displacement)
If you go 32m [N] then 6m [S], it's like you're moving backwards (-). (thus, 32n-6s=26m [N])
Next, you go north again, so moving forwards (+). (thus, 26n+24n=50m [N])
The distance he paddled was (32m + 24m + 6m) = 56 meters.
His displacement after that was (32m - 6m + 24m) = 50 meters north.
Un cuerpo de m=0,5 Kg se desplaza horizontalmente con v=4m/s y luego de un lapso de tiempo se mueve con v=20 m/s. ¿cual ha sido la variación de la energÍa cinética?
Responder:
64 JuliosExplicación:
La energía cinética se expresa mediante la fórmula KE = 1 / 2mv² donde;
m es la masa del cuerpo
v es la velocidad del objeto
Dado que el cuerpo se mueve horizontalmente con v = 4 m / sy después de un período de tiempo se mueve con v = 20 m / s, entonces la variación en la velocidad será de 20 m / s - 4 m / s = 16 m / s.
Parámetros dados
masa del objeto m = 0,5 kg
Variación de velocidad = 16 m / s
Variación de la energía cinética = 1/2 * 0,5 * 16²
Variación de la energía cinética = 1/2 * 0,5 * 256
Variación de la energía cinética = 0,5 * 128
Variación de la energía cinética = 64 Julios
A driver starts her car and steps on the gas pedal. The car gradually
accelerates to 60 km/hr and maintains this velocity. A few minutes later, the driver suddenly slams on the brakes to avoid hitting a squirrel. As the car comes to a stop, the driver's body appears to lurch forward in the seat until it is restrained by the seat belt.
Which graph best represents the motion of a car described in the paragraph above?
Graph C
Graph D
Graph A
Graph B
Which of the following options correctly describe electromagnetic radiation? Select all that apply. Particles of electromagnetic radiation exhibit wave behavior. A particle of electromagnetic radiation is called a quantum. All electromagnetic radiation has the same frequency. Electromagnetic radiation includes visible light. The specific amount of energy a particular photon possesses is called a quantum.
Answer:
Particles of electromagnetic radiation exhibit wave behavior
Electromagnetic radiation includes visible light
The specific amount of energy a particular photon possesses is called a quantum
Explanation:
Electromagnetic waves propagate through space perpendicularly to a oscillating magnetic and electric field producing it. Both of these fields oscillates perpendicular to one another, and to the direction of propagation of the wave.
Electromagnetic waves exhibit both wave and particle light behaviors, this phenomenon is known as the wave-particle duality.
Visible light is part of the broad spectrum of waves in the electromagnetic wave spectrum. And each particle of an electromagnetic wave is known as a photon, and they carry energy in discrete amounts called quantum.
Electromagnetic radiation occurs when electric and magnetic fields emit radiations that travel in waves. Given this explanation, the options that correctly describe electronic radiation are;
Particles of electromagnetic radiation exhibit wave behavior.The specific amount of energy a particular photon possesses is called a quantum. Electromagnetic radiation includes visible light.Electromagnetic radiation is used to explain the disturbance that occurs when the electric and magnetic fields travel at the speed of light.
There are different frequencies of radiation that are emitted in the process. Some have high and low energies.
The radio waves, ultraviolet rays, and visible light are all examples of electromagnetic radiation
Learn more here:
https://brainly.com/question/1408043
state the sources of alternating current
Answer:
hudroelectricity
..........
Answer:
generator, crystal oscillator, alternator are sources of AC current.
Which of the following is not an essential feature of scientific explanations? a. They must be subject to testing. b. They strictly pertain to the physical world. c. Their validity is judged based on objective observations. d. Once supported by observation, they can be viewed as a fact
Answer:b
Explanation:
The correct option is b.
The following are the essential feature of the scientific explanations:
It should be subjected to the testing. The validity should be judged depend upon the objective observations. Once the observation is supported afterwards it should be viewed as fact.Learn more: brainly.com/question/17429689
As Sam comes to a stop on his bike, he slows from 9.00m/s to 0.00m/s in 5.00 seconds. Find the average acceleration of Sam on his bike. Hint: It will be a negative number.
Explanation:
Acceleration is change in velocity over time.
a = (v − v₀) / t
a = (0.00 m/s − 9.00 m/s) / 5.00 s
a = -1.80 m/s²
A watch manufacturer claims that its watches gain or lose no more than 8 seconds in a year. How accurate are these watches, expressed as a percentage?
Answer:
Accurate at 99.9999746%
Explanation:
First of all, let's calculate how many seconds we have in a year which has 365 days.
1day = 24 × 60 × 60 seconds = 86400 s
Thus, for 365 days, we have;
86400 × 365 = 31536000 seconds
Now, since 1 year has 31536000 seconds, let's find the ratio of efficiency.
We are told that the watch manufacturer claims that its watches gain or lose no more than 8 seconds in a year. Thus, efficiency is given by;
Efficiency = (8/31536000) × 100% = 0.00002536783 %
Thus, it will be be accurate at;
100% - 0.00002536783% ≈ 99.9999746%
A train travels a 400-km route and makes five stops in seven hours. Which equation is used to calculate the train’s average speed?
A.
Average speed = Sum of instantaneous speeds
B.
Average speed = Total distance x Total time
C.
Average speed = Total distance + Total time
D.
Average speed = Total distance ÷ Total time