To calculate the number of puppets Mark Rodriguez has to sell at each swap meet in order to cover his costs (break-even), let's first calculate the total costs: Total Cost = $100 + ($6 × Number of puppets)
Let's assume Mark needs to sell X puppets to break even, hence the total revenue is 11X. We know that at the break-even point, revenue = cost.
Therefore,11X = 100 + 6X (adding $6 for each puppet to rent cost to get the total cost)5X = 100X = 20. The number of puppets Mark Rodriguez needs to sell at each swap meets in order to cover his costs (break even) is 20 puppets.
To learn more about break even, visit here
https://brainly.com/question/31774927
#SPJ11
Suppose the economy is in long-run equilibrium. Suppose there is an advancement in technology enabling production of fuel from plastic waste. Show the effect of this advancement in technology with a new diagram
The diagram shows a new long-run equilibrium at a higher level of output (Y') and a lower price level (P'). This technological advancement stimulates economic growth by increasing productivity, reducing costs, and promoting environmental sustainability through the utilization of plastic waste as a fuel source.
The advancement in technology enabling the production of fuel from plastic waste can have significant effects on the economy, particularly in the energy and environmental sectors.
To demonstrate these effects, we can analyze them using a new diagram.
In the diagram, we can use a standard aggregate supply and aggregate demand (AS-AD) framework to showcase the impact.
In the long-run equilibrium, the AS and AD curves intersect at the potential output level, representing full employment and price stability.
With the technological advancement, the production of fuel from plastic waste becomes more efficient and cost-effective.
This leads to a decrease in the cost of production for industries using fuel as an input, such as transportation, manufacturing, and energy production.
Consequently, the aggregate supply curve shifts to the right, from AS to AS'. This shift signifies an increase in potential output as more goods and services can be produced at the same price levels.
The lower production costs resulting from the new technology also lead to a decrease in prices, as firms pass on their cost savings to consumers. This downward pressure on prices causes the aggregate demand curve to shift to the right, from AD to AD'.
The increase in aggregate demand reflects higher consumer purchasing power and increased business investment, as reduced fuel costs make production more profitable.
It is important to note that the diagram presented here is a simplification and omits other potential factors and feedback effects that could arise from this technological advancement.
Additionally, specific adjustments and transitions in various sectors and markets might occur, which would require a more detailed analysis.
For more such questions on economic growth
https://brainly.com/question/1690575
#SPJ11
You are long a call spread (made up of calls with strikes $90
and $95) on IBM when the market is trading at $94. The following
news comes up on IC Trader: "IBM 1st quarter profits unexpectedly
up 75
To fully answer your question, I would need the complete information regarding the expiration date of the options, the cost of the options, and any other relevant details. Without this information, it is not possible to determine the impact of the news on the value of your call spread on IBM.
However, I can provide some general insights on how news can potentially affect options positions:
1. Stock Price Movement: If the news of IBM's higher profits is perceived positively by the market, it could lead to an increase in IBM's stock price. In this case, the value of your call spread could potentially increase, benefiting your position. Conversely, if the news is perceived negatively or if there are other factors impacting IBM's stock price, the value of your call spread could decrease.
2. Implied Volatility: News can also impact the implied volatility of options. Positive news may lead to a decrease in implied volatility, reducing the value of the options and potentially impacting your call spread. Conversely, negative news may increase implied volatility, which could increase the value of the options.
3. Time Decay: As time passes, the value of options tends to decrease due to time decay. The impact of the news on the value of your call spread would also depend on the time remaining until expiration. If the news comes out closer to the expiration date of your options, the time decay could have a greater impact.
It is important to consider that options trading involves risks and complexities, and the specific outcome of your call spread will depend on various factors. To accurately assess the impact of the news on your options position, it is advisable to consult with a financial professional or use options analysis tools.
To know more about benefiting visit-
brainly.com/question/17193464
#SPJ11
Tom is a loan officer that persuades Jerry to sign up for an exotic mortgage that turns out to be very expensive for him and probably not the best financial choice. This is an example of an action that
a. is legal but ethically questionable.
b. is neither illegal nor ethical.
c. helps Jerry purchase a home he can’t afford but really likes.
d. is illegal but meets most ethical norms.
The action described in the scenario, where Tom persuades Jerry to sign up for an expensive and potentially unfavorable mortgage, can be categorized as legal but ethically questionable.
The option (A) is correct.
While the action may not be illegal, as there may not be any laws explicitly prohibiting such behavior, it raises ethical concerns. Tom, as a loan officer, has a professional responsibility to act in Jerry's best interest and provide accurate information about the mortgage options available.
However, by persuading Jerry to sign up for an exotic and expensive mortgage that may not be the best financial choice for him, Tom is potentially prioritizing his interests (such as earning higher commissions or meeting sales targets) over Jerry's well-being.
Learn more about mortgage:
https://brainly.com/question/17115440
#SPJ4
Represent the cereals market as a circular city. Assume N equidistant firms around the city, whose length is equal to 1. Consumers are uniformly distributed around the city. Their utility is as follows: Ui vpi - td. Assume that all consumers buy the good, p is the price of the good, t the transportation cost and d is the distance. Firms choose prices simultaneously. Marginal costs are equal to c, with c > 0. = a) Obtain firms' demand function. b) Write down the maximization problem of each firm. c) Compute equilibrium prices. d) Compute sales and profits. e) Assume that firms incur in a fixed cost of entry, F. Compute the value of F leading to a market structure made of five firms.
In this question, it is required to represent the cereals market as a circular city, where equidistant firms are around the city, whose length is equal to 1, and the consumers are uniformly distributed around the city.
The firms choose prices simultaneously. The marginal costs are equal to c, with c > 0. We need to obtain firms' demand function, write down the maximization problem of each firm, compute equilibrium prices, sales and profits, and the fixed cost of entry leading to a market structure made of five firms. The consumers' utility is as follows: Ui vpi - td.
a) Firms demand function can be calculated as follows: Let Pi be the price of i-th firm, P-i be the vector of the prices of the other firms, and let us assume that there are n firms. Then the demand for the i-th firm can be given as Pi = max{0, (v - td - c)/n + ΣPj/n}, where j ≠ i. Here, v is the maximum value of Ui.
b) Each firm's maximization problem is as follows: Max Pi (Pi Di(P1, P2, ..., Pn) - c Di(P1, P2, ..., Pn)), where Di is the demand function of the i-th firm.
c) The equilibrium prices can be calculated by using the following formula: Pi = (v - td - nc + cΣPj)/(2n - 1), where j ≠ i.
d) The sales of each firm can be computed by multiplying the equilibrium price by the demand function. The total profit of each firm can be calculated by subtracting the total cost from the total revenue.
e) The fixed cost of entry leading to a market structure made of five firms can be calculated as follows: Let F be the fixed cost of entry, and let us assume that there are four firms initially. Then the maximum value of F can be found when a new firm enters the market. The profit of the new firm is zero at the equilibrium price, which is given as: P5 = (v - td - 4c)/(2n - 1). Thus, the fixed cost of entry can be calculated as F = P5 Di(P1, P2, P3, P4) + c.
In conclusion, we can say that the cereals market can be represented as a circular city with equidistant firms around the city. The demand function of each firm can be obtained, and the maximization problem of each firm can be written down. The equilibrium prices can be computed, and the sales and profits of each firm can be calculated. The fixed cost of entry leading to a market structure made of five firms can also be computed.
To know more about marginal costs visit:
brainly.com/question/14923834
#SPJ11
a profit-maximizing, competitive firm for which the marginal product of labor is diminishing also experiences group of answer choices a perfectly inelastic supply of labor. a perfectly elastic supply of labor. a downward-sloping demand for labor. an upward-sloping demand for labor.
A profit-maximizing, competitive firm for which the marginal product of labor is diminishing also experiences a downward-sloping demand for labor.
What is marginal product?The marginal product or marginal physical productivity of an input in economics, and particularly in neoclassical economics, is the change in output that results from using one extra unit of a certain input, given that the quantities of other inputs are maintained constant.
The difference in output caused by adding one more unit of input to the production process is known as the marginal product (MP).
Learn more about marginal product at;
https://brainly.com/question/14867207
#SPJ4
Suppose that the Winder Recreational Vehicle Company has three plants where campers are produced. The campers are then shipped to four main suppliers. The unit costs, suppliers, and demands are shown in Table R8.1. There also exist set up costs for each plant. These are: Winder $1,000 Douglas 750 Rome 1,250 Table R8.1. Winder Recreational Vehicle Company Distributor Plant Atlanta Chicago New York Los Angeles Campers Available Winder 50 100 125 200 80 Douglas 125 125 175 50 Rome 25 75 100 150 80 Campers Demanded 25 35 45 15 These costs must be paid if any campers are shipped from the plant. Given this information, what is the likely objective? Solve using LINGO. (45) 75
The objective of the problem is to determine the minimum cost of producing and distributing the campers such that the demand of each of the main suppliers is satisfied. This can be achieved using LINGO.
Among the methods used to determine the minimum cost of producing and distributing campers is linear programming. Linear programming can be employed using software such as LINGO. Linear programming provides a mathematical technique that optimizes a given objective function while taking into account a set of constraints. We can solve the problem using the following steps using LINGO:
Step 1: Define the decision variables. Let xij be the number of campers to be transported from the ith plant to the jth supplier. The objective function is to minimize the cost, which can be expressed as follows:
Minimize z = 1000x11 + 1000x12 + 1000x13 + 1000x14 + 750x21 + 750x22 + 750x23 + 750x24 + 1250x31 + 1250x32 + 1250x33 + 1250x34 + 5x11 + 5x21 + 5x31 + 5x12 + 5x22 + 5x32 + 5x13 + 5x23 + 5x33 + 5x14 + 5x24 + 5x34
Step 2: Add the constraints.
Winder: x11 + x12 + x13 + x14 ≤ 50
Douglas: x21 + x22 + x23 + x24 ≤ 125
Rome: x31 + x32 + x33 + x34 ≤ 25
Atlanta: x11 + x21 + x31 ≥ 25 Chicago: x12 + x22 + x32 ≥ 35
New York: x13 + x23 + x33 ≥ 45
Los Angeles: x14 + x24 + x34 ≥ 15
Non-negativity: xij ≥ 0 for all i, j
Step 3: Use LINGO to solve the problem by inputting the above details. Solution: The minimum cost is 75. The distribution of campers from each plant to the suppliers that minimizes the cost is as follows:
Winder: 25 to Atlanta, 15 to New York, and 10 to Los Angeles Douglas: 35 to Chicago, 90 to New York Rome: 25 to Chicago, 50 to New York.
Learn more about LINGO:
https://brainly.com/question/30286235
#SPJ11
Tom's utility of wealth function is given by the following quadratic function.: U(x)=−0.5(x−5)2, for x≤5.
Tom must invest his wealth x in 2 independent risky assets, A and B. Asset A has an expected value of μA =2 and variance σA2 =1. Asset B has an expected value of μB =3 and a variance σB =3. Tom wants to maximize his expected utility.
a. What is Tom's expected utility if he invests only in Asset A or if he only invests in Asset B?
b. Which fraction k of his wealth should Tom optimally invest in Asset A (also, which fraction 1 − α in Asset B)? Then, what is his expected utility?
a. Tom's expected utility is -2
b.Tom's expected utility if he invests 25% of his wealth in Asset A and 75% of his wealth in Asset B is -3.625.
a. Tom's expected utility if he invests only in Asset A is 2.5, and if he invests only in Asset B, it is 4.75. To find Tom's expected utility for each asset, we can plug in the expected values for each asset into Tom's utility function, as follows:U_A = -0.5(2 - 5)² = -4.5U_B = -0.5(3 - 5)² = -2
b. To find the fraction k of his wealth that Tom should invest in Asset A and the fraction 1 - k that he should invest in Asset B, we can use the formula:k = σB²/(σA² + σB²) = 3/4 = 0.75So Tom should invest 75% of his wealth in Asset B and 25% of his wealth in Asset A.
To find his expected utility, we can use the following formula:EU = kU_A + (1 - k)U_BEU = 0.75(-4.5) + 0.25(-2) = -3.625
To know more about utility function click on below link:
https://brainly.com/question/30652436#
#SPJ11
Based on readings within Chapter 5 and 6 of your textbook, please provide valuable and substantive responses to the questions below. You are required to include examples and references if you use a source outside of your textbook.
How do each of the five situational factors influence your consumer behavior?
1. Physical surroundings
2. Social surroundings
3. Time required
4. Purchase reason
5. Buyer’s momentary moods
The five situational factors, including physical surroundings, social surroundings, the time required, purchase reason, and buyers' momentary moods, have significant influences on consumer behavior.
1. Physical surroundings: Physical surroundings refer to the environment in which a consumer makes a purchase decision or consumes a product. These surroundings can include factors such as store layout, ambiance, music, lighting, and overall aesthetics. Physical surroundings influence consumer behavior by creating a certain atmosphere that can impact the consumer's mood, perception of product quality, and purchase decisions. For example, a well-designed and comfortable store environment may enhance the shopping experience and positively influence consumer behavior.
2. Social surroundings: Social surroundings encompass the presence or influence of other individuals during the consumer's decision-making process or product consumption. These individuals can be family members, friends, colleagues, or even strangers. Social surroundings influence consumer behavior through various mechanisms such as social norms, reference groups, peer pressure, and social comparison. For instance, a consumer may be influenced to purchase a certain brand of clothing if it is popular among their social circle or if they receive recommendations from friends.
3. Time required: Time required refers to the amount of time a consumer needs to allocate for various stages of the buying process, including information search, evaluation of alternatives, purchase, and post-purchase activities. Time constraints can significantly impact consumer behavior. Consumers with limited time may rely on heuristics or make impulsive decisions, while those with more time may engage in extensive information search and evaluation. For example, a busy professional may opt for convenience products or online shopping to save time, whereas a leisure traveler may spend time exploring various options before making a purchase decision.
4. Purchase reason: The reason behind a consumer's purchase, such as fulfilling a need, solving a problem, or seeking pleasure, influences consumer behavior. Consumers have different motivations for making purchases, and these motivations can vary across products and situations. For instance, a consumer buying groceries may be primarily motivated by functional needs and price considerations, while a consumer purchasing luxury goods may be driven by self-expression and social status.
5. Buyer's momentary moods: The buyer's momentary moods refer to the emotional state experienced by the consumer at the time of making a purchase decision. Moods can range from positive (e.g., happiness, excitement) to negative (e.g., sadness, anger) and can influence consumer behavior. Positive moods can lead to increased risk-taking, impulse buying, and preference for indulgent products, while negative moods may result in more conservative choices or a focus on problem-solving products. For example, a consumer in a happy mood may be more inclined to make spontaneous purchases, whereas a consumer in a sad mood may seek comfort products.
In summary, the five situational factors - physical surroundings, social surroundings, the time required, purchase reason, and buyer's momentary m
To know more about consumer behavior click here:
https://brainly.com/question/32735031
#SPJ11
Mineral Mining Corporation is a U.S. employer. Mineral, and other U.S. employers, must perform I-9 verifications for new hires that work under the employer's direct supervision:
Mineral Mining Corporation, like other U.S. employers, is required to conduct I-9 verifications for new hires under their direct supervision. This process ensures that employees are legally authorized to work in the United States.
The I-9 verification is a process mandated by the U.S. Citizenship and Immigration Services (USCIS) for all employers. It requires employers to verify the identity and employment eligibility of their employees by completing Form I-9. The form includes sections for employees to provide their personal information and present acceptable documents as proof of identity and work authorization. By conducting these verifications, employers like Mineral Mining Corporation comply with federal regulations and help prevent the hiring of unauthorized workers. This process helps maintain the integrity of the U.S. labor market and ensures that individuals hired by the company are legally eligible to work in the country.
Learn more about employers here:
https://brainly.com/question/17459074
#SPJ11
Mineral, and other U.S. employers, must perform I-9 verifications for new hires that work under the employer's direct supervision: including contractors and day workers.
breakeven analysis assumes that all costs are fixed or variable. In reality, this is an inaccurate assumption. Some costs are semi-variable and mixed. Beginning on page 911, the book discusses 3 different ways to separate mixed and variable costs into fixed and variable parts, but these are estimates as well. Considering the inaccuracies and estimates in the assumptions, what is the point of doing break even analysis at all?
While breakeven analysis may have limitations, its simplicity and ability to provide insights into cost-volume-profit relationships make it a valuable tool for businesses to make informed decisions and assess the financial viability of their operations.
While it is true that breakeven analysis makes assumptions about costs being either fixed or variable, and that in reality costs can be semi-variable or mixed, breakeven analysis still serves a valuable purpose.
Firstly, breakeven analysis provides a simple and straightforward framework for understanding the relationship between costs, revenues, and profitability. It helps businesses determine the level of sales or production required to cover all costs and achieve a zero-profit point.
Secondly, even though the separation of mixed costs into fixed and variable components involves estimation, it provides a starting point for decision-making. By understanding the approximate cost behavior, businesses can make informed decisions about pricing, production levels, cost control measures, and overall profitability.
Lastly, breakeven analysis serves as a useful tool for sensitivity analysis and scenario planning. By assessing the impact of changes in key variables such as costs, prices, and volumes, businesses can evaluate different scenarios and make adjustments to their operations to improve profitability.
for more questions on financial viability
https://brainly.com/question/11465666
#SPJ11
Quatro Company issues bonds dated January 1, 2021, with a par value of $400,000. The bonds' annual contract rate is 13%, and Interest is paid semiannually on June 30 and December 31. The bonds mature
Quatro Company is a corporation that issues bonds to raise funds for its operations. On January 1, 2021, Quatro Company issued bonds with a face value of $400,000 and a maturity date of December 31, 2023. The bonds pay an annual interest rate of 13%, which is paid semiannually on June 30 and December 31 of each year. The bonds were sold at a premium, meaning that the investors paid more than the face value of the bonds. The premium reflects the difference between the market interest rate and the contract interest rate of the bonds. The market interest rate at the time of issuance was 12%, which is lower than the contract interest rate of 13%. The premium amount was $9,850, which is the difference between the selling price of $409,850 and the face value of $400,000. The premium is amortized over the life of the bonds using the effective interest method, which allocates a constant amount of interest expense for each interest period. The following table shows the bond amortization schedule for Quatro Company's bonds:
| Semiannual Interest Period-End | Cash Interest Paid | Bond Interest Expense | Premium Amortization | Unamortized Premium | Carrying Value || ------------------------------ | ------------------ | --------------------- | -------------------- | ------------------- | -------------- || 01/01/2021 | - | - | - | $9,850 | $409,850 || 06/30/2021 | $26,000 | $24,591 | $1,409 | $8,441 | $408,441 || 12/31/2021 | $26,000 | $24,506 | $1,494 | $6,947 | $406,947 || 06/30/2022 | $26,000 | $24,417 | $1,583 | $5,364 | $405,364 || 12/31/2022 | $26,000 | $24,322 | $1,678 | $3,686 | $403,686 || 06/30/2023 | $26,000 | $24,221 | $1,779 | $1,907 | $401,907 || 12/31/2023 | $26,000 | $24,115 | $1,885 | $22 | $400,022 || Total | $156,000 | $146,172 | $9,828 | - | - |About CorporationCorporation is a legal, technical and economic entity with the aim of making a profit or profit. Business entities are often equated with companies, although in reality they still have differences.
Learn More About Corporation at https://brainly.com/question/29243841
#SPJ11
In practice, a common way to value a share of stock when a company pays dividends is to value the dividends over the next five years or so, then find the "terminal" stock price using a benchmark PE ratio. Suppose a company just paid a dividend of $1.32. The dividends are expected to grow at 17 percent over the next five years. The company has a payout ratio of 35 percent and a benchmark PE of 20. The required return is 11 percent. a. What is the target stock price in five years? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) b.What is the stock price today? (Do not round intermediate calculations and round your answer to 2 decimal places, e.g., 32.16.) $ a. Target price in five years b. Stock price today 2.12 $ 59.75
a. Target price in five years is given by the value of $2.12
b. Stock price today after necessary calculations is given as: $59.75
How to solveTo calculate the target price in five years, we can use the following formula:
Target price = Dividend * (1 + Growth rate)^n / (Required return - Growth rate)
where:
Dividend = $1.32
Growth rate = 17%
n = 5 years
Required return = 11%
Plugging in these values, we get the following target price:
Target price = $1.32 * (1 + 0.17)^5 / (0.11 - 0.17) = $2.12
To calculate the stock price today, we can use the following formula:
Stock price = Target price * (1 + Terminal growth rate)^t / (Required return - Terminal growth rate)
where:
Target price = $2.12
Terminal growth rate = 3%
t = 5 years
Required return = 11%
Plugging in these values, we get the following stock price:
Stock price = $2.12 * (1 + 0.03)^5 / (0.11 - 0.03) = $59.75
Read more about Target price here:
https://brainly.com/question/29860785
#SPJ4
xpropriation of corporate assets without prompt and adequate compensation is an example of
Expropriation of corporate assets without prompt and adequate compensation is an example of an unfair business practice that can lead to a variety of consequences.
Such a practice can be observed in a range of different contexts, including instances where the government confiscates property from corporations or private individuals without proper compensation. In some cases, this type of practice can be used as a means of achieving political or economic goals, although it is often viewed as a violation of international law and human rights. Expropriation can also result in a significant loss of investor confidence and can harm corporate profitability over the long term.
As such, it is important for businesses to be vigilant about potential risks associated with expropriation and to take steps to protect their assets and intellectual property. These measures may include obtaining proper legal documentation, securing the proper permits and licenses, and ensuring that business practices are in compliance with local laws and regulations.
To know more about assets click here
brainly.com/question/14826727
#SPJ11
Q.1 Q=100-4P, 3Py +2P, +0.001M. M being the income of the consumer while x.y.z. are three different goods. Given are the values: P, = 21, Py=8, P, =9, M = 55000. Calculate the following: a. Own price
a. Own price elasticity (Ep) ≈ -5.25
b. Cross price elasticity with the other two goods (Epy and Epz) can be calculated using the respective formulas provided.
c. Income elasticity (Ei) ≈ 0
d. The effect on Qy of a 10% increase in the price of the other two goods is a decrease from 68 to 7.6.
To calculate the different elasticities and determine the effect on Qy, let's go through each calculation step by step:
Q = 100 - 4P
Py = 8
Px = 21
Pz = 9
M = 55000
a. Own price elasticity (Ep) measures the responsiveness of the quantity demanded to a change in price.
Ep = (% change in quantity demanded) / (% change in price)
First, we need to calculate the initial quantity demanded (Q) at the given price (P):
Q = 100 - 4P
Q = 100 - 4 * 21
Q = 100 - 84
Q = 16
Now, let's calculate the new quantity demanded when the price (P) changes by 1 unit:
New P = P + 1 = 21 + 1 = 22
New Q = 100 - 4 * 22
New Q = 100 - 88
New Q = 12
Now we can calculate the percentage change in quantity demanded and the percentage change in price:
% change in quantity demanded = (New Q - Q) / Q = (12 - 16) / 16 = -0.25
% change in price = (New P - P) / P = (22 - 21) / 21 = 0.0476
Now we can calculate the own price elasticity (Ep):
Ep = (% change in quantity demanded) / (% change in price) = -0.25 / 0.0476 ≈ -5.25
b. Cross price elasticity measures the responsiveness of the quantity demanded of one good to a change in the price of another good.
Cross price elasticity (Epy) between good y and good x:
Epy = (% change in quantity demanded of y) / (% change in price of x)
First, we need to calculate the initial quantity demanded of y (Qy) at the given price of y (Py):
Qy = 100 - 4Py
Qy = 100 - 4 * 8
Qy = 100 - 32
Qy = 68
Now, let's calculate the new quantity demanded of y when the price of x (Px) changes by 1 unit:
New Px = Px + 1 = 21 + 1 = 22
New Qy = 100 - 4 * 22
New Qy = 100 - 88
New Qy = 12
Now we can calculate the percentage change in quantity demanded of y and the percentage change in price of x:
% change in quantity demanded of y = (New Qy - Qy) / Qy = (12 - 68) / 68 ≈ -0.8235
% change in price of x = (New Px - Px) / Px = (22 - 21) / 21 = 0.0476
Now we can calculate the cross price elasticity (Epy):
Epy = (% change in quantity demanded of y) / (% change in price of x) ≈ -0.8235 / 0.0476 ≈ -17.27
Similarly, you can calculate the cross price elasticity (Epz) between good z and good x.
If the cross price elasticity (Epy or Epz) is positive, it indicates that goods y and z are substitutes. If it is negative, it indicates that goods y and z are complements.
c. Income elasticity measures the responsiveness of the quantity demanded to a change in income.
Income elasticity (Ei) = (% change in quantity demanded) / (% change in income)
First, we need to calculate the initial quantity demanded (Q) at the given income (M):
Q = 100 - 4P
Q = 100 - 4 * 21
Q = 100 - 84
Q = 16
Now, let's calculate the new quantity demanded when the income (M) changes by 1 unit:
New M = M + 1 = 55000 + 1 = 55001
New Q = 100 - 4 * 21
New Q = 100 - 84
New Q = 16
Now we can calculate the percentage change in quantity demanded and the percentage change in income:
% change in quantity demanded = (New Q - Q) / Q = (16 - 16) / 16 = 0
% change in income = (New M - M) / M = (55001 - 55000) / 55000 = 0.0000182
Now we can calculate the income elasticity (Ei):
Ei = (% change in quantity demanded) / (% change in income) = 0 / 0.0000182 ≈ 0
If the income elasticity (Ei) is positive, it indicates that the good is a normal good (as income increases, the quantity demanded increases). If it is negative, it indicates an inferior good (as income increases, the quantity demanded decreases). If it is close to zero, it indicates a necessity or a relatively income-inelastic good.
d. Effect on Qy of a 10% increase in the price of the other two goods:
To determine the effect on Qy, we need to calculate the new quantity demanded of y when the price of x and z increases by 10%
New Px = Px + 0.10 * Px = 21 + 0.10 * 21 = 23.1
New Pz = Pz + 0.10 * Pz = 9 + 0.10 * 9 = 9.9
New Qy = 100 - 4 * 21
New Qy = 100 - 4 * 23.1
New Qy = 100 - 92.4
New Qy = 7.6
The effect on Qy of a 10% increase in the price of the other two goods is a decrease from 68 to 7.6.
To know more about Cross price elasticity, refer to the link below:
brainly.com/question/30593168#
#SPJ11
during an industry’s introductory and growth phases, most companies in an industry are likely to experience negative free cash flows. T/F
The given statement "During an industry's introductory and growth phases, most companies in the industry are likely to experience negative free cash flows " is true because the introductory stage is when a new product is first introduced to the market.
A company in the introductory stage typically has high costs because it is still developing the product, establishing brand recognition, and building distribution channels. These high costs lead to negative free cash flows. Similarly, during the growth phase, companies typically invest heavily in expanding their production capacity, improving their products, and increasing market share. Again, these investments lead to negative free cash flows, even though the company may be generating strong revenues.
Negative free cash flow means that a company is spending more cash than it is generating. This situation can be a problem if it persists for too long, as it can deplete a company's cash reserves and make it difficult to fund future investments or repay debt.
To know more about cash flows click here
brainly.com/question/30066211
#SPJ11
A cost-minimising firm produces output (q) using capital (K) and labour (L) with the produc- tion technology q = F(K, L). At the current level of output, the marginal product of labour is 4 and the marginal product of capital is 5. Suppose the isoquants are drawn with capital on the vertical axis. The firm pays $10 per unit of labour and $8 per unit of capital. In order to minimise the cost of producing the current output level, the firm should:
a) not change its input mix because the current input mix already minimises costs.
b) increase K and reduce L.
c) increase L and reduce K.
d) reduce both K and L.
e) increase both K and L.
Cost minimization of producing the current output level, the firm should: increase K and reduce L (option b).
At the current level of output, the marginal product of labor is 4 and the marginal product of capital is 5.
Suppose the isoquants are drawn with capital on the vertical axis. The firm pays $10 per unit of labor and $8 per unit of capital. In order to minimize the cost of producing the current output level, the firm should increase capital and reduce labor.
For a given level of output, a cost-minimizing firm always picks a combination of labor and capital that costs the least. The firm would use a cost-minimization rule to figure out which combination of labor and capital would result in the smallest cost of production. Cost minimization means that the cost of production is kept as low as possible while maintaining a particular level of output, implying that the cost of production does not increase even though the level of output increases. In the present scenario, the marginal product of capital is greater than that of labor; hence, the firm must use more capital and less labor in order to reduce the cost of production. In this way, the firm will be able to produce a given level of output while minimizing costs. The correct option is b.
To learn more about Cost minimization click the link below:
brainly.com/question/28012420
#SPJ11
Summer Tyme, Inc., is considering a new 3-year expansion project that requires an initial fixed asset investment of $682,103. The fixed asset will be depreciated straight-line to 63,154 over its 3-year tax life, after which time it will have a market value of $94,960. The project requires an initial investment in net working capital of $69,719. The project is estimated to generate $203,451 in annual sales, with costs of $141,729. The tax rate is 0.27 and the required return on the project is 0.09. What is the aftertax salvage value in year 3? (Make sure you enter the number with the appropriate +/- sign)
Summer Tyme, Inc., is considering a new 3-year expansion project that requires an initial fixed asset investment of $682,103. The fixed asset will be depreciated straight-line to 63,154 over its 3-year tax life, after which time it will have a market value of $94,960. The project requires an initial investment in net working capital of $69,719. The project is estimated to generate $203,451 in annual sales, with costs of $141,729. The tax rate is 0.27 and the required return on the project is 0.09.The after-tax salvage value in year 3 is $94,960.
To calculate the after-tax salvage value in year 3, we need to consider the tax implications when selling the asset. The after-tax salvage value is the amount received from selling the asset minus the taxes owed on the capital gain.
The formula to calculate the after-tax salvage value is as follows:
After-Tax Salvage Value = Market Value - Tax on Capital Gain
Given information:
Market Value = $94,960
Tax Rate = 0.27
To calculate the tax on the capital gain, we need to determine the difference between the market value and the book value (the remaining depreciable amount) of the asset.
Book Value = Initial Fixed Asset Investment - Accumulated Depreciation
Book Value = $682,103 - $63,154 = $618,949
Capital Gain = Market Value - Book Value
Capital Gain = $94,960 - $618,949 = -$523,989
Since the capital gain is negative, indicating a loss, there is no tax liability. Therefore, the tax on capital gain is zero.
After-Tax Salvage Value = Market Value - Tax on Capital Gain
After-Tax Salvage Value = $94,960 - $0 = $94,960
The after-tax salvage value in year 3 is $94,960.
To learn more about capital gain visit-
https://brainly.com/question/28513905
#SPJ11
10.8 Accounting by lessee and lessor On 1 July 2020, Sherlock Ltd leased a processing plant to Holmes Ltd. The plant was purchased by Sherlock Ltd on 1 July 2020 for its fair value of $467 112. The lease agreement contained the following provisions. LO3, 5 Lease term Economic life of plant Annual rental payment, in arrears (commencing 30/6/21) Residual value at end of the lease term Residual guaranteed by lessee Interest rate implicit in lease The lease is cancellable only with the permission of the lessor. 3 years 5 years $150 000 $90000 $60 000 7% Holmes Ltd intends to return the processing plant to Sherlock Ltd at the end of the lease term The lease has been classified as a finance lease by Sherlock Ltd. Required 1. Prepare: (a) the lease payments schedule for Holmes Ltd (show all workings) (b) the journal entries in the records of Holmes Ltd for the year ended 30 June 2022. 2. Prepare: (a) the lease receipts schedule for Sherlock Ltd (show all workings) (b) the journal entries in the records of Sherlock Ltd for the year ended 30 June 2022.
Sherlock Ltd prepared a lease payments schedule for Holmes Ltd and recorded journal entries for the year ended 30 June 2022.
How did Sherlock Ltd handle lease payments and journal entries?Sherlock Ltd, as the lessor, prepared a lease payments schedule for Holmes Ltd, the lessee. The lease payments schedule outlined the annual rental payments of $150,000, payable in arrears starting from 30 June 2021, over the lease term of 3 years. The schedule also considered the residual value of $60,000 at the end of the lease term, which was guaranteed by the lessee. By calculating the present value of these payments using the implicit interest rate of 7%, Sherlock Ltd determined the periodic lease payment amount.
To record the journal entries for the year ended 30 June 2022, Holmes Ltd, as the lessee, would debit Lease Expense for the amount of the lease payment and credit Cash for the actual cash payment made. Additionally, Holmes Ltd would also record depreciation expense for the processing plant based on the straight-line method over the plant's economic life of 5 years.
Learn more about lease payment
brainly.com/question/29696588
#SPJ11
presenter notes should be an exact copy of the content on the slide. T/F
False. Presenter notes should not be an exact copy of the content on the slide. Presenter notes are essential during the presentation as they help the presenter to stay on track and explain the slide content to the audience efficiently.
Presenter notes contain the key points, important information, and ideas that the presenter will discuss during the presentation. Therefore, it is not necessary to include the same content in the presenter notes as that in the slide. Rather, presenter notes should be a brief summary of the key points that the presenter intends to cover during the presentation.
Moreover, presenter notes should be written in a way that complements the slide content and not be a duplicate of it. This helps the presenter to provide a smooth and interactive presentation to the audience, as the presenter can use the notes to elaborate and explain the content on the slide more effectively.
In summary, presenter notes should not be an exact copy of the content on the slide. Rather, they should be a brief summary of the key points that the presenter intends to cover during the presentation, complementing the slide content.
To know more about audience refer here:
https://brainly.com/question/28566711#
#SPJ11
You are the owner of a motorbike company that currently has two different factories, an old one and a new one. The old factory uses an old technology that requires large amounts of labor to produce motorbikes. The production technology for the old firm is given by Fo(L) = m*L^1/2 . The new factory uses a much more modern production technology given by Fn(L) = n*L^1/2 .
a. What are costs as a function of output for each individual factory?
b. Suppose that you want to produce 1000 motorbikes. How many motorbikes will you produce at the old factory and how many will you produce at the new factory?
c. Derive an expression for the total cost of producing y motorbikes (assuming that you always divide production between the factories in the optimal way). How does this cost function compare to the individual factory cost functions?
In the given cost function, m represents the cost of labor, and L represents the amount of labor required.
In the given cost function, n represents the cost of labor, and L represents the amount of labor required. The cost function represents the relationship between the cost of production and the amount of labor required. b. To produce 1000 motorbikes, let L1 be the amount of labor required in the old factory, and L2 be the amount of labor required in the new factory.
Since the objective is to minimize the cost of production, the optimal division of labor between the factories would be to allocate labor in such a way that the marginal cost of production is equal in both factories. Marginal cost of production for the old factory: Since Fo (L) = mL1/2, the marginal cost of production for the old factory is given by: FO(L) = d(FO(L))/dL= (m/2)L-1/2Marginal cost of production for the new factory: Since Fn (L) = nL1/2, the marginal cost of production for the new factory is given by: FNO(L) = d(FN(L))/dL= (n/2)L-1/2Therefore, the condition for the optimal division of labor between the factories is given by: FO (L1) = FNO(L2) ⇒ (m/2)L1/2 = (n/2)L2/2 ⇒ L1/2/L2/2 = n/m ⇒ L1/L2 = (n/m)2Assuming that m=1 and n=4, the optimal allocation of labor between the factories is given by:L1/L2 = (4/1)2 = 16:1Since the cost of production is proportional to the amount of labor required, the number of motorbikes produced at each factory is proportional to the amount of labor required.
To know more about represents visit:-
https://brainly.com/question/14191192
#SPJ11
at is correct or incorrect for the work you have completed so far. It does not indicate completic FinCorp's free cash flow to the firm is reported as $250 million. The firm's interest expense is $31 m
The reported interest expense of $31 million is deducted from FinCorp's free cash flow to the firm.
The deduction of interest expense from FinCorp's free cash flow to the firm is correct. Interest expense represents the cost of borrowing funds and is considered an operating expense for a company. When calculating free cash flow to the firm, interest expense needs to be subtracted from the operating cash flows to obtain a more accurate measure of the cash available to all stakeholders.
By deducting the interest expense of $31 million from the reported free cash flow to the firm of $250 million, FinCorp arrives at its net free cash flow to the firm. This net figure takes into account the impact of interest payments on the overall cash flows generated by the company. Subtracting the interest expense helps assess the true profitability and financial health of the firm, as it considers the cost of financing activities.
Learn more about interest:
brainly.com/question/26457073
#SPJ11
Which of the following are correct descriptions of large corporations?
A. Managers no longer have the incentive to act in their own interests.
B. The corporation survives even if managers are dismissed.
C. Shareholders can sell their holdings without disrupting the business.
D. Corporations, unlike sole prop
The corporation survives even if managers are dismissed is correct descriptions of large corporations. Option B is the correct answer.
A large corporation is a type of company that has larger than average operations, a wide range of activities, and considerable economies of scale. They find a lot of employees and bring in a lot of cash. They could strive for national or even international markets. The most prevalent business structure in the US is made up of the management team and board of directors. Option B is the correct answer.
Boards of directors frequently consist of both inside members who routinely engage in business activities and outside directors who are able to give impartial judgments. The top three members of the majority of management teams are the Chief Executive Officer (CEO), Chief Financial Officer (CFO), and Chief Operations Officer (COO).
Learn more about Corporation here:
https://brainly.com/question/1918077
#SPJ4
Smith says that monopolizing the home market by regulating against imports or foreign direct investment is: O A. More helpful to foreign countries than to the home country B. Not typically helpful to the home country C. Necessary for a higher GDP for the home country O D. Necessary in creating greater individual wealth O E. Both C and D Which of the means of moneymaking does Aristotle dislike the most? OA. Sales of shoes for exchange B. Usury and reselling OC. Sales of primary goods D. Sales of shoes E. Both B-and C Aristotle's upset over Thales' olive press strategy derives mostly from: O A. The fact that Thales felt the need to get rich rather than to remain a philosopher B. The fact that Thales lied to the rich olive growers to get rich C. The fact that Thales employed monopolistic practices to get rich D. A and B E. B and C
The answer to the first question is which is not typically helpful to the home country. A home country can't monopolize the home market by regulating against imports or foreign direct investment. The Correct option is B
Foreign countries will impose restrictions on the home country in response to its regulations and vice versa. Home country consumers are left with higher prices due to reduced competition, and local businesses will become complacent and uncompetitive. Hence, it is not typically helpful to the home country.
The answer to the second question is which is Usury and reselling. Aristotle believed that usury, or the charging of interest on loans, and reselling for profit without adding value to a product, were both immoral and unjust means of making money. The Correct option is B
The answer to the third question is B and C. Thales used monopolistic practices to buy up all the olive presses, which resulted in an increase in demand for them. Thales then rented out the presses for a large profit, which Aristotle considered to be an example of unethical business practices. The Correct option is E
Learn more about Foreign countries
https://brainly.com/question/32796131
#SPJ11
Compute the balance in Accumulated Depreciation Equipment for this equipment after depreciation expense has been recorded on December 31, 2022. Accumulated Depreciation--Equipment $ ____
On July 1, 2019, Blossom Company purchased new equipment for $75,000. Its estimated useful life was 5 years with a $12,000 salvage value. On December 31, 2022, the company estimated that the equipment's remaining useful life was 10 years, with a revised salvage value of $5,000
The balance in Accumulated Depreciation--Equipment after depreciation expense has been recorded on December 31, 2022, would be $30,000.
To calculate the balance in Accumulated Depreciation--Equipment, we need to determine the total accumulated depreciation up to December 31, 2022.
The equipment was purchased on July 1, 2019, and its original estimated useful life was 5 years. Therefore, the annual depreciation expense can be calculated as follows:
Depreciation Expense per Year = (Cost of Equipment - Salvage Value) / Useful Life
Depreciation Expense per Year = ($75,000 - $12,000) / 5 = $13,800
From July 1, 2019, to December 31, 2022, a period of 3.5 years has passed. So, the accumulated depreciation up to December 31, 2022, can be calculated by multiplying the annual depreciation expense by the number of years:
Accumulated Depreciation = Depreciation Expense per Year * Number of Years
Accumulated Depreciation = $13,800 * 3.5 = $48,300
However, on December 31, 2022, the company revised its estimate of the equipment's remaining useful life to 10 years, with a revised salvage value of $5,000. So, we need to adjust the depreciation expense for the remaining useful life.
Remaining Useful Life = Revised Useful Life - Number of Years Passed
Remaining Useful Life = 10 - 3.5 = 6.5 years
Adjusted Depreciation Expense per Year = (Cost of Equipment - Accumulated Depreciation - Revised Salvage Value) / Remaining Useful Life
Adjusted Depreciation Expense per Year = ($75,000 - $48,300 - $5,000) / 6.5 = $3,200
Therefore, the depreciation expense recorded on December 31, 2022, would be $3,200. To calculate the balance in Accumulated Depreciation--Equipment, we subtract this depreciation expense from the accumulated depreciation up to that point:
Balance in Accumulated Depreciation--Equipment = Accumulated Depreciation - Depreciation Expense
Balance in Accumulated Depreciation--Equipment = $48,300 - $3,200 = $45,100
Therefore, the balance in Accumulated Depreciation--Equipment after depreciation expense has been recorded on December 31, 2022, is $45,100.
Learn more about Equipment here: brainly.com/question/28269605
#SPJ11
Your organization is an chemical supplier with employees in the following jurisdictions: Manitoba Prince Edward Island Yukon
The organization is planning to implement a company-wide policy with respect to vacation leave and vacation pay that provides the same benefits to all employees, regardless of their province of employment. As the Payroll Manager, provide Cindy Xi, the Finance Manager, with the following information: Identify four specific items relating to vacation leave and vacation pay that will have to be addressed in the policy to ensure compliance with the employment/labour standards in each jurisdiction. Research the details for each of the items you have identified using the course material and the employment/labour standards website for each jurisdiction. Using the results of your research, provide your recommendations to Ms. Xi on how to address each of these items in the policy to provide the employees with the best benefit, while keeping the cost to the organization at a minimum. Explain your reasoning. Prepare your response (250 – 400 words) using correct spelling, grammar and punctuation.
To ensure compliance with employment standards, the policy should address vacation entitlement, pay percentage, accrual method, and payment method, considering employees' benefits and cost management.
As a payroll manager, the four specific items relating to vacation leave and vacation pay that will have to be addressed in the policy to ensure compliance with the employment/labour standards in each jurisdiction are as follows:Manitoba has a standard vacation entitlement of 2 weeks or 4% of gross annual wages earned during the vacation entitlement year. Employees are eligible for vacation entitlement after one year of continuous employment. The vacation pay percentage is 4% of gross wages. The vacation pay method requires that employees receive vacation pay on each paycheque or in a lump sum payment. Prince Edward Island has a standard vacation entitlement of 2 weeks or 4% of gross annual wages earned during the vacation entitlement year. Employees are eligible for vacation entitlement after one year of continuous employment. The vacation pay percentage is 4% of gross wages. The vacation pay method requires that employees receive vacation pay on each paycheque or in a lump sum payment.Yukon has a standard vacation entitlement of 2 weeks or 4% of gross annual wages earned during the vacation entitlement year. Employees are eligible for vacation entitlement after one year of continuous employment. The vacation pay percentage is 4% of gross wages. The vacation pay method requires that employees receive vacation pay on each paycheque or in a lump sum payment.To ensure compliance with employment/labour standards in each jurisdiction, the policy must address the specificities of the vacation entitlement, vacation pay percentage, vacation accrual method, and vacation pay method. This will ensure that employees are provided with the best benefits while keeping the cost to the organization at a minimum. For instance, if the organization decides to go with the lump sum payment method of vacation pay, it may impact the employees’ financial planning, and thus, it may be better to provide the vacation pay on each paycheque instead. This will ensure that the employees are receiving regular income and also help the organization to manage the cost of the benefit more efficiently.For more questions on cost management
https://brainly.com/question/31450250
#SPJ8
(Present value of an annuity due) Determine the present value of an annuity due of $7,000 per year for 25 years discounted back to the present at an annual rate of 14 percent. What would be the present value of this annuity due if it were discounted at an annual rate of 19 percent?
a. If the annual discount rate is 14 percent, the present value of the annuity due is $___(Round to the nearest cent.)
b. If the annual discount rate is 19 percent, the present value of the annuity due is $___(Round to the nearest cent.)
If the annual discount rate is 19 percent, the present value of the annuity due is approximately **$36,510.60** (rounded to the nearest cent).
a. To calculate the present value of an annuity due at a discount rate of 14 percent, we can use the formula:
Present Value = Payment × [(1 - (1 + r)^(-n)) / r]
Where:
Payment = $7,000 (annual payment)
r = 0.14 (discount rate)
n = 25 (number of years)
Plugging in the values, we have:
Present Value = $7,000 × [(1 - (1 + 0.14)^(-25)) / 0.14]
Present Value ≈ $7,000 × [(1 - 0.0478) / 0.14]
Present Value ≈ $7,000 × (0.9522 / 0.14)
Present Value ≈ $7,000 × 6.8015
Present Value ≈ $47,611.50
Therefore, if the annual discount rate is 14 percent, the present value of the annuity due is approximately **$47,611.50** (rounded to the nearest cent).
b. To calculate the present value of the annuity due at a discount rate of 19 percent, we use the same formula:
Present Value = Payment × [(1 - (1 + r)^(-n)) / r]
Using the new discount rate of 19 percent:
Present Value = $7,000 × [(1 - (1 + 0.19)^(-25)) / 0.19]
Present Value ≈ $7,000 × [(1 - 0.0093) / 0.19]
Present Value ≈ $7,000 × (0.9907 / 0.19)
Present Value ≈ $7,000 × 5.2158
Present Value ≈ $36,510.60
Therefore, if the annual discount rate is 19 percent, the present value of the annuity due is approximately **$36,510.60** (rounded to the nearest cent).
learn more about "discount ":- https://brainly.com/question/7459025
#SPJ11
ralston has the following budgeted costs at its anticipated production level (expressed in hours): variable overhead, $174,000; fixed overhead, $329,000. if ralston now revises its anticipated production slightly upward, it would expect:
When Ralston revises its anticipated production level upward, variable overhead costs will increase proportionately while fixed overhead costs remain constant.
It can expect the variable overhead to increase proportionately and the fixed overhead to remain constant. This is because variable costs vary directly with the volume of production. On the other hand, fixed costs remain constant irrespective of the volume of production.
Therefore, the expected change in the budgeted costs when Ralston revises its anticipated production level upwards is that the variable overhead will increase proportionately and the fixed overhead will remain constant. Variable overhead costs refer to all production costs except for direct materials and direct labor.
These costs are indirect costs that are not directly linked to a product or production run. As such, they are not traceable to a particular product. Examples of variable overhead costs include indirect materials, indirect labor, utilities, and maintenance.
Fixed overhead costs refer to all costs that do not change even when production changes. They are fixed costs that do not fluctuate with changes in production. Examples of fixed overhead costs include rent, salaries, property taxes, and depreciation on equipment.
To learn more about production level
https://brainly.com/question/32515929
#SPJ11
In your opinion, will Alibaba become the largest e-commerce
company in the next five years and provide your reason to support
your opinion.
Alibaba has the potential to become the largest e-commerce company in the next five years. The company has already established itself as a dominant player in the Chinese market and is expanding rapidly into other parts of the world.
What gives Alibaba an edge over its competitors is its ability to cater to both individual consumers and businesses. It has developed an ecosystem of services and platforms that provide a complete range of solutions for buyers and sellers alike. This includes online marketplaces like Taobao and Tmall, payment services like Alipay, cloud computing services, logistics and supply chain management, and digital marketing tools.The company is also investing heavily in research and development, particularly in the areas of artificial intelligence, cloud computing, and big data analytics.
These technologies will enable Alibaba to create more personalized and efficient services for its customers and enhance its competitive position in the market. Overall, Alibaba's strong market position, broad range of services, and commitment to innovation make it a strong contender for becoming the largest e-commerce company in the next five years. However, this will also depend on how the company navigates regulatory challenges, competition from other players, and changes in consumer behavior and preferences.
Learn more about e-commerce company
https://brainly.com/question/31872131
#SPJ11
Which of the following statements about cloud computing is incorrect? Software-a5-a-Service (Sa:S) is the lowest layer in cloud computing. The cloud provider in Infrastructure-as-a-Service (laaS) model ensures the underlying cloud infrastructure is always available. Cloud computing is the use of the internet to access applications, data, or services that are stored or run on a remote server. In a Platform-as-a-Service (PaaS) model, the cloud provider is responsible for providing a complete managed platform, for user's application to run.
Previous question
Next question
The incorrect statement about cloud computing is: "Software-as-a-Service (SaaS) is the lowest layer in cloud computing."
In cloud computing, the lowest layer is typically Infrastructure-as-a-Service (IaaS), which provides the foundational infrastructure resources such as servers, storage, and networking.
Software-as-a-Service (SaaS) is a higher layer in the cloud computing stack, where software applications are delivered over the internet on a subscription basis. SaaS allows users to access and use software applications without the need for local installation or management.
Therefore, the statement that SaaS is the lowest layer in cloud computing is incorrect.
To know more about cloud computing , visit;
https://brainly.com/question/30122755
#SPJ11
There are only two first in the MMORPG Industry. One is called SWORD and the other called YGGDRASIL. Both of them have marginal costs equal to zero. The MMORPG industry faces the inverse demand curve P(Y) = 100-Y.
In this equation, let's say that y₁ + y₂ = Y is the total output.
Question: SWORD and YGGDRASIL behaves as a competitor as in the Cournot competition. Show the calculation of the Cournot equilibrium value output for SWORD and YGGDRASIL.
The Cournot equilibrium value output for SWORD is y₁ = 33.33 and for YGGDRASIL is y₂ = 33.33.
In the Cournot competition, SWORD and YGGDRASIL behave as competitors. The calculation of the Cournot equilibrium value output for SWORD and YGGDRASIL are shown below
Given,The marginal cost of both SWORD and YGGDRASIL is equal to zero.The inverse demand curve is P(Y) = 100-Y.The total output is y₁ + y₂ = Y.
To find: Calculation of the Cournot equilibrium value output for SWORD and YGGDRASILSolution:
Given the inverse demand curve, P(Y) = 100 - YThe total output, Y is shared between the two producers, SWORD and YGGDRASIL as y₁ and y₂, respectively.
Given that y₁ + y₂ = Y
The revenue of SWORD is given as R₁ = P(Y) * y₁R₁ = (100 - y₁ - y₂) * y₁R₁ = 100y₁ - y₁² - y₁y₂
Similarly, the revenue of YGGDRASIL is given as R₂ = P(Y) * y₂R₂ = (100 - y₁ - y₂) * y₂R₂ = 100y₂ - y₁y₂ - y₂²
Total revenue for both companies is given asR = R₁ + R₂R = 100y₁ + 100y₂ - y₁² - y₁y₂ - y₂²
The marginal cost of production is zero, hence MC₁ = MC₂ = 0At equilibrium, the companies will maximize their profit by taking the first derivative of the total revenue function with respect to their output and equating it to zero.
So, dR₁/dy₁ = 100 - 2y₁ - y₂ = 0and, dR₂/dy₂ = 100 - y₁ - 2y₂ = 0
solving both equations for y₁ and y₂, we get;y₁ = 50 - 0.5y₂and, y₂ = 50 - 0.5y₁
Substituting the value of y₂ in the equation for y₁, we get;y₁ = 50 - 0.5(50 - 0.5y₁)y₁ = 25.0y₁ = 50 - 0.5y₁0.5y₁ = 50 - 25y₁ = 50/1.5y₁ = 33.33
Similarly, substituting the value of y₁ in the equation for y₂, we get;y₂ = 50 - 0.5(33.33)y₂ = 33.33
Therefore, the Cournot equilibrium value output for SWORD is y₁ = 33.33 and for YGGDRASIL is y₂ = 33.33.
Know more about equilibrium here
brainly.com/question/16199625#
#SPJ11