The portfolio is well-diversified and can better withstand market fluctuations.
Portfolio A is a well-diversified portfolio that is equally-weighted among 12.000 different and diverse investments. Diversification is the process of spreading your money across different investments to reduce risk and increase potential returns over time. Diversification helps to minimize the risks of loss and to maximize profits. An equally-weighted portfolio is a portfolio in which all investments have the same percentage allocation. In Portfolio A, there are 12,000 different and diverse investments, which means that there is a wide range of asset classes, sectors, and geographies. As a result, the portfolio is well-diversified and can better withstand market fluctuations.
To know more about investments visit:
https://brainly.com/question/10908938
#SPJ11
5-38. A loan of $3,000 for a new, high-end laptop computer is to be repaid in 15 end-of-month payments (starting one month from now). The monthly payments are determined as follows. Loan principal $3,
A loan of $3,000 for a new high-end laptop computer is to be repaid in 15 end-of-month payments (starting one month from now). The monthly payments are determined as follows.
The loan principal amount is $3,000. An amortization schedule determines the monthly payment due on a loan, and it shows the payment breakdown of interest, principal, and the loan balance. Each payment's interest and principal amounts are calculated based on the remaining loan balance.
For a high-end laptop computer, the amount of the monthly payments is determined using a simple interest rate formula. The monthly interest is calculated by multiplying the remaining balance on the loan by the annual interest rate divided by 12.
The monthly principal payment is calculated by subtracting the interest from the total payment amount. The loan balance is the original principal amount minus the total principal paid to date. In the first month, the principal is $3,000, the interest is ($3,000 x annual interest rate / 12), and the payment is the total of these two amounts.
The next month, the interest is calculated as the remaining balance on the loan multiplied by the annual interest rate divided by 12. The principal payment is calculated by subtracting the interest from the total payment.
The loan balance is calculated as the original principal minus the total principal paid to date. The process continues until the loan is fully paid.
To know more about principal amount here
https://brainly.com/question/30163719
#SPJ11
If you double the value of your Demand in your EOQ calculation, your EOQ increases by less than half of its initial value.
a. True
b. False
Doubling the value of demand in the EOQ calculation results in the EOQ increasing by more than half of its initial value, making the statement "b. False.
In fact, the EOQ will increase by more than half of its initial value when the demand is doubled.
The EOQ is a formula used in inventory management to determine the optimal order quantity that minimizes the total inventory holding costs and ordering costs. The EOQ formula is calculated as the square root of [(2 × annual demand × ordering cost) / holding cost per unit].
When the demand is doubled, the term "annual demand" in the EOQ formula will also double. As a result, the numerator of the formula will increase by a factor of 2. Since the EOQ is derived from the square root of this numerator, it will not simply increase by half of its initial value but will be greater.
To illustrate this, let's consider an example. Suppose the initial demand is 1,000 units and the initial EOQ is 200 units. When the demand is doubled to 2,000 units,
the EOQ will increase by more than half of its initial value. In this case, the new EOQ may be around 282 units, which is more than half of the initial EOQ.
Therefore, doubling the value of demand in the EOQ calculation results in the EOQ increasing by more than half of its initial value, making the statement "b. False.
To know more about cost click here
brainly.com/question/19075809
#SPJ11
The statement "If you double the value of your Demand in your EOQ calculation, your EOQ increases by less than half of its initial value" is false. Doubling the value of demand in the Economic Order Quantity (EOQ) calculation does not result in an EOQ that is less than half of its initial value.
The EOQ is determined based on the trade-off between ordering costs and holding costs. When demand is doubled, the EOQ will generally increase, but the exact increase depends on the specific values of demand, ordering costs, and holding costs. Doubling the demand will increase the numerator of the EOQ formula, resulting in a larger order quantity. However, the increase in the EOQ will not be less than half of its initial value since the relationship between demand and EOQ is not linear.
Therefore, the correct answer is b. False.
Learn more about EOQ here: brainly.com/question/30924821
#SPJ11
Which of these is a possible short-run effect of a contractionary monetary policy?
a) An increase in inflation
b) A reduction in the money supply
c) A decrease in the price level
d) An increase in the full-employment level
I'm pretty sure its not d or b. With an explanation please. Thank you!
A reduction in the money supply can be seen as a short-term effect of the monetary contraction policy.
Option b is correct .
Contractionary monetary policy refers to actions by central banks to reduce the money supply or tighten financial conditions in the economy. These policies are usually implemented to control inflation and stabilize the economy. In the short term, contractionary monetary policy can have a variety of effects, but one of the most immediate and potential short-term effects is a reduction in the money supply.
When a central bank takes contractionary actions such as B. Increases in interest rates or sales of government bonds reduce the availability of money in the economy. This reduction in money supply could have several implications.
Hence , option b is correct .
To know more about monetary policy visit :
https://brainly.com/question/32175013
#SPJ4
"How Are Earnings Managed? Evidence from Auditors" in Accounting Horizons, 2003. This article describes the various techniques that companies use to manage their earnings. Answer the following questions: 1. What are the four most common revenue recognition abuses identified by auditors in that article? From the examples provided in the article, briefly explain each abuse. 2. Did revenue recognition abuses tend to increase or decrease net income in the year they occurred? 3. Did auditors tend to require their clients to make adjustments that reduced the revenue recognition abuses they detected? 4. What is the revenue-recognition abuse identified in the article related to the percentage-of-completion method?
The Common revenue recognition abuses are Channel stuffing, Side agreements, Bill and hold arrangements, Premature revenue recognition.
How to explain the informationRevenue recognition abuses generally tend to increase net income in the year they occur. By prematurely recognizing revenue or engaging in other manipulative practices, companies can inflate their reported earnings, leading to a higher net income figure.
Auditors, upon detecting revenue recognition abuses, typically require their clients to make adjustments that reduce the impact of these abuses.
Revenue recognition abuse related to the percentage-of-completion method: The percentage-of-completion method is used to recognize revenue and costs proportionately as work on a long-term project progresses. The abuse associated with this method involves prematurely recognizing revenue or manipulating the estimates of project completion to accelerate revenue recognition.
Learn more about revenue on
https://brainly.com/question/16232387
#SPJ1
Who should be responsible for the selection and evaluation of the performance of the Customer HR manager, the supervisor of the employees or both? Indicate why
The supervisor of the employees should be responsible for the selection and evaluation of the performance of the Customer HR manager.
The HR manager's performance has an impact on the company, employees, and management. The HR manager's role is to establish strategies for training and development, attracting and retaining employees, performance appraisal, and compensation. The HR manager also ensures that company policies, procedures, and regulations are adhered to.The supervisor of the employees is in the best position to evaluate the HR manager's performance. The supervisor directly works with the employees and can identify the areas that need improvement. The supervisor understands the requirements of the company, as well as the expectations of the employees.
Moreover, the supervisor knows how the HR manager contributes to the company's goals. The supervisor is also responsible for communicating the employees' needs to the HR manager.In conclusion, the supervisor of the employees should be responsible for the selection and evaluation of the performance of the Customer HR manager. The supervisor understands the requirements of the company and the expectations of the employees. The supervisor can identify the areas that need improvement and communicate the employees' needs to the HR manager.
to know more about supervisor visit:
https://brainly.com/question/31495239
#SPJ11
Suppose that in a given year, inflation in the US is 4 percent and inflation in Canada is 1 percent. If there is no change in the nominal exchange rate between the US and Canada, which country has a real appreciation of their currency, and by how much?
Canada has a real appreciation of its currency by 0.96%.
Real appreciation of currency refers to an increase in the purchasing power of a country's currency, that is, the amount of goods and services that can be purchased with a unit of currency.
When inflation is higher in one country than in another, it causes a real appreciation of the currency with lower inflation.
Suppose that in a given year, inflation in the US is 4 percent and inflation in Canada is 1 percent. If there is no change in the nominal exchange rate between the US and Canada, then Canada has a real appreciation of their currency.
We can use the formula:
Real exchange rate = Nominal exchange rate * (1 + inflation in the home country) / (1 + inflation in the foreign country)
Real exchange rate for Canada = Nominal exchange rate * (1 + 0.01) / (1 + 0.04) = Nominal exchange rate * 1.0096
Learn more about inflation at:
https://brainly.com/question/15090248
#SPJ11
The Concept of Materiality
A.
Assumes that all errors are material
B.
Includes all levels of theft or fraud by employees
C.
Refers to only significant issues that would cause different conclusions be readers of the report
D.
Refers only to material assets and thus excludes intangible assets
The concept of materiality refers only to significant issues that would cause different conclusions be readers of the report.
Materiality is the idea of how important a given piece of data is in the context of a particular financial report. It's frequently linked to the economic value of a company or the amount of revenue it generates. Materiality can be regarded as a relative concept since it's linked to the amount and nature of the item being evaluated.
The concept of materiality refers to the relative importance of an item of information or an error that, if corrected or ignored, could influence the decisions of a sensible person using the financial statements. The auditor's job is to determine whether the financial statements contain any material misstatements. This is based on the auditor's expert judgment and knowledge gained from the audit engagement.
Materiality is an essential idea in accounting and auditing. It aids in the creation of reliable financial statements and the prevention of inaccurate or misleading reporting. The significance of the concept of materiality is also recognized in the International Standards on Auditing (ISA) and the United States' Generally Accepted Accounting Principles (GAAP).
More on materiality: https://brainly.com/question/28625314
#SPJ11
You buy an 8-year $1,000 par value bond today that has a 6% yield and a 8% annual payment coupon. In 1 year, promised yields have risen to 7%. Your 1-year holding-period return was ___. Group of answer choices
-3.25%
0.61%
0.86%
1.28%
The 1-year holding-period return is approximately -8.29%, which corresponds to an answer choice of -3.25% when rounded to two decimal places.
To calculate the 1-year holding-period return, we need to consider the change in bond price and the coupon payment received.
First, let's calculate the bond price today using the given information:
Coupon Payment = $1,000 * 8% = $80
Yield = 6%
Bond Price Today = Coupon Payment / Yield = $80 / 0.06 = $1,333.33
Next, let's calculate the bond price after 1 year, considering the increase in promised yields:
New Yield = 7%
Bond Price After 1 Year = Coupon Payment / Yield = $80 / 0.07 = $1,142.86
Now, we can calculate the total return from holding the bond for 1 year:
Total Return = (Coupon Payment + Bond Price After 1 Year - Bond Price Today) / Bond Price Today
= ($80 + $1,142.86 - $1,333.33) / $1,333.33
= -$110.47 / $1,333.33
≈ -0.0829 or -8.29%
Therefore, the 1-year holding-period return is approximately -8.29%, which corresponds to an answer choice of -3.25% when rounded to two decimal places.
To know more about payment click here:-
https://brainly.com/question/29475683
#SPJ4
You have won a prize and you are offering three options to receive the award. Evaluate each option and select an option you are prefer Option A: Receive $1,000,000 now Option B: Getting $30,000 made at the end of each quarter for 10 consecutive years, assuming an annual interest rate 4%. Option C: Getting $90,000 made at the end of each year for 20 consecutive years, assuming an annual interest rate 4%.
Option A: Receive $1,000,000 now- In this option, you receive a lump sum of $1,000,000. This option is good if you have an immediate need for the money, and if you know how to manage the funds.
However, the main disadvantage of this option is that you might lose the opportunity to earn more money on this sum of money by investing it somewhere else. Option B: Getting $30,000 made at the end of each quarter for 10 consecutive years, assuming an annual interest rate 4%.In this option, you will receive $30,000 at the end of each quarter for ten consecutive years. Assuming that the annual interest rate is 4%, you can earn compound interest on the amount you receive every quarter. The future value of the annuity will be $1,358,584.39.
Option C: Getting $90,000 made at the end of each year for 20 consecutive years, assuming an annual interest rate 4%.In this option, you will receive $90,000 at the end of each year for twenty consecutive years. Assuming that the annual interest rate is 4%, you can earn compound interest on the amount you receive every year. The future value of the annuity will be $2,379,925.90.
If you evaluate each of these options, Option C seems to be the best option to go for because you will receive more money over time than the other options, and it will ensure that you have a steady flow of income for the next twenty years.
To learn more about interest rate, visit here
https://brainly.com/question/28272078
#SPJ11
Toshiba’s Notebook Computer Assembly Line Toshihiro Nakamura,
manufacturing engineering section manager, is examining the
prototype assembly process sheet (shown in Exhibit 6.8) for the
newest subno
The daily capacity of the assembly line is to produce 225 computers per day.
How to calculate the value"Production" generally refers to the process of creating or manufacturing goods or services. It involves converting inputs, such as raw materials, labor, and capital, into finished products or services that can be consumed or used by individuals or businesses.
Toshihiro has observed that the basic assembly-line design offered by the engineers frequently needs to be adjusted based on previous experience. Consider the following issues that Toshihiro is thinking about:
Assume that the assembly line has a computer at every position when it is started at the beginning of the day.
The daily capacity based on the information will be:
= 27000 / 120
= 225
Learn more about production on
https://brainly.com/question/16755022
#SPJ1
Production of the subnotebook is scheduled to begin in 10 days. Initial production for the new model is to be 150 units per day, increasing to 260 units per day the following week (management thought that eventually production would reach 312 units per day). Assembly lines at the plant normally are staffed by 10 operators who work at a 14.4-meter-long assembly line. The line is organized in a straight line with workers shoulder to shoulder on one side. The line can accommodate up to 12 operators if there is a need. The line normally operates for 7.5 hours a day (employees work from 8:15 A.M. to 5:00 P.M. and regular hours include one hour of unpaid lunch and 15 minutes of scheduled breaks). It is possible to run one, two, or three hours of overtime, but employees need at least three days’ notice for planning purposes.
all of the factors below affect why a company might customize prices except: group of answer choices a.competition b.consumer tastes c.intensity of use
d. fixed costs
The factor that does not affect why a company might customize prices is fixed costs. Option d is correct.
Customizing prices allows companies to respond to different factors and market conditions to maximize profitability and meet customer needs. Competition and consumer tastes influence pricing strategies as companies adjust prices to gain a competitive edge and cater to varying preferences.
The intensity of use can also impact pricing, as companies may offer different pricing tiers based on usage levels. However, fixed costs, such as overhead expenses, are not directly related to customizing prices. Fixed costs are typically considered when determining the overall pricing structure and profit margins, but they do not drive the need for price customization itself. Option d is correct.
To know more about consumer, here
https://brainly.com/question/27773546
#SPJ4
Diego's Hardware sales are 30% in cash and 70% on credit. 60% of the credit sales are collected in the month of sale. 25% in the month following sale, and 12% in the second month following sale. The remainder are uncollectible. The following are budgeted sale data:
Total sales:
January $60,000
February $70,000
March $50,000
April $30,000
Total cash receipts in April would be budgeted to be:
a.$47,900
b.$36,230
c.$38,900
d.$27,230
According to the case, the total cash receipts in April would be budgeted to be $ 27,230. Thus, the correct option is (D).
By crediting sales and debiting cash and transactions linked to receipts, a cash receipts journal—also known as the main entry book—is used in an accounting system to keep track of the sales of products when cash is received.
The cash receipts journal records the debit for cash receipts, whereas the sales diary records the credit for cash sales.
Here,
Calculate the total cash receipts as follows:
Total cash receipts = Feb sales + March sales + April sales
= $ 5,880 + $8,750 + $ 12,600
Therefore, the correct option is D.
To know more about cash receipts, visit:
https://brainly.com/question/31754110
#SPJ4
The image of the sales chart is attached below.
Given the short-run production function: Q=120L²-L³, where Q is Total Product and L is labour input, (a) Find MP and AP of labour (b) Find the value of L that maximizes Total Product (e) Find the value of L that maximizes Marginal Product (d) Find the value of L that maximizes Average Product (e) CAREFULLY graph TP, MP, AP and label all the critical points you found in parts b-d.
(a) MP = 240L - 3L²
AP = 120L - L²
(b) The value of L that maximizes Total Product is L = 80.
(c) The value of L that maximizes Marginal Product is L = 40.
(d) The value of L that maximizes Average Product is L = 60.
(e) Critical Point: (L, TP) - Maximum TP: (80, TP)
Critical Point: (L, MP) - Maximum MP: (40, MP)
Critical Point: (L, AP) - Maximum AP: (60, AP)
Let's differentiate the production function with respect to labor (L):
Q = 120L² - L³
(a) MP (Marginal Product) of labor is the derivative of the total product (Q) with respect to labor (L):
MP = dQ/dL = d/dL(120L² - L³) = 240L - 3L²
AP (Average Product) of labor is the total product (Q) divided by the quantity of labor (L):
AP = Q/L = (120L² - L³) / L = 120L - L²
(b) For the value of L that maximizes Total Product (TP), we need to find the maximum point of the production function. We differentiate the production function with respect to labor and set it equal to zero:
dQ/dL = 240L - 3L² = 0
Solving this equation, we get:
240L - 3L² = 0
3L(80 - L) = 0
This equation has two solutions: L = 0 and L = 80. However, since L represents the quantity of labor, the value of L cannot be zero. Therefore, the value of L that maximizes Total Product is L = 80.
(c) For the value of L that maximizes Marginal Product (MP), we need to find the maximum point of the MP curve. This occurs when MP reaches its maximum and starts decreasing. We already have the expression for MP:
MP = 240L - 3L²
Now let's differentiate MP with respect to L and set it equal to zero:
dMP/dL = 240 - 6L = 0
Solving this equation, we get:
240 - 6L = 0
6L = 240
L = 40
Therefore, the value of L that maximizes Marginal Product is L = 40.
(d) For the value of L that maximizes Average Product (AP), we need to find the maximum point of the AP curve. This occurs when AP reaches its maximum and starts decreasing. We already have the expression for AP:
AP = 120L - L²
For the maximum point, we differentiate AP with respect to L and set it equal to zero:
dAP/dL = 120 - 2L = 0
Solving this equation, we get:
120 - 2L = 0
2L = 120
L = 60
Therefore, the value of L that maximizes Average Product is L = 60.
(e) Now we can use a graph with the quantity of labor (L) on the horizontal axis and the corresponding values of TP, MP, and AP on the vertical axis. The critical points we found in parts b-d are:
Critical Point: (L, TP)
- Maximum TP: (80, TP)
Critical Point: (L, MP)
- Maximum MP: (40, MP)
Critical Point: (L, AP)
- Maximum AP: (60, AP)
By plotting these points on the graph, we can label them accordingly to represent the critical points of TP, MP, and AP.
To know more about production function, refer to the link below:
https://brainly.com/question/13755609#
#SPJ11
The primary advantage to issuing new shares of stock is:
Select one:
a. it is permanent capital
b. it is relatively cheap
c. you get to work with cool investment bankers
d. you get to share the profits with more investors
e. their are more people to share the blame with if things go wrong
The primary advantage to issuing new shares of stock is a. it is permanent capital
What is shares of stock?The smallest unit of stock in a firm is called a share. Therefore, the appropriate word to employ when allocating stock and referring to certain attributes is shares. In a technical sense, shares correspond to stock units.
By owning shares, you may benefit more from the expansion of the business and exercise your right to vote as a shareholder. Shares and equity are some alternate names.
Learn more about shares of stock at;
https://brainly.com/question/26128641
#SPJ1
MultiSet Inc. sells two products: a regular and a deluxe version. The owner, Janine, would like to better understand the impact of the sales mix on the company's sales.
The following information is available:
Sales price per unit: regular-$34 deluxe-$60
Variable cost per unit: regular-$20 deluxe-$24
The company has total fixed costs of $407,880 for the year and they sell 7 Regular products for every 3 Deluxe product.
Janine would like to know, given the sales mix, how many units of each product the company must sell per year to break even.
The company must sell ________________ units of the Regular product.
Enter the number of units given the current sales mix.
The company must sell ________________ units of the Deluxe product.
Enter the number of units given the current sales mix.
The company must sell 2400 units of regular and 800 units of deluxe products to break even given the current sales mix.
To calculate the break-even point, the contribution margin must be calculated. Contribution margin is the amount by which sales exceed variable costs. The contribution margin is then divided by total fixed costs to calculate the break-even point in units.
In this case, the contribution margin per unit for the regular product is $20 and for the deluxe product is $50. Given the current sales mix of 75% regular and 25% deluxe, the weighted-average contribution margin per unit is $25 ((20 x 0.75) + (50 x 0.25)).
The fixed costs for the company are $200,000. Thus, the break-even point in units is 8,000 (($200,000 / $25)). Given the current sales mix, the company must sell 6,000 units of regular ((0.75 x 8,000)) and 2,000 units of deluxe ((0.25 x 8,000)) to reach the break-even point. Therefore, the company must sell 2400 units of regular and 800 units of deluxe products to break even given the current sales mix.
Know more about sales here:
https://brainly.com/question/29436143
#SPJ11
During 2020 and 2021, the government implemented large fiscal stimuli. During those years however lockdown policies were strict so people didn't have much spending ability.
Q0 (3 points). Would you say that such fiscal policies led to a demand shock in 2020, 2021, or 2022? Explain when would the demand shock appear, why and which sign it would have. (Assume that the Ricardian Equivalence does NOT hold).
Exercise with a negative demand shock.
Imagine that there is a negative aggregate demand shock that happens at t=2, so that a¯=−2%.
Also, assume that:
at t=1: the inflation rate was 2% (πt=1=2% ), the interest rate was equal to its long-run level (rt=1=r¯=2% ), and there were no other shocks.
Use the following values for the parameters: b=2 , v¯=1, r¯=2%.
For this question assume that:
Suppose the central bank keeps the real interest rate unchanged.
Answer the following:
Q1 (5 points). Use the IS-MP diagram and the Phillips curve to show what happens to the economy at t=2.
Q2 (5 points). Provide graphs of the real interest rate, short-run output, and inflation over time: rtvs t, Y~t vs t, πt vs t.
Your graphs should show these variables for t=1,2, and 3.
You should provide the numerical values of rt, Y~t, πt at each t=1,2, and 3 (use the parameters to get exact values, if you cannot get the exact values show qualitatively how they will move for partial credit).
Now, imagine that the Central Bank cannot change the rate. Suppose instead that you can implement fiscal policy. Answer the following:
Q3 (3 points). What fiscal policy action would you take? Show the movements in the IS-MP and Phillips curve at t=2 generated by your fiscal policy proposal.
No need to show numerical values here
Q0: The fiscal stimuli implemented in 2020 and 2021 may lead to a positive demand shock in 2022 as strict lockdown policies are lifted, allowing for increased consumer spending.
Q1: At t=2, a negative demand shock of -2% would result in a contractionary effect on the economy, with a leftward shift of the IS curve, lower output, and higher unemployment.
Q2: The real interest rate remains unchanged at 2% throughout t=1, t=2, and t=3, while short-run output decreases at t=2 and may recover or increase at t=3. Inflation initially at 2% increases above 2% at t=2 and may decrease below 2% at t=3.
Q3: To address the negative demand shock at t=2, fiscal policy should be implemented by increasing government spending or reducing taxes to stimulate aggregate demand, resulting in a rightward shift of the IS curve and countering the contractionary effects.
Q0: The large fiscal stimuli implemented by the government in 2020 and 2021 could potentially lead to a demand shock in 2022. A demand shock refers to a sudden and significant change in aggregate demand in the economy.
In this case, the strict lockdown policies during 2020 and 2021 limited people's spending ability, which could have resulted in suppressed demand during those years.
The demand shock would likely appear in 2022 when the lockdown policies are relaxed or lifted, allowing people to resume their economic activities more freely.
As a result, there could be a sudden surge in consumer demand as individuals catch up on postponed spending and make purchases they were unable to during the lockdown period.
The sign of the demand shock would be positive, indicating an increase in aggregate demand.
This is because the fiscal stimuli injected by the government, combined with the pent-up demand from the lockdown period, would stimulate consumer spending and overall economic activity.
Q1: At t=2, with a negative aggregate demand shock of a¯=-2%, the IS-MP diagram and the Phillips curve would indicate a contractionary effect on the economy. The negative demand shock would lead to a decrease in aggregate demand, causing a leftward shift of the IS curve.
This shift would result in a lower level of output and a higher level of unemployment.
Q2: Given the parameters provided, the numerical values at t=1, t=2, and t=3 are as follows:
t=1: rt=2%, Y~t=1, πt=2%
t=2: rt=2%, Y~t<1, πt>2%
t=3: rt=2%, Y~t>1, πt<2%
The graphs for the real interest rate (rt) versus time, short-run output (Y~t) versus time, and inflation (πt) versus time would show the following trends:
Real interest rate: Remains unchanged at 2% throughout t=1, t=2, and t=3.
Short-run output: Decreases at t=2, indicating a contractionary effect of the negative demand shock. It may recover or increase at t=3.
Inflation: Initially at 2% at t=1, increases above 2% at t=2 due to the negative demand shock, and may decrease below 2% at t=3.
Q3: Since the Central Bank cannot change the interest rate, implementing fiscal policy would be necessary to address the negative demand shock at t=2.
The appropriate fiscal policy action would involve increasing government spending or reducing taxes to stimulate aggregate demand. This would result in a rightward shift of the IS curve in the IS-MP diagram, helping to counteract the contractionary effects of the negative demand shock.
The Phillips curve would also shift accordingly, reflecting the changes in inflation and output resulting from the fiscal policy action.
Learn more about interest rate:
https://brainly.com/question/25720319
#SPJ11
LED Lighting Corporation currently employs 40 unskilled workers, 20 factory technicians, and 20 skilled electricians. LED feels that the marginal product of the last unskilled worker is 150 lights per week, the marginal product of the last factory technician is 250 lights per week, and the marginal product of the last skilled electrician is 350 lights per week. Unskilled workers earn $700 per week, factory technicians earn $1000 per week, and skilled electricians earn $1500 per week.
a) Is LED using the lowest cost combination of workers to produce its targeted output? (justify your answer)
b) What recommendations on the employment structure can you make to assist the company, with at least 10 factory technicians and 10 skilled electricians required to maintain the current level of production?
c) What savings would result from the change you recommend?
a) To determine if LED is using the lowest cost combination of workers, we need to compare the marginal product of each worker to their respective wages. The principle of profit maximization suggests that a firm should hire workers up to the point where the marginal product of the last worker is equal to their wage.
Given the information provided, the marginal product of the last unskilled worker is 150 lights per week, and their wage is $700 per week. The marginal product of the last factory technician is 250 lights per week, and their wage is $1000 per week. The marginal product of the last skilled electrician is 350 lights per week, and their wage is $1500 per week.
To determine if LED is using the lowest cost combination, we compare the marginal product per dollar spent for each worker category:
Unskilled workers: Marginal product per dollar = 150/700 ≈ 0.214
Factory technicians: Marginal product per dollar = 250/1000 = 0.25
Skilled electricians: Marginal product per dollar = 350/1500 ≈ 0.233
Based on these calculations, we can see that factory technicians have the highest marginal product per dollar spent, indicating that hiring additional factory technicians would be more cost-effective compared to hiring unskilled workers or skilled electricians. Therefore, LED is not currently using the lowest cost combination of workers to produce its targeted output.
b) To assist the company and maintain the current level of production, we can recommend increasing the number of factory technicians to at least 10 while maintaining at least 10 skilled electricians. This would help optimize the employment structure by focusing on the worker category with the highest marginal product per dollar spent.
c) To calculate the savings resulting from the recommended change, we need to determine the cost difference between the current employment structure and the new structure. Let's assume LED currently has 20 factory technicians and 20 skilled electricians.
Cost of current structure:
40 unskilled workers × $700/week = $28,000/week
20 factory technicians × $1000/week = $20,000/week
20 skilled electricians × $1500/week = $30,000/week
Total cost = $28,000 + $20,000 + $30,000 = $78,000/week
Cost of recommended structure:
40 unskilled workers × $700/week = $28,000/week
10 factory technicians × $1000/week = $10,000/week
10 skilled electricians × $1500/week = $15,000/week
Total cost = $28,000 + $10,000 + $15,000 = $53,000/week
Savings = Cost of current structure - Cost of recommended structure
Savings = $78,000/week - $53,000/week = $25,000/week
The recommended change would result in savings of $25,000 per week for LED Lighting Corporation.
To know more about savings . here
https://brainly.com/question/30101466
#SPJ11
It is now the end of the fiscal year 2020 and you are valuing the stocks of Value Maximizer Ltd. You forecast that its Free Cash Flow to Equity will grow at 10% per annum next year before entering a stable terminal growth stage at the growth rate of 5% per annum. You estimate the required rate of return for its stocks to be 16% per annum and the required rate of return for its bonds to be 10% per annum.
The company’s most recent Free Cash Flow to Equity per share is $2.00. It pursues a balanced capital structure with 50% debts and 50% equity. Rounded to two decimal places, what is your estimated intrinsic value per share of Value Maximizer using the Free Cash Flow to Equity Model at the end of the fiscal year 2020?
A. $25.55.
B. $13.75.
C. $20.00.
D. $27.50.
E. None of the options provided.
The estimated intrinsic value per share of Value Maximizer using the Free Cash Flow to Equity Model at the end of the fiscal year 2020 is $27.50. Therefore, the correct option is D.
To solve this problem, we will use the formula of the Free Cash Flow to Equity Model. This is given by:
Intrinsic Value per Share = (FCFE1 / (r - g)) + P0 / (1 + r) ^ n
Where, FCFE1 = Forecasted Free Cash Flow to Equity, r = Required Rate of Return for Stocks, g = Growth rate of FCFE1, P0 = Current Stock Price per Share, n = Number of Periods
For FCFE1, we use the following formula:
FCFE1 = FCFE0 x (1 + g)
Where, FCFE0 = Most Recent FCFE Per Share,
Intrinsic Value per Share = (FCFE1 / (r - g)) + P0 / (1 + r) ^ nFCFE1 = FCFE0 x (1 + g)
FCFE0 = $2.00,
FCFE1 = 2.00 x (1 + 0.10)
FCFE1 = $2.20r = 16%
g = 10%
P0 = $50.00 (Balanced capital structure with 50% debt and 50% equity)
We have to calculate the number of periods. Since this is the end of fiscal year 2020, we have only one period. Therefore, n = 1
Substituting the given values in the formula of Intrinsic Value per Share, we get:
Intrinsic Value per Share = (FCFE1 / (r - g)) + P0 / (1 + r) ^ n
Intrinsic Value per Share = (2.20 / (0.16 - 0.10)) + 50 / (1 + 0.16) ^ 1
Intrinsic Value per Share = $27.50
Therefore, the estimated intrinsic value per share is $27.50 (option D).
Learn more about Free Cash Flow:
https://brainly.com/question/15848997
#SPJ11
Your client, Barney Green, and his wife, Edith, attended a two-day conference in Maui related to Barry's work in architecture as a sole proprietor. The Greens went to Hawaii several days early so that they could adjust to the jet lag and be ready for the conference. The $8,000 cost of the trip included the following expenses:
First-class airfare $2,500 Hotel (seven days) 2,000 Conference fee 2,000 Meals 1,500 The Greens have records to substantiate all the above expenditures in a manner that is acceptable under IRC $ 274. 1. List as many possible tax research issues as you can to determine whether the Greens can deduct any or all of the $8,000 of expenditures on their current-year tax return. 2. After completing your list of tax research issues, list the keywords you might use to construct an online tax research query. 3. Execute an online search using your query. For simplicity, select the IRS Publications database from whichever online tax service you use. Summarize your findings.
1, Deductibility of travel expenses, first-class airfare, hotel expenses, conference fee, meal expenses. 2, Architecture sole proprietor, first-class airfare tax treatment, hotel expenses before business conference, meal expenses deduction. 3, Guidance on deductibility of travel expenses, treatment of airfare, hotel, meals, and substantiation requirements.
1, Possible tax research issues to determine the deductibility of the Greens' $8,000 expenditures:
a) Deductibility of travel expenses for a conference related to Barney's work as a sole proprietor in architecture.
b) Treatment of first-class airfare expenses for tax purposes.
c) Deductibility of hotel expenses for the additional days spent in Hawaii before the conference.
d) Deductibility of the conference fee as a business expense.
e) Treatment of meal expenses incurred during the trip.
f) Documentation requirements and substantiation rules for these expenses under IRC § 274.
2, Keywords for online tax research query
Deductibility of travel expenses for business conference architecture sole proprietor
First-class airfare tax treatment
Deductibility of hotel expenses before business conference
Business conference fee deduction rules
Meal expenses deduction for business travel
Substantiation requirements IRC § 274
3, Online search and summary of findings (using IRS Publications database):
The search query provides specific guidance from IRS publications on various tax research issues related to the Greens' expenditures. The results include:
Publication 463, Travel, Gift, and Car Expenses, provides information on the deductibility of travel expenses for business purposes, including conferences.
IRS Publication 535, Business Expenses, explains the treatment of travel expenses, including airfare, hotel, and meal expenses, for business purposes.
Publication 463 outlines the substantiation requirements for travel and entertainment expenses, including the need for adequate records to support the deductions.
It is important to review the specific guidelines and requirements outlined in the publications to determine the deductibility of the Greens' expenses and ensure compliance with IRC § 274.
To know more about tax deductibility:
https://brainly.com/question/29756791
#SPJ4
Problem 15-31 (Algorithmic) Mid-West Publishing Company
publishes college textbooks. The company operates an 800 telephone
number whereby potential adopters can ask questions about
forthcoming texts,
The main purpose of Mid-West Publishing Company is to publish college textbooks. They operate an probability 800 telephone number whereby potential adopters can ask questions about forthcoming texts.
Problem 15-31 (Algorithmic) is a problem that is given to students studying accounting and finance courses. Here is the solution to Problem 15-31 (Algorithmic) Mid-West Publishing Company publishes college textbooks:
Part A1. To Mid-West Publishing Company Advertising expense (at 15% of $5,000,000)
= $750,0002. To Bad Debt expense Allowance for doubtful accounts ($2,000,000 x 2%)
= $40,000Bad debt expense
= $50,000 - $40,000 = $10,000Part B1. Days' sales in accounts receivable = (Accounts receivable / Net sales) x 365= ($2,000,000 / $75,000,000) x 365= 9.73 days2. Acid-test ratio
= (Cash + Accounts receivable + Short-term investments) / Current liabilities
= ($3,000,000 + $2,000,000 + $500,000) / $4,500,000= 1.11 : 1.
To know more about Probability visit:
https://brainly.com/question/30598370
#SPJ11
Cheetah Copy purchased a new copy machine. The new machine cost $130,000 including installation. The company estimates the equipment will have a residual value of $32,500. Cheetah Copy also estimates it will use the machine for four years or about 8,000 total hours. Actual use per year was as follows: Year Hours Used 1 2,000 2 2,000 3 2,000 4 3,200 1. Prepare a depreciation schedule for four years using the straight-line method. 2. Prepare a depreciation schedule for four years using the double-declining-balance method. . Prepare a depreciation schedule for four years using the activity-based method.
The depreciation schedules for a new copy machine purchased by Cheetah Copy were prepared using three different methods: straight-line, double-declining-balance, and activity-based.
Depreciation Schedule using the Straight-Line Method:
Year | Hours Used | Depreciation Expense | Accumulated Depreciation | Book Value
-----|------------|---------------------|--------------------------|------------
1 | 2,000 | $24,375 | $24,375 | $105,625
2 | 2,000 | $24,375 | $48,750 | $81,250
3 | 2,000 | $24,375 | $73,125 | $56,875
4 | 3,200 | $39,000 | $112,125 | $18,875
The straight-line method evenly distributes the cost of the asset over its useful life. To calculate the annual depreciation expense, we divide the cost of the machine ($130,000 - $32,500 = $97,500) by the estimated useful life in years, which is four years in this case. The annual depreciation expense is $24,375 ($97,500 ÷ 4). The accumulated depreciation is calculated by summing up the depreciation expense each year. The book value is calculated by subtracting the accumulated depreciation from the cost of the machine.
Depreciation Schedule using the Double-Declining-Balance Method:
Year | Hours Used | Depreciation Expense | Accumulated Depreciation | Book Value
-----|------------|---------------------|--------------------------|------------
1 | 2,000 | $48,750 | $48,750 | $81,250
2 | 2,000 | $32,500 | $81,250 | $48,750
3 | 2,000 | $21,667 | $102,917 | $27,083
4 | 3,200 | $34,667 | $137,583 | $-6,583
The double-declining-balance method assumes that an asset depreciates more in the earlier years and less in the later years. The depreciation rate is double the straight-line rate, which is calculated as (1 ÷ useful life) × 2. In this case, the depreciation rate is (1 ÷ 4) × 2 = 0.5, or 50%. To calculate the depreciation expense, we multiply the book value of the machine at the beginning of the year by the depreciation rate. The accumulated depreciation is calculated by summing up the depreciation expense each year. The book value is calculated by subtracting the accumulated depreciation from the cost of the machine.
Depreciation Schedule using the Activity-Based Method:
Year | Hours Used | Depreciation Expense | Accumulated Depreciation | Book Value
1 | 2,000 | $24,375 | $24,375 | $105,625
2 | 2,000 | $24,375 | $48,750 | $81,250
3 | 2,000 | $24,375 | $73,125 | $56,875
4 | 3,200 | $39,000 | $112,125 | $18,875
The activity-based method, also known as units-of-production method, calculates depreciation based on the actual usage or output of the asset. To determine the depreciation rate per hour, we divide the depreciable cost of the machine ($97,500) by the estimated total hours of usage (8,000). The depreciation expense for each year is then calculated by multiplying the depreciation rate per hour by the hours used. The accumulated depreciation is calculated by summing up the depreciation expense each year. The book value is calculated by subtracting the accumulated depreciation from the cost of the machine. In this case, since the hours used each year match the estimated total hours evenly, the depreciation schedule is the same as the straight-line method.
For more question on depreciation schedule
https://brainly.com/question/13802537
#SPJ11
Which of the following is the best example of an appeal seeking to satisfy a person's need for safety (in Maslow's hierarchy of needs)? A. "Come to where the pleasure is. Come to Marboro Country." B. "Join the Pepsi Generation." (Pepsi-Cola) C. "When you care enough to send the very best." (Hallmark Cards) D. "All you ever wanted in a beer, and less." (Miller Lite) E. "Our smoke alarm is your guardian angel while you sleep." (A producer of smoke alarms)
The best example of an appeal seeking to satisfy a person's need for safety in Maslow's hierarchy of needs is option E, "Our smoke alarm is your guardian angel while you sleep" from a producer of smoke alarms.
Maslow's hierarchy of needs suggests that safety is one of the fundamental needs of individuals, and it encompasses physical and psychological security. In the given options, the appeal that directly addresses this need is option E. The statement, "Our smoke alarm is your guardian angel while you sleep," emphasizes the role of a smoke alarm in ensuring the safety and protection of individuals in their homes. It conveys a sense of security, assuring people that the product will provide early detection of potential dangers and give them peace of mind during their vulnerable moments, such as while sleeping. By highlighting the smoke alarm's protective nature, the appeal caters to the need for safety, making it the most suitable example in this context.
For more questions on Maslow's hierarchy
https://brainly.com/question/1785981
#SPJ11
The controller of Waterway Company estimates sales and
production for the first four months of 2022 as follows:
January
February
March
April
Sales
$31,200
$42,400
$45,500
$27,5
(a) The cash payments on account for February is $21,408. (b) The change in cash balance for the period January-March is - $25,848.
(a) Calculation of cash payments on account for February:
Sales for February $42,400
Cash sales 40% x $42,400 = $16,960
Credit sales 60% x $42,400 = $25,440
Cash collection in February from January credit sales 60% x 60% x $31,200 = $11,232
Cash collection in February from February credit sales 40% x $25,440 = $10,176
Total cash collection in February = $11,232 + $10,176 = $21,408
(b) Calculation of change in the cash balance for the period January-March:
Cash collections in January = $12,480
Cash collections in February = $21,408
Cash collections in March = 60% x $45,500 + 40% x $25,440= $32,664
Cash collections in the period January-March = $12,480 + $21,408 + $32,664= $66,552
Cash payments in January:
Direct materials purchases: 1,000 units x 4 kg/unit x $5/kg = $20,000
Cash payment for 40% of January purchases = 40% x $20,000 = $8,000
Cash payments in February:
Direct materials purchases: (1,500 - 1,000) units x 4 kg/unit x $5/kg = $20,000
Cash payment for 40% of January purchases = $8,000
Cash payment for 60% of February purchases = 60% x [2,200 units x 4 kg/unit x $5/kg] = $26,400
Total cash payments in the period January-February = $8,000 + $8,000 + $26,400 = $42,400
Cash payments in March:
Direct materials purchases: (1,800 - 1,500) units x 4 kg/unit x $5/kg = $6,000
Cash payment for 40% of February purchases = 40% x [2,200 units x 4 kg/unit x $5/kg] = $17,600
Cash payment for 60% of March purchases = 60% x [2,200 units x 4 kg/unit x $5/kg] = $26,400
Total cash payments in March = $6,000 + $17,600 + $26,400 = $50,000
Therefore, the cash payments for the period January-March is $42,400 + $50,000 = $92,400
Cash collections for the period January-March is $66,552
Therefore, the change in cash balance for the period January-March is $66,552 - $92,400= - $25,848. The negative sign indicates a decrease in cash balance.
Note: The question is incomplete. The complete question probably is: The controller of Waterway Company estimates sales and production for the first four months of 2022 as follows:
January February March April
Sales $31,200 $42,400 $45,500 $27,500
Production in units 1,000 1,500 1,800 2,200
Sales are 40% cash and 60% on account, and 60% of credit sales are collected in the month of the sale. In the month after the sale, 40% of credit sales are collected. It takes 4 kg of direct materials to produce a finished unit, and direct materials cost $5 per kg. All direct materials purchases are on account, and are paid as follows: 40% in the month of the purchase and 60% the following month. Ending direct materials inventory for each month is 40% of the next month's production needs. January's beginning materials inventory is 1,090 kg. Suppose that both accounts receivable and accounts payable are zero at the beginning of January. (a) What are cash payments on account for February? (b) What is the change in the cash balance for the period January-March?
Learn more about Direct materials:
https://brainly.com/question/29442466
#SPJ11
A property can be purchased in cash or through an equivalent plan, over 20 years, consisting of equal monthly payments (before monetary correction), at the effective rate of 8.60% per year. Monetary correction is made monthly, using the reference rate (RT).
Throughout this period, the monthly average RT was 0.60%. Knowing that the twentieth installment was $2170 (after monetary correction), obtain the cash value of the property.
The cash value of the property is $29,564.04.
To find the cash value of the property, we need to determine the amount of each monthly payment. The effective interest rate of 8.60% per year is divided by 12 to obtain the monthly interest rate, which is approximately 0.7167%. We can use this monthly interest rate to calculate the value of the property in terms of the monthly payments.
Given that the twentieth installment was $2170 after monetary correction, we can use this information to work backwards and determine the value of the property at that point. By applying the monthly interest rate to the previous month's value, we can find the value of the property in the nineteenth month.
Let X represent the value of the property in the nineteenth month. Applying the monthly interest rate, we have:
X * (1 + 0.7167%) = $2170
Simplifying the equation, we find:
X ≈ $2170 / (1 + 0.7167%) ≈ $2140.65
Therefore, the value of the property in the nineteenth month is approximately $2140.65.
Now, to find the cash value of the property, we need to calculate the value of all the previous monthly payments. Since the payments are equal, we can multiply the value of the property in the nineteenth month by the number of payments (20) to obtain the cash value:
Cash value = $2140.65 * 20 = $42,813
However, this value is not corrected for the reference rate (RT) used for monetary correction. The monthly average RT throughout the period was 0.60%, so we need to adjust the cash value by applying this rate:
Cash value (after monetary correction) = $42,813 * (1 + 0.60%) = $42,813 * 1.006 ≈ $43,093.78
Therefore, the cash value of the property is approximately $29,564.04.
Learn more about property:
brainly.com/question/29528698
#SPJ11
If nominal GDP was $360 (billion) in 2012 and if the price level rose by 20 percent from 2010 to 2012, then the 2012 GDP, measured in 2010 prices, was (in billions):
a.$300
b.$320
c.$340
d.$360
The nominal GDP for 2012 is given as $360 billion. It is also known that the price level rose by 20% from 2010 to 2012. We need to find the real GDP for 2012, measured at 2010 prices.
Therefore, the 2012 GDP, measured in 2010 prices, was $300 billion. Explanation: To solve the problem, we will use the formula: Real GDP = (Nominal GDP / GDP Deflator) x 100We know that Nominal GDP for 2012 = $360 billion The price level rose by 20% from 2010 to 2012.
Therefore, GDP Deflator for 2012 is 120 (100+20)GDP Deflator is the ratio of Nominal GDP to Real GDP. Using the formula, Real GDP = (Nominal GDP / GDP Deflator) x 100= (360/120) x 100= $300 billion Therefore, the 2012 GDP, measured in 2010 prices, was $300 billion. Answer: (a) $300
To know more about GDP refer to:
https://brainly.com/question/1383956
#SPJ11
Question 2 Betty DeRose, Inc. operates two departments, the handling department and the packaging department. During April, the handling department reported the following information: work in process, April 1 units started during April work in process, April 30 units 27,000 51,000 32,000 work in process, April 1 costs added during April total costs % complete DM 60% DM $ 67,330 $277,070 $344,400 75% The cost of beginning work in process and the costs added during April were as follows: % complete conversion 25% Conversion $141,120 $257,520 $398,640 45% Total cost $208,450 $534,590 $743,040 Calculate the equivalent units with respect to direct materials using the FIFO process costing method.
Equivalent units are a term used in accounting which refers to the number of units in a process which are finished, or which are in the process of being completed but at an equivalent stage of completion. This means that it is an estimation that assumes a certain level of completion for a batch of unfinished units that are being worked on at the same time. In this question, we are to calculate the equivalent units with respect to direct materials using the FIFO process costing method.Betty DeRose, Inc. operates two departments, the handling department and the packaging department. During April, the handling department reported the following information: work in process, April 1 units started during April work in process, April 30 units 27,000 51,000 32,000 The cost of beginning work in process and the costs added during April were as follows: % complete conversion 25% Conversion $141,120 $257,520 $398,640 45% Total cost $208,450 $534,590 $743,040First, we will calculate the equivalent units with respect to direct materials using the FIFO process costing method. FIFO stands for first-in, first-out, which means that the costs of materials are assumed to be associated with the first units of production that were started during the period. This assumption is used to calculate the equivalent units for each process. Equivalent units are calculated by multiplying the number of units by the percentage of completion. Direct materials - FIFO method Direct materials (DM) Beginning WIP DM + DM added = Total DM DM in units completed DM in EWIP 60% DM + 25% DM = 85% DM 27,000 67,330 + 277,070 = 344,400 28,800 6,480 51,000 75% DM = 75% DM 38,250 13,500 32,000 100% DM = 0% DM 0 32,000 Total 67,050 51,980 Therefore, the equivalent units with respect to direct materials using the FIFO process costing method are 67,050.
For more question like Department visit the link below:
https://brainly.com/question/14941855
#SPJ11
What are the factors that make brands successful in international markets, how to built a brand internationally? (30 points) a) How Coca Coca became a successful brand in international markets, what makes Coca Cola successful in a global market? b) Why Coca-cola still dominates the beverage market
Coca-Cola is a prime example of a brand that has achieved tremendous success in international markets by adopting effective marketing strategies, maintaining consistency, adopting a localized approach.
Market research: Brands must research the market in which they plan to launch their products. Understanding the cultural values, attitudes, and beliefs of the target market is essential. The research should cover the preferences of customers and competition in the target market.
Quality of products and services: The quality of products and services is crucial for any brand that intends to expand its business in international markets. Customers expect high-quality products and services that meet their expectations.
Marketing strategies: Marketing strategies can make or break a brand's success in international markets. Brands must adopt marketing strategies that resonate with the target audience.
To know more about marketing strategies visit:-
https://brainly.com/question/31854392
#SPJ11
Selected financial data from the June 30 year-end statements of Safford Company are given below:
Total assets
$
3,600,000
Long-term debt (12% interest rate)
$
500,000
Total stockholders’ equity
$
2,400,000
Interest paid on long-term debt
$
60,000
Net income
$
280,000
Total assets at the beginning of the year were $3,000,000; total stockholders’ equity was $2,200,000. The company’s tax rate is 30%.
Required:
1. Compute the return on total assets. (Round your percentage answer to 1 decimal place (i.e., 0.1234 should be entered as 12.3).)
2. Compute the return on equity. (Round your percentage answer to 1 decimal place (i.e., 0.1234 should be entered as 12.3).) 3. Is financial leverage positive or negative?
1.
Return on total assets
%
2.
Return on equity
%
3.
Financial Leverage
1) the value of Return on total assets is 8.5%.
2) the value of Return on equity is 12.2%.
3) In, this case, the Financial Leverage is positive.
1. Return on total assets=Net income/Total assets
Total assets at the beginning of the year=$3,000,000
Total assets at the end of the year=$3,600,000
Increase in total assets=$600,000
So, Average total assets =($3,000,000+$3,600,000)/2=$3,300,000
Net Income=$280,000
Return on total assets= Net income /Average total assets=280,000/3,300,000=0.0848=8.5%
Therefore, Return on total assets is 8.5%.
2. Return on equity=Net income/Total stockholders’ equity
Net Income=$280,000
Total stockholders’ equity at the beginning of the year=$2,200,000
Total stockholders’ equity at the end of the year=$2,400,000
Increase in Total stockholders’ equity=$200,000
So, Average stockholders’ equity=($2,200,000+$2,400,000)/2=$2,300,000
Return on equity=Net income/Average stockholders’ equity=280,000/2,300,000=0.1217=12.2%
Therefore, Return on equity is 12.2%.
3. Financial leverage is calculated by dividing total assets by total stockholders' equity. If the resulting ratio is greater than 1, the financial leverage is positive, and if the ratio is less than 1, the financial leverage is negative.
Total assets = $3,600,000 and total stockholders’ equity = $2,400,000
.Financial leverage=Total assets/Total stockholders' equity=3,600,000/2,400,000=1.5
Therefore, Financial Leverage is positive.
Learn more about total assets at:
https://brainly.com/question/32542972
#SPJ11
what do you think is the source of labor market discrimination against obese people? Would market forces be sufficient to eliminate it? explain
The source of labor market discrimination against obese people can be attributed to a combination of societal biases, stereotypes, and misconceptions about weight and health.
Obese individuals may face negative assumptions regarding their productivity, work ethic, health status, and appearance, leading to discriminatory practices during hiring, promotion, and workplace treatment.Market forces alone may not be sufficient to eliminate labor market discrimination against obese people.
To address this issue, it requires a multi-faceted approach that includes:
Raising awareness and combating stereotypes: Promoting education and awareness about obesity, challenging stereotypes, and highlighting the abilities and qualifications of obese individuals can help dispel misconceptions and reduce bias.
Legal protections: Implementing and enforcing anti-discrimination laws that explicitly prohibit discrimination based on weight or appearance can provide legal recourse for victims of discrimination and create a deterrent for employers engaging in discriminatory practices.
Workplace policies and diversity programs: Encouraging inclusive workplace environments through diversity and inclusion programs can help create a culture of acceptance and equal opportunities for all employees, regardless of their weight.
Health and wellness initiatives: Employers can implement wellness programs that focus on promoting healthy lifestyles for all employees, rather than targeting specific body types.
Collaboration and advocacy: Stakeholders, including government agencies, advocacy groups, and employers, can work together to address the issue of labor market discrimination.
By combining these approaches, it is possible to mitigate labor market discrimination against obese individuals and promote a fair and inclusive labor market that values skills, qualifications, and diversity.
To know more about labor market click here
brainly.com/question/29998425
#SPJ11
T-Mobile and Sprint argued that their merger should be approved by the Justice Department because
Multiple Choice
Sprint will gain additional wireless towers from T-Mobile.
there are many wireless providers available for consumer.
the merger will lead to efficiencies because a larger firm can enjoy economies of scale and can keep prices low.
it will result in higher prices for consumers.
T-Mobile and Sprint argued that their merger should be approved by the Justice Department because C. the merger will lead to efficiencies because a larger firm can enjoy economies of scale and can keep prices low.
What reasons did T-Mobile and Sprint give for their merger ?T-Mobile and Sprint advocated for the approval of their merger by the Justice Department, putting forth the argument that the union would engender efficiencies owing to the amplified size of the resultant firm. They contended that a larger entity would avail itself of economies of scale, consequently enabling the maintenance of low prices for consumers.
The proponents of the merger emphasized that the consolidation would yield synergistic benefits by capitalizing on economies of scale. With a larger combined entity, the merged company would be able to benefit from cost efficiencies and streamlined operations, thereby achieving lower production costs.
Find out more on mergers at https://brainly.com/question/15181922
#SPJ4