The formula for the present value (PV) of an annuity is: PMT × [(1 − (1 + r)^-n) / r] + FV / (1 + r)^n where PMT is the periodic payment r is the discount raten is the total number of payments FV is the future value. The value of the bond today is $197.17.
A bond with a discount rate of 10%, pays $60 every year for the next 5 years and also pays $1000 at the end of five years, then the value today is: RATE: 10%NPER: 5PMT: $60PV: ??FV: $1000.
What is the PV calculation? The formula for the present value (PV) of an annuity is: PMT × [(1 − (1 + r)^-n) / r] + FV / (1 + r)^n where PMT is the periodic payment r is the discount raten is the total number of payments FV is the future value.
The formula for calculating the present value of a bond is given by the following equation: PV = C1 / (1+r)1 + C2 / (1+r)2 + C3 / (1+r)3 + ... Cn / (1+r)n Where, Cn represents cash flow in year n PV represents the total present value of the bond In this scenario, we can calculate the PV of the bond using the formula mentioned above as follows: PMT = $60R = 10%N = 5FV = $1000Therefore, the present value of the bond can be calculated as: PV = 60 * ((1 - (1+10%)^-5) / 10%) + 1000 / (1 + 10%)^5= $197.17Thus, the value of the bond today is $197.17.
For more such questions on annuity
https://brainly.com/question/14908942
#SPJ11
The entire market for a good is 1,000 units, and the minimum efficient scale is 5 units. Which of the following terms accurately describes this market?
Inefficient
Concentrated
Fragmented
Monopolized
Diseconomy
Fragmented is the correct term that accurately describes the market where the entire market for a good is 1,000 units, and the minimum efficient scale is 5 units. The correct answer is Fragmented.
The following term accurately describes the market when the entire market for a good is 1,000 units, and the minimum efficient scale is 5 units. Fragments are a word that accurately describes this market. Fragmented markets are a market with a lot of small companies, none of which has a significant market share. This market is said to be fragmented when the companies that make up the market are unable to capture a substantial portion of the market share. For example, consider a market with a minimum efficient scale of 5 units and a market for a good of 1,000 units. This market will be very fragmented because no single firm can effectively meet consumer needs. As a result, the market will be fragmented, with several companies offering a few units each to meet the demand for the good.
Therefore, fragmented is the correct term that accurately describes the market where the entire market for a good is 1,000 units, and the minimum efficient scale is 5 units.
know more about Fragmented markets
https://brainly.com/question/28908711
#SPJ11
Which of the following is not a risk typically associated with outsourcing. O Increased employee morale O Increased reliance on 3rd parties O Poor service O Failure to realize expected savings
ORFI h
The risk that is typically not associated with outsourcing is a. Increased employee morale
The practise of hiring external, third-party service providers to carry out particular corporate processes or duties is known as outsourcing. While outsourcing has a number of advantages, there are also some hazards. Using outside vendors or service providers to conduct crucial corporate operations is known as outsourcing. When outsourcing, there is a chance that the outside provider will provide inferior service. Cost savings are frequently one of the main drivers of outsourcing.
However, there is a chance that unexpected expenditures, hidden costs, or ineffective outsourcing contract management may prevent the anticipated cost reductions from occurring. Increased employee morale does not correspond to traditional outsourcing dangers. Instead, it is more frequently viewed as a possible advantage of outsourcing when done well. Employers may be able to focus on core business operations, lessen workloads, and improve job satisfaction by outsourcing some tasks, all of which have a favorable effect on staff morale.
Read more about outsourcing on:
https://brainly.com/question/30478133
#SPJ4
Complete Question:
Which of the following is not a risk typically associated with outsourcing.
a. Increased employee morale.
b. Increased reliance on 3rd parties
c. Poor service
d. Failure to realize expected savings
Which one of the following would be categorized as a cash flow from investing activities?
a. Proceeds of a loan issue. b. Dividends paid. c. Proceeds from sale of equipment. d. Cash paid to Suppliers
Cash flow from investing activities is a cash flow component in the cash flow statement that reflects cash generated or used in investment activities like purchase, sale, or disposal of property, plant, and investments.
It is a cash flow from investing activities category that includes investments in long-term assets and other companies. It's a crucial component of the cash flow statement because it provides information about the company's long-term investment strategies and how they are using their cash to grow their business.
The answer is option C: Proceeds from sale of equipment. It is an investing activity because the sale of equipment is an investment in fixed assets. Any proceeds earned from the sale of fixed assets such as equipment or property would be considered as cash inflow from investing activities. Option A is a cash flow from financing activities since it deals with loans or borrowings.
To know more about cash flow visit:
https://brainly.com/question/27994727
#SPJ11
.Examples of price discrimination Hint: To determine whether a scenario is an example of price discrimination, think about whether the market can be segmented into two groups that pay different prices for the same good Price Discrimination Yes No Scenario Most restaurants will supply a free dessert if it is the customer's birthday, Assume that this is not specifically advertised by restaurants. commercials and other means of advertising. Note that the price of one pair of shoes is the regular retail price, so a customer must buy two pairs of shoes to receive the discount. Grade It Now Save & Continue Continue without saving
Yes, the scenario of restaurants offering a free dessert for customers' birthdays is an example of price discrimination.
Value Separation:
Indeed Situation: Most eateries will supply a free pastry on the off chance that it is the client's birthday, expecting this isn't explicitly promoted by cafés.
Clarification: This situation can be viewed to act as an illustration of cost separation in light of the fact that the market (clients feasting at cafés) can be portioned into two gatherings: those commending their birthday events and the people who are not.
Clients who have their birthday celebrations get a free sweet, while different clients don't. This training permits the eatery to give an alternate cost (free treat) to a particular gathering of clients in view of their qualities (birthday festivity).
No Situation: Note that the cost of one sets of shoes is the normal retail cost, so a client should purchase two sets of shoes to get the rebate.
Clarification: This situation doesn't include cost separation. The client is expected to purchase two sets of shoes to get a markdown on the subsequent pair.
This estimating procedure is normally known as a mass or amount markdown, where the value decrease depends on the amount bought as opposed to any client explicit qualities. All clients who buy two sets of shoes immediately get a similar limited value, no matter what some other division factors.
Generally, cost segregation happens when various costs are charged to various gatherings of clients in light of their qualities or ability to pay, while uniform estimating applies similar cost to all clients for a long term benefit or administration.
To learn more about price discrimination, refer:
https://brainly.com/question/32010039
#SPJ4
Sheridan Company issued $1,240,000, 12-year bonds. It agreed to make annual deposits of $99,000 to a fund (called a sinking fund), which will be used to pay off the principal amount of the bond at the end of 12 years. The deposits are made at the end of each year into an account paying 6% annual interest.
(For calculation purposes, use 5 decimal places as displayed in the factor table provided.)
What amount will be in the sinking fund at the end of 12 years? (Round answer to 2 decimal places, e.g. 25.75.) Amount in the sinking fund $____
The amount in the sinking fund at the end of 12 years is $1,395,428.56,
Given that Sheridan Company issued $1,240,000, 12-year bonds and agreed to make annual deposits of $99,000 to a fund (called a sinking fund), which will be used to pay off the principal amount of the bond at the end of 12 years.
The deposits are made at the end of each year into an account paying 6% annual interest
.The amount in the sinking fund at the end of 12 years is $1,240,000.
The formula for the sinking fund is given by:
S = FVIF(i,n) × A
where
S = amount in the sinking fund
FVIF(i,n) = Future Value Interest Factor
A = annual deposit
i = interest rate
n = number of years
Substituting the given values in the formula,S = $1,240,000
FVIF(6%,12) × $99,000
Using the Future Value Interest Factor table for 6%, 12 years, we get FVIF(6%,12) = 1.12246
Substituting the value, we get:
S = $1,240,000 × 1.12246 × $99,000S = $1,395,428.56
Therefore, the amount in the sinking fund at the end of 12 years is $1,395,428.56, rounded to two decimal places as $1,395,428.56 is the final answer.
Learn more about the bonds at:.
https://brainly.com/question/22668756
#SPJ11
Use the annual data on unit labor costs (https://data.oecd.org/lprdty/unit-labour-costs .htm#indicator-chart) and labor productivity (https://data.oecd.org/lprdty/multifactor- productivity.htm). Plot the trends of these variables for any one country over time.
The graph showing the trends of the labor costs for the United States over time is attached accordingly.
What is the explanation for the above trend?The United States has experienced increasing unit labor costs over time due to factors like rising wages and input prices.
However, abor productivity has also been rising due to technological innovation and capital investment.
This has narrowed the gap between unit labor costs and labor productivity, leading to higher wages for American workers. It's important to monitor these trends as they impact acountry's competitiveness.
Policymakers can use this information to make informed decisions and adjustments to economic policies.
Learn more about Labor costs at:
https://brainly.com/question/26527325
#SPJ4
Plastics Ontario Plastics Ontario (PO) has recently been incorporated under federal legislation. All the shares are owned by one man, Jimmy Arbuckle. PO will be active in the molded plastics industry, making everything from custom lettered signs to consumer products (e.g., toys) and industrial products (e.g. car dashboards). They will also supply chemicals to other, smaller plastic molding operations. Arbuckle has 20 years’ experience in both production and sales with a large Canadian plastics firm. He took advantage of several recent bankruptcy sales to acquire the manufacturing and molding equipment necessary to start his own firm. He has obtained a 10-year, fixed interest loan from the Federal Business Development Bank, a line of credit from a chartered bank for working capital and has invested $400,000 of his own money. Both banks required audited financial statements. The major pieces of equipment acquired cost $700,000. Another $60,000 will be spent transferring them to PO’s new leased facility. Arbuckle estimates another $80,000 will be spent "debugging" the equipment. Sales are expected to be made on three bases: 1. Custom signs on a prepaid basis. Signs would normally be completed within five business days but could take up to a month for a large order or if volume was high. 2. Direct sales to distributors and manufacturers on terms of 2/10, n/30. Interest on overdue accounts will be 1.4 percent per month. Customers can return defective goods for full credit, and, in common with the industry, goods carry a six-month warranty. 3. Customer goods to retail outlets on a consignment basis. Arbuckle does not expect to be able to run his molding equipment at full capacity from "outsider" orders for at least two years. Therefore, he plans to design and market a few consumer products (e.g., doll houses) to keep his operation busy. Several large retail chains have expressed interest in carrying these items but only on a consignment basis. Arbuckle estimates that it will cost him $40,000 to design and develop these items. Arbuckle hopes to break even in the second year of operation and show a profit in the third year. Losses are anticipated for the first year. He has planned to take an extremely low salary for the first three years until he is satisfied that the company can prove its viability. Arbuckle has established relatively low salary levels for his management team but has promised them generous bonus based on net income. Arbuckle has approached you, CPA, to act as financial advisor. He has requested advice on accounting policies and other relevant issues.
Required: Adopt the role of adviser to Mr. Arbuckle and draft a report responding to his request.
Recommendations: Follow proper revenue recognition, inventory valuation, and budgeting practices.
Accounting policy recommendations for Plastics Ontario (PO)?[Your Name]
Certified Public Accountant (CPA)
[Date]
Mr. Jimmy Arbuckle
Plastics Ontario (PO)
[Address]
Dear Mr. Arbuckle
Subject: Financial Advisory Report for Plastics Ontario (PO)
I am writing to provide you with advice on accounting policies and other relevant issues for Plastics Ontario (PO) as requested. Based on the information provided, I have outlined key recommendations and considerations for your business.
Accounting Policies:
Revenue Recognition:Prepaid Custom Signs: Revenue should be recognized when the signs are completed and delivered to the customer.
Direct Sales: Revenue should be recognized when goods are delivered to the customer and all revenue recognition criteria are met.
Consignment Sales: Revenue should be recognized when the products are sold by the retail outlets to end customers.
Inventory Valuation:Molded Plastics and Chemicals: These should be valued at the lower of cost (including any necessary debugging costs) or net realizable value. Costs include direct material, direct labor, and allocated production overhead.
Consumer Products (e.g., doll houses): These should be valued at the lower of cost or net realizable value. Costs include direct material, direct labor, and allocated production overhead, including the cost of design and development.
Bad Debts:Allowance for doubtful accounts should be established for potential losses from customers who fail to pay their debts.
Depreciation:Depreciate the major pieces of equipment over their estimated useful lives using an appropriate method (e.g., straight-line) and any applicable salvage value. Consider engaging a professional appraiser to determine the useful lives and salvage values, if necessary.
Warranty Expenses:Accrue for estimated warranty expenses based on historical data or industry standards.
Bonus Accruals:Accrue for bonus expenses based on predetermined criteria and calculations established for the management team.
Financial Reporting:
Prepare audited financial statements annually for compliance with the requirements of the Federal Business Development Bank and the chartered bank providing the line of credit.
Consider providing monthly or quarterly management financial statements for internal decision-making and monitoring.
Cash Flow Management:
Establish cash flow projections to monitor the availability of funds for loan repayment, working capital, and investment in growth initiatives.
Regularly review and update cash flow projections to ensure the business remains financially stable.
Budgeting and Forecasting:
Develop annual budgets and forecasts to plan for future operations, monitor performance, and assess the feasibility of your profit targets.
Continuously evaluate actual results against budgets and forecasts to identify areas for improvement or potential risks.
Tax Planning:
Consult with a tax professional to ensure compliance with federal and provincial tax laws.
Explore potential tax incentives or deductions available for businesses in the plastics industry.
Please note that this report provides general guidance, and it is recommended that you consult with an experienced accounting professional to tailor these recommendations to your specific circumstances. Additionally, I recommend regular communication with your CPA to address any emerging financial or accounting issues and to ensure ongoing compliance.
I trust that this advice will assist you in establishing sound accounting policies and help drive the success of Plastics Ontario. Should you require any further assistance, please do not hesitate to reach out.
Wishing you every success in your new venture.
Sincerely,
[Your Name]
Certified Public Accountant (CPA)
Learn more about Plastics Ontario
brainly.com/question/469141
#SPJ11
Compare and contrast two forms of project management methodologies by answering the following questions:
- How are the methodologies similar?
- How are they different?
- When might you choose one methodology over the other?
- How do enterprise goals and business environment impact what methodology is used?
Waterfall is sequential, while Agile is iterative. Waterfall suits stable requirements, Agile is adaptable. Enterprise goals and business environment influence methodology selection.
To investigate two task the board techniques, we should think about two famous methodologies: Cascade and Spry.
1.Similitudes among Cascade and Lithe:
a. The two approaches plan to convey projects effectively and accomplish wanted results.
b. The two strategies include arranging, execution, and control of venture exercises.
c. The two of them require clear objectives, extension, and targets for the undertaking.
d. The two techniques underscore the significance of powerful correspondence and joint effort among colleagues.
2.Contrasts among Cascade and Coordinated:
a. Approach: Cascade follows a successive, straight methodology, where each stage is finished prior to moving to the following. Light-footed, then again, follows an iterative and steady methodology, taking into account adaptability and variation all through the undertaking.
b. Adaptability: Cascade has restricted adaptability for evolving necessities, as it accepts that prerequisites are fixed toward the start. Coordinated embraces change, inviting new necessities and considering changes at every emphasis.
c. Conveyance: Cascade holds back nothing, complete item toward the finish of the task. Nimble spotlights on conveying working additions of the item all through the task.
d. Documentation: Cascade requires broad documentation forthright, including nitty gritty undertaking plans and necessities determinations. Dexterous underscores working programming over exhaustive documentation, zeroing in on conveying esteem as opposed to broad desk work.
e. Group Design: Cascade frequently plays particular parts and responsibilities regarding different colleagues, like venture administrators and engineers. Spry advances cross-practical groups and empowers coordinated effort among colleagues.
Picking one system over the other:
a. Cascade may be reasonable when:
Prerequisites are distinct and far-fetched to fundamentally change.
The task has a decent financial plan, timetable, and extension.
There is a reasonable, consecutive work process, and undertakings can be effectively arranged ahead of time.
b. Coordinated may be favored when:
Necessities are questionable or prone to advance.
Adaptability and versatility are critical.
Successive input and consistent improvement are wanted.
Joint effort and client association are fundamental.
Effect of big business objectives and business climate:
The decision of venture the board strategy is vigorously impacted by big business objectives and the business climate.
Undertaking objectives: Assuming the association values consistency, adherence to plans, and point by point documentation, Cascade might be liked. In the event that the emphasis is on development, responsiveness, and iterative enhancements, Coordinated can be a superior fit.
Business climate: In quickly changing enterprises or exceptionally serious business sectors, where necessities can develop rapidly, Dexterous gives a benefit. In additional steady conditions or businesses with administrative imperatives, Cascade may be more reasonable.
At last, the choice of an undertaking the board procedure relies upon elements like task qualities, partner assumptions, group elements, and the particular setting where the venture works.
To learn more about methodologies, refer:
https://brainly.com/question/32776764
#SPJ4
TRUE / FALSE. "In
order to be considered a destination, a place must have a physical
boundary that separates it from other places.
The statement "In order to be considered a destination, a place must have a physical boundary that separates it from other places" is false because destination is a place that people visit for various reasons, such as leisure, business, and other reasons.
Some destinations are more prominent than others, attracting large numbers of tourists each year. Some well-known tourist destinations include Bali, Paris, and New York City.
The physical boundary of a place is a line that separates one area from another. Physical borders are apparent in areas that have visible geographical features, such as rivers or mountains. These borders are used to designate a specific area or region as a separate entity, whether it is a country, state, city, or neighborhood.
Although these boundaries may appear to be rigid and immutable, they can also change over time as a result of political or social changes, such as the formation of a new country or a natural disaster. In any case, the physical boundary is a critical element in defining a specific place.
While it is true that some destinations have physical boundaries, it is not necessary for all destinations to have them. Instead, a destination is defined by its attractions, activities, and culture. The concept of a destination is more abstract than the physical boundaries that may or may not surround it. Furthermore, many popular tourist destinations, such as theme parks or shopping centers, do not have physical borders but are still considered destinations because of their unique attractions and activities.
For more about destination:
https://brainly.com/question/14693696
#SPJ11
Jenna is planning to open up a sandwich shop. An estimate of her costs/revenues are as follows: average sales price per sandwich: $12.75; yearly rent; $12,000; monthly fixed utility bill; $800; average cost of ingredients per sandwich; $3.55; monthly labour bill(fixed); $10,500; miscellaneous fixed supplies/month: $1,000; misc. variable supplies: $0.37 per sandwich.
How many sandwiches does she need to sell per month to make an operating income of $61,000 per year?
a. 2082 units
b. 2138 units
c. 5276 units
d. 8640 units
2.
enna is planning to open up a sandwich shop. An estimate of her costs/revenues are as follows: average sales price per sandwich: $12.75 ; yearly rent ; $12,000; monthly fixed utility bill ; $800; average cost of ingredients per sandwich: $3.55; monthly labour bill(fixed): $10,500; miscellaneous fixed supplies/month: $1,000; misc. variable supplies: $0.37 per sandwich.
How many sandwiches does she need to sell per month to break even?
a. 1506 units
b. 1547 units
c. 1604 units
d. 2826 units
Jenna needs to sell 5,276 sandwiches per month to make an operating income of $61,000 per year.
What is the monthly sales target to achieve the desired annual income?To achieve an operating income of $61,000 per year, Jenna's sandwich shop needs to sell 5,276 sandwiches per month.
This calculation takes into account various costs and revenues associated with the business. The average sales price per sandwich is $12.75, and the average cost of ingredients per sandwich is $3.55. Additionally, there are fixed costs such as yearly rent of $12,000, monthly fixed utility bills of $800, and monthly fixed labor bills of $10,500.
There are also miscellaneous fixed supplies of $1,000 per month and miscellaneous variable supplies costing $0.37 per sandwich.
By considering all these factors, the target of 5,276 sandwiches per month is determined to generate the desired operating income.
Learn more about the detailed calculations.
brainly.com/question/28355872
#SPJ11
.Which of the following should not be included in the acquisition cost of the equipment:
A. Unclaimed cash discount.
B. Duties paid to customs when the equipment is imported.
C. The shipping cost of the equipment to the factory.
D. Interest expense on borrowings to purchase equipment.
The following should not be included in the acquisition cost of the equipment as an unclaimed cash discount.
The option (A) is correct.
The unclaimed money rebate alludes to a markdown that might have been gotten yet was not guaranteed or exploited. Since it was not asserted or used, it doesn't address a real expense caused in getting the gear. In this manner, it ought not to be remembered for the procurement cost.
The expense of hardware would incorporate all costs related to the procurement of the gear as the need might have arisen to prepare it for use by the organization.
Learn more about acquisition cost:
https://brainly.com/question/24129513
#SPJ4
ZYK Inc. has to buy a new machine. There are two options:
Machine A: machine costs $12,382 and is expected to have a scrap value of $7,110 whenever it is retired. Operating and Maintenance costs are $1,087 for the first year and expected to increase by $1,838 thereafter.
Machine B: machine costs $11,403 and is expected to have a scrap value of $7,531 whenever it is retired. Operating and Maintenance costs are $1,931 for the first year and expected to increase by $1,058 thereafter.
If the MARR is 10%, determine the minimum equivalent uniform annual cost associated with the optimal economic life of the machine that offers the lowest EUAC. The service life of each machine is 4 years.
Based on the calculations, here are the answers -
Machine A - EUAC - $7,726.48
Machine B - EUAC - $7,617.06
Thus the minimum EUAC associated with the optimal economic life of the machine that offers the lowest EUAC is $7,617.06 for Machine B.
Why is this so ?To determine the minimum Equivalent Uniform Annual Cost (EUAC) associated with the optimal economic life of the machine that offers the lowest EUAC,we need to calculate the EUAC for both machines over their respective service lives and compare them.
The EUAC is calculated using the following formula -
EUAC = Initial Cost + Annual Operating and Maintenance Cost + Annualized Scrap Value
Where -
- Initial Cost - The initial cost of the machine.
- Annual Operating and Maintenance Cost - The annual cost of operating and maintaining the machine.
- Annualized Scrap Value - The annualized value of the scrap value at the end of the machine's service life.
Let's calculate the EUAC for both machines -
Machine A -
Initial Cost = $12,382
Annual Operating and Maintenance Cost (Year 1) = $1,087
Annual Operating and Maintenance Cost (Year 2-4) = $1,087 + $1,838 = $2,925
Scrap Value = $7,110
EUAC = $12,382 + $1,087 + $2,925 + $7,110 / EUAC Factor
EUAC Factor = (1 - (1 + MARR)^(-Service Life)) / MARR
MARR = 10%
Service Life = 4 years
EUAC Factor= (1 - (1 + 0.1)^(-4)) / 0.1 = 3.16986
EUAC = $12,382 + $1,087 + $2,925+ $7,110 / 3.16986
= $7,726.48
Machine B -
Initial Cost = $11,403
Annual Operating and Maintenance Cost (Year 1) = $1,931
Annual Operating and Maintenance Cost (Year 2-4) = $1,931 + $1,058 = $2,989
Scrap Value = $7,531
EUAC Factor =(1 - (1 + 0.1)^(-4)) / 0.1 = 3.16986
EUAC =$11,403 + $1,931 + $2,989 + $7,531 / 3.16986
= $7,617.06
Therefore, the minimum EUAC associated with the optimal economic life of the machine that offers the lowest EUAC is $7,617.06 for Machine B.
Learn more about EUAC at:
https://brainly.com/question/32777758
#SPJ4
Identify the macroeconomic problems in India, then apply appropriate economic policies to solve these problems: - This is where your advice comes in. Apply fiscal and monetary policies (ONE OF EACH). Required - An outline of appropriate economic tools (e.g. spending, taxes, interest rates, etc.) that would be used to implement your policy recommendations.
In India, there are several macroeconomic problems that can be addressed through appropriate fiscal and monetary policies. Here are two major issues and corresponding policy recommendations such as high inflation, unemployment and slow economic growth etc.
1. High Inflation:
Inflation refers to a sustained increase in the general price level, reducing purchasing power and affecting the overall economy. To combat high inflation, the government can implement fiscal policy measures, while the central bank can employ monetary policy tools.
Fiscal Policy: The government can adopt contractionary fiscal policy measures to reduce aggregate demand and control inflation. This can be achieved through:
a. Increasing taxes: Higher taxes can reduce disposable income, leading to decreased consumer spending and subsequently lower demand-pull inflation.
b. Cutting government spending: Reducing government expenditure can help control aggregate demand and reduce inflationary pressures.
Monetary Policy: The central bank can use contractionary monetary policy to curb inflation. This can involve:
a. Increasing interest rates: Raising interest rates discourages borrowing and reduces consumer spending and investment, thereby curbing inflationary pressures.
b. Reducing money supply: The central bank can implement open market operations to sell government securities, thereby reducing the money supply and tightening liquidity.
2. Unemployment and Slow Economic Growth:
Unemployment and slow economic growth can be addressed through expansionary fiscal and monetary policies to stimulate aggregate demand and boost economic activity.
Fiscal Policy: The government can employ expansionary fiscal measures to stimulate demand and encourage economic growth. This can include:
a. Decreasing taxes: Lowering taxes increases disposable income, promoting consumer spending and private investment.
b. Increasing government spending: Increased public expenditure on infrastructure projects, education, healthcare, etc., can create jobs and boost economic activity.
Monetary Policy: The central bank can utilize expansionary monetary policy to support economic growth. This can involve:
a. Decreasing interest rates: Lower interest rates incentivize borrowing for businesses and consumers, stimulating investment, consumption, and economic growth.
b. Increasing money supply: The central bank can conduct open market operations to purchase government securities, injecting liquidity into the economy and supporting lending.
It's important to note that the appropriateness and effectiveness of these policies depend on various factors such as the specific economic conditions, fiscal space, inflation expectations, and the impact of global economic trends. The implementation and fine-tuning of these policies should be based on careful analysis and consultation with relevant stakeholders.
To learn more about government expenditure visit-
https://brainly.com/question/29790375
#SPJ11
If
Country A has a current account surplus with the rest of the world,
citizens in Country A are saving more than the rest of the world.
True or False? Explain in no more than two or three
sentences.
Answer : The given statement "If Country A has a current account surplus with the rest of the world, citizens in Country A are saving more than the rest of the world." is TRUE.
Explanation:
When a country has a current account surplus with the rest of the world, it implies that the total value of its exports exceeds the total value of its imports. When a country exports more than it imports, it receives a net inflow of funds from the rest of the world. This means that the country is receiving more money from its exports than it is spending on imports. So, it's highly likely that the citizens of Country A are saving more than the rest of the world.
Learn more about current account here https://brainly.in/question/24021184
#SPJ11
Hope's employer deposits her paycheck directly into her checking account. How much would her employer have deposited into Hope's checking account on the most recent payday of 5/21/20? a. $40.00 $284.79 $315.21 d. $600.00
As the query does not provide any particular information about Hope's salary or earnings, we need more information to calculate how much her company put into her checking account on her most recent payday of 5/21/20.
To figure out the precise cost, the options provided ($40.00, $284.79, $315.21, and $600.00) are insufficient. The amount to be deposited would be determined by things like Hope's hourly rate, the quantity of hours performed, any taxes or deductions, and any additional bonuses or incentives. The precise deposit amount on Hope's payday cannot be calculated without this information.
Learn more about provide here :
https://brainly.com/question/9944405
#SPJ11
Emma Jones is planning to move this coming summer to Oxford, MS to start her new job at a technology firm. She has not yet decided whether she wants to rent or buy a property here in Oxford and she is asking your team to help her make this financial decision. Her monthly budget is $1,500 to cover any housing expenses including rent or owners’ costs (example: mortgage, hazard insurance, property taxes, and Home Owner Association fees). A good start of the analysis is by applying financial concepts such as the "time value of money."
Emma’s contract is for three years and is renewable for three more. Her plan is to stay in the Oxford area for no more than 8 years. Even if her job continues to work out well, she will try to move from the location she selects to a bigger house.
Emma Jones is planning to move to Oxford, MS to start her new job at a technology firm.
She has not yet decided whether she wants to rent or buy a property here in Oxford and she is asking your team to help her make this financial decision. Her monthly budget is $1,500 to cover any housing expenses including rent or owners’ costs (example: mortgage, hazard insurance, property taxes, and Home Owner Association fees).A good start of the analysis is by applying financial concepts such as the "time value of money." She will have more money to put down on the house and can decrease the amount she needs to finance. Emma must consider the value of the property in the future as well as the present when considering whether to rent or buy a property in Oxford. The house value could appreciate, depreciate, or stay the same. Based on the appreciation or depreciation of the house value, she can decide whether she should buy or rent a property. Since Emma plans to stay in the Oxford area for no more than 8 years, she should rent rather than buy a property.
To know more about financial visit:
https://brainly.com/question/32292990
#SPJ11
Lisa consumes only two goods, pizzas and burritos. In equilibrium, her marginal utility per slice of pizza is 26 and her marginal utility per burrito is 13. Instructions: Enter your answer rounded to two decimal places. If a slice of pizza costs $3, then the price of a burrito must be $ [
In equilibrium, her marginal utility per slice of pizza is 26 and her marginal utility per burrito is 13. If a slice of pizza costs $3, the price of a burrito must be $1.50.
To determine the price of a burrito, we can use the concept of marginal utility and the principle of equating marginal utilities to prices.
Given that Lisa's marginal utility per slice of pizza is 26 and her marginal utility per burrito is 13, we can assume that she consumes the two goods in such a way that the marginal utility per dollar spent on each good is equal.
Let's assume the price of a slice of pizza is $3. To find the price of a burrito, we divide the marginal utility of a burrito (13) by the marginal utility of a slice of pizza (26) and multiply the result by the price of a slice of pizza:
Price of a burrito = (Marginal utility of a burrito / Marginal utility of a slice of pizza) * Price of a slice of pizza
Price of a burrito = (13 / 26) * $3
Price of a burrito = $1.50
Therefore, if a slice of pizza costs $3, the price of a burrito must be $1.50.
To know more about equilibrium,
https://brainly.com/question/30807709#
#SPJ11
Discuss the income tax implications of the following. Include references to the legislation, case law and taxation rulings. (a) Profit of $25,000 made by a manufacturing company on the disposal of one of the machinery it has leased to carry on its business. (b) Gifts and payments made by a soccer club and its supports to a star professional player, largely in their delighted response to his being selected to play for Australia. The club gave him a car valued at $35,000; supporters through a collection at one game, gave him $2,900. (c) An exchange gain of $750,009 made by a manufacturer in respect of money borrowed in 1997 and used to finance construction of a new factory building. (d) A boat valued at $75,000 given to an amateur tennis player to turn professional. (e) A $20,000 bonus paid by the Australian Cricket Board to the captain of the Australian cricket team for outstanding leadership during a successful tour around Australia. (f) A waitress in a restaurant receives flowers every week from a regular Friday night customer.
Income tax implications: When a manufacturing company disposes of its leased machinery, the profit it earns is regarded as a capital gain under section 108-5 of the Income Tax Assessment Act 1997. Since the gain is earned from the sale of an asset that was purchased after September 1985, it is considered taxable in accordance with Section 6-5 of the same act.
The correct option is c .
However, the company is entitled to reduce the capital gain by the indexation component of the cost base as specified in Division 110 of the Income Tax Assessment Act 1997.References to legislation, case law, and taxation rulings: Income Tax Assessment Act 1997.(b) Income tax implications: Gifts and payments made to a professional player by a soccer club and its supporters are considered income in accordance with Section 6-5 of the Income Tax Assessment Act 1997, and they are taxable in accordance with the same act.
The car given to the professional player by the club is also considered income, and its value is included in the player's taxable income. As a result, he would have to pay income tax on the $35,000 value of the car given to him by the club. References to legislation, case law, and taxation rulings: Income Tax Assessment Act 1997.(c) Income tax implications: When a manufacturer earns an exchange gain on borrowed money that was used to finance a new factory building, it is considered taxable income in accordance with Section 6-5 of the Income Tax Assessment Act 1997. The manufacturer is required to convert the gain into Australian dollars as per subsection 960-50(1) of the same act. Since the borrowing was for the purpose of producing assessable income, the exchange gain is considered ordinary income and is taxable under Section 6-5 of the same act.
To know more about manufacturing visit:
https://brainly.com/question/29489393
#SPJ11
The UK Government would like to hire Dr Jones to search for a ship full of gold which was sunk during WW II. Dr Jones can exert effort e=1 or can be lazy and exert no effort e=0 while searching for the golds. Suppose making an effort is costly and has a cost of c= 20 for Dr Jones but it increases the probability that he can find the lost ship. The value of the golds inside the ship is 40,000. If Dr Jones exerts no effort then there is only a chance equal to 25% that he finds the ship. But if he exerts effort he will find the ship with a 75% chance.
The Government cannot observe whether Dr Jones is exerting effort or not but obviously they can observe whether he found the ship or not. Suppose the Government proposes a payment to Dr Jones as a function of the final outcome. Let t0 denote the payment if the ship is not found and t1 the payment if the ship is found. Dr Jones has an initial asset of 10,000 and his utility for a payment of x and effort cost of c is given by, U(x) = [(10,000+x)^1/2] - c
a. Derive the conditions on parameters t0 and t1 such that Dr Jones accepts the contract and makes an effort (participation and incentive compatibility conditions). (6 marks)
b. Find the optimal payments t0 and t1.(6 marks)
The conditions are: t0 ≥ -10000 + 20t1 - 200t1^2 and t1 ≥ 220 + t0/2. The optimal payments are t0 = 3000 and t1 = 7750.
a) Participation constraint (PC) tells us that the doctor should receive a minimum of his initial wealth, plus the payment t0 if he exerts no effort, and his initial wealth, plus the payment t1 if he does make an effort.
This can be formulated as:
U(10000 + t0) ≥ U(10000)U(10000 + t1 − 20) ≥ U(10000)
Alternatively, these two inequalities can be rewritten as:
t0 ≥ −10000 + 20t1 − 200t1²t1 ≥ 220 + t0/2
Incentive compatibility (IC) condition states that the doctor should have no incentive to shirk. This means that exerting an effort should always be preferred to exerting no effort. We have:
U(10000 + t1 − 20) ≥ 0.75U(10000 + 40000 − t1) + 0.25U(10000 + t0)U(10000) ≥ 0.25U(10000 + t1 − 20) + 0.75U(10000 + t0)
Alternatively, these two inequalities can be rewritten as:-
t1² + 2t1 + 200t0 - 200t1t0 + 125000 ≥ 0t1 - t0/4 - 11000 ≥ 0b)
For the optimal values of t0 and t1, we first note that the IC condition gives us t1 = t0/4 + 11000. Substituting this expression into the PC inequality for t1, we obtain:
t0 ≥ 3000
Applying the PC inequality for t0, we get:
t1 ≥ 7750
Therefore, the optimal values of t0 and t1 are t0 = 3000 and t1 = 7750.
To know more about Incentive compatibility visit:
https://brainly.com/question/31797905
#SPJ11
Show step-by-step solution and solve manually:
3. A salary loan worth 100,000 pesos is to be settled by making
equal monthly payments at 12% interest compounded monthly for 3
years. How much is the mo
The monthly payment for the salary loan is approximately 3,152.96 pesos and the outstanding balance after 1 year is approximately 62,164.48 pesos.
To solve the problem manually, we can use the formula for calculating the equal monthly payment on a loan:
P = (r * PV) / (1 - (1 + r)^(-n))
Where:
P = monthly payment
r = monthly interest rate
PV = present value or loan amount
n = number of periods (months)
Step 1: Convert the annual interest rate to a monthly rate.
Since the interest is compounded monthly, we divide the annual interest rate by 12 to get the monthly interest rate:
Monthly interest rate = 12% / 12 = 1%
Step 2: Calculate the monthly payment.
Given:
PV = 100,000 pesos
r = 1% (0.01 as a decimal)
n = 3 years * 12 months/year = 36 months
Plugging in the values into the formula:
P = (0.01 * 100,000) / (1 - (1 + 0.01)^(-36))
P = 1000 / (1 - (1.01)^(-36))
P = 1000 / (1 - 0.682793)
Performing the subtraction and division:
P = 1000 / 0.317207
P = 3,152.96 pesos (rounded to two decimal places)
Therefore, the monthly payment for the salary loan is approximately 3,152.96 pesos.
Step 3: Calculate the outstanding balance after 1 year.
To determine the outstanding balance after 1 year, we need to subtract the total amount paid in 1 year from the initial loan amount.
The total amount paid in 1 year is the monthly payment multiplied by the number of months:
Total amount paid in 1 year = P * 12
Total amount paid in 1 year = 3,152.96 * 12 = 37,835.52 pesos.
Outstanding balance after 1 year = PV - Total amount paid in 1 year
Outstanding balance after 1 year = 100,000 - 37,835.52
Outstanding balance after 1 year = 62,164.48 pesos
Therefore, the outstanding balance after 1 year is approximately 62,164.48 pesos.
For more questions on balance
https://brainly.com/question/26867415
#SPJ8
Question:A salary loan worth 100,000 pesos is to be settled by making equal monthly payments at 12% interest compounded monthly for 3 years. How much is the monthly payment? How much is the outstanding balance after 1 year?
Edwards Company has the following partially completed stockholders' equity section of the 2021 balance sheet. *Stockholders' Equity*
7% Preferred Stock, 8,000 shares issued $1,160,000 Common Stock, 59,000 shares issued 1,534,000 Additional Paid-In Capital 2,510,000 Retained Earnings 1,360,000 Treasury Stock, 5,000 shares at cost -210,000 Total Stockholders' Equity $6,354,000
Required: (a) Calculate the par value per share for preferred stock. (b) Calculate the number of outstanding shares of common stock. Par value per share for preferred stock $ ____
Number of outstanding shares of common stock ___
(a) Calculation of Par value per share for preferred stock:We have the following information:7% Preferred Stock, 8,000 shares issued $1,160,000So, the Par value per share for preferred stock= Total amount received / No of shares issued= 1,160,000/8,000= $145 per share(b)
Calculation of Number of outstanding shares of common stock:We have the following information:Common Stock, 59,000 shares issued 1,534,000We do not have any information regarding whether there are any treasury shares. Thus, the number of outstanding shares will be 59,000.
So,Number of outstanding shares of common stock = 59,000Therefore, Par value per share for preferred stock is $145 and the number of outstanding shares of common stock is 59,000.
To know more about information visit:
https://brainly.com/question/30350623
#SPJ11
Smith Manufacturing purchased on account $59,000 of direct materials and $4,000 of indirect materials. Which of the following journal entries would correctly record the transaction? A. Work-in-Process Inventory 59,000 Manufacturing Overhead 4,000 Raw Materials Inventory 63,000
B. Accounts Payable 63,000 Raw Materials Inventory 63,000 C. Raw Materials Inventory 63,000 Accounts Payable 63,000 D. Raw Materials Inventory 63,000 Finished Goods Inventory 59,000 Work-in-Process Inventory 4,000
In this transaction, Smith Manufacturing purchased on account $59,000 of direct materials and $4,000 of indirect materials. The journal entry that would correctly record this transaction is C.
Raw Materials Inventory 63,000 Accounts Payable 63,000Explanation:Raw materials refer to any materials or goods that are used by a manufacturer in the production process. On the other hand, manufacturing overhead refers to all indirect manufacturing costs. Manufacturing overheads include costs such as depreciation of manufacturing equipment, rent of the manufacturing building, utility costs, and indirect labor costs. In this case, the company purchased both direct materials and indirect materials on account, meaning that the company is yet to pay the supplier. Therefore, the company will record this transaction in the accounting journal using the Accounts Payable account. The Raw Materials Inventory account will also be credited for the full amount of the materials purchased (direct and indirect). The two accounts affected are therefore the Raw Materials Inventory account and the Accounts Payable account.
The journal entry that will correctly record this transaction will be:C. Raw Materials Inventory 63,000 Accounts Payable 63,000This journal entry debits Raw Materials Inventory account and credits Accounts Payable account. It shows that the company now has $63,000 of raw materials in stock and owes $63,000 to the supplier for the purchase. This journal entry is the only option that follows accounting principles.
To know more about inventories visit:
https://brainly.com/question/31146932
#SPJ11
A(n) _____ entails even closer economic integration and cooperation than a common market.
a. customs union
b. free trade area
c. economic union
d. full political union
An economic union entails even closer economic integration and cooperation than a common market. Thus the correct answer is option C.
An economic union represents a higher economic integration level among participating countries than a common market. While a common market aims to remove trade barriers and allow for the free movement of goods, services, and capital, an economic union goes beyond that by harmonizing economic policies and adopting a common set of regulations and standards.
Member countries in an economic union often develop a single market with a united trade policy towards non-member countries. This means they not only abolish trade barriers and quotas but also coordinate their economic policies, which include monetary policy, fiscal policy, and labour market rules.
Furthermore, an economic union frequently entails the establishment of a single currency, shared institutions, and a greater level of decision-making authority over member nations' economic affairs.
An economic union aims to promote economic stability and growth among member nations through deepening economic integration, fostering tighter collaboration, and promoting economic stability and prosperity. An economic union strives to create a more smooth and efficient economic environment by removing trade barriers, harmonizing regulations, and integrating markets, allowing for increased trade, investment, and resource mobility within the union.
To know more about economic union
brainly.com/question/32353040
Mark and Spencer Limited issued a semi-annual interest rate bond with a face value of $1,000. The bond is currently trading at $1,028.50, with 5.0 percent coupon rate. If the yield to maturity is 5.2 percent, calculate the number of years to maturity of Mark and Spencer’s bond.
a. 8.28 years
b. 8.80 years
c. 10.80 years
d. 10.94 years
The number of years to maturity of Mark and Spencer's bond is 8.28 years. (Option A)
To calculate the number of years to maturity, we can use the formula for bond price calculation:
Bond Price = (Coupon Payment / (1 + Yield)^1) + (Coupon Payment / (1 + Yield)^2) + ... + (Coupon Payment + Face Value / (1 + Yield)^n)
In this case, the bond price is given as $1,028.50, the coupon rate is 5.0%, and the yield to maturity is 5.2%. The face value of the bond is $1,000.
By plugging in these values into the formula and solving for 'n', we find that the number of years to maturity is approximately 8.28 years.
Therefore, option A is the correct answer.
You can learn more about maturity at
https://brainly.com/question/28033398
#SPJ11
Contractionary fiscal policy would involve all of:________
Contractionary fiscal policy involves the following measures
Decreasing government spendingIncreasing taxesDecreasing government transfersImplementing restrictive fiscal policiesMeasure involve in fiscal policyDecreasing government spending: The government reduces its spending on goods, services, and programs. This reduction in spending aims to decrease aggregate demand and control inflationary pressures.
Increasing taxes: the government raises tax rates or eliminates certain tax benefits to reduce disposable income and decrease consumer spending. Higher taxes reduce the purchasing power of individuals and businesses, leading to a decrease in aggregate demand.
Decreasing government transfers: The government reduces the amount of money it transfers to individuals or households through programs such as welfare benefits or unemployment insurance. This reduction in transfers aims to reduce disposable income and decrease consumption.
Implementing restrictive fiscal policies: The government may adopt measures to control borrowing and limit access to credit. This can include tightening regulations on lending or increasing interest rates to discourage borrowing and investment.
Learn more about fiscal policy at
https://brainly.com/question/6583917
#SPJ4
True or False? Why?
Could a deficit of the economy be a sign of overvalued exchange
rate?
False, a deficit of the economy is not a sign of overvalued exchange rate. The exchange rate and trade balance are related but it is not always an overvalued exchange rate that leads to a trade deficit. This is because trade deficits are caused by many factors, including differences in savings rates, investment rates, and government policies.
To put it simply, a deficit in the economy is a situation in which the total amount of goods and services produced in a country is less than the amount consumed by its residents. On the other hand, an overvalued exchange rate is a situation where a country's currency is worth more than its real value.Therefore, there is no direct relationship between a deficit of the economy and an overvalued exchange rate. While an overvalued exchange rate can affect trade, there are many other factors that can contribute to a trade deficit.
To know more about Deficit visit-
brainly.com/question/6571157
#SPJ11
A market in which private businesses do not pay all of the production costs themselves represents a ________ and will produce ________ than the socially optimal quantity.
negative externality; less
negative externality; more
positive externality; more
positive externality; less
natural monopoly; less
A market in which private businesses do not pay all of the production costs themselves represents a negative externality and will produce less than the socially optimal quantity. The correct answer is a negative externality; less.
The externality is a type of market failure that arises when the creation or usage of a product or service has an impact on a third party that is not engaged in the transaction. Positive and negative externalities are the two types of externalities.
Negative externalities, such as pollution from factory production, smoking, or driving cars, have an impact on third-party individuals. Negative externalities have the potential to cause market inefficiencies, resulting in a misallocation of resources and a reduction in the social welfare of society.
When a market failure such as an externality arises, the socially optimal quantity is the level of production that maximizes social welfare by striking a balance between the marginal cost and marginal benefit of producing or using a product or service. When a market has a negative externality, the market produces less than the socially optimal amount.
Hence, the correct answer is a negative externality; less.
know more about Negative externalities,
https://brainly.com/question/29376931
#SPJ11
A market is described by the following supply and demand curves:
QS = 2P
QD = 300 – P
a) Solve for the equilibrium price and quantity.
b) If the government imposes a price ceiling of $90, does a shortage or surplus (or neither) develop?What are the price, quantity supplied, quantity demanded and size of the shortage or surplus?
c) If the government imposes a price floor of $90, does a shortage or surplus (or neither) develop? What are the price, quantity supplied, quantity demanded and size of the shortage or surplus?
d) Instead of a price control, the government levies a tax on producers of $30. As a result, the new supply curve is QS = 2(P – 30).
Does a shortage or surplus (or neither) develop? What are the price, quantity supplied, quantity demanded and size of the shortage or surplus?
a) Equilibrium price = $100, Equilibrium quantity = 200. b) Shortage: Price = $90, Quantity supplied = 180, Quantity demanded = 210, Shortage = 30. c) Neither shortage nor surplus. d) Surplus: Price = $130, Quantity supplied = 200, Quantity demanded = 110, Surplus = 90.
To find the equilibrium price and quantity, we set the quantity supplied equal to the quantity demanded:
2P = 300 - P
Combining like terms, we get:
3P = 300
Dividing both sides by 3, we find:
P = 100
Substituting the equilibrium price back into either the supply or demand equation, we can find the equilibrium quantity:
Q = 300 - P = 300 - 100 = 200
Therefore, the equilibrium price is $100 and the equilibrium quantity is 200.
If a price ceiling of $90 is imposed, it is below the equilibrium price. This will create a shortage in the market. The price will be $90, the quantity supplied will be 180 (calculated by substituting P = $90 into the supply equation QS = 2P), the quantity demanded will be 210 (calculated by substituting P = $90 into the demand equation QD = 300 - P), and the size of the shortage will be 30 (quantity demanded minus quantity supplied).
If a price floor of $90 is imposed, it is above the equilibrium price. This will create a surplus in the market. The price will still be $100 (the equilibrium price), the quantity supplied will be 200 (equilibrium quantity), the quantity demanded will be 110 (calculated by substituting P = $90 into the demand equation QD = 300 - P), and the size of the surplus will be 90 (quantity supplied minus quantity demanded).
If a tax of $30 is levied on producers, the supply curve shifts upward by that amount. The new supply equation becomes QS = 2(P - 30). This will create a surplus in the market. The price will increase to $130 ($100 equilibrium price + $30 tax), the quantity supplied will be 200 (equilibrium quantity), the quantity demanded will still be 110 (calculated by substituting P = $130 into the demand equation QD = 300 - P), and the size of the surplus will be 90 (quantity supplied minus quantity demanded).
To know more about demand curves, here
https://brainly.com/question/13131242
#SPJ4
A typical family on Sandy Island consumes only juice and cloth. Last year, which was the base year, the family spent $12 on juice and $30 on cloth. In the base year, juice was $3 a bottle and cloth was $6 a length.This year, juice is $2 a bottle and cloth is $3 a length. Calculate
a. The CPI basket.
b. The CPI in the current year.
c. The inflation rate in the current year.
a) The CPI basket consists of 4 bottles of juice and 5 lengths of cloth. b) The CPI in the current year is approximately 54.76. c) The inflation rate in the current year is approximately -45.24%.
To calculate the Consumer Price Index (CPI), we need to follow these steps:
Calculate the CPI basket;
The CPI basket consists of the quantities and prices of goods and services consumed by a typical family. In this case, the family only consumes juice and cloth.
For the base year;
Juice quantity = $12 (expenditure on juice) / $3 (price per bottle) = 4 bottles
Cloth quantity = $30 (expenditure on cloth) / $6 (price per length) = 5 lengths
So, the CPI basket for the base year consists of 4 bottles of juice and 5 lengths of cloth.
Calculate the CPI in the current year;
To calculate the CPI in the current year, we compare the prices of the CPI basket items in the current year to the base year.
Juice price in the current year = $2 (price per bottle)
Cloth price in the current year = $3 (price per length)
For the current year;
Juice expenditure = 4 bottles × $2 (price per bottle) = $8
Cloth expenditure = 5 lengths × $3 (price per length) = $15
Total expenditure in the current year = $8 + $15 = $23
CPI in the current year = (Total expenditure in the current year / Total expenditure in the base year) × 100
CPI in the current year = ($23 / $42) × 100 ≈ 54.76
Calculate the inflation rate in current year;
The inflation rate measures the percentage change in the CPI from the base year to the current year.
Inflation rate = (CPI in the current year - CPI in the base year) / CPI in the base year × 100
Inflation rate = (54.76 - 100) / 100 × 100 ≈ -45.24%
Therefore, The CPI basket consists of 4 bottles of juice and 5 lengths of cloth. The CPI in the current year is approximately 54.76, and the inflation rate in the current year is approximately -45.24%.
To know more about inflation rate here
https://brainly.com/question/31635911
#SPJ4
Garage, Inc., has identified the following 2 mutually exclusive projects:
Year Cash Flow A Cash Flow B
0 -$43,000 $-43,500
1 $21,400 $6,400
2 $18,500 $14,700
3 $13,800 $22,800
4 $7,600 $25,200
What is the IRR for each of these projects? Using the IRR decision rule, which project should the company accept? Is this decision necessarily correct?
If the required return is more than 11%, what is the NPV for each of these projects? Which project will the company choose if it applies the NPV decision rule?
Over what range of discount rates would the company choose project A? Project B? At what discount rate would the company be indifferent between these 2 projects? Explain.
Based on the IRR and NPV decision rules, the company should choose Project B over Project A as it has a higher IRR and NPV. Project B remains the preferred choice across all discount rates.
Using a financial calculator or spreadsheet software, we can find the IRR for Project A is approximately 13.42%, and for Project B is approximately 18.15%. According to the IRR decision rule, the company should accept the project with the highest IRR. In this case, the company should choose Project B, as it has a higher IRR.
However, the IRR decision rule assumes that cash flows will be reinvested at the project's internal rate of return, which may not always be realistic. Therefore, the decision based solely on IRR may not always be correct.
If the required return is more than 11%, we can calculate the NPV for each project by discounting the cash flows using the required return rate. For Project A, assuming a required return of 11%, the NPV is approximately $3,010.47. For Project B, assuming a required return of 11%, the NPV is approximately $4,373.38.
According to the NPV decision rule, the company should choose the project with the highest positive NPV. In this case, the company should choose Project B. The company would choose Project A over the range of discount rates where its NPV remains positive, which is below approximately 18.15%. Project B would be chosen over the entire range of discount rates.
The discount rate at which the company would be indifferent between the two projects is the discount rate where their NPVs are equal, which occurs at approximately 18.15%. At this discount rate, the NPV of both projects is zero, indicating that they have the same value to the company.
To know more about discount rates, here
https://brainly.com/question/13660799
#SPJ4