please fill in the blank and don’t send me files i can’t open them!!

A change order is a documented change to the scope, schedule, or contract terms of a project. It is typically used when there is a need to modify the original project plan.

Whether rerouting the pipeline between points A and B can be done with a change order depends on the specifics of the contract and the change management process in place for the project.

In general, if the contract allows for changes to the scope or route of the pipeline, and if the change falls within the scope of the contract's change management provisions, it may be possible to implement the rerouting through a change order. The change order would document the agreed-upon modifications and any associated impacts, such as cost, schedule, or other contractual terms.

However, it's important to note that the ability to make changes through a change order ultimately depends on the contractual agreements, project management processes, and any applicable regulations or requirements. It is recommended to consult the specific contract and project stakeholders to determine the appropriate course of action for rerouting the pipeline.

learn more about project plan here

https://brainly.com/question/30077155

#SPJ11

Answer:

storyboard!!!

Explanation:

its important to have the concept in mind before starting

Answer:

1940 – 1956: First Generation – Vacuum Tubes. These early computers used vacuum tubes as circuitry and magnetic drums for memory. ...

1956 – 1963: Second Generation – Transistors. ...

1964 – 1971: Third Generation – Integrated Circuits. 1972 – 2010: Fourth Generation – Microprocessors.

Here is the C program that will take ten real numbers from the user and store them in an array, followed by the calculation of the sum of the numbers, the mean, the minimum value, the maximum value, the number of zero values, the median, and the mode:#include #include #include int main() {float num[10], temp;int i, j, freq[10], zeroCount = 0;float sum = 0, mean = 0, median = 0, max = 0, min = 0, mode = 0;for (i = 0; i < 10; i++) {printf("Enter number %d: ", i + 1);scanf("%f", &num[i]);sum += num[i];if (num[i] == 0)zeroCount++;for (j = 0; j < i; j++) {if (num[i] == num[j])freq[i]++;}freq[i] += 1;}mean = sum / 10;for (i = 0; i < 9; i++) {for (j = i + 1; j < 10; j++) {if (num[i] > num[j]) {temp = num[i];num[i] = num[j];num[j] = temp;}}}min = num[0];max = num[9];if (num[4] == 0) {median = (num[3] + num[4]) / 2;} else {median = num[4];}int maxFreq = freq[0];for (i = 0; i < 10; i++) {if (freq[i] > maxFreq) {maxFreq = freq[i];mode = num[i];}}printf("The sum of the numbers is: %.2f\n", sum);printf("The mean of the numbers is: %.2f\n", mean);printf("The minimum value is: %.2f\n", min);printf("The maximum value is: %.2f\n", max);printf("The number of zero values is: %d\n", zeroCount);printf("The median is: %.2f\n", median);printf("The mode is: %.2f\n", mode);return 0;}

In this code, we first take 10 real numbers from the user and store them in an array. Then, we calculate the sum of the numbers by iterating over the array, and store it in the variable sum. We also count the number of zero values by iterating over the array and incrementing a counter every time we encounter a zero. Next, we calculate the mean of the numbers by dividing the sum by 10. To find the minimum and maximum values in the array, we sort the array in ascending order and store the first and last elements in the variables min and max, respectively.To calculate the median, we first check if the middle element in the sorted array is zero. If it is, then we take the average of the middle two elements as the median. Otherwise, we take the middle element itself as the median.To calculate the mode, we use a frequency array freq that stores the frequency of each element in the input array. We iterate over the input array, and for each element, we increment the frequency of that element in the frequency array. Finally, we iterate over the frequency array to find the element with the maximum frequency, which is the mode.

Know more about C program here:

https://brainly.com/question/30905580

#SPJ11

Digital libraries of the AITP and IEEE professional societies are important sources of unbiased technology information.

A digital library is a collection of electronically accessible digital artifacts like books, magazines, audio and video recordings, and other materials.

Digital libraries are websites dedicated to building and maintaining collections of electronic books and other types of content without requiring end users to pay for the items they wish to peruse and read.

Learn more about libraries at;

https://brainly.com/question/30367015

#SPJ4

Answer: False

Explanation:

There are a number of ways to insert blank columns or rows in spreadsheet program e like Microsoft excel. The method referred to above, which is using the insert option in the home tab. In Microsoft Excel 2016, once the insert option is chosen, there is an option to insert cells, insert sheet rows, insert sheet columns and insert sheets. Click on the insert sheet columns, a new column is automatically right before the location of the current selected cell. There is no dialog box which pops up to enable user specify the location of the new column when using this column addition option.

The examples of the Defense In-Depth principle from the given options are:

b) Network segmentation: Network segmentation involves dividing a network into smaller subnetworks or segments, typically using firewalls or routers, to restrict the movement of unauthorized users and limit the potential impact of a security breach.

c) Multi-factor authentication: Multi-factor authentication requires users to provide multiple forms of verification, such as a password, a fingerprint, or a unique code sent to their mobile device. This adds an extra layer of security by verifying the user's identity through multiple means.

e) Run an application in a sandbox inside a virtual machine: Running an application in a sandbox environment, which is isolated from the underlying system, helps prevent malicious activities or unauthorized access to sensitive resources. Using virtual machines adds an extra layer of protection by creating a separate and secure environment for running applications.

So, the options b), c), and e) are examples of the Defense In-Depth principle.

learn more about Defense In-Depth here

https://brainly.com/question/29844346

#SPJ11

No, additional infrastructure is not required if the wall ports have been properly cabled to a patch panel.

When wall ports are connected to a patch panel, it creates a centralized location for network connections. The patch panel acts as an intermediary between the wall ports and the networking equipment, such as switches or routers. It allows for easier management, organization, and maintenance of network connections.

By cabling the wall ports to a patch panel, the network installation team ensures that the physical connectivity is established correctly. Once the connections are made, the networking equipment can be connected to the patch panel, enabling communication between devices on the network. As long as the patch panel is properly installed and functioning, no additional infrastructure is required for the network installation.

You can learn more about patch panel at

https://brainly.com/question/31131663

#SPJ11

Here's the Python code for the above algorithm:```
def string_match(a, b):
   count = 0
   for i in range(min(len(a), len(b))-1):
       if a[i:i+2] == b[i:i+2]:
           count += 1
   return count
```Thus, the above Python function will return the number of positions where both strings contain the same length 2 substring.

Given 2 strings, a and b, we are to return the number of the positions where they contain the same length 2 substring. We can solve this problem using the following steps:

Step 1: We'll start by defining a function named "string_match".

Step 2: The function will take two string arguments named "a" and "b".

Step 3: We'll create a variable named "count" and initialize it to zero. This variable will be used to keep track of the number of positions where both strings contain the same length 2 substring.

Step 4: We'll iterate over the range of the length of the strings "a" and "b". The range will be calculated as min(len(a), len(b))-1. We subtract 1 from the length of the strings to ensure we don't get an index error in the loop.

Step 5: For each iteration, we'll get the length 2 substring for both strings. If both substrings are the same, we'll increment the "count" variable by 1.

Step 6: After the loop, we'll return the "count" variable which will contain the number of positions where both strings contain the same length 2 substring.

Know more about Python here:

https://brainly.com/question/30391554

#SPJ11

Answer:

D- It simplifies common tasks into one-step commands.

Explination:

Edg 2021

Answer:

they are correct, its D

Explanation:

To register the textSize event handler for the textarea tag, you need to assign the function textSize to the onblur event of the textarea element. This function counts the number of characters in the textarea and updates the corresponding element's content.

To register the textSize event handler, you first need to obtain a reference to the textarea element using its id. In this case, the id is "studentName", so you can use document.getElementById("studentName") to retrieve the textarea element and assign it to the textareaElement variable.

Next, you define the textSize function, which takes an event parameter. Within the function, you access the value of the textarea using event.target.value.length, which gives the length of the text entered in the textarea. This value is then assigned to the inner HTML property of the element with the id "stringLength". This element is where the character count will be displayed.

Finally, to register the event handler, you assign the textSize function to the onblur event of the textarea element. This ensures that the textSize function is called whenever the textarea loses focus (i.e., when the user clicks outside the textarea or tabs away from it).

Learn more about HTML here:

https://brainly.com/question/24065854

#SPJ11

Among the options provided, tailgating is a social engineering technique where an unauthorized person follows someone with legitimate access to gain entry into a restricted area.

Social engineering refers to the manipulation of individuals to deceive them into performing actions or divulging sensitive information.

Pretexting involves creating a false scenario or pretext to manipulate individuals into disclosing information or performing actions they would not normally do. Vishing is a social engineering technique that uses voice communication, typically over phone calls, to deceive individuals into revealing sensitive information. Smishing, on the other hand, refers to the act of using SMS or text messages to trick individuals into divulging personal information or performing certain actions.

Piggybacking, the remaining option, does not fall under the category of social engineering. It refers to the act of unauthorized individuals gaining physical access to a restricted area by closely following an authorized person without their knowledge. While piggybacking involves unauthorized access, it does not involve the manipulation or deception of individuals, which is a characteristic of social engineering techniques.

learn more about social engineering technique here:

https://brainly.com/question/31021547

#SPJ11

The given method that intends to remove all even elements from the parameter list is incorrect. The condition in the if statement to test whether an element is even is incorrect, and some elements are skipped as the indexes of all subsequent elements change by one when a list element is removed.

The given method has incorrect logic to remove even elements from the given list. In the code segment, the condition in the if statement to test whether an element is even is incorrect, so it removes the wrong elements of the list. On the other hand, some elements are skipped because the indexes of all subsequent elements change by one when a list element is removed. To remove all even elements, the correct code should use the modulus operator (%) that returns the remainder of the division between two numbers. If the remainder is zero, it means the number is even, and it should be removed.

Know more about if statement here

https://brainly.com/question/30779717

#SPJ11

he correct answer is D and E.

Given the declaration of the pointer int* ptr[4], we have to identify the statements that can be used to delete the dynamically allocated memory associated with ptr.

As ptr is an array of 4 integer pointers, we have to deallocate the memory for each of the pointers.The delete statement is used to deallocate the dynamically allocated memory.

Syntax: delete pointer_variable; The delete [] statement is used to deallocate the dynamically allocated memory of an array.

Syntax: delete [] pointer_variable;

Therefore, the following statements can be used to delete the dynamically allocated memory associated with ptr:

for(int i=0; i<4; i++) delete ptr[i];

for(int i=0; i<4; i++) delete [] ptr[i];

Thus, the correct options are:Option D: for(int i=0; i<4; i++) delete ptr[i];Option E: for(int i=0; i<4; i++) delete [] ptr[i];Therefore, the correct answer is D and E.

Learn more about Dynamic Memory Allocation here:

https://brainly.com/question/31832545

#SPJ11

To determine whether the given credit card numbers are valid, we can use the Luhn algorithm, also known as the modulus 10 algorithm. The algorithm verifies the legitimacy of a credit card number based on a checksum calculation.

1. 4417-5486-1785-641: Invalid. The last digit should be a 5, not a 1.

2. 5591-4912-7644-1105: Invalid. The last digit should be a 0, not a 5.

3. 6011-0408-9477-3158: Valid. The last digit is consistent with the Luhn algorithm.

4. 3715-5487-3184-4663: Invalid. The last digit should be a 5, not a 3.

5. 4274-3156-0372-5492: Valid. The last digit is consistent with the Luhn algorithm.

6. 5164-8295-1229-3674: Invalid. The last digit should be a 9, not a 4.

7. 6011-4988-1002-6487: Valid. The last digit is consistent with the Luhn algorithm.

8. 4896-4198-8760-1970: Valid. The last digit is consistent with the Luhn algorithm.

9. 3401-7143-3912-04: Invalid. The last digit should be a 7, not a 4.

10. 5229-4203, 5061-5465: Invalid. The provided credit card numbers are incomplete or contain separators, making them invalid.

In summary, credit card numbers 3, 5, 7, and 8 are valid according to the Luhn algorithm. The rest of the numbers are invalid either due to incorrect last digits or incomplete/invalid formatting.

For more questions on Luhn algorithm, click on:

https://brainly.com/question/29549862

#SPJ8

Answer:

NO BUT IT SOUNDS FUN

Explanation:

I PROBABLY HAVE NOT HEARD OF IF BC IM HOMESCHOOLED :D

Answer:

No

Explanation:

Hope you have a wonderful rest of your day!!! :)

Given an array of non-negative integers, perform a series of operations until the array becomes empty. Each of the operations gives a score, and the goal is to maximize the overall score, the sum of the scores from all operations on the array.The given Java code implements the algorithm to calculate the maximum score for the given input array.

The algorithm first calculates the maximum score for the given array with an odd length and then for an even length. The difference between both scores is then added to the sum score. The first and last indices of the array are then removed one-by-one and the sum of the removed value and the current sum score is calculated.

This step is repeated until the array becomes empty. The code outputs the maximum score achieved at the end of this process.For the array [3,3,3], the array length is odd. Therefore, the maximum score for this array would be the sum of all values in the array, which is 3+3+3=9. The sumO variable stores this score.

To know more about integers visit:

https://brainly.com/question/490943

#SPJ11

To scale a given matrix B to a matrix C whose columns are probability vectors, you can follow these steps in a Live Script.

The following are the steps the define Matrix B and C and write the command in a live script:

Here is an example implementation in a Live Script:

//Find the code in the attached picture to run it in matlab editor.

The output will be the scaled matrix C, where each column is a probability vector, and the column sums of matrix C, which should be equal to 1, indicating that each column sums to 1.

The output of the commands in live script is given below:

Scaled matrix C:

0.3750 0.1538 0.5000

0.1250 0.4615 0.3333

0.5000 0.3846 0.1667

Column sums of matrix C:

1.0000 1.0000 1.0000

You can learn more about scaling matrices at

https://brainly.com/question/30903102

#SPJ11

To design an algorithm that decides whether there is an ω-path on which the formula 23(yellow ∨ 3blue) holds, we can use a model checking approach.

Model checking is a formal verification technique used to determine whether a system (in this case, a path) satisfies a given property (the formula).

Here's an algorithm that performs the desired task:

Initialize an empty set of visited states.

Create a queue and enqueue the initial state (starting point of the path).

While the queue is not empty, do the following:

Dequeue a state from the queue.

Add the dequeued state to the visited set.

Check if the current state satisfies the formula 23(yellow ∨ 3blue). This involves examining the state to see if there is a path on which the formula holds. The formula 23(yellow ∨ 3blue) implies that there must be a sequence of at least two consecutive yellow states or a sequence of at least three consecutive blue states on the path.

If the formula is satisfied, return true, indicating the existence of an ω-path that satisfies the formula.

Generate all possible next states from the current state (following the path).

For each next state, check if it has already been visited. If not, enqueue the state for further exploration.

If the algorithm reaches this point, it means that there is no ω-path satisfying the formula 23(yellow ∨ 3blue). Return false.

This algorithm performs a breadth-first search (BFS) exploration of the states along the path. It keeps track of visited states to avoid revisiting the same state multiple times, ensuring termination when the path ends or repeats.

Note that the specific implementation details, such as how to represent states and transitions, may vary depending on the context and nature of the problem. The above algorithm provides a high-level overview of the approach to deciding the existence of an ω-path that satisfies the given formula.

Learn more about algorithm  here:

https://brainly.com/question/21172316

#SPJ11

The output of `System.out.println(b.size())` is `3`.Therefore, the correct option is (C) `3`.

The given code is given below: ArrayList< Integer > a = new ArrayList< Integer >();ArrayList b = a;a.add(new Integer(4));b.add(new Integer(5));a.add(new Integer(6));a.add(new Integer(7));System.out.println(b.size());The output of the above code is `3`.Explanation:Initially, we created two ArrayLists of type Integer. 'a' is an ArrayList of type Integer, and 'b' is an ArrayList.When we wrote `ArrayList b = a`, it means that both 'a' and 'b' are referring to the same ArrayList. So, any changes made to 'a' or 'b' will affect both.'a' ArrayList is then populated with Integer objects of 4, 6, and 7. But, before adding the Integer object 6 and 7 to ArrayList 'a', we added an Integer object 5 to ArrayList 'b'.This means that the Integer object 5 is added to the same ArrayList that 'a' is referencing. And, 'b' and 'a' both are referencing the same ArrayList. Therefore, the size of ArrayList 'b' is 3.

Know more about ArrayList here:

https://brainly.com/question/9561368

#SPJ11

Certainly! Here's a Java program that defines the `removeNonAlpha` method to remove all non-alphabetic characters from the given input string:

public class NonAlphaRemover {

   public static void main(String[] args) {

       String input = "-Hello, 1 world$!";

       String result = removeNonAlpha(input);

       System.out.println(result);

   }

   public static String removeNonAlpha(String userString) {

       StringBuilder stringBuilder = new StringBuilder();

       for (int i = 0; i < userString.length(); i++) {

           char c = userString.charAt(i);

           if (Character.isLetter(c)) {

               stringBuilder.append(c);

           }

       }

       return stringBuilder.toString();

   }

}

In this program, the `removeNonAlpha` method takes a string as a parameter (`userString`) and iterates over each character in the string. It checks if each character is a letter using the `Character.isLetter` method. If it's a letter, it appends it to a `StringBuilder` object. Finally, it returns the resulting string by converting the `StringBuilder` to a string using the `toString` method.

When you run this program, it will output:

Helloworld

This is the string with all non-alphabetic characters removed.

Learn more about Java here:

https://brainly.com/question/26803644

#SPJ11

Answer: yeah!

Explanation:

Have a good day!

When constructing the Ethernet datagram to send the packet from Router Y to Router Z, the destination MAC address should be Router Z's MAC address.

The destination MAC address in an Ethernet datagram specifies the intended recipient of the packet. In this case, as the packet is being sent from Router Y to Router Z, the destination MAC address should be set to Router Z's MAC address. This ensures that the packet is correctly routed to the intended destination.

The source MAC address, on the other hand, should be set to Router Y's MAC address, indicating the sender of the packet.

It's important to note that the MAC addresses of computers or other devices connected to the network, such as Computer 2 or Computer I, are not relevant in determining the destination MAC address when sending a packet between routers.

Learn more about MAC address here:

https://brainly.com/question/25937580

#SPJ11

Answer: Not evaluating the manufacturing process can lead to lower product quality, inefficiency, missed improvement opportunities, compliance issues, and hindered innovation.

Explanation: the lack of evaluation in the manufacturing process can result in decreased product quality, reduced efficiency, missed improvement opportunities, compliance issues, and hindered innovation.

To remain competitive and maintain high standards, it is essential for industries to regularly evaluate and optimize their manufacturing processes.

Extensions provide a means of adapting RBAC (Role-Based Access Control) to the specifics of administrative and security policies in an organization.

RBAC is a widely used access control model that manages user permissions based on roles. However, every organization may have its unique administrative and security policies that need to be accommodated within the RBAC framework. This is where extensions come into play. Extensions are additional features or modifications that can be added to the core RBAC model to tailor it to the specific needs and requirements of an organization.

These extensions could include custom rules, additional attributes, or specialized functions that align with the organization's administrative and security policies. By utilizing extensions, RBAC can be customized and adapted to effectively address the unique policies and requirements of an organization. Therefore, extensions provide a means of adapting RBAC to the specifics of administrative and security policies in an organization.

You can learn more about access control model at

https://brainly.com/question/29024108

#SPJ11

The statement "You can customize a report and even change the design of it." is True.

In many reporting tools and software, including Microsoft Excel, Microsoft Access, and specialized reporting software, you can customize reports and change their design.

These tools provide features and options to modify the layout, formatting, fonts, colors, and other visual elements of a report. Additionally, you can add headers, footers, logos, and other branding elements to personalize the report.

Customization options may also include filtering data, adding calculations, sorting, grouping, and applying various formatting styles.

These capabilities allow users to tailor reports to their specific needs, preferences, and branding requirements, enhancing the presentation and usability of the information being conveyed.

Therefore the statement is True.

To learn more about design: https://brainly.com/question/1020696

#SPJ11

The statement "power bi is a popular data visualization tool as data doesn't need to be sourced" is False.

Power BI is a business intelligence tool developed by Microsoft that offers interactive visualizations and business intelligence abilities with a simple-to-use interface. Power BI Desktop, Power BI Service, and Power BI Mobile are the three components of Power BI. Power BI supports a variety of data sources, including Excel spreadsheets, SharePoint lists, cloud services such as Salesforce, and even databases like SQL Server. This implies that data does, in fact, need to be sourced for use with Power BI.As a result, data can be connected, transformed, and modeled using the Power BI Desktop app. The Power BI Service is a cloud-based solution that allows you to share dashboards and reports, and interact with the dashboards on any device with an internet connection. Power BI Mobile is a mobile app that allows you to access and share dashboards and reports from any device with an internet connection.Power BI has become a popular data visualization tool due to its ability to combine data from various sources, create interactive reports and dashboards, and share them with others. Additionally, it offers machine learning and artificial intelligence capabilities, making it a comprehensive business intelligence solution.

Learn more about Power Bi here:

https://brainly.com/question/30400118

#SPJ11

True, Java programming language uses both statements and expressions.The two fundamental elements of Java are expressions and statements.

Statements include conditional branching, loops, and other control flow constructs.Expressions are building blocks that describe computations.Java, as a programming language, makes a distinction between statements and expressions. While a statement is used to perform an action or a task, an expression is used to compute or evaluate a value.Expressions provide a value. The expression statement can be used as a shortcut for the actual assignment. For example, an integer expression can be written in shorthand as x + = 2, which means the same as x = x + 2.Java has its own set of operators that can be used to make expressions. Some of them are arithmetical, some are comparative, and some are logical. The '+' operator can be used for string concatenation, in addition to the standard arithmetic addition operator.

Learn more about Java :

https://brainly.com/question/12978370

#SPJ11