Please help me!
1. Find the coordinates of the vertices of the feasible region. Next, Find the value for R for each vertex

2. Consider the feasible region in the xy-plane defined by the following linear equalities:
X>=0
Y>=0
X<=12
X + Y >= 4
-X + 2Y <= 14
A. Find the value of Q=70x+82y for each vertex
B. What are the minimum and maximum values of the function Q on the feasible region?

Answer:

10°

Step-by-step explanation:

The sum of the measures of the exterior angles of any polygon, one per vertex, is 360°.

x + 3x + 4x + 5x + 6x + 8x + 9x = 360

36x = 360

x = 10

In a polygon, an exterior angle is supplementary to its adjacent interior angle.

The smallest exterior angle is x, and x = 10.

Answer: 10°

Answer:

I believe if I just believe that you can work this out then you can do it thank you You are intelligent you can do this

Answer:

p = -8 6/35

Step-by-step explanation:

p/(1 6/7)=−4.4

To solve for p, multiply each side by 1 6/7

p/(1 6/7) * ( 1 6/7)=−4.4 *  (1 6/7)

p = - 4.4 * ( 1 6/7)

Change each number to fractions

p = -44/10 * 13/7

p = -286/35

Change to a mixed number

p = -8 6/35

The probability that there were at most three successes in a trial is approximately 0.9.

It looks like the histogram shows the probability mass function (PMF) for the number of successes in a trial. The PMF for a random variable gives the probability of each possible value of the random variable.

To find the probability that there were at most three successes in a trial, we need to add up the probabilities of 0, 1, 2, and 3 successes. From the histogram, it looks like the probabilities of these values are approximately 0.2, 0.4, 0.2, and 0.1, respectively. Adding these up, we get an approximate probability of 0.2 + 0.4 + 0.2 + 0.1 = 0.9.

Therefore, the probability that there were at most three successes in a trial is approximate $\boxed{0.9}$.

Learn more about Probability here:

https://brainly.com/question/25870256

#SPJ4

according to question,

given data.

h(x)=8x-3/4+5

then,

bro this is middle school work not college

The equation for the relationship between the number of cans of paint, x, and the total weight of the cans, y, in slope-intercept form is y = 6x + 0. This equation can be derived from the formula for the slope-intercept form of a line, y = mx + b, where m is the slope of the line and b is the y-intercept. In this case, since the weight of each can of paint is 6 pounds and there is no y-intercept (the line passes through the origin), the slope of the line is 6 and the y-intercept is 0.

A table of possible values for the number of cans of paint, x, and the total weight of the cans, y, based on this equation is shown below:

x (number of cans of paint) y (total weight of cans)

1 6

2 12

3 18

4 24

5 30

As the table shows, for each additional can of paint, the total weight of the cans increases by 6 pounds. This is because each can of paint weighs 6 pounds, and the weight of the cans is equal to the number of cans multiplied by the weight of each can.

Answer: y = 6x

Step-by-step explanation:

       For each can of paint (x) 6 pounds is added. This is represented as;

         y = 6x

       For the table of possible values, we will plug a value in for x, and then evaluate the function for y. See attached.

y = 6(1) = 6

y = 6(2) = 12

y = 6(3) = 18

Answer:

To solve a problem involving a whole number and a fraction, you can first convert the whole number to a fraction by writing it as a fraction with a denominator of 1. For example, if the whole number is 4, you can write it as the fraction 4/1.

Then, you can add or subtract the fractions as you would normally, making sure to find a common denominator if necessary. For example, suppose you want to add the whole number 4 and the fraction 3/5. You can first write 4 as the fraction 4/1, giving you:

4/1 + 3/5

To add these fractions, you need to find a common denominator. A common denominator for 1 and 5 is 5, so you can rewrite the fractions with denominators of 5:

4/1 = 20/5

3/5 = 3/5

Now you can add the fractions:

20/5 + 3/5 = 23/5

So the solution to the problem is 23/5.

If you need to multiply or divide the whole number and fraction, you can treat the whole number as a fraction with a denominator of 1 and then perform the multiplication or division as you would normally with fractions.

Step-by-step explanation:

The values of x, y and z are 24, 10 and 17 using the similar triangles properties and triangles sum properties.

A triangle in geometry is a three-sided polygon with three edges and three vertices. The fact that a triangle's internal angles add up to 180 degrees is its most crucial characteristic. This characteristic is known as the triangle's angle sum property.

Given that ΔHPS≅ΔCNF.

We can see that angle H in triangle HPS is obtuse whereas angle N in triangle CNF is obtuse so comparing this we get,

6x - 29 = 115

6x = 144

x = 24

Comparing angle C and angle P we get

4z - 32 = 36

4z = 68

z = 17

Now the remaining angle in trinagle CNF is angle F which is 3y - 1 as we know that sum of angles in a triangle is 180 and the angle C and N are 36 and 115 we can say that F  is  29

Now to find y we equalise it to 29

3y - 1 = 29

3y = 30

y = 10.

The values of x, y and z are 24, 10 and 17 using the similar triangles properties and triangles sum properties.

To know more about triangles, visit:

https://brainly.com/question/1058720

#SPJ1

Answer:

304

Step-by-step explanation:

To find the surface area of a rectangular prism with length 4, width 10, and height 8, you can use the formula 2 * (length * width + width * height + height * length).

Plugging in the given values, the surface area is equal to 2 * (4 * 10 + 10 * 8 + 8 * 4) = 2 * (40 + 80 + 32) = 2 * 152 = 304.

Answer: 304

Step-by-step explanation:

Division followed by simplification of mentioned rational function gives:

(x + 1)/(x + 4)

Factoring an algebraic expression specifically means writing a given expression as the product of its factors. These factors may be numbers, variables, or algebraic expressions.

1, 2, 6, and 12 are all divisors of 12 because they divide 12 equally. This is an important algebraic operation, which is used to simplify expressions, simplify fractions, and solve equations. This is also called algebraic factorization.

Factorization of x² + 2x - 3

x² + 3x - x - 3

(x² + 3x) - (x + 3)

x(x + 3) - 1(x + 3)

(x + 3)(x - 1)

Factorization of x² + 3x - 4

x² + 4x - x - 4

(x² + 4x) - (x + 4)

x(x + 4) - 1(x + 4)

(x + 4)(x - 1)

Factorization of x² - 2x - 3

x² - 3x + x - 3

(x² - 3x) + (x - 3)

x(x - 3) + 1(x - 3)

(x - 3)(x + 1)

Using identity, a² - b² = (a + b)(a - b)

x² - 9 = x² - 3²

x² - 3² = (x + 3)(x - 3)

Now, for the division:

(x² + 2x - 3)/(x² - 9) ÷ (x² + 3x - 4)/(x² - 2x - 3)

[(x + 3)(x - 1)/(x + 3)(x - 3)] ÷ [(x + 4)(x - 1)/(x - 3)(x + 1)]

By reciprocal of (x + 4)(x - 1)/(x - 3)(x + 1)

[(x + 3)(x - 1)/(x + 3)(x - 3)] × [(x - 3)(x + 1)/(x + 4)(x - 1)]

= (x + 1)/(x + 4)

To know more about factorization, visit:

https://brainly.com/question/9781037

#SPJ1

The line segment of length 3 1/2 is sketched with mid pint at -1 and attached

A line segment in geometry has two different points on it that define its boundaries.

A line segment is sometimes referred to as a section of a line that links two places. The difference between a line and a line segment is that a line has no endpoints and can go on forever in either direction.

The endpoints is important before a line can be defined as a line segment, however the midpoint will be essential in calculating for the endpoints

The mid point of the line is given to be -1

the other ends will be 3 1/2 /2

1.75

from -1 add and subtract 1.75 to get the endpoint's

-1 + 1.75 = 0.75

-1 - 1.75 = 2.75

each unit on the number line is 0.3333

to get 0.75 from 0 count two units to give 0.6667 then a bit more to get to 0.75

to get 2.75 from 2 count two strokes to get to 2.6667, then add a little more to get 2.75

Learn more about line segment at:

https://brainly.com/question/17374569

#SPJ1

Answer:

the mean (i.e. the average)

Step-by-step explanation:

There's no clear outlier or inconsistency therefore the mean should be used.

An example of a function that is discontinuous at one and only one point in its domain but is continuous at every other point is the function

This function is continuous at every point in its domain, which is the set of all real numbers (-infinity < x < infinity). However, at the point x = 0, the function is discontinuous.

At x = 0, the function f(x) = x^2 is equal to 0, but if we approach the point x = 0 from the left (x = -0.1, -0.01, etc.), the function is equal to a negative value (-0.01, -0.0001, etc.), and if we approach the point x = 0 from the right (x = 0.1, 0.01, etc.), the function is equal to a positive value (0.01, 0.0001, etc.). This means that the function is not continuous at the point x = 0, and is therefore discontinuous at this point.

The point of discontinuity in this example is an essential discontinuity, which means that it cannot be removed by redefining the function at that point. This is because the function f(x) = x^2 is defined differently for x < 0 and x > 0, and there is no way to redefine the function at x = 0 to make it continuous.

Learn more about Functions here:

https://brainly.com/question/25638609

#SPJ4

The critical value is -2.70

What is a null hypothesis?

Two alternatives being the same is the null hypothesis. The underlying assumption is that the observed difference is just the result of chance. It is feasible to estimate the probability that the null hypothesis is correct using statistical testing.

Here, we have

The objective of this experiment is to compare two compounds, designed to reduce braking distance, used in tire manufacturing to prove if the braking distance of SUVs equipped with tires made with compound 1 is shorter than the braking distance of SUVs equipped with tires made with compound 2.

So you have 2 independent populations, SUV's equipped with tires made using compound 1 and SUVs equipped with tires made using compound 2.

Two samples of 66 braking tests are made and the braking distance was measured each time, the study variables are determined as:

X₁: Braking distance of an SUV equipped with tires made with compound one.

Its sample mean is X[bar]₁= 41 feet

And the Standard deviation S₁= 12.1 feet

X₂: Braking distance of an SUV equipped with tires made with compound two.

Its sample mean is X[bar]₂= 46 feet

And the Standard deviation S₂= 9.0 feet

We don't have any information on the distribution of the study variables, nor the sample data to test it, but since both sample sizes are large enough n₁ and n₂ ≥ 30 we can apply the central limit theorem and approximate the distribution of both variables sample means to normal.

The researcher's hypothesis, as mentioned before, is that the braking distance using compound one is less than the distance obtained using compound 2, symbolically: μ₁ < μ₂

The statistical hypotheses are:

H₀: μ₁ ≥ μ₂

H₁: μ₁ < μ₂

α: 0.05

The statistic to use to compare these two populations is a pooled Z test

Z= {(X[bar]₁-X[bar]₂) - (μ₁ - μ₂)}/√S₁²/n₁+S₂²/n₂ ≈ N(0;1)

Z = {(41-46)-0}/√146.41/66+81/66

Z = -5/1.85

Z = -2.70

The rejection region of this hypothesis test is one-tailed to the right, so you'll reject the null hypothesis to small values of the statistic. The critical value for this test is:

Z(α) = Z(0.05) = -1.645

Decision rule:

If Z(H₀) ≥  -1.645, then you do not reject the null hypothesis.

If Z(H₀) < -1.645, then you reject the null hypothesis.

Since the statistic value is greater than the critical value, the decision is to not reject the null hypothesis.

At a 5% significance level, you can conclude that the average braking distance of SUVs equipped with tires manufactured used compound 1 is greater than the average braking distance of SUVs equipped with tires manufactured used compound 2.

Hence, the critical value is -2.70.

To learn more about the null hypothesis from the given link

https://brainly.com/question/13135308

#SPJ1

Answer:

Step-by-step explanation:

40k

By the Application of Prime factorization method the value of x is 48

what is Prime factorization method?

Writing all numbers as the product of primes is a procedure known as prime factorization. Consider the case of the number 20, for instance. We can divide that into two elements. Well, that's four times five, we can say. Furthermore, 5 is a prime number.

Solution:

HCF = ( X, 54 ) = 6

LCM = ( X, 54 ) = 432

a = x  b = 54

using property

a * b = LCM * HCF

54a = 6 * 432

   a  = (6 * 432) / 54

   a = 48

Hence the value of x is 48.

To learn more about Prime factorization method from the given link

https://brainly.com/question/18187355

#SPJ1

The rational expression that is equivalent to the expression f(x) = 4/(x - 3) is {x + 2/x - 3} • {4/x + 2}.

Given is the expression as follows -

f(x) = 4/(x - 3)

[A] -

{x - 3/x + 2} • {x + 2/4} = {x - 3/4}

[B] -

{x - 3}/{x + 2} / {4/x + 2} = {x - 3}/{x + 2} × {x + 2/4} = {x - 3/4}

[C] -

{x + 2/x - 3} • {4/x + 2} = {4/x - 3}

[D] -

{x + 2/x - 3} / {4/x + 2} = {(x + 2)²/ 4x - 3}

Therefore, the rational expression that is equivalent to the expression f(x) = 4/(x - 3) is {x + 2/x - 3} • {4/x + 2}.

To solve more questions on rational function, visit the link below -

https://brainly.com/question/16938502

#SPJ1

The area of the shape as shown in the diagram is 11.25 cm².

Area is the region occuppied by a plane shape.

To calculate the area of the shape, we use the formula below.

Formula:

Where:

From the diagram,

Given:

Substitute these question into equation 1

Hence, the area of the shape is 11.25 cm².

Learn more about area here: https://brainly.com/question/25292087

#SPJ1

Answer: the first one is 7/9 and the second one is option 2

Step-by-step explanation:

4+7 = 11

< or> = open dot

The distances that represent the percentages are given as follows:

A proportion is a fraction of a total amount, used along with the unit measures and basic arithmetic operations to obtain the desired measures in the context of a problem.

28m is 80% of the distance, hence 100% of the distance is obtained applying the proportion as follows:

0.8x = 28

x = 28/0.8

x = 35.

Then the distance that represents 20% of a rotation is calculated as follows:

0.2 x 35 = 7 meters.

The complete problem is given by the image shown at the end of the answer.

More can be learned about proportions at https://brainly.com/question/24372153

#SPJ1

A. By decreasing the base number the graph was affected vertically. A lower base number caused the graph to rise at a slower rate.

What is a logarithm function?

The logarithm is exponentiation's opposite function in mathematics. This indicates that the exponent to which b must be raised in order to obtain a number x is the logarithm of x to the base b. For instance, because 1000 = 10³, its logarithm in base 10 is 3, or log₁₀ 10³= 3.

Given function are

f(x) = log x and g(x) = log₃ x.

The rate of raise of the graph g(x) is more than that of the graph f(x).

To learn more about effect on the shape, click on below link:

https://brainly.com/question/11535686

#SPJ1

The quadratic equations, or the equations that are quadratic in form, for this problem is given as follows:

The degree of a function is given by the highest exponent that appears in the definition of the function.

A quadratic function is a function that has a degree of 2.

The standard format of a quadratic function is given as follows:

y = ax² + bx + c.

(in which the coefficient a must assume a value different of zero).

The quadratic function in this problem is given as follows:

6(2x + 4)² = 2x + 4 + 2.

As (2x + 4)² = 4x² + 16x + 16, meaning that the highest exponent would be of 2.

However, equations of the fourth degree can also be quadratic in form, as long as the exponents go as follows: 4, 2 and 0.

Hence these following equations are also quadratic in form:

They are classified as quadratic in form because a transformation such as y = x² can make them quadratic.

More can be learned about quadratic equations at https://brainly.com/question/24737967

#SPJ1

Answer:

--------------------------------

If the amount of sales for current week is x, Jamie's earning is:

Solve it for x:

The plane touches the runway with a speed of 65 m/s then the acceleration of the plane during its landing will be equal to 65 m/s².

The rate of change in an object's velocity concerning time is known as acceleration in mechanics. The vector quantity of accelerations. The direction of the net force that is acting on an object determines its acceleration.

Since acceleration has both a magnitude and a direction, it is a vector quantity. Velocity is a vector quantity as well. The definition of acceleration is the change in velocity vector over a time interval divided by the time interval.

As per the given information in the question,

Velocity, v = 65 m/s

Time, t = 1 sec.

Use the equation of acceleration,

a = v/t

a = 65/1

a = 65 m/s²

To know  more about acceleration:

https://brainly.com/question/12550364

#SPJ1

The cost of a 25-minute rental will be $92.00.

To find the amount a 25-minute rental would cost, we need to first determine the rate per minute and the flat fee. We can do this by setting up the following system of equations:

30 minutes x rate + flat fee = $110.50

40 minutes x rate + flat fee = $145

To solve this system of equations, we can multiply the first equation by 2 and subtract the second equation from it to eliminate the rate:

(30 minutes x 2) x rate + flat fee x 2 = 2 x $110.50

80 minutes x rate + flat fee x 2 = 2 x $110.50

Subtracting the second equation from the first equation, we get:

flat fee x 2 - flat fee x 2 = 2 x $110.50 - 2 x $145

flat fee x 2 - flat fee x 2 = -$34.50

Since the left side of the equation is equal to zero, we can divide both sides by 2 to solve for the flat fee:

flat fee - flat fee = -$34.50 / 2

flat fee - flat fee = -$17.25

Since the left side of the equation is also equal to zero, the flat fee must be zero.

We can now use either of the original equations to solve for the rate per minute. Using the first equation, we get:

30 minutes x rate + flat fee = $110.50

30 minutes x rate = $110.50

rate = $3.68

We can now use this rate to find the cost of a 25-minute rental:

25 minutes x $3.68 + flat fee = $92.00 (Since the flat fee is zero)

Thus, a rental of 25 minutes costs $92.00.

To learn more about numerical expression click here :

https://brainly.com/question/6037813

#SPJ1

Answer:

7x ( - x + 5 )

Step-by-step explanation:

- 7x² = 7x × - x

35x = 7x × 5

- 7x² + 35x = 7x ( - x + 5 )

You can quickly calculate the radius of a cylinder using an online calculator.

What is the radius of a cylinder with a capacity of 100 cubic units and a height of 5 units?

Solution:

The radius of a cylinder (r) is equal to (V / h).

= √(100 / π × 5)

= 2.523 units

As a result, a cylinder's radius is 2.523 units.

To Learn more About cylinder  refer to:

https://brainly.com/question/9554871

#SPJ1

Answer:

Step-by-step explanation:

its a

All the given three conditions are true for conducting a two proportion significance test.

To check the significance of two proportions, following conditions should be met

Hence, all the three conditions must be met to conduct a two-proportion significance test.

Learn more about two-proportion significance test here:

https://brainly.com/question/10677500

#SPJ12

Therefore, In  Optimistic Criterion  decision of cases : 300 and in Pessimistic Criterion decision of cases : 200

Probabilities can be written as percentages with a 0%–100% range or proportions with a 0–1 range. An event's probability is measured from 0 to 1, with 0 being the most unlikely scenario and 1 being the most likely. When an event's probability is 0.45 (45%), there are 45 percent (100) odds that it will happen.

Here,

a) Optimistic Criterion

Demand/#of  No. of cases

cases

100      $1,000 $900 $800

200     $800 $2,000 $1,900

300     $600 $1,800 $3,000

Maximum of

Column    $1,000 $2,000  $3,000

Maximum

Decision: 300 cases

b) Pessimistic Criterion

Demand/#of   No. of cases

cases

100      $1,000 $900 $800

200     $800 $2,000 $1,900

300     $600 $1,800 $3,000

Minimum Of

Column    $600  $900  $800

Maximin

Decision: 200 cases

Therefore in  Optimistic Criterion  decision of cases : 300 and in Pessimistic Criterion decision of cases : 200

To know more about probability , visit

brainly.com/question/11234923

#SPJ4