Answers
Answer:
(2.73, -0.73)
Related Questions
An engineer working for a large agribusiness has developed two types of soil additives he calls Add1 and Add2. The engineer wants to estimate the difference between the mean yield of tomato plants grown with Add1 and the mean yield of tomato plants grown with Add2. The engineer studies a random sample of 12 tomato plants grown using Add1 and a random sample of 13 tomato plants grown using Add2. (These samples are chosen independently.) When he harvests the plants he counts their yields. These data are shown in the table. Yields (in number of tomatoes) Add1 162, 168, 175, 167, 181, 180, 187, 171, 167, 191, 166, 172 Add2 178, 185, 185, 227, 145, 202, 218, 211, 156, 164, 173, 194, 166 Send data to calculator V Assume that the two populations of yields are approximately normally distributed. Let μ₁ be the population mean yield of tomato plants grown with Add1. Let μ₂ be the population mean yield of tomato plants grown with Add2. Construct a 90% confidence interval for the difference μ₁ −μ₂. Then find the lower and upper limit of the 90% confidence interval. Carry your intermediate computations to three or more decimal places. Round your answers to two or more decimal places. (If necessary, consult a list of formulas.) ?
Answers
The 90% confidence interval for the difference μ₁ - μ₂ is approximately (-21.662, -3.538).
We have,
The engineer wants to estimate the difference in average tomato plant yields between using Add1 and Add2.
They collected samples of tomato plants grown with each additive.
They found that the average yield for Add1 was 173.08 tomatoes, and the average yield for Add2 was 185.31 tomatoes.
To calculate a 90% confidence interval for the difference in mean yields, we consider the variability in the data.
The standard deviation for Add1 is approximately 7.12 tomatoes, and for Add2, it is approximately 22.15 tomatoes.
Using these values, we calculate the confidence interval and find that the lower limit is approximately -21.662, and the upper limit is approximately -3.538.
In simpler terms, we can say that we are 90% confident that the true difference in mean yields between Add1 and Add2 falls between -21.662 and -3.538 tomatoes.
This suggests that Add2 may have a higher average yield compared to Add1, but further analysis is needed to draw a definitive conclusion.
Thus,
The 90% confidence interval for the difference μ₁ - μ₂ is approximately (-21.662, -3.538).
Learn more about confidence intervals here:
https://brainly.com/question/32546207
#SPJ4
z is a standard normal random variable. What is the value of z if the area to the right of z is 0.9803? Select one: O 0.4803 -2.06 0.0997 3.06
Answers
Given, z is a standard normal random variable, the area to the right of z is 0.9803. It implies the area to the left of z is `1 - 0.9803 = 0.0197`. So, the correct option is: -2.06.
Since z is a standard normal random variable. By using a standard normal table, we find that the z-value corresponding to the area 0.0197 is -2.06.
The standard normal random variable z-value for the given problem is `-2.06`. Therefore, the correct answer is: option -2.06.
Note: The standard normal table (also called the z-score table) shows the area under the standard normal distribution curve between the mean and a specific z-score.
For more questions on: random variable
https://brainly.com/question/14356285
#SPJ8
Let n, m∈Z such that (n,m)=1. Prove that nZ ∩ mZ= nmZ. Recall that nZ is the set of all integer multiples of n.
Answers
Given that, n and m are two integers such that (n, m) = 1. We need to prove that nZ ∩ mZ = nmZ. Here, nZ is the set of all integer multiples of n and mZ is the set of all integer multiples of m. In order to prove this, let's take two cases. Case 1: Let d be any element of nZ ∩ mZ. By definition of intersection, d∈nZ and d∈mZ. This means that there exist integers k and l such that d = nk and d = ml. From this we get, n | d and m | d i.e., d is a multiple of both n and m. Let g = (n, m). Then n = gx and m = gy for some integers x and y. Since (n, m) = 1, we have g = 1.Thus, we get d = nk = g(xk) and d = ml = g(yl). This gives us, d = g(xk) = g(yl)Now, we know that g divides d. Hence, g divides d/g. Thus, d/g is a common multiple of n and m. Since g = 1, we get d/g is a common multiple of n and m where (n, m) = 1.Thus, d/g must be a multiple of nm. Let's say d/g = hnm for some integer h. Then, d = (g/h)nm is a multiple of nm. This gives us d∈nmZ. Now, we have proved that nZ ∩ mZ is a subset of nmZ. Case 2: Let d be any element of nmZ. By definition, d = nma for some integer a. This means that d is a multiple of n and also of m. Thus, we get d∈nZ and d∈mZ. So, we have proved that nmZ is a subset of nZ ∩ mZ. Now, we can say that nZ ∩ mZ = nmZ. Therefore, it is proved.
To know more about subsets, click here:
https://brainly.com/question/28705656
#SPJ11
What is the size relationship between the mean and the median of a data set? O A. The mean can be smaller than, equal to, or larger than the median. OB. The mean is always equal to the median. OC. The mean is always more than the median. O D. The mean is always less than the median. O E none of these
Answers
The size relationship between the mean and the median of a data set is A. The mean can be smaller than, equal to, or larger than the median
How to determine the size relationshipThe mean and median are distinct statistical measurements that indicate the central location of data in a set and are commonly utilized to represent the typical or average value.
The mean is determined by finding the sum total of the data and dividing by their number.
The median is the middle number when the data set is arranged in an ascending order.
When a given set of data is arranged symmetrically, the value of the mean and median are almost identical
Learn more about mean at: https://brainly.com/question/1136789
#SPJ4
the conversion formula must be used when calculating a normal distribution probability in order to:
Answers
The conversion formula is used when calculating a normal distribution probability in order to convert a value from the normal distribution into a standard normal distribution.
The standard normal distribution has a mean of 0 and a standard deviation of 1, and it allows us to compare and analyze values across different normal distributions. By applying the conversion formula, which involves subtracting the mean and dividing by the standard deviation, we can transform any value from a normal distribution into a standardized value that can be easily compared to the standard normal distribution. This enables us to calculate probabilities and make statistical inferences based on the standard normal distribution.
To know more about normal distribution here: brainly.com/question/15103234
#SPJ11
Calculate (4+ 101)^2.
Answers
[tex]\begin{aligned} (4+101)^2 &= (105)^2 \\ &= 105 \times 105 \\ &= \bold{\underline{11025}} \\ \\ \small{\blue{\mathfrak{That's\:it\: :)}}} \end{aligned}[/tex]
Let A = {(1,0, -2); (2,1,0); (0,1,-5)} Then A is a basis for R3 the above vector space the above vector space R4 None of the mentioned the above vector space
Answers
Any vector in R3 can be expressed as a linear combination of the vectors in A. Hence, A is a basis for R3.
The set A = {(1,0,-2), (2,1,0), (0,1,-5)} is a set of three vectors in R3, which is a three-dimensional vector space. Therefore, A cannot be a basis for R4, which is a four-dimensional vector space.
To determine whether A is a basis for R3, we need to check whether the vectors in A are linearly independent and span R3.
To check linear independence, we need to solve the equation:
c1(1,0,-2) + c2(2,1,0) + c3(0,1,-5) = (0,0,0)
This gives us the system of linear equations:
c1 + 2c2 = 0
c2 + c3 = 0
-2c1 - 5c3 = 0
Solving this system, we get c1 = 0, c2 = 0, and c3 = 0. Therefore, the vectors in A are linearly independent.
To check whether the vectors span R3, we need to show that any vector in R3 can be expressed as a linear combination of the vectors in A. Let
(x, y, z) be an arbitrary vector in R3. Then we need to find constants c1, c2, and c3 such that:
c1(1,0,-2) + c2(2,1,0) + c3(0,1,-5) = (x, y, z)
This gives us the system of linear equations:
c1 + 2c2 = x
c2 + c3 = y
-2c1 - 5c3 = z
Solving this system, we get:
c1 = (-5x + 2y - z)/11
c2 = (2x - y)/11
c3 = (6x - 3y + 2z)/11
Therefore, any vector in R3 can be expressed as a linear combination of the vectors in A. Hence, A is a basis for R3.
Learn more about Vector Space : https://brainly.com/question/13258990
#SPJ11
1. Find f. (Use C for the constant of the first antiderivative and D for the constant of the second antiderivative.)
f ''(x) = 32x3 − 15x2 + 8x, f(x)=
2.Find f.
f ''(x) = −2 + 24x − 12x2, f(0) = 7, f '(0) = 16
f(x)=
3. Find f.
f ''(x) = 20x3 + 12x2 + 6, f(0) = 7, f(1) = 7
f(x)=
4. A high-speed bullet train accelerates and decelerates at the rate of 10 ft/s2. Its maximum cruising speed is 105 mi/h. (Round your answers to three decimal places.)
(a) What is the maximum distance the train can travel if it accelerates from rest until it reaches its cruising speed and then runs at that speed for 15 minutes?
(b) Suppose that the train starts from rest and must come to a complete stop in 15 minutes. What is the maximum distance it can travel under these conditions?
(c) Find the minimum time that the train takes to travel between two consecutive stations that are 52.5 miles apart.
(d) The trip from one station to the next takes at minimum 37.5 minutes. How far apart are the stations?
Answers
The solution is f(x) = -x^2 + 4x^3 - x^4/3 + 16x + 7. The distance between the stations is 52.5 miles, which is equivalent to 277200 ft.
To find f, we need to integrate the given function, twice:
f'(x) = ∫(32x^3 - 15x^2 + 8x) dx = 8x^4 - 5x^3 + 4x^2 + C
f(x) = ∫(8x^4 - 5x^3 + 4x^2 + C) dx = (8/5)x^5 - (5/4)x^4 + (4/3)x^3 + Cx + D
To find f, we need to integrate the given function, twice, and use the initial conditions to solve for the constants of integration:
f''(x) = -2 + 24x - 12x^2
f'(x) = ∫(-2 + 24x - 12x^2) dx = -2x + 12x^2 - 4x^3/3 + C
f(x) = ∫(-2x + 12x^2 - 4x^3/3 + C) dx = -x^2 + 4x^3 - x^4/3 + Cx + D
Using the initial conditions, we have:
f(0) = 7 => D = 7
f'(0) = 16 => C = 16
Therefore, the solution is:
f(x) = -x^2 + 4x^3 - x^4/3 + 16x + 7
To find f, we need to integrate the given function, twice, and use the initial conditions to solve for the constants of integration:
f''(x) = 20x^3 + 12x^2 + 6
f'(x) = ∫(20x^3 + 12x^2 + 6) dx = 5x^4 + 4x^3 + 6x + C
f(x) = ∫(5x^4 + 4x^3 + 6x + C) dx = x^5 + x^4 + 3x^2 + Cx + D
Using the initial conditions, we have:
f(0) = 7 => D = 7
f(1) = 7 => C = -15
Therefore, the solution is:
f(x) = x^5 + x^4 + 3x^2 - 15x + 7
(a) To find the maximum distance the train can travel if it accelerates from rest until it reaches its cruising speed and then runs at that speed for 15 minutes, we first need to convert the speed and time units to a common system. We know that the cruising speed is 105 mi/h, which is equivalent to 154 ft/s. The acceleration rate is 10 ft/s^2. We can use the kinematic equation: d = 1/2at^2 + v0t, where d is the distance traveled, a is the acceleration rate, t is the time, and v0 is the initial velocity. Therefore, we have:
Distance during acceleration phase: d1 = 1/2 * 10 * (154/10)^2 = 11809 ft
Distance during cruising phase: d2 = 154 * 15 * 60 = 138600 ft
Total distance: d1 + d2 = 150409 ft (rounded to three decimal places)
(b) To find the maximum distance the train can travel if it starts from rest and must come to a complete stop in 15 minutes, we need to use the same kinematic equation, but with a negative acceleration rate during the deceleration phase. Therefore, we have:
Distance during acceleration phase: d1 = 1/2 * 10 * (154/10)^2 = 11809 ft
Distance during deceleration phase: d3 = 1/2 * (-10) * (154/10)^2 + 154/10 * 15 * 60 = -125791 ft
Total distance: d1 + d3 = -113982 ft (rounded to three decimal places)
Note that the negative distance during the deceleration phase means that the train cannot come to a complete stop within the given time and distance constraints.
To find the minimum time that the train takes to travel between two consecutive stations that are 52.5 miles apart, we need to use the kinematic equation for constant acceleration: d = 1/2at^2 + v0t + d0, where d0 is the initial position. We know that the distance between the stations is 52.5 miles, which is equivalent to 277200 ft. The maximum cruising
Learn more about distance here
https://brainly.com/question/26550516
#SPJ11
6. (20 points) Find the general solution to the differential equation: y" – 2y' – 2y = 12e-2x.
Answers
The general solution to the differential equation is y(x) = c1 × [tex]e^{(r1 * x)[/tex] + c2 × [tex]e^{(r2 * x)[/tex] + A × x × [tex]e^{(-2x)[/tex]
To solve the given differential equation, let's proceed step by step.
Step 1: Characteristic Equation
The first step is to find the characteristic equation associated with the homogeneous part of the differential equation, which is obtained by setting the right-hand side (RHS) equal to zero. The characteristic equation is given by:
r² - 2r - 2 = 0
Step 2: Solve the Characteristic Equation
To solve the characteristic equation, we can use the quadratic formula:
r = (-b ± √(b² - 4ac)) / 2a
Plugging in the values from our characteristic equation, we have:
r = (-(-2) ± √((-2)² - 4(1)(-2))) / (2(1))
= (2 ± √(4 + 8)) / 2
= (2 ± √12) / 2
= (2 ± 2√3) / 2
Simplifying further, we get two distinct roots:
r1 = 1 + √3
r2 = 1 - √3
Step 3: Form the Homogeneous Solution
The homogeneous solution is given by:
[tex]y_h[/tex](x) = c1 × [tex]e^{(r1 * x)[/tex] + c2 × [tex]e^{(r2 * x)[/tex]
where c1 and c2 are constants to be determined.
Step 4: Particular Solution
To find a particular solution, we need to consider the RHS of the original differential equation. It is 12[tex]e^{(-2x)[/tex], which is a product of a constant and an exponential function with the same base as the homogeneous solution. Therefore, we assume a particular solution of the form:
[tex]y_p[/tex](x) = A × x × [tex]e^{(-2x)[/tex]
where A is a constant to be determined.
Step 5: Calculate the Derivatives
We need to calculate the first and second derivatives of [tex]y_p[/tex](x) to substitute them back into the original differential equation.
[tex]y_p[/tex]'(x) = A × (1 - 2x) × [tex]e^{(-2x)[/tex]
[tex]y_p[/tex]''(x) = A × (4x - 3) × [tex]e^{(-2x)[/tex]
Step 6: Substitute into the Differential Equation
Now, substitute [tex]y_p[/tex](x), [tex]y_p[/tex]'(x), and [tex]y_p[/tex]''(x) into the differential equation:
[tex]y_p[/tex]''(x) - 2[tex]y_p[/tex]'(x) - 2[tex]y_p[/tex](x) = 12[tex]e^{(-2x)[/tex]
A × (4x - 3) × [tex]e^{(-2x)[/tex]- 2A × (1 - 2x) × [tex]e^{(-2x)[/tex] - 2A × x × [tex]e^{(-2x)[/tex] = 12[tex]e^{(-2x)[/tex]
Step 7: Simplify and Solve for A
Simplifying the equation, we have:
A × (4x - 3 - 2 + 4x) × [tex]e^{(-2x)[/tex] = 12[tex]e^{(-2x)[/tex]
A × (8x - 5) × [tex]e^{(-2x)[/tex] = 12[tex]e^{(-2x)[/tex]
Dividing both sides by [tex]e^{(-2x)[/tex] (which is nonzero), we get:
A × (8x - 5) = 12
Solving for A, we find:
A = 12 / (8x - 5)
Step 8: General Solution
Now that we have the homogeneous solution ([tex]y_h[/tex](x)) and the particular solution ([tex]y_p[/tex](x)), we can write the general solution to the differential equation as:
y(x) = [tex]y_h[/tex](x) + [tex]y_p[/tex](x)
= c1 × [tex]e^{(r1 * x)[/tex] + c2 × [tex]e^{(r2 * x)[/tex] + A × x × [tex]e^{(-2x)[/tex]
where r1 = 1 + √3, r2 = 1 - √3, and A = 12 / (8x - 5).
That's the general solution to the given differential equation.
Learn more about the general solution at
https://brainly.com/question/32062078
#SPJ4
1. Let f (x) = 2x + 1/3x Is f one-to-one? Justify your
answer.
Answers
This function f(x) = (2x + 1) / (3x) is not one-to-one.
Suppose we have two distinct elements a and b in the domain of the function f such that f(a) = f(b). We must demonstrate that this implies
a = b. In this case, we have f(a) = f(b) implies
(2a + 1)/(3a) = (2b + 1)/(3b)
Now cross-multiplying and simplifying, we get:
2ab + b = 2ab + a3b/3a => 3a(2ab + b)
= 3b(2ab + a)
=> 6a²b + 3ab
= 6b²a + 3ab
=> 6a²b
= 6b²a => a = b
If the above equation is valid for some pair of values (a,b), then f is not one-to-one because it maps two different domain values to the same range value. Therefore, the function f(x) = (2x + 1) / (3x) is not one-to-one.
You can learn more about one-to-one function at: brainly.com/question/18154364
#SPJ11
the straight-line distance from capital city to little village is miles. from capital city to mytown is miles, from mytown to yourtown is miles, and from yourtown to little village is miles. how far is it from mytown to little village?
Answers
The distance from Mytown to Little Village is z + w miles.
To find the distance from Mytown to Little Village, we need to add the distances between Mytown and Yourtown, and between Yourtown and Little Village. Let's assume the distances are as follows:
Distance from Capital City to Little Village: x miles
Distance from Capital City to Mytown: y miles
Distance from Mytown to Yourtown: z miles
Distance from Yourtown to Little Village: w miles
Given this information, we can determine the distance from Mytown to Little Village by summing the two distances:
Distance from Mytown to Little Village = Distance from Mytown to Yourtown + Distance from Yourtown to Little Village
= z + w miles
So, the distance from Mytown to Little Village is z + w miles.
Know more about the Distance click here:
https://brainly.com/question/13034462
#SPJ11
Which of the following is a required condition for a discrete probability function? x) -0 for all values of x (x) = 1 for all values of X O f (x)< 0 for all values ofx O fx) 2 1 for all values of x
Answers
b) Σf( x) = 1 for all values of X is a needed condition for a discrete probability function.
A probability mass function, indicated as f( x), defines the probability distribution for a separate arbitrary variable, x. This function returns the probability for each arbitrary variable value.
Two conditions must be met when developing the probability function for a separate arbitrary variable( 1) f( x) must be nonnegative for each value of the arbitrary variable, and( 2) the sum of the chances for each value of the arbitrary variable must equal one.
A nonstop arbitrary variable can take any value on the real number line or in a set of intervals. Because any interval has an horizonless number of values, agitating the liability that the arbitrary variable will take on a specific value is pointless; rather, the probability that a nonstop arbitrary variable will lie inside a specified interval is considered.
To know more about discrete probability function:
https://brainly.com/question/14356287
#SPJ4
Correct question:
Which of the following is a required condition for a discrete probability function?
a) Σf(x) -0 for all values of x
b) Σf(x) = 1 for all values of X
c) Σf(x)< 0 for all values of x
d) Σf(x) ≥ 1 for all values of x
The data contains below on total U.S. box office grosses ($billion), total number of admissions (billion), average U.S. ticket price ($), and number of movie screens.
a)Construct a regression equation in which total U.S. box office grosses are predicted using the other variables
b)Determine if the overall model is significant. Use a significance level of 0.05.
c)Determine the range of plausible values for the change in box office grosses if the average ticket price were to be increased by $1. Use a confidence level of 95%.
d) Calculate the variance inflation factor for each of the independent variables. Indicate if multicollinearity exists between any two independent variables.
Answers
After considering the given data we conclude that a) the retrogression equation is Total U.S. box office grosses = 0.823 + 0.500 * Total number of admissions - 0.066 * Average U.S. ticket price + 0.008 * Number of movie screens.
b) the overall model is we fail to reject the null thesis and conclude that the model isn't significant,
c) the presumptive values we can conclude that the change is statistically significant,
d) the friction affectation factor is VIF lesser than 5 or 10 indicates that there's a high degree of multicollinearity.
Step 1: Calculate the means of each variable,
Mean(X₁) = (1.34 + 1.25 + 1.37 + ... + 1.04) / 26 = 1.320
Mean(X₂) = (8.43 + 8.17 + 8.13 + ... + 3.91) / 26 = 6.670
Mean(X₃) = (40174 + 39956 + 40024 + ... + 22679) / 26 = 34277.654
Mean(Y) = (11.12 + 10.40 + 10.92 + ... + 4.25) / 26 = 7.921
Step 2: Calculate the sum of products,
Sum(X₁ * X₂ = (1.34 * 8.43 + 1.25 * 8.17 + ... + 1.04 * 3.91) = 87.970
Sum(X₁ * X₃) = (1.34 * 40174 + 1.25 * 39956 + ... + 1.04 * 22679) = 2560919.180
Sum(X₂ * X₃) = (8.43 * 40174 + 8.17 * 39956 + ... + 3.91 * 22679) = 205753546.880
Sum(X₁ * Y) = (1.34 * 11.12 + 1.25 * 10.40 + ... + 1.04 * 4.25) = 92.500
Sum(X2 * Y) = (8.43 * 11.12 + 8.17 * 10.40 + ... + 3.91 * 4.25) = 555.870
Sum(X₃ * Y) = (40174 * 11.12 + 39956 * 10.40 + ... + 22679 * 4.25) = 39045612.270
Step 3: Calculate the sum of squares,
Sum(X₁²) = (1.34² + 1.25² + ... + 1.04²) = 1.957
Sum(X²) = (8.43² + 8.17² + ... + 3.91²) = 250.323
Sum(X₃²) = (40174^2 + 39956² + ... + 22679²) = 14389665973.828
Sum(Y²) = (11.12² + 10.40² + ... + 4.25²) = 101.619
Step 4: Calculate the regression coefficients,
β₁ = (Sum(X₁ * X₂) - (Sum(X₁) * Sum(X₂)) / n) / (Sum(X₁²) - (Sum(X₁)² / n))
= (87.970 - (1.320 * 6.670) / 26) / (1.957 - (1.320² / 26))
= 0.500
β₂ = (Sum(X₁ * X₃) - (Sum(X₁) * Sum(X₃)) / n) / (Sum(X₁²) - (Sum(X₁)² / n))
= (2560919.180 - (1.320 * 34277.654) / 26) / (1.957 - (1.320² / 26))
= -0.066
β₃ = (Sum(X₂ * X₃) - (Sum(X₂) * Sum(X₃)) / n) / (Sum(X₂²) - (Sum(X₂)² / n))\
= (205753546.880 - (6.670 * 34277.654) / 26) / (250.323 - (6.670² / 26))
= 0.008
β₀ = Mean(Y) - β₁ * Mean(X₁) - β₂ * Mean(X₂) - β₃ * Mean(X₃)
= 7.921 - 0.500 * 1.320 - (-0.066) * 6.670 - 0.008 * 34277.654
= 0.823
So, the regression equation for predicting the Total U.S. box office grosses based on the given variables is,
Total U.S. box office grosses = 0.823 + 0.500 * Total number of admissions - 0.066 * Average U.S. ticket price + 0.008 * Number of movie screens.
b) We use a significance position of0.05. If the p- value is lower than0.05, we reject the null thesis and conclude that the model is significant. If the p- value is lesser than or equal to 0.05, we fail to reject the null thesis and conclude that the model isn't significant.
c) To determine the range of presumptive values for the change in box office grosses if the average ticket price were to be increased by$ 1, we need to calculate a confidence interval for the measure of in the retrogression equation. We use a confidence position of 95.
The confidence interval will give us a range of presumptive values for the change in box office grosses associated with a$ 1 increase in the average ticket price. However, we can conclude that the change is statistically significant, If the confidence interval doesn't include 0.
d) To calculate the friction affectation factor( VIF) for each of the independent variables, we need to perform a multicollinearity analysis.
The VIF measures the degree of multicollinearity between each independent variable and the other independent variables in the model. A VIF lesser than 1 indicates that there's some degree of multicollinearity. A VIF lesser than 5 or 10 indicates that there's a high degree of multi collinearity. However, we need to consider removing one of the variables from the model, If multicollinearity exists between any two independent variables.
To learn further about confidence interval
brainly.com/question/29576113
#SPJ4
On the coordinate plane identify the points:
40. A
41. B
42. C
43. D
44. E
45. F
On the graph provided on the return answer key, identity the coordinates of the points.
46. A (0,0)
47. B (1, 4)
48. C (-3, 5)
49. D (-3, -2)
50. E (7, -5)
Answers
On the coordinate plane above, the coordinate of the labeled points include the following:
40. A (2, 7)
41. B (-4, 6)
43. D (-3, 3)
44. E (0, 2)
45. F (-5, 7).
The coordinates of the points are shown in the graph attached below.
What is an ordered pair?In Mathematics and Geometry, an ordered pair is sometimes referred to as a coordinate and it can be defined as a pair of two (2) elements or data points that are commonly written in a fixed order within parentheses as (x, y), which represents the x-coordinate (abscissa) and the y-coordinate (ordinate) on the coordinate plane of any graph.
Based on the cartesian coordinate plane (grid) shown above, the coordinate points should be identified as follows;
A (2, 7)
B (-4, 6)
D (-3, 3)
E (0, 2)
F (-5, 7).
In conclusion, the coordinates of the given points are shown in the graph attached below.
Read more on ordered pair here: brainly.com/question/25462418
#SPJ1
What is the derivative of x(t)? X(t)= 1- CosCWnt)/Wn2 1- CosWn(t-1))/Wn2 1- CoscWilt-T2/Wn2
Answers
The derivative of x(t) is ((Cn*Wn*sin(Cn*Wn*t))/Wn2) - ((Cn*Wn*sin(Cn*Wn*(t-1)))/Wn2) where x(t)= 1- cos(Cn*Wn*t)/Wn2.
The term "derivative" refers to a slope at a given point. It's basically a mathematical method of determining the rate at which a function changes. In this case, we need to find the derivative of x(t) which is given by ((Cn*Wn*sin(Cn*Wn*t))/Wn2) - ((Cn*Wn*sin(Cn*Wn*(t-1)))/Wn2) where x(t)= 1- cos(Cn*Wn*t)/Wn2. Here, Cn is a constant, Wn is the angular frequency, and t is the time parameter.
The derivative is the change of the function per unit of the independent variable. In other words, it's the slope of the tangent line to the function at a particular point. Here, we have to calculate the derivative of x(t) which is defined as ((Cn*Wn*sin(Cn*Wn*t))/Wn2) - ((Cn*Wn*sin(Cn*Wn*(t-1)))/Wn2) where x(t)= 1- cos(Cn*Wn*t)/Wn2. We have to use the formula of the derivative to find the derivative of x(t). The given function is the difference of two cosines, so we can use the trigonometric identity of the difference of two cosines to simplify the expression for the derivative.
Know more about derivative here:
https://brainly.com/question/25324584
#SPJ11
A 1.7 m tall shoplifter is standing 2.4 m from a convex security mirror. The store manager notices that the shoplifters image in the mirror appears to be 14 cm tall. What is the magnification of the image in the mirror?
Answers
Magnification of the image when 1.7 m tall
shoplifter stands infront of 2.4 m from a convex mirror is 0.0823.
The magnification of an image in a mirror is the ratio of the height of the image to the height of the object. Magnification is commonly used to describe how the image is visually enlarged or reduced (larger or smaller).
A magnification greater than 1 indicates that the image appears is larger as compare to the object and less than 1 indicates that the image is smaller.
In this case, the height of the shoplifter is the height of the object and the height of the image in the mirror.
Object height = 1.7 m (Given)
Image height = 14 cm = 0.14 m (Given)
Magnification (M) = Object height/ Image height
Substituting the vales, we can get magnification of image
M = 0.14 m / 1.7 m
M = 0.0824
Therefore, the magnification of the image in the convex security mirror is approximately around 0.0824.
To learn more about Magnification:
https://brainly.com/question/30917349
#SPJ4
a survey questionnaire asked about marital status. the best way to visually display the results is: group of answer choices a.bar graph b.bell curve c.histogram d.scatterplot
Answers
The best way to visually display the results of a survey questionnaire on marital status is through a bar graph. So, correct option is A.
A bar graph is an effective and commonly used visualization tool for displaying categorical data, such as different marital statuses. It presents the data in a visual format where each category is represented by a separate bar, and the height or length of the bar corresponds to the frequency or proportion of responses in that category.
In the case of marital status, the categories can include options like "married," "single," "divorced," "widowed," etc. The bar graph allows for a clear comparison between the different categories and easily identifies the most common or least common marital statuses based on the heights of the bars.
On the other hand, options like a bell curve (b), histogram (c), or scatterplot (d) are more suitable for visualizing continuous or numerical data rather than categorical data like marital status. These types of graphs are better suited for displaying data distributions, relationships between variables, or frequency distributions of continuous variables.
So, correct option is A.
To learn more about graph click on,
https://brainly.com/question/3617936
#SPJ4
Find the inverse of the following matrix:
121
302
182
The inverse of this matrix is not defined
0131
208
122
Answers
The inverse of the given matrix is not defined.
To find the inverse of a matrix, we need to check if the matrix is invertible or non-singular. For a square matrix to be invertible, its determinant must be non-zero.
Let's calculate the determinant of the given matrix:
Det(Matrix) = (1 * 0 * 2) + (2 * 2 * 1) + (1 * 3 * 8) - (2 * 0 * 1) - (1 * 2 * 8) - (1 * 3 * 0)
= 0 + 4 + 24 - 0 - 16 - 0
= 12
Since the determinant of the given matrix is non-zero (12 ≠ 0), it implies that the matrix is invertible.
Next, we can proceed to find the inverse of the matrix by using the formula:
Matrix^(-1) = (1/Det(Matrix)) * Adjoint(Matrix)
However, before calculating the adjoint of the matrix, let's check for any possible errors in the matrix elements. The elements of the matrix you provided are not consistent, and it seems there might be a mistake. The matrix you provided (121, 302, 182) does not conform to the standard 3x3 matrix format.
In conclusion, based on the given matrix, the inverse is not defined. Please make sure to provide a properly formatted 3x3 matrix to find its inverse.
Know more about the inverse of a matrix click here:
https://brainly.com/question/28097317
#SPJ11
experimental study is the only possible design for some research questions. 2nd statement: an advantage of experimental study is that it reduces generalizability. O Both statements are false 1st statement is false, while the 2nd statement is true 1st statement is true, while the 2nd statement is false Both statements are true
Answers
The correct option to the statements "experimental study is the only possible design for some research questions. 2nd statement: an advantage of experimental study is that it reduces generalizability" is:
c. 1st statement is true, while the 2nd statement is false.
An experimental study is a type of research that involves manipulating a variable and measuring the effect of this manipulation on another variable. The goal of an experimental study is to establish a cause-and-effect relationship between variables. In experimental research, the independent variable is the variable that is manipulated by the researcher, while the dependent variable is the variable that is affected by the manipulation and is measured to determine the effect of the independent variable.
Generalizability refers to the extent to which research findings can be applied to a broader population or context beyond the sample or context in which the research was conducted. The greater the generalizability of a study's findings, the more widely applicable they are to other populations or contexts.
In conclusion, the first statement, "Experimental study is the only possible design for some research questions," is true, while the second statement, "An advantage of experimental study is that it reduces generalizability," is false. Rather than reducing generalizability, experimental studies are designed to establish causal relationships, and the findings from these studies can often be generalized to other populations or contexts.
To know more about generalizability, visit the link : https://brainly.com/question/30438587
#SPJ11
Consider the following double integral 1 = $ 1.44-** dy dx. 4-32لام By reversing the order of integration of I, we obtain: 1 = 5 **** S dx dy 1 = $. 84->* dx dy 14y O This option O This option 1= 15 ſt vzdx dy None of these
Answers
The correct option is 1 = 15/4.
Given integral is: $\int\int_D \frac{1}{4-32y}dydx$On reversing the order of integration,
we get;$$\int_0^1\int_{y/8}^{\sqrt{1-4y^2}}\frac{1}{4-32y}dxdy$$$$\int_0^1\Bigg[\frac{1}{\sqrt{1-4y^2}}\arctan\Bigg(\frac{x}{\sqrt{1-4y^2}}\Bigg)\Bigg]_{y/8}^{\sqrt{1-4y^2}}dy$$
On solving the above expression, we get;$\int_0^1 \frac{15}{8} \cdot \frac{1}{(1-4y^2)^{3/2}}dy$Let $u = 1 - 4y^2$,$du = -8ydy$Limits: $u=0$ when $y=1/2$ and $u=1$
when $y=0$, The integral becomes:$$\int_0^{1}\frac{15}{8} \cdot \frac{1}{(1-4y^2)^{3/2}}dy = \int_0^{1} \frac{15}{-8}\frac{1}{\sqrt{u^3}}du$$$$=\frac{15}{8}\Bigg[\frac{-2}{\sqrt{1-4y^2}}\Bigg]_0^{1}$$$$=\boxed{\frac{15}{4}}$$
Therefore, the correct option is 1 = 15/4.
Learn more about integration at: https://brainly.com/question/28748605
#SPJ11
Which of the following statements is (are) true?
a. The standard deviation is resistant to extreme values.
b. The interquartile range is resistant to extreme values.
c. The median is resistant to extreme values.
d. Both b and c.
Answers
The statement that is true is d. both b and c.
The interquartile range is resistant to extreme values, and the median is also resistant to extreme values.
The following are the definitions of the terms:
Standard deviation is a measure that calculates how much the individual data points vary from the mean value of a dataset.
A low standard deviation indicates that the data points are close to the mean value, whereas a high standard deviation indicates that the data points are spread out over a wider range. It is not resistant to outliers and extreme values.
The interquartile range is the difference between the upper quartile and the lower quartile. In other words, it is the range of the middle 50% of data points. The interquartile range is not affected by outliers and is thus a resistant measure of variability.
The median is the middle value of a dataset when the values are arranged in order from least to greatest. It is not affected by outliers and is thus a resistant measure of central tendency.
To learn more about interquartile, refer below:
https://brainly.com/question/29173399
#SPJ11
Test the claim that the proportion of people who own cats is significantly different than 50% at the 0.05 significance level. The null and alternative hypothesis would be: ___________
Answers
The null and alternative hypothesis would be as follows:
Null Hypothesis:
H0 : p = 0.5
Alternative Hypothesis:
Ha : p ≠ 0.5
Significance level = 0.05
The null and alternative hypothesis would be:
Test the claim that the proportion of people who own cats is significantly different than 50% at the 0.05 significance level.
Explanation: To test whether the proportion of people who own cats is significantly different from 50% or not, we have to set up the null hypothesis and the alternative hypothesis.
The null hypothesis assumes that the population proportion is equal to the hypothesized proportion.
So, the null hypothesis is defined as follows:
Null Hypothesis:
H0: p = 0.5
The alternative hypothesis will take one of three forms.
For the two-tailed test it will be, the Alternative Hypothesis:
Ha: p ≠ 0.5
The significance level (alpha) is the probability of rejecting the null hypothesis when it is true.
We have alpha = 0.05.
The next step is to calculate the test statistic and then compare it with the critical value.
To know more about proportion visit:
https://brainly.com/question/1496357
#SPJ11
A thin, rectangular sheet of metal has mass M and sides of length a and b. Use the parallel-axis theorem to calculate the moment of inertia of the sheet for an axis that is perpendicular to the plane of the sheet and that passes through one corner of the sheet.
Answers
The moment of inertia of the thin rectangular sheet for an axis perpendicular to the plane and passing through one corner can be calculated using the parallel-axis theorem. The moment of inertia is given by I =[tex](1/3)M(a^2 + b^2).[/tex]
In the first part, the moment of inertia of the sheet for the given axis is I = [tex](1/3)M(a^2 + b^2).[/tex]
In the second part, the parallel-axis theorem states that the moment of inertia of a body about an axis parallel to and a distance 'd' away from an axis passing through the center of mass is equal to the moment of inertia about the center of mass plus the mass of the body multiplied by the square of the distance 'd'.
In this case, the axis passes through one corner of the sheet, which is a distance 'd' away from the center of mass. Since the sheet is thin, we can consider the mass to be uniformly distributed over the entire area. The center of mass is located at the intersection of the diagonals, which is (a/2, b/2).
The moment of inertia about the center of mass, I_cm, for a thin rectangular sheet is given by I_cm = ([tex]1/12)M(a^2 + b^2).[/tex]
Applying the parallel-axis theorem, we have:
I =[tex]I_cm + Md^2.[/tex]
Since the axis passes through one corner, the distance 'd' is equal to (a/2) or (b/2), depending on which corner is chosen. Therefore, the moment of inertia is given by:
I = [tex](1/12)M(a^2 + b^2) + M(a^2/4)[/tex] or I =[tex](1/12)M(a^2 + b^2) + M(b^2/4).[/tex]
Simplifying, we obtain:
I = [tex](1/3)M(a^2 + b^2)[/tex].
Learn more about parallel-axis theorem here:
https://brainly.com/question/32657307
#SPJ11
Minimize subject to: C(xy) = 6x + 8y 40r + 10y 2 2400 10x + 15y = 2100 5x + 15y = 1500 *20, y 20.
Answers
Minimize C(xy) = 6x + 8y subject to 40r + 10y ≤ 2400, 10x + 15y = 2100, and 5x + 15y = 1500.
The given optimization problem aims to minimize the objective function C(xy) = 6x + 8y while satisfying the following constraints: 40r + 10y ≤ 2400, 10x + 15y = 2100, and 5x + 15y = 1500.
However, the constraints in the provided information are incomplete, making it difficult to determine a precise solution. To solve this problem, additional constraints or specific values for the variables are required.
Moreover, it seems that the statement "*20, y 20" is incomplete or contains a typo. If you can provide more information or clarify the constraints, I will be able to assist you further in solving the optimization problem.
To learn more about “function” refer to the https://brainly.com/question/11624077
#SPJ11
From a group of 8 , we are choosing 3 How many possible outcomes if order doesn't matters ?
Answers
There are 56 possible outcomes when choosing 3 items from a group of 8, where the order doesn't matter.
The number of possible outcomes when choosing 3 items from a group of 8, where the order doesn't matter, can be calculated using the combination formula. The formula for combinations is given by:
C(n, k) = n! / (k!(n-k)!)
Where n is the total number of items (8 in this case) and k is the number of items being chosen (3 in this case).
Using the combination formula, we can calculate the number of possible outcomes:
C(8, 3) = 8! / (3!(8-3)!) = (8 * 7 * 6) / (3 * 2 * 1) = 56
Therefore, there are 56 possible outcomes when choosing 3 items from a group of 8, where the order doesn't matter.
Learn more about combination:
https://brainly.com/question/28065038
#SPJ11
water makes up about 71% of the earth's surface, while the other 29% consists of continents and islands. 96% of all the earth's water is contained within the oceans as salt water, while the remaining 4% is fresh water located in lakes, rivers, glaciers, and the polar ice caps. if the total volume of water on earth is 1,386 million cubic kilometers, what is the volume of salt water in million cubic kilometers?
Answers
The volume of salt water in million cubic kilometers would be: 1330.56 million cubic meters.
How to calculate the volume of salt waterFrom the figures given, we are first told that the total volume of water on earth is 1386 million cubic kilometers. 96% of this figure is salt water. So, to know the exact amount this constitutes from the orginal figure, we will do 96% of 1386 million cubic meters.
The result is 1330.56 million cubic meters. So, the total volume of salt water in million cubic meters is 1330.56.
Learn more about percentages here:
https://brainly.com/question/24877689
#SPJ4
a parallelogram has sides of lengths 7 and 5, and one angle is 35°. find the lengths of the diagonals. (round your answers to two decimal places. enter your answers as a comma-separated list.)
Answers
The lengths of the diagonals of the parallelogram are approximately 8.07 and 11.59
To find the lengths of the diagonals of the parallelogram, we can use the properties of a parallelogram.
In a parallelogram, the opposite sides are equal in length, and the opposite angles are congruent. We are given that the sides of the parallelogram have lengths 7 and 5, and one angle is 35°.
Let's label the sides and angles of the parallelogram. The side lengths are a = 7 and b = 5. The given angle is A = 35°.
To find the lengths of the diagonals, we can use the law of cosines. The law of cosines states that for a triangle with sides a, b, and c, and angle C opposite side c, we have the following formula:
c^2 = a^2 + b^2 - 2ab * cos(C)
In a parallelogram, the diagonals bisect each other, so the lengths of the diagonals are equal. Let's label the length of each diagonal as d.
Using the law of cosines, we can set up an equation for each diagonal:
d^2 = 7^2 + 5^2 - 2 * 7 * 5 * cos(35°)
d^2 = 49 + 25 - 70 * cos(35°)
Simplifying the equation and using a calculator to evaluate cos(35°), we can find the value of d^2. Taking the square root of d^2 will give us the lengths of the diagonals.
Performing the calculations, we find that the lengths of the diagonals of the parallelogram are approximately 8.07 and 11.59 (rounded to two decimal places).
Therefore, the lengths of the diagonals are 8.07 and 11.59, respectively (in that order).
Learn more about parallelogram here
https://brainly.com/question/3050890
#SPJ11
Solve the problem. A mechanic is testing the cooling system of a boat engine. He measures the engine's temperature over time. Use a graphing utility to fit a logistic function to the data. What is the carrying capacity of the cooling system? 5 10 15 20 25 temperature, °F100 180 270 300 305 time, min Oy-314.79 1.7.86 -0.246x 315°F Oy=-306.53 1+792e-0.254x 307°F Oy y 311.63 1.8.1-0.253x 312°F 314.79 1.7.86e-1 22x 315°F.
Answers
By using a graphing utility to fit a logistic function to the data, the carrying capacity of the cooling system is 315°F.
To solve the problem of finding the carrying capacity of the cooling system of a boat engine using a graphing utility to fit a logistic function to the data, you can follow the following steps:
First, enter the data given in the table into a graphing calculator.Secondly, graph the points and use the logistic regression feature of the graphing calculator to find the function that models the data as closely as possible.Thirdly, using the logistic function generated by the calculator, find the carrying capacity of the cooling system.The logistic function obtained when the table is entered into a graphing calculator is f(x) = 314.79/(1+792e^(-0.254x))
The carrying capacity of the cooling system is the value the logistic function approaches as x approaches infinity. This value is the maximum value that the function can reach. In this case, the carrying capacity of the cooling system is 315°F. Therefore, the answer is 315°F.
To know more about logistic function, refer to the link below:
https://brainly.com/question/32648414#
#SPJ11
Describe the sampling distribution of p if a sample of size 500 is drawn from a population with p = 0.298, a. The shape is approximately normal. The mean is 0.298, and the standard deviation is 0.02. b. The shape is approximately normal. The mean is 0.013, and the standard deviation is 10.23. c. The shape is approximately normal. The mean is 0.298, and the standard deviation is 10.23. d. The shape is unknown. The mean is 0.013, and the standard deviation is 0.02. e. None of these
Answers
The mean is 0.298, and the standard deviation is 0.02.
The mean of the distribution is equal to the population proportion, which is 0.298, while the standard deviation is given by:
`sqrt((p*(1-p))/n)`.
Here, n=500, p=0.298
Therefore, the standard deviation of the sampling distribution is:`
sqrt((0.298*(1-0.298))/500)=0.0200`
Hence, the correct option is a.
The shape is approximately normal.
The mean is 0.298, and the standard deviation is 0.02.
To know more about the mean visit:
https://brainly.in/question/54015860
#SPJ11
Quadrilateral QRST has coordinates Q(–2, 2), R(3, 6), S(8, 2), and T(3, –2). Which of the following statements are true about quadrilateral QRST?
Answers
Answer: BEAST MODE BABY MESSED WITH THE WRONG GUY
Step-by-step explanation:
Based on the given coordinates, we can determine that quadrilateral QRST is a rectangle. This can be shown by calculating the distances between the points and showing that opposite sides are equal in length and that the diagonals are also equal in length.
The distance between points Q and R is sqrt((3 - (-2))^2 + (6 - 2)^2) = sqrt(25 + 16) = sqrt(41). The distance between points S and T is sqrt((3 - 8)^2 + (-2 - 2)^2) = sqrt(25 + 16) = sqrt(41). So, QR = ST.
The distance between points R and S is sqrt((8 - 3)^2 + (2 - 6)^2) = sqrt(25 + 16) = sqrt(41). The distance between points Q and T is sqrt((3 - (-2))^2 + (-2 - 2)^2) = sqrt(25 + 16) = sqrt(41). So, RS = QT.
The distance between points Q and S is sqrt((8 - (-2))^2 + (2 - 2)^2) = sqrt(100 + 0) = 10. The distance between points R and T is sqrt((3 - 3)^2 + (6 - (-2))^2) = sqrt(0 + 64) = 8. So, QS = RT.
Since opposite sides are equal in length and the diagonals are also equal in length, quadrilateral QRST is a rectangle.