Answer:
c
Step-by-step explanation:
find the area of this triangle
Work Shown:
area = 0.5*base*height
area = 0.5*11*13.4
area = 73.7 square cm
The other values 15 and 14 are not used. Your teacher probably put them in as a distraction.
The hypotenuse of a right triangle measures 6 cm and one of its legs measures 3 cm.
Find the measure of the other leg. If necessary, round to the nearest tenth.
Answer:
The measure of the other leg of the right triangle to the nearest tenth is equal to 5.2 cm.
What is the Pythagorean theorem?In mathematics, the Pythagorean theorem or Pythagoras theorem is a fundamental relation in Euclidean geometry between the three sides of a right triangle.
It states that the area of the square whose side is the hypotenuse (the side opposite the right angle) is equal to the sum of the areas of the squares on the other two sides.
Let the other leg of the right triangle be the opposite side.Given the following data:
Adjacent = 3 cmHypotenuse = 6 cmTo find the measure of the other leg, we would apply Pythagorean's theorem:
Mathematically, Pythagorean's theorem is given by the formula:
[tex]\sf Hypotenuse^2=opposite^2+adjacent^2[/tex]
Substituting the given parameters into the formula, we have:
[tex]\sf 6^2=opposite^2+3^2[/tex]
[tex]\sf 36=opposite^2+9[/tex]
[tex]\sf Opposite^2=36-9[/tex]
[tex]\sf Opposite^2=27[/tex]
[tex]\sf Opposite=\sqrt{27}[/tex]
[tex]\rightarrow \boxed{\boxed{\bold{Opposite = 5.19\thickapprox5.2 \ cm}}}[/tex]
Thus, the measure of the other leg of the right triangle to the nearest tenth is equal to 5.2 cm.
Learn more about the Pythagorean theorem at:
https://brainly.com/question/28361847
Find a basis for the eigenspace corresponding to each listed eigenvalue of A below. A = [2 -1 1 ]
[0 -3 -4]
[0 8 9], lambda = 2, 5, A basis for the eigenspace corresponding to lambda = 2 is
The basis for the eigenspace corresponding to the eigenvalue λ = 2 is {[1, 1, 0]}.
To find a basis for the eigenspace corresponding to the eigenvalue λ = 2, we need to solve the equation (A - λI)X = 0, where A is the given matrix, λ is the eigenvalue, X is the eigenvector, and I is the identity matrix.
Given matrix A:
[2 -1 1]
[0 -3 -4]
[0 8 9]
Eigenvalue: λ = 2
We subtract λI from A to get (A - λI):
[2 - 1 1]
[0 -3 -4]
[0 8 9] - 2 * [1 0 0]
[0 1 0]
[0 0 1]
Simplifying, we have:
[2 - 1 1]
[0 -3 -4]
[0 8 9] - [2 0 0]
[0 2 0]
[0 0 2]
= [0 -1 1]
[0 -5 -4]
[0 8 7]
Now we need to solve the equation (A - λI)X = 0 to find the eigenvectors.
Substituting λ = 2 into (A - λI), we have:
[0 -1 1]
[0 -5 -4]
[0 8 7]X = 0
To solve this homogeneous system of equations, we can use row reduction. We start with the augmented matrix:
[0 -1 1 0]
[0 -5 -4 0]
[0 8 7 0]
Performing row operations, we can obtain the row-echelon form:
[0 -1 1 0]
[0 0 -1 0]
[0 0 0 0]
From this, we can write the system of equations:
-x + y = 0 ---> x = y
-z = 0 ---> z = 0
0 = 0 ---> no restriction on any variable
In vector form, the eigenvectors can be expressed as:
X = [y, y, 0] = y[1, 1, 0]
This indicates that for any scalar value y, the vector [y, y, 0] is an eigenvector corresponding to the eigenvalue λ = 2.
Therefore, a basis for the eigenspace corresponding to λ = 2 is { [1, 1, 0] }.
In summary, the basis for the eigenspace corresponding to the eigenvalue λ = 2 is {[1, 1, 0]}.
Learn more about eigenspace here
https://brainly.com/question/31435694
#SPJ11
96 niños en un campamento de verano han de ser repartidos en varios grupos de modo que cada grupo tenga el mismo numero de niños. ¿de cuantas formas diferentes puede hacerse esto si cada grupo debe tener de 5 menos de 20 niños?
There are 4,377 different ways to distribute the 96 children into groups, with each group having a minimum of 5 children and a maximum of 20 children. (By division)
To determine the number of ways to distribute the 96 children into groups, we need to find the number of divisors of 96 that are between 5 and 20.
First, let's find the divisors of 96. The divisors of 96 are 1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, and 96.
Next, we need to consider the divisors that fall within the range of 5 to 20. In this case, the divisors are 6, 8, 12, and 16.
Now, we can calculate the number of ways to distribute the children into groups using the divisors:
For each divisor, we divide the total number of children (96) by the divisor to determine the number of groups.
Number of ways = Number of groups = Total number of children / Divisor
For the divisor 6: Number of groups = 96 / 6 = 16 groups
For the divisor 8: Number of groups = 96 / 8 = 12 groups
For the divisor 12: Number of groups = 96 / 12 = 8 groups
For the divisor 16: Number of groups = 96 / 16 = 6 groups
Finally, we sum up the number of ways for each divisor:
Number of ways = Number of ways for divisor 6 + Number of ways for divisor 8 + Number of ways for divisor 12 + Number of ways for divisor 16
= 16 + 12 + 8 + 6
= 42
Therefore, there are 42 different ways to distribute the 96 children into groups, with each group having a minimum of 5 children and a maximum of 20 children.
For more such questions on division, click on:
https://brainly.com/question/29347810
#SPJ8
Which pair of angles has congruent values for the sin x and the cos yº?
a.70;120
b.70;20
c.70;160
d.70;70
The option that represents the pair of angles that has congruent values for the sin x and the cos yº is: d. 70; 70.
Explanation:We know that sin of an angle is equal to the opposite side divided by the hypotenuse of the right triangle. Whereas, cos of an angle is equal to the adjacent side divided by the hypotenuse of the right triangle.Therefore, if two angles have congruent values for the sin x and the cos yº, then they must be the same angle in order to have same values for both sin and cos. That means the angle must be 70° as it is only mentioned in one option which is option d, that represents the pair of angles that has congruent values for the sin x and the cos yº.
To know more about congruent :
https://brainly.com/question/30596171
#SPJ11
To find the pair of angles that have congruent values for the sin x and the cos yº, we use the identity [tex]sin^2 \theta+cos^2 \theta=1[/tex]. Since sin and cos are squared, their values must be equal and both must be positive.
Thus, the only pair of angles that satisfies the requirement is d. 70;70.
An explanation for each option provided:
Option A: The sine of 70º and the cosine of 120º are not equal. Hence, this is not the correct answer.
Option B: The sine of 70º and the cosine of 20º are not equal. Therefore, this is not the correct answer.
Option C: The sine of 70º and the cosine of 160º are not equal. Thus, this is not the correct answer.
Option D: The sine of 70º is equal to the cosine of 20º, which is also equal to the cosine of 70º. Therefore, this is the correct answer.
To know more about congruent values visit
https://brainly.com/question/22999023
#SPJ11
Define the following matrix norm for an n x n real matrix B: || B|| M = sup {||Bx|| :X ER", ||||0 = 1}. Show that || B|| M = max 1
The matrix norm ||B||_M is equal to the maximum value of ||Bx||_M over all vectors x with a Euclidean norm of 1, i.e., ||B||M = max{||x||₂ = 1} ||Bx||_M.
To show that the matrix norm ||B||M = max{||x||₂ = 1} ||Bx||₂, we need to demonstrate two properties
the upper bound property and the achievability property.
Upper bound property:
We want to show that ||B||M ≤ max{||x||₂ = 1} ||Bx||₂.
Let's consider an arbitrary vector x with ||x||₂ = 1. Since ||Bx||₂ represents the Euclidean norm of the vector Bx, it follows that ||Bx||₂ ≤ ||Bx||_M for any x. Therefore, taking the supremum over all such x, we have:
sup{||Bx||₂ : ||x||₂ = 1} ≤ sup{||Bx||_M : ||x||₂ = 1}.
This implies that
||B||M ≤ max{||x||₂ = 1} ||Bx||_M.
Achievability property:
We want to show that there exists a vector x such that ||x||₂ = 1 and
||Bx||M = max{||x||₂ = 1} ||Bx||_M.
Consider the vector x' that achieves the maximum value in the expression max_{||x||₂ = 1} ||Bx||_M. Since the maximum value is attained, ||Bx'||M = max{||x||₂ = 1} ||Bx||_M.
Since ||x'||_2 = 1, we have ||Bx'||₂ ≤ ||Bx'||_M. Therefore,
||Bx'||₂ ≤ ||B'||M = max{||x||₂ = 1} ||Bx||_M.
Combining both properties, we conclude that
||B||M = max{||x||₂ = 1} ||Bx||_M.
In summary, we have shown that the matrix norm ||B||_M is equal to the maximum value of ||Bx||_M over all vectors x with a Euclidean norm of 1, i.e., ||B||M = max{||x||₂ = 1} ||Bx||_M.
To know more about Euclidean norm click here :
https://brainly.com/question/15018847
#SPJ4
The number of reducible monic polynomials of degree 2 over Z3 is: 8 2 4 F
The answer to the question "The number of reducible monic polynomials of degree 2 over Z3 is" is 4.
A polynomial is known as reducible if it can be expressed as the product of two non-constant polynomials. In this question, we are to determine the number of reducible monic polynomials of degree 2 over Z3.As a monic polynomial of degree 2 is given by $$f(x)=x^2+bx+c$$where b and c are elements of Z3, and it is required that f(x) be reducible.We will use the fact that a polynomial is reducible if and only if it has a root over the field K. Thus, we need to find the number of distinct roots of the polynomial f(x) in Z3.
To do this, we set f(x) = 0, and solve for x. This gives us$$x^2 + bx + c = 0$$
Now, using the quadratic formula, we obtain $$x = \frac{ - b\pm \sqrt {b^2-4c}}{2}$$
Thus, we need to count the number of values of b and c such that the expression under the square root sign is a square in Z3, for both plus and minus signs. This will give us the number of roots, and hence the number of reducible polynomials over Z3.Using brute force, we can check that there are$$3^2 = 9$$possible choices of (b, c) in Z3.
For each of these choices, we can evaluate the discriminant $b^2 - 4c$, and determine if it is a square in Z3.Using a table or brute force again, we can count the number of possible values of $b^2 - 4c$ that are squares in Z3. This gives us the number of distinct roots of f(x), and hence the number of reducible polynomials over Z3.Using this method, we obtain the answer as 4, i.e., there are 4 reducible monic polynomials of degree 2 over Z3.
Therefore, the answer to the question "The number of reducible monic polynomials of degree 2 over Z3 is" is 4.
Learn more about reducible monic polynomials at https://brainly.com/question/31059079
#SPJ11
(a) Shade the region in the complex plane is defined by :
{x€C :|z+2+2i|≤2}
(b) Shade the region in the complex plane is defined by :
{z€C : |z+2+2i/z-2-4i|≤1}
|z+2+2i|≤2}, the region inside the circle
|z+2+2i/z-2-4i|≤1 implies that the distance between z+2+2i and z-2-4i is less than or equal to 1. The locus of all such points is the region enclosed by the two circles.
The following are the steps to be followed to shade the regions in the complex plane that are defined by the equations shown:
Given, Shade the region in the complex plane that is defined by:
{x€C :|z+2+2i|≤2}
Step 1: Plot the point (2,-2) on the complex plane. This point represents -2 - 2i.
Step 2: Draw a circle of radius 2 units around this point. This circle represents the set of points in the complex plane that are 2 units away from -2 - 2i.
Step 3: Shade the region inside the circle.
Given, Shade the region in the complex plane
{z€C : |z+2+2i/z-2-4i|≤1}
Step 1: Plot the point (-2,-2) and (2,4) on the complex plane.
Step 2: Draw a circle of radius 1 unit centered at (-2,-2) and another circle of radius 1 unit centered at (2,4).
Step 3: Shade the region inside both the circles.
This is because |z+2+2i/z-2-4i|≤1 implies that the distance between z+2+2i and z-2-4i is less than or equal to 1.
Therefore the locus of all such points is the region enclosed by the two circles.
learn more about complex plane here:
https://brainly.com/question/24296629
#SPJ11
Explain why substitution cannot be used to find the limit and find the limit algebraically if it exists.
lim x^2+ 10x +21/x^2-9
x→ -3
The limit of the function f(x) = (x^2 + 10x + 21)/(x^2 - 9) as x approaches -3 is -2/3.
To find the limit of the function f(x) = (x^2 + 10x + 21)/(x^2 - 9) as x approaches -3, we cannot directly substitute -3 into the function because it results in an undefined expression. When substituting -3 into the function, we get:
f(-3) = (-3^2 + 10(-3) + 21)/(-3^2 - 9)
= (9 - 30 + 21)/(9 - 9)
= 0/0
The expression evaluates to 0/0, which is an indeterminate form. This means that we cannot determine the limit simply by substituting -3 into the function.
To find the limit algebraically, we can simplify the function and apply algebraic techniques:
f(x) = (x^2 + 10x + 21)/(x^2 - 9)
First, we can factorize the numerator and denominator:
f(x) = [(x + 7)(x + 3)]/[(x - 3)(x + 3)]
We notice that (x + 3) appears in both the numerator and denominator. We can cancel out this common factor:
f(x) = (x + 7)/(x - 3)
Now, we can evaluate the limit as x approaches -3 by direct substitution:
lim (x→-3) f(x) = lim (x→-3) [(x + 7)/(x - 3)]
= (-3 + 7)/(-3 - 3)
= 4/(-6)
= -2/3
Learn more about function here:
https://brainly.com/question/31062578
#SPJ11
Use synthetic division to find the function values. Then check your work using a graphing calculator. f(x)=x3-16x2 + 83x-140; find f(4), f(-5), and f(7). 1(4)=□ (Simplify your answer.) (7)= (Simplify your answer.) f(-5):□ (Simplify your answer.)
The values of f(4), f(-5) and f(4).f(7) are -16, -1355 and 0 respectively for the function f(x) = x³ - 16x² + 83x - 140.
To find the value of f(4), we substitute x = 4 into the given function f(x) = x³ - 16x² + 83x - 140 and evaluate it.
Substituting x = 4,
f(4) = (4)³ - 16(4)² + 83(4) - 140
f(4) = 64 - 16(16) + 332 - 140
f(4) = 64 - 256 + 332 - 140
f(4) = -192 + 192
f(4) = -16
Therefore, f(4) = -16.
To find the value of f(-5), we substitute x = -5 into the given function f(x) = x³ - 16x² + 83x - 140 and evaluate it.
Substituting x = -5,
f(-5) = (-5)³ - 16(-5)² + 83(-5) - 140
f(-5) = -125 - 16(25) - 415 - 140
f(-5) = -125 - 400 - 415 - 140
f(-5) = -525 - 415 - 140
f(-5) = -940 - 415
f(-5) = -1355
Therefore, f(-5) = -1355.
To find the value of f(7), we substitute x = 7 into the given function f(x) = x³ - 16x² + 83x - 140 and evaluate it. Substituting x = 7,
f(7) = (7)³ - 16(7)² + 83(7) - 140
f(7) = 343 - 16(49) + 581 - 140
f(7) = 343 - 784 + 581 - 140
f(7) = -441 + 441
f(7) = 0
Therefore, f(7) = 0. Regarding f(4), we have already calculated it earlier as f(4) = -16. So, f(4).f(7) is 0.
To know more about substitution in function, visit,
https://brainly.in/question/9164121
#SPJ4
Complete question - f(x)=x³-16x² + 83x-140; find f(4), f(-5), and f(7). f(4) = ? (Simplify your answer).
For a random variable X with all moments finite, determine the value of t that minimizes the expected square difference function m(t) = E[(X – t)?]. = Fully justify your work and interpret the value of t. Interpret m(t) for the value of t determined
The correct value of t that minimizes the expected square difference function m(t) is t = E[X], which is the expected value of the random variable X.
To determine the value of t that minimizes the expected square difference function m(t) = [tex]E[(X - t)^2],[/tex] we can differentiate m(t) with respect to t and set the derivative equal to zero. This will give us the critical point where the function is minimized.
Let's start by differentiating m(t) with respect to t:
[tex]m'(t) = d/dt [E[(X - t)^2]][/tex]
Using the chain rule, we have:
[tex]m'(t) = E[2(X - t) * (-1)][/tex]
m'(t) = -2E[X - t]
Since E[X - t] is the expected value of the difference between X and t, we can rewrite it as:
m'(t) = -2(E[X] - t)
To find the critical point, we set m'(t) equal to zero:
-2(E[X] - t) = 0
E[X] - t = 0
t = E[X]
Therefore, the value of t that minimizes the expected square difference function m(t) is t = E[X], which is the expected value of the random variable X.
Interpretation:
The value of t = E[X] represents the best estimate or prediction for the random variable X. By setting t equal to the expected value of X, we minimize the expected square difference between X and t, which means we are minimizing the average squared deviation between X and its expected value.
In other words, choosing t = E[X] as the optimal value minimizes the overall "error" or discrepancy between the random variable X and its expected value. It represents the most likely or average value for X based on the available data and the underlying distribution.
Read more about probability here:
brainly.com/question/251701
#SPJ11
what influences does public health have on the U.S. health care system? what is a positive example and a negative example?
Public health has a crucial influence on the U.S. healthcare system by promoting disease prevention, health promotion, policy development, emergency preparedness, and more. Positive examples demonstrate how public health efforts improve health outcomes, reduce costs, and enhance population well-being. Negative examples highlight instances where shortcomings in public health can lead to health risks, increased healthcare burden, and adverse consequences for the population.
Public health plays a significant role in shaping the U.S. healthcare system. It encompasses a range of efforts and policies aimed at promoting and protecting the health of the population. Here are some influences of public health on the U.S. healthcare system:
Disease prevention and control: Public health initiatives focus on preventing the spread of infectious diseases, such as vaccination programs, disease surveillance, and outbreak investigations. These efforts help reduce the burden on the healthcare system by preventing illnesses and reducing healthcare costs.
Positive example: Successful vaccination campaigns have led to the eradication or significant reduction of diseases like polio and smallpox, protecting public health and reducing the need for costly treatments.
Negative example: Failure to adequately control and contain infectious diseases can lead to outbreaks and public health emergencies, straining healthcare resources and posing a risk to the population's health.
Health promotion and education: Public health agencies work to educate the public about healthy behaviors, lifestyle choices, and disease prevention strategies. They promote initiatives like smoking cessation programs, healthy eating campaigns, and physical activity promotion.
Positive example: Public health campaigns promoting smoking cessation have contributed to a decrease in smoking rates, resulting in improved public health outcomes and reduced healthcare costs associated with smoking-related diseases.
Negative example: Insufficient public health education and awareness campaigns on the dangers of substance abuse may contribute to increased addiction rates, leading to increased healthcare utilization and negative health outcomes.
Health policy and regulation: Public health agencies play a role in shaping health policies and regulations that govern the healthcare system. They develop and implement guidelines, standards, and regulations to ensure quality care, patient safety, and access to essential health services.
Positive example: Implementation of regulations mandating health insurance coverage for preventive services has increased access to preventive care, enabling early detection and treatment of diseases, and reducing healthcare costs in the long run.
Negative example: Inadequate regulation or enforcement of healthcare safety standards can lead to medical errors, hospital-acquired infections, and compromised patient safety.
Emergency preparedness and response: Public health agencies are responsible for preparing for and responding to public health emergencies, such as natural disasters, disease outbreaks, and bioterrorism events. They coordinate emergency response efforts, develop emergency plans, and ensure the availability of essential resources and healthcare infrastructure.
Positive example: Effective public health emergency preparedness and response during the H1N1 influenza pandemic in 2009 helped mitigate the impact of the virus, protecting public health and minimizing strain on the healthcare system.
Negative example: Inadequate preparedness or response to a public health emergency can lead to delayed or insufficient healthcare services, resulting in higher morbidity and mortality rates.
Learn more about public health have here, https://brainly.com/question/2051613
#SPJ11
Let Q be a relation on the set of integers, a,b € Z, aQb: 3/(a + 2b) Determine if the relation is each of these and explain why or why not. (a) Reflexive YES NO (b) Symmetric YES NO (c) Transitive YES NO (d) Antisymmetric YES NO (e) Irreflexive YES NO (1) Asymmetric YES NO
(a) Reflexive: No
(b) Symmetric: Yes
(c) Transitive: Yes
(d) Antisymmetric: No
(e) Irreflexive: No
(f) Asymmetric: No
Q is a relation on the set of integers, a,b € Z, and aQb: 3/(a + 2b). We need to determine if the relation is each of these and explain why or why not.
(a) Reflexive:
If the relation is reflexive then aQa should be true for every 'a' in the set of integers Z.
The relation aQa = 3/(a+2a) = 3/(3a) = 1/a which is not true for every a since there exists some values of a for which it is not defined. Hence the given relation is not reflexive.
(b) Symmetric:
If the relation is symmetric then whenever a is related to b then b must be related to a as well. Let's check whether the given relation satisfies the symmetric property or not.aQb: 3/(a + 2b), substituting a = b in the above relation we get aQb: 3/(b + 2b) => 3/(3b) = 1/bbQa: 3/(b + 2a)
Thus the relation is symmetric.
(c) Transitive:
If the relation is transitive then whenever a is related to b and b is related to c, then a must be related to c.
Let's check whether the given relation satisfies the transitive property or not. Let a, b, and c be integers such that aQb and bQc, then we get aQb: 3/(a + 2b) => 3 = a + 2b or b = (3 - a)/2 and bQc: 3/(b + 2c) => 3 = b + 2c or b = (3 - 2c)/2
Substituting the value of b from the first equation into the second equation we get, 3 = ((3 - a)/2) + 2c => c = (9 - 2a)/12
Now, substituting this value of 'c' into the equation 3 = b + 2c, we get b = (3 + a)/2 and substituting the values of 'a' and 'b' into the equation for aQb, we get aQc: 3/(a + 2c) => 3/(a + 2(9-2a)/12) = 3/1 = 3. Hence the relation is transitive.
(d) Antisymmetric:
If the relation is antisymmetric then whenever a is related to b and b is related to a, then a must be equal to b. Since the relation is not reflexive the condition for antisymmetric cannot hold and hence it is not antisymmetric.
(e) Irreflexive:
If the relation is irreflexive then aQa must always be false for every 'a' in the set of integers Z.
The relation aQa = 3/(a+2a) = 3/(3a) = 1/a which is not false for every a. Hence the given relation is not irreflexive.
(f) Asymmetric:
A relation is asymmetric if it is both antisymmetric and irreflexive. Since the relation is not antisymmetric, the condition for asymmetric cannot hold and hence it is not asymmetric.
To learn more about relation: https://brainly.com/question/15828363
#SPJ11
(x1x2x3') + (x1x2'x3) + (x1x2'x3') + (x1'x2x3') +
(x1'x2'x3')
Use the properties of Boolean algebra to reduce the
sum-of-products expression
The simplified form of the given sum-of-products expression using Boolean algebra properties is x1x2x3' + x1'x2x3' + x1'x2'x3.
Starting with the given expression, we can simplify it step by step using the properties of Boolean algebra:
1. Distributive property:
(x1x2x3') + (x1x2'x3) + (x1x2'x3') + (x1'x2x3') + (x1'x2'x3')
= x1x2x3' + x1x2'x3 + x1x2'x3' + x1'x2x3' + x1'x2'x3
2. Identity property:
Notice that x1x2'x3 + x1x2'x3' can be simplified as x1x2' (x3 + x3'), where x3 + x3' = 1 (complement property).
= x1x2x3' + x1'x2x3' + x1'x2'x3 + x1x2' (1)
3. Absorption property:
Since x1x2' (1) is multiplied by 1, it can be absorbed:
= x1x2x3' + x1'x2x3' + x1'x2'x3
Therefore, the simplified form of the given sum-of-products expression using Boolean algebra properties is x1x2x3' + x1'x2x3' + x1'x2'x3.
Learn more about Boolean algebra here:
https://brainly.com/question/31647098?
#SPJ11
ecommerce, a large internet retailer, is studying the lead time (elapsed time between when an order is placed and when it is filled) for a sample of recent orders. the lead times are reported in days. what are the coordinates of the first class for a frequency polygon?
To determine the coordinates of the first class for a frequency polygon, we need to consider the range of lead times observed in the sample and how we want to group the data.
The first class for a frequency polygon represents the lowest range of lead times. To determine this range, we can look at the minimum and maximum lead times in the sample and decide on an appropriate interval size.
For example, if the minimum lead time observed is 1 day and the maximum lead time observed is 10 days, and we choose an interval size of 2 days, the first class would start at 1 day and end at 3 days.
The coordinates of the first class for the frequency polygon would be represented as (1, 3), where the first number represents the lower limit of the first class (1 day) and the second number represents the upper limit of the first class (3 days).
It's important to note that the specific choice of interval size and starting point for the first class can vary depending on the data and the analysis goals. Therefore, the coordinates of the first class may differ based on the specific context of the study.
Know more about Interval here:
https://brainly.com/question/11051767
#SPJ11
(GEOMETRY only answer if u know) Is rectangle EFGH the result of a dilation of rectangle ABCD with a center of dilation at the origin? Why or why not?
a.Yes, because corresponding sides are parallel and have lengths in the ratio 1/4
b.Yes, because both figures are rectangles and all rectangles are similar.
c.No, because the center of dilation is not at (0, 0).
d.No, because corresponding sides have different slopes
The answer to the question is option d: No, because corresponding sides have different slopes.
Explanation: Two figures are said to be similar if they have the same shape but are of different sizes. The ratio of their corresponding sides is the same as their scale factor. To get one figure from another, a dilation occurs, which multiplies all of its dimensions by a fixed factor.In rectangle ABCD and rectangle EFGH, the corresponding sides are parallel but are not of equal length. Because of the dilation of the ABCD rectangle, the corresponding sides of the two rectangles have different slopes.The answer to the question is option d. No, because corresponding sides have different slopes.
To know more about slopes visit:
https://brainly.com/question/16949303
#SPJ11
The answer to the given question is "No, because the center of dilation is not at (0, 0)."Why?A dilation is a transformation that changes the size of a geometric figure by a scale factor without changing its shape. Therefore, option c is the correct answer.
When one shape is scaled by a given scale factor from another shape, the shapes are called similar figures. Similar figures have corresponding angles that are congruent and corresponding sides that are in proportion with the same ratio.Rectangles ABCD and EFGH can be similar but they are not the result of a dilation of one from the other. Because ABCD is a rectangle with opposite sides parallel and congruent, and EFGH is a rectangle with opposite sides parallel and congruent as well. This similarity doesn't confirm that they are obtained from dilation of one from the other. Moreover, we can't say the same because we can't have the center of dilation at (0,0) as the lengths of corresponding sides of rectangle EFGH and rectangle ABCD are not in proportion 1/4.
To know more about geometric, visit:
https://brainly.com/question/29170212
#SPJ11
2. Mr. Sy asserts that fewer than 5% of the bulbs that he sells are defective. Suppose 300 bulbs are randomly selected, each are tested and 10 defective bulbs are found. Does this provide sufficient evidence for Mr. Sy to conclude that the fraction of defective bulbs is less than 0.05? Use α = 0.01.
A. We rejected the null hypothesis since the computed probability value is lesser than - 1.28.
B. Accept alternative hypothesis since the computed probability value is greater than 0.05.
C. We reject the null hypothesis since there is no sufficient evidence to reject Mr. Sy's statement.
D. We cannot reject the null hypothesis since there is no sufficient evidence to reject Mr. Sy's statement.
The correct answer is option D: We cannot reject the null hypothesis since there is no sufficient evidence to reject Mr. Sy's statement.
The null hypothesis for the given question is: $H_{0}: p = 0.05$And the alternative hypothesis is: $H_{1}: p < 0.05$We need to test whether the given data is sufficient evidence for Mr. Sy to conclude that the fraction of defective bulbs is less than 0.05.
To perform the test, we use the following formula:\[z = \frac{p - P}{\sqrt{P(1-P)/n}}\]
Here, p is the sample proportion, P is the population proportion, and n is the sample size. Substituting the given values, we get:\[z = \frac{0.0333 - 0.05}{\sqrt{(0.05)(0.95)/300}} = -2.14\]
where 0.0333 is the sample proportion of defective bulbs. The critical value of z for a one-tailed test with α = 0.01 is -2.33. Since -2.14 > -2.33, we cannot reject the null hypothesis. Therefore, the correct answer is option D: We cannot reject the null hypothesis since there is no sufficient evidence to reject Mr. Sy's statement.
To know more about fraction visit:
https://brainly.com/question/78672
#SPJ11
The proportion of defective bulbs is less than 0.05. Therefore, option D is incorrect. Options A and B are incorrect as well. The correct option is C: We reject the null hypothesis since there is sufficient evidence to reject Mr. Sy's statement.
To determine whether the sample data provides sufficient evidence for Mr. Sy to conclude that the fraction of defective bulbs is less than 0.05, let's consider the hypothesis testing. We have a null hypothesis (H0) and an alternative hypothesis (Ha).H0: p ≥ 0.05 (the proportion of defective bulbs is greater than or equal to 5%)Ha: p < 0.05 (the proportion of defective bulbs is less than 5%)where p is the population proportion of defective bulbs.The level of significance is α = 0.01.The test statistics can be calculated as follows:Since the sample size n = 300 is large and the population standard deviation σ is unknown, we can use the z-test statistic instead of the t-test statistic.Now, we need to determine the rejection region. Since this is a left-tailed test, the rejection region is given by z < -2.33. The test statistics z = -3.10 is less than -2.33, which lies in the rejection region.Therefore, we can reject the null hypothesis H0 and accept the alternative hypothesis Ha.
To know more about proportion, visit:
https://brainly.com/question/31548894
#SPJ11
Kieran is the owner of a bookstore in Brisbane. He is looking to add more books of the fantasy genre to his store but he is not sure if that is a profitable decision. He asked 60 of his store customers whether they liked reading books that fit in that genre and 28 customers told him they did. He wants his estimate to be within 0.06, either side of the true proportion with 82% confidence. How large of a sample is required? Note: Use an appropriate value from the Z-table and that hand calculation to find the answer (i.e. do not use Kaddstat)
With a margin of error of 0.06 on each side, a sample size of at least 221 consumers is needed to estimate consumer percentage who enjoy reading fantasy-themed novels.
Total customers asked = 60
People who like reading = 28
Estimated needed = 0.06
True proportion = 82%
The formula for sample size calculation for proportions is to be used to get the sample size necessary to estimate the proportion of consumers who enjoy reading fantasy novels with a specific margin of error and confidence level.
Calculating using margin of error -
[tex]n = (Z^2 * p * (1 - p)) / E^2[/tex]
Substituting the values -
[tex]n = (1.28^2 * 0.4667 * (1 - 0.4667)) / 0.06^2[/tex]
= 220.4 or 221.
Read more about margin of error on:
https://brainly.com/question/29328438
#SPJ4
Note: Separate questions
Use inverse matrix to solve the following systems of equations: ?', 2X, - 4X2 = -3 3X1 + 5X2 = 1 .) 3X1 - 2X2-4 = 0 -4X1 + 3X2 + 5 = 0
Using an inverse matrix the solution to the given system of equations is X₁ = -16/15 and X₂ = -12/5.
To solve the system of equations using the inverse matrix, we represent the equations in matrix form as AX = B, where A is the coefficient matrix, X is the variable matrix, and B is the constant matrix.
The given system of equations can be written as:
Equation 1: -3X₁ + 2X₂ = 4
Equation 2: 3X₁ - 2X₂ = 4
Rewriting the equations in matrix form, we have:
[tex]\left[\begin{array}{ccc}-3 &2\\3&-2\end{array}\right] \left[\begin{array}{ccc}X1 \\X\\\end{array}\right] \left[\begin{array}{ccc}4 \\4\\\end{array}\right][/tex]
To find the solution, we need to calculate the inverse of the coefficient matrix A. Let's call it A⁻¹.
A⁻¹ = ⎡ -2/15 -2/15 ⎤
⎣ -3/10 -3/10 ⎦
[tex]A^{-1}= \left[\begin{array}{ccc}\frac{-2}{15}&\frac{-2}{15}\\\frac{-3}{10}&\frac{-3}{10}\\\end{array}\right][/tex]
Now, we can solve for X by multiplying A⁻¹ with B:
[tex]\left[\begin{array}{ccc}X1\\X2\\\end{array}\right]= \left[\begin{array}{ccc}\frac{-2}{15}&\frac{-2}{15}\\\frac{-3}{10}&\frac{-3}{10}\\\end{array}\right]\left[\begin{array}{ccc}4\\4\\\end{array}\right][/tex]
Performing the matrix multiplication, we get:
[tex]\left[\begin{array}{ccc}X1\\X2\\\end{array}\right]= \left[\begin{array}{ccc}\frac{-2}{15}*4+\frac{-2}{15}*4\\\frac{-3}{10}*4+\frac{-3}{10}*4\\\end{array}\right]=\left[\begin{array}{ccc}\frac{-16}{15}\\\frac{-24}{10}\\\end{array}\right][/tex]
Simplifying the results, we have:
X₁ = -16/15
X₂ = -12/5
Therefore, the solution to the system of equations is X₁ = -16/15 and X₂ = -12/5.
To know more about inverse matrix refer here:
https://brainly.com/question/28097317
#SPJ11
Which of the following sequences of functions f_k: R → R converge pointwise in R? Find all the intervals where the convergence is uniform. (a) kx /(kx² + 1 ) (b) kx/( k²x²+ 1) (c) k²x /(kx² + 1)
The sequence of functions that converges pointwise in R is [tex]f_k(x) = k^2x / (kx^2 + 1)[/tex]. The convergence is uniform on any compact interval [a, b] where a and b are real numbers and a < b.
To determine the pointwise convergence, we evaluate the limit [tex]f_k(x)[/tex] as k approaches infinity for each function. Taking the limit [tex]f_k(x) = k^2x / (kx^2 + 1)[/tex] as k approaches infinity, we obtain the limit function f(x) = 0 for all x in R.
Next, we analyze the uniform convergence. We need to find intervals where the difference between [tex]f_k(x)[/tex] and f(x) can be made arbitrarily small for any given ε > 0, uniformly for all x in the interval.
For (a) and (b), as k increases, the functions oscillate more rapidly near x = 0. Therefore, uniform convergence does not hold on any interval containing x = 0.
For (c), the sequence of functions converges uniformly on any compact interval [a, b] where a and b are real numbers and a < b. This is because as k increases, the numerator [tex]k^2x[/tex] grows faster than the denominator [tex]kx^2 + 1[/tex], resulting in the function becoming arbitrarily close to f(x) = 0 uniformly on the interval.
In summary, the sequence of functions [tex]f_k(x) = k^2x / (kx^2 + 1)[/tex] converges pointwise in R, and the convergence is uniform on any compact interval [a, b] where a and b are real numbers and a < b, except for the intervals containing x = 0 in cases (a) and (b).
To learn more about Convergence, visit:
https://brainly.com/question/31064957
#SPJ11
Find the radius of convergence, R, of the series. 00 x + 4 Σ ✓n n = 2 R = Find the interval, I, of convergence of the series.
The radius of convergence, R, is 0. The interval of convergence, I, is (-R, R), which in this case is (-0, 0), or simply the single point {0}.
What is the radius of convergence, interval, I, of convergence of the series?To find the radius of convergence, we can use the ratio test. Given the series:
00 x + 4 Σ ✓n n = 2
Let's calculate the ratio of consecutive terms:
lim(n→∞) |√(n+1) / √n|
Using the limit test, we simplify the expression:
lim(n→∞) √(n+1) / √n
To evaluate this limit, rationalize the denominator by multiplying the expression by its conjugate:
lim(n→∞) (√(n+1) / √n) × (√(n+1) / √(n+1))
This simplifies to:
lim(n→∞) √(n+1) × √(n+1) / √n × √(n+1)
Simplifying further:
lim(n→∞) √((n+1)² / n × (n+1))
lim(n→∞) (n+1) / √n × √(n+1)
Disregard the constant term (n+1) since the focus is the behavior as n approaches infinity:
lim(n→∞) √(n+1) / √n
As n approaches infinity, the ratio simplifies to:
lim(n→∞) √(1 + 1/n)
Since the limit of this expression is 1, we have:
lim(n→∞) √(1 + 1/n) = 1
According to the ratio test, if the limit of the ratio is less than 1, the series converges absolutely. If the limit is greater than 1 or it diverges, the series diverges. If the limit is exactly 1, the ratio test is inconclusive.
In this case, the limit is 1, which means the ratio test is inconclusive. To determine the radius of convergence, consider the behavior at the endpoints of the interval.
At x = 0, the series becomes:
00 x + 4 Σ ✓n n = 2 = 0
So the series converges at x = 0.
Now let's consider the behavior as x approaches infinity:
lim(x→∞) 00 x + 4 Σ ✓n n = 2
Since the terms in the series involve √n, which increases without bound as n approaches infinity, the series diverges as x approaches infinity.
Therefore, the radius of convergence, R, is 0. The interval of convergence, I, is (-R, R), which in this case is (-0, 0), or simply the single point {0}.
learn more about radius of convergence: https://brainly.com/question/17019250
#SPJ4
approximately how long must a 3.4 cfs pump be run to raise the water level 11 inches in a 5 acre reservoir?
To calculate the time required to raise the water level in a reservoir, we need additional information. Specifically, we need to know the area of the reservoir (in square feet) and the conversion factor between cubic feet per second (cfs) and the unit of volume used for the reservoir's area.
Assuming the reservoir's area is given in square feet and the conversion factor is 1 acre = 43,560 square feet, we can proceed with the calculation.
Given:
Flow rate (Q) = 3.4 cfs
Water level increase (h) = 11 inches
Reservoir area (A) = 5 acres = 5 * 43,560 square feet
First, we convert the water level increase from inches to feet:
h = 11 inches * (1 foot / 12 inches) = 11/12 feet
Next, we calculate the volume of water needed to raise the water level in the reservoir:
Volume (V) = A * h
Finally, we calculate the time required to pump the necessary volume of water:
Time (T) = V / Q
Substituting the values, we have:
Volume (V) = 5 * 43,560 square feet * 11/12 feet
Time (T) = (5 * 43,560 * 11/12) / 3.4 seconds
To get the time in a more convenient unit, you can convert seconds to minutes or hours as desired.
Learn more about area of the reservoir from
https://brainly.com/question/28812138
#SPJ11
A carnival roulette wheel contains 32 slots numbered 00, 0, 1, 2, 3, ..., 30. 15 of the slots numbered 1 through 30 are colored red, and 15 are colored black. The 00 and 0 slots are uncolored. The wheel is spun, and a ball is rolled around the rim until it falls into a slot. What is the probability that the ball falls into a black slot? The probability that the ball falls into a black slot is (Simplify your answer. Type an integer or a fraction)
The probability that the ball falls into a black slot is 15/32.To determine the probability that the ball falls into a black slot, we need to calculate the ratio of the number of black slots to the total number of slots on the carnival roulette wheel.
The number of black slots is given as 15, and the total number of slots is 32. We exclude the 00 and 0 slots from the count of black slots since they are uncolored.
Thus, the probability of the ball falling into a black slot is given by:
Probability of black slot = Number of black slots / Total number of slots
Probability of black slot = 15 / 32
Therefore, the probability that the ball falls into a black slot is 15/32.
Learn more about Probability:
https://brainly.com/question/30390037
#SPJ4
Chocolate chip cookies have a distribution that is approximately normal with a mean of 24.5 chocolate chips per cookie and a standard deviation of 2.2 chocolate chips per cookie.
Find P10:________
P90: ____________
How might those values be helpful to the producer of the chocolate chip cookies?
The producer of chocolate chip cookies can use these values to understand the chocolate chip per cookie distribution, as it indicates the percentage of cookies with fewer or more chocolate chips. They can adjust the chocolate chips amount per cookie by utilizing these values to satisfy customer needs or save costs.
Given, the mean of chocolate chips per cookie, µ = 24.5, standard deviation, σ = 2.2 Chocolate chip cookies are approximately normally distributed. Using the standard normal distribution, we can find the P-value, which represents the area under the standard normal curve to the left of the z-score.
To find the P10; Let z be the corresponding z-score such that P(Z < z) = 0.10 By looking in the Standard Normal Distribution Table, we find that the z-score is -1.28.Z = (X - µ) / σ = -1.28So, X = µ + z σ = 24.5 + (-1.28) × 2.2 = 21.964 Nearly 10% of the cookies have fewer than 21.964 chocolate chips in each cookie. To find the P90; Let z be the corresponding z-score such that P(Z < z) = 0.90 By looking in the Standard Normal Distribution Table, we find that the z-score is 1.28.Z = (X - µ) / σ = 1.28So, X = µ + z σ = 24.5 + (1.28) × 2.2 = 27.036
Nearly 90% of the cookies have fewer than 27.036 chocolate chips in each cookie.
To Know more about z-score visit:
https://brainly.com/question/31871890
#SPJ11
Given that chocolate chip cookies have a distribution that is approximately normal with a mean of 24.5 chocolate chips per cookie and a standard deviation of 2.2 chocolate chips per cookie. P10 = 21.4 (approx.), P90 = 27.6 (approx.). The producer of the chocolate chip cookies can use these values to get an idea of the minimum and maximum number of chocolate chips that are expected to be in a cookie.
Explanation: Given that μ = 24.5 and σ = 2.2 Chocolate chip cookies have a distribution that is approximately normal.
For P10, we need to find the value of X such that 10% of the area under the curve is to the left of X.
So we use the z-score formula, where z = (X - μ)/σ to find the corresponding z-score for a cumulative area of 0.1 in the z-table.
z = -1.28
So we can write:
-1.28 = (X - 24.5) / 2.2
X = 21.4
For P90, we need to find the value of X such that 90% of the area under the curve is to the left of X.
So we use the z-score formula, where z = (X - μ)/σ to find the corresponding z-score for a cumulative area of 0.9 in the z-table.
z = 1.28
So we can write:
1.28 = (X - 24.5) / 2.2
X = 27.
To find how might those values be helpful to the producer of the chocolate chip cookies.
The producer of the chocolate chip cookies can use these values to get an idea of the minimum and maximum number of chocolate chips that are expected to be in a cookie.
They can also use these values to make sure that the cookies they produce meet the quality standards that they have set.
To know more about z-score, visit:
https://brainly.com/question/31871890
#SPJ11
8. Which of the following is a predictive model? A. clustering B. regression C. summarization D. association rules 9. Which of the following is a descriptive model? A. regression B. classification C.
8. The correct option for a predictive model is:
B. regression
9. The correct option for a descriptive model is:
B. classification
Predictive models are those that attempt to predict the value of a certain target variable, given the input variables. The input variables, often known as predictors, are used to determine the target variable, also known as the response variable. Predictive models are often referred to as regression models. Therefore, regression is a predictive model
Descriptive models are those that attempt to describe or summarize the data in some way. They don't make predictions or estimate values for specific variables. Rather, they're used to categorize, classify, or group data in a useful way. Classification, for example, is a descriptive modeling technique that groups data into discrete categories based on specific characteristics. As a result, classification is a descriptive model.
To know more about regression, visit the link :
#SPJ11
convert the point from cartesian to polar coordinates. write your answer in radians. round to the nearest hundredth.
The given point (-10, 1) in Cartesian-Coordinates can be represented as approximately (10.5, 3.0416) in polar coordinate.
In order to convert the point (-10, 1) from Cartesian-Coordinates to polar coordinates, we use the formulas : r = √(x² + y²), and θ = arctan(y/x),
We know that, the point is (-10, 1), so, we substitute the values into the formulas:
We get,
r = √((-10)² + 1²)
r = √(100 + 1)
r = √101 ≈ 10.05, and
The point lies in quadrant-2 , so, angle will be measured in counter-clockwise from the positive x-axis, which means it is between π/2 and π radians.
Therefore, The adjusted θ is : θ = π + arctan(1/-10) ≈ 3.0416 radians.
Learn more about Polar Coordinates here
brainly.com/question/105227
#SPJ4
The given question is incomplete, the complete question is
Convert the point from Cartesian to polar coordinates. Write your answer in radians. Round to the nearest hundredth.
(-10,1)
Which equation has a vertex at (3, –2) and directrix of y = 0?
y + 2 = StartFraction 1 Over 8 EndFraction (x minus 3) squared
y + 2 = 8 (x minus 3) squared
y + 2 = negative StartFraction 1 Over 8 EndFraction (x minus 3) squared
y + 2 = negative 8 (x minus 3) squared
The equation that has a vertex at (3, -2) and a directrix of y = 0 is:
y + 2 = -1/8(x - 3)^2
The vertex form of a quadratic equation is given by y = a(x - h)^2 + k, where (h, k) represents the vertex of the parabola.
In this case, the given vertex is (3, -2), so we have h = 3 and k = -2. Plugging these values into the vertex form, we get:
y = a(x - 3)^2 - 2
Since the directrix is y = 0, we know that the parabola opens downward. Therefore, the coefficient 'a' must be negative.
Hence, the equation that satisfies these conditions is:
y + 2 = -1/8(x - 3)^2
To learn more about squared
brainly.com/question/14198272
#SPJ11
solve the following system of equations using the substitution method. x = 2y 11 7x 2y = 13 question 13 options: a) (3,–6) b) (3,6) c) (–3,4) d) (3,–4)
The correct answer is the solution to the system of equations is (x, y) = (13/8, 13/16). None of the provided options match this solution, so none of the options (a), (b), (c), or (d) is correct.
To solve the given system of equations using the substitution method, we'll start by substituting the value of x from the first equation into the second equation:
x = 2y ...(1)
7x + 2y = 13 ...(2)
Substituting x = 2y into equation (2), we have:
7(2y) + 2y = 13
14y + 2y = 13
16y = 13
y = 13/16
Now that we have the value of y, we can substitute it back into equation (1) to find the corresponding value of x:
x = 2(13/16)
x = 26/16
x = 13/8
Therefore, the solution to the system of equations is (x, y) = (13/8, 13/16). None of the provided options match this solution, so none of the options (a), (b), (c), or (d) is correct.
know more about Substitution method
https://brainly.com/question/22340165
#SPJ11
circle m has a radius of 7.0 cm. the shortest distance between p and q on the circle is 7.3 cm. what is the approximate area of the shaded portion of circle m?
The approximate area of the shaded portion of circle M is approximately 38.48 square centimeters.
To determine the approximate area of the shaded portion of circle M, we need to find the area of the sector formed by points P, Q, and the center of the circle.
The shortest distance between points P and Q on the circle is the chord connecting them, which has a length of 7.3 cm. This chord is also the base of the sector.
The radius of circle M is 7.0 cm, which is also the height of the sector.
To calculate the area of the sector, we can use the formula:
Area = (θ/360) * π * r^2
where θ is the central angle of the sector in degrees, π is the mathematical constant pi, and r is the radius.
The central angle θ can be found by applying the cosine rule to the triangle formed by the radius (7.0 cm), the chord (7.3 cm), and the distance between the chord and the center of the circle (which is half the length of the chord).
Using the cosine rule, we have:
7.3^2 = 7.0^2 + (7.0^2 - 7.3/2)^2 - 2 * 7.0 * (7.0^2 - 7.3/2) * cos(θ)
Simplifying and solving for θ, we find:
θ ≈ 89.6 degrees
Now we can calculate the area of the sector:
Area = (89.6/360) * π * 7.0^2 ≈ 38.48 cm^2
Therefore, the approximate area of the shaded portion of circle M is approximately 38.48 square centimeters.
Learn more about pi:
https://brainly.com/question/457655
#SPJ11
The null hypothesis is that he can serve 70% of his first serves. Find the observed percentage and the standard error for percentage.
The given null hypothesis is that he can serve 70% of his first serves. We are to find the observed percentage and the standard error for percentage.
To find the observed percentage, we will need the data on the actual percentage of his first serves. However, to find the standard error, we will need to calculate it using the null hypothesis, which is given as 70%.The formula for standard error is:
Standard error = Square root of (pq/n)where p is the percentage of success, q is the percentage of failure, and n is the total number of trials.Let's assume that he played 100 games.
Then, the number of successful first serves = 70% of 100 = 70
and the number of unsuccessful first serves = 100 - 70 = 30.Hence, the observed percentage of successful first serves is 70%.Now, let's find the standard error:Standard error = sqrt(0.7 × 0.3 / 100)= sqrt(0.021)= 0.145= 14.5% (rounded to one decimal place)
Therefore, the observed percentage of successful first serves is 70%, and the standard error for the percentage is 14.5%.
To know more about null hypothesis, visit:
https://brainly.com/question/30821298
#SPJ11
The standard error for percentage is
[tex]SE = sqrt [ p(1 - p) / n ][/tex]
The observed percentage and the standard error for percentage can be found as follows:
The null hypothesis is that he can serve 70% of his first serves.
Let the sample percentage be p.
If the null hypothesis is true, then the distribution of the sample percentage can be approximated by a normal distribution with a mean of 70% and a standard deviation of:
Standard deviation = [tex]sqrt [ p(1 - p) / n ][/tex]
Where n is the sample size.
The standard error of percentage is given by the formula:
[tex]SE = sqrt [ p(1 - p) / n ][/tex]
Thus, the standard error for percentage is
[tex]SE = sqrt [ p(1 - p) / n ][/tex]
The observed percentage, p can be found by conducting a survey or experiment.
To know more about standard error, visit:
https://brainly.com/question/13179711
#SPJ11