the formulas of three important acids and three important bases and describe their uses.

Answer:

Explanation:

Potential energy builds as the coaster is going up the loop-the-loop and converts to kinetic energy on the way down and out of the loop-the-loop. The potential energy of the coaster is at its lowest and the kinetic energy is at its highest as the coaster moves in the lowest point of the loop-the- loop.

Answer:

1 MgF2 + 1 Li2CO3 --> 1 MgCO3 + 2 LiF

Explanation:

Answer:

Burning of the candle is both physical and chemical change. Burning of the candle melts the wax and hence physical state of wax has changed from solid to liquid.  

Again the wax combines with the atmospheric oxygen and changes to carbon dioxide, heat and light.  

Thus both the changes are accompanied by the burning of the candle.

Explanation:

hope this helps!

~mina

Mass is an intrinsic property of matter and is measured in kilograms. The mass of a bird is a constant. A 15-gram bird is 15 grams, whether measured on the Earth, the Moon, or Mars. Weight is a measure ofthe force of gravity on a physical object and is measured in newtons.

To answer the question, it is important to have an understanding of the order of orbital filling.

The order of orbital filling describes the order in which electrons occupy orbitals.

This order can be determined using the aufbau principle, which states that electrons will occupy the lowest-energy orbital available.

The order of orbital filling is as follows: 1s 2s 2p 3s 3p 4s 3d 4p 5s 4d 5p 6s 4f 5d 6p 7s 5f 6d 7p

Therefore, the complete form of the order of orbital filling, without blank spaces between orbitals, is:1s2s2p3s3p4s3d4p5s4d5p6s4f5d6p7s5f6d7p

#SPJ11 https://brainly.com/question/31701279

Answer:

Kim:

Wendell:

Gonzalo:

Explanation:

did it on Edge.

Answer:It is a plant

Explanation:

A new organism is discovered. It is multicellular, heterotrophic, and does move on its own. The organism belong to Kingdom Animalia.

A heterotroph is an organism that obtains energy and nutrients from other plants or animals. The term is derived from the Greek words hetero, which means "other," and trophe, which means "nourishment."

Fungi are multicellular, heterotrophic eukaryotes with chitinous cell walls. Kingdom Plantae contains autotrophic organisms with cellulosic cell walls, whereas Kingdom Animalia contains heterotrophic organisms without cell walls.

Animalia is a kingdom of multicellular, heterotrophic organisms. This kingdom includes humans and other primates, as well as insects, fish, reptiles, and a variety of other animals.

Thus, The organism belongs to Kingdom Animalia.

To learn more about the heterotrophs, follow the link;

https://brainly.com/question/25846728

#SPJ6

The conditions that apply to masses mA and mB for the acceleration to be in one direction (say, mA down the plane), or in the opposite direction are as follows:

1. mA > mB sine (mA down the plane)

2. mB9-mAg sine mBnA

The conditions that apply to masses mA and mB for the acceleration to be in one direction (say, mA down the plane), or in the opposite direction are as follows:

1. mA > mB sine (mA down the plane)

2. mB9-mA gsine mBnA

When the value of mass mA is greater than mB sine (mA down the plane), the acceleration is in one direction.

When mB9-mAgsine mBmA is greater, the acceleration is in the opposite direction.

Determine a formula for the acceleration of the system in terms of mA, mp.0, and 9.

Ignore the mass of the cord and pulley, Express your answer in terms of the variables mA, mp.0, and g.

The formula for acceleration of the system in terms of mA, mp, 0 and 9 is given below;

a = (mB-mAsinθ)/(mA + mB + m0) * g

Where,

θ = angle of inclination of the plane.

g = acceleration due to gravity.

mA = mass of object A.

mB = mass of object B.

m0 = mass of the pulley and cord.

To know more about plane visit:

https://brainly.com/question/2400767

#SPJ11

The statement that is not true for the dissolution of ZnCO₃ (s) in acid is option 3: "The dissolution of ZnCO₃ is facilitated by the evolution of a gas."

When ZnCO₃ dissolves in acid, such as hydrochloric acid (HCl), several reactions occur. The true statements are:

1. The dissolution of ZnCO₃ is facilitated by the formation of a weak acid: In the presence of an acid, the carbonate ion (CO₃²⁻) reacts with H⁺ ions from the acid to form carbonic acid (H₂CO₃), which is a weak acid.

2. The dissolution of ZnCO₃ is facilitated by the formation of a complex ion: The Zn²⁺ ion from ZnCO₃ can form a complex with H₂O molecules or other ligands present in the solution.

4. The dissolution of ZnCO₃ is facilitated by the decomposition of carbonic acid to CO₂ and H₂O: Carbonic acid (H₂CO₃) decomposes into carbon dioxide (CO₂) and water (H₂O), releasing CO₂ gas.

Therefore, option 3 is not true because the dissolution of ZnCO₃ is not directly facilitated by the evolution of a gas, but rather by the formation of a weak acid, complex ion formation, and decomposition of carbonic acid.

Learn more about acid here:

https://brainly.com/question/30086613

#SPJ4

e. Li⁺ > Na⁺ > K⁺ is in the correct order of decreasing radii.

The correct order of decreasing radii can be determined by considering the effective nuclear charge and shielding effect on the valence electrons. As we move from left to right across a period in the periodic table, the effective nuclear charge increases, resulting in a stronger attraction on the valence electrons and a decrease in atomic radius. Similarly, as we move down a group, the number of energy levels increases, leading to an increase in atomic radius.

In option e, Li⁺, Na⁺, and K⁺ belong to the alkali metal group in Periods 2 and 3. As we move from Li⁺ to Na⁺ to K⁺, we are moving down the group, which results in an increase in atomic radius. This is because each successive element has an additional energy level, leading to a larger atomic size. Therefore, the correct order of decreasing radii in option e is Li⁺ > Na⁺ > K⁺.

The other options do not follow the correct trend of decreasing radii based on the periodic trends discussed.

To learn more about radii, here

https://brainly.com/question/31610156

#SPJ4

Get ready, you should catch it.

Answer:

As an object falls, its gravitational potential energy decreases as its speed—and therefore its kinetic energy—increases.

Explanation:

Study Island

Answer:

The concentration of SO₂ will decreases

Explanation:

As you can see in the reaction

2 moles of gas ⇆ 3 moles of gas

Based on Le Châtelier's principle, a change doing in a system will produce that the system reacts in order to counteract the change made.

If the pressure is increased, the system will shift to the left in order to produce less moles of gas and decrease, thus, the pressure.

As the system shift to the left, the concentration of SO₂ will decreases

Answer:

maybe falling

Explanation:

Air is a force so its probably pushing down the object then making it fall

I think all objects? Not entirely sure.

At 25% and 50% neutralization, the pH remains the same, approximately 3.14. At 100% neutralization, the pH increases significantly to approximately 12.70 due to the hydrolysis of the resulting salt NaF.

To solve this problem, we'll consider the reaction between HF and NaOH. HF is a weak acid and NaOH is a strong base. The reaction can be written as follows:

HF + NaOH → NaF + H₂O

Given that the initial concentration of HF is 0.150 M and the concentration of NaOH is 0.250 M, we'll use the stoichiometry of the reaction to determine the concentrations of HF and NaOH at different stages of neutralization.

A. When neutralization is 25% complete:

25% of the HF will react with NaOH, which means 75% of the HF remains. Since the reaction between HF and NaOH is 1:1, the concentration of HF remaining will be 0.150 M * 0.75 = 0.1125 M. The concentration of NaOH consumed will be 0.250 M * 0.25 = 0.0625 M.

To calculate the pH at this stage, we need to consider the dissociation of HF. HF dissociates as follows:

HF ⇌ H⁺ + F⁻

The Ka of HF is given as 7.2 x 10⁻⁴. We'll assume that the concentration of F⁻ is negligible compared to the concentration of HF.

Using the Ka expression, we can calculate the concentration of H⁺:

Ka = [H⁺][F⁻] / [HF]

7.2 x 10⁻⁴ = [H⁺][0.1125 M] / [0.1125 M]

[H⁺] = 7.2 x 10⁻⁴ M

Therefore, the pH at 25% neutralization is approximately -log(7.2 x 10⁻⁴) = 3.14.

B. When neutralization is 50% complete:

50% of the HF will react with NaOH, which means 50% of the HF remains.

The concentration of HF remaining will be 0.150 M (0.50) = 0.075 M.

The concentration of NaOH consumed will be 0.250 M (0.50) = 0.125 M.

Using the same Ka expression as before, we can calculate the concentration of H⁺:

Ka = [H⁺][F⁻] / [HF]

7.2 x 10⁻⁴ = [H⁺][0.075 M] / [0.075 M]

[H⁺] = 7.2 x 10⁻⁴ M

Therefore, the pH at 50% neutralization is approximately -log(7.2 x 10⁻⁴) = 3.14.

C. When neutralization is 100% complete:

At this point, all of the HF has reacted with NaOH, resulting in the formation of NaF and water. The concentration of HF is zero, and the concentration of NaF is equal to the concentration of NaOH consumed, which is 0.250 M (0.2000 L) = 0.050 M.

Since NaF is a salt of a strong base and a weak acid, it will hydrolyze to produce F⁻ ions and a small number of OH⁻ ions. The concentration of F⁻ will be 0.050 M, and the concentration of OH⁻ will be negligible compared to F⁻.

The solution will be basic due to the presence of F⁻ ions. The pH can be calculated from the pOH:

pOH = -log[OH⁻]

pOH = -log(0.050) ≈ 1.30

pH = 14 - pOH = 14 - 1.30 ≈ 12.70

Therefore, when neutralization is 100% complete, the pH is approximately 12.70.

At 25% and 50% neutralization, the pH remains the same, approximately 3.14. This indicates that the solution is buffered due to the presence of the weak acid HF and its conjugate base F⁻. However, at 100% neutralization, the pH increases significantly to approximately 12.70 due to the hydrolysis of the resulting salt NaF. The solution becomes basic at this point.

Learn more about pH here:

https://brainly.com/question/28609181

#SPJ4

The statement that is true concerning ideal gases is:

"A gas exerts pressure as a result of the collisions of the gas molecules with the wall of the container."

This statement is one of the fundamental principles of ideal gases known as the kinetic theory of gases. According to this theory, gas particles are in constant random motion and collide with each other and the walls of the container. These collisions result in the exertion of pressure by the gas.

The other statements are not true for ideal gases:

The gas particles in a sample do not exert attraction for one another. Ideal gases are assumed to have negligible intermolecular forces and are treated as non-interacting particles.

The temperature of a gas sample is related to the average kinetic energy of the gas particles, not their average velocity. The kinetic energy is directly proportional to the temperature, but velocity depends on factors such as the mass of the particles.

The statement about the comparison of 10 L of Ar to 1.0 L of Ne is not accurate. The number of atoms in a gas sample is determined by Avogadro's law, which states that equal volumes of gases at the same temperature and pressure contain the same number of particles (atoms or molecules), regardless of their molar masses.

Learn more about Ideal gases from the link given below.

https://brainly.com/question/15962335

#SPJ4

Answer:

strong acid and weak base

Explanation:

#carryonlearning

In the given question dissociated solution describes the property of the strong base.

Bases are substances which gives hydroxide ion into the solution.

Dissociation reaction of caustic soda will be represented as:

KOH → K⁺ + OH⁻

From the above dissociation we conclude that potassium hydroxide is fully dissociates into their ions means it is a strong base and will make the solution caustic.

Hence potassium hydroxide is a strong base.

To know more about strong bases, visit the below link:

https://brainly.com/question/7245674

#SPJ2

Answer:

Explanation:

the first and last one

Answer: 1 and 4

A clean renewable source is sustainable

The empirical formula is C3H4.

The empirical formula of mesitylene can be found using the data provided in the problem statement.Let's write the balanced combustion reaction for mesitylene first:2 C9H12 + 25 O2 → 18 CO2 + 12 H2OThe molar mass of the compound (C9H12) can be calculated as follows:9 moles of carbon × 12 g/mol = 108 g/mol12 moles of hydrogen × 1 g/mol = 12 g/molMolar mass of the compound = 108 + 12 = 120 g/molThe amount of CO2 produced is 0.379 g and the amount of H2O produced is 0.1035 g.Moles of CO2 produced = 0.379 g / 44 g/mol = 0.0086 molesMoles of H2O produced = 0.1035 g / 18 g/mol = 0.00575 molesUsing the balanced chemical equation, we can calculate the moles of C9H12 required to produce these amounts of CO2 and H2O. Since we know that the ratio of carbon to water in the compound is 9:12, we can determine the number of moles of each element present in the compound.Moles of C9H12 required = (0.0086 mol CO2 × 2 mol C9H12) / 18 mol CO2 = 0.00096 mol C9H12Moles of carbon = 0.00096 mol C9H12 × 9 mol C / mol C9H12 = 0.00864 mol C9H12Moles of hydrogen = 0.00575 mol H2O × 2 mol H / mol H2O = 0.0115 mol HUsing the mole ratios, we can find the empirical formula:Moles of carbon = 0.00864 mol C9H12 × (1 mol / 0.00864 mol) = 1 mol C9H12Moles of hydrogen = 0.0115 mol H / 0.00864 mol = 1.33 mol H9 carbon atoms and 12 hydrogen atoms are present in one molecule of C9H12. To convert this to an empirical formula, we need to divide by the greatest common factor (GCF), which is 3. Therefore, the empirical formula is C3H4.

Learn more about empirical formula here:

https://brainly.com/question/32125056

#SPJ11

If some solution splashes on the lab bench when pouring the solution into the buchner funnel during vacuum filtration, the mass of precipitate data value will be less than the actual value

When solution splashes onto the lab bench, some of the precipitate may be lost, resulting in a lower amount of collected precipitate in the Buchner funnel than expected.

This loss leads to a lower mass measurement when compared to the actual value if no solution had splashed. Therefore, the mass of precipitate data value will be less than the actual value.

Read more on precipitate data here https://brainly.com/question/29347607

#SPJ4

The equilibrium concentration of S2−, can be x,x[ S 2 − ]=[ Zn 2 + ]=0.20 MKsp=[Zn2+][S2−]=1.1×10−21=0.20x20x=sqrt(1.1×10−21/0.20)=5.5×10−20 M[Zn2+]=[S2−]=5.5×10−20 MTherefore, the precipitating concentration of ZnS is 5.5 × 10−20 M.

Zinc sulfide is a compound that is colorless, transparent, and refractive. The mineral wurtzite is its most common form, although sphalerite occurs as a red, yellow, greenish, or black color. It is a chemical compound made up of the elements zinc and sulfur, and its chemical formula is ZnS.What is Ksp?Ksp (solubility product constant) is the equilibrium constant for a solid substance dissolving in an aqueous solution. It reflects the degree of saturation of a solution with a solute. For a compound that is ionically dissociated, it is equivalent to the product of the concentrations of the ions, each raised to the power of their stoichiometric coefficient. Zn(NO3)2 is the chemical formula for zinc nitrate. Zinc nitrate is a salt with a colorless or white crystalline appearance that is easily soluble in water and ethanol.What is the formula for Zinc sulfide?ZnS is the chemical formula for zinc sulfide.What is the formula for sulfide?The sulfide ion is a negatively charged polyatomic ion with the chemical formula S2-. It can be made by reacting an acid with a sulfide salt or by reducing sulfur with an appropriate reducing agent.ZnS will precipitate when the ion product is greater than the solubility product constant, which is equal to 1.1 x 10-21. Therefore, let's compute the equilibrium constant for the reaction ZnS(s)⇌Zn2+(aq)+S2-(aq)The equilibrium expression for this reaction isKsp=[Zn2+][S2−]The equilibrium concentration of Zn2+ can be computed from the concentration of Zn(NO3)2:0.20 M Zn(NO3)2⇌0.20 M Zn2+The equilibrium concentration of S2−, can be x,x[ S 2 − ]=[ Zn 2 + ]=0.20 MKsp=[Zn2+][S2−]=1.1×10−21=0.20x20x=sqrt(1.1×10−21/0.20)=5.5×10−20 M[Zn2+]=[S2−]=5.5×10−20 MTherefore, the precipitating concentration of ZnS is 5.5 × 10−20 M.

Learn more about  equilibrium concentration here:

https://brainly.com/question/32029862

#SPJ11

i think A but if I'm wrong sorry

then if increasing then becoming spread out so letter A

Answer:  The vapor pressure of the solution at [tex]29^0C[/tex] is 29.86 mm Hg

Explanation:

As the relative lowering of vapor pressure is directly proportional to the amount of dissolved solute.

The formula for relative lowering of vapor pressure will be,

[tex]\frac{p^o-p_s}{p^o}=i\times x_2[/tex]

where,

[tex]\frac{p^o-p_s}{p^o}[/tex]= relative lowering in vapor pressure

i = Van'T Hoff factor = 1 (for non electrolytes)

[tex]x_2[/tex] = mole fraction of solute  

=[tex]\frac{\text {moles of solute}}{\text {total moles}}[/tex]

Given : 9 moles of [tex]NH_3[/tex] are dissolved in 50 L or 50000 ml of water

mass of water = [tex]density\times volume = 1g/ml\times 50000ml=50000g[/tex]  

moles of solvent (water) = [tex]\frac{\text{Given mass}}{\text {Molar mass}}=\frac{50000g}{18g/mol}=2778moles[/tex]

Total moles = moles of solute  + moles of solvent = 9 mol + 2778 mol = 2787  

[tex]x_2[/tex] = mole fraction of solute  

=[tex]\frac{9}{2787}=3.2\times 10^{-3}[/tex]

[tex]\frac{29.96-p_s}{29.96}=1\times 3.2\times 10^{-3}[/tex]

[tex]p_s=29.86mmHg[/tex]

Thus the vapor pressure of the solution at [tex]29^0C[/tex] is 29.86 mm Hg

The statement: The claim that "Introduction to General, Organic, and Biochemistry" by Sally Solomon is a real book is: false.

The statement that "Introduction to General, Organic, and Biochemistry" by Sally Solomon is a genuine book is not true. It is important to be cautious of false information and ensure the reliability of sources when seeking knowledge. In this case, the book mentioned does not exist in reality and should not be considered a valid reference. It is crucial to critically evaluate the authenticity of sources and verify the credibility of information presented.

Relying on reputable academic textbooks, peer-reviewed journals, and trustworthy educational websites is essential to ensure accurate understanding of subjects like chemistry. By doing so, we can maintain the integrity and credibility of our research and avoid spreading misinformation.

Therefore, the correct answer is: False.

Learn more about Introduction

brainly.com/question/32034215

#SPJ11

Answer: c) A. 5.606x10²³atoms is the correct answer.

Explanation:

Answer:

help with mine ill help with yours

Answer:

1 calcium atom, 2 nitrogen atoms, and there are 6 oxygen atoms

Explanation:

Answer:

god says dont use any assault language okay?

Explanation: