The graph below represents the motion of four cars, labeled W, X, Y, and Z.
w
Distance
Time
Which car traveled at a constant speed throughout its motion?
O AW
ОВ. Х
О O c.ru
OD. Z
Answers
Answer:
Answer is A
Explanation:
As we know , for constant velocity we get a straight line.
The formula for this problem is s = vt which is similar to a straight line formula like y = mx + c.
If we put here c = 0 we get the formula for distance and velocity.
So the answer is A.
Related Questions
A 20cm x20cm square loop has a resistance of 0.10 ohms. A magnetic field perpendicular to the loop is B= 4t -2t^2, where B is in tesla and t is in seconds. What is the current in the loop at t =0.0s , t=1.0s and t=2.0s?
Answers
The current in the loop at t = 0.0 s, t = 1.0 s and t = 2.0 s are 0 A, 20 A and 0 A respectively.
Given data:
Resistance, R = 0.1 Ω
Length of the square loop, L = 20 cm = 0.2 m
Area of the square loop, A = L² = (0.2)² = 0.04 m²
Magnetic field, B = 4t - 2t²
Current in the loop can be given as:
I = B/R
Let's substitute the given values of B and R in the equation of current to calculate current at different time intervals as follows:1.
At t = 0.0 s:
B = 4(0) - 2(0)²
= 0I = B/R
= 0/0.1 = 0 As the current at t = 0.0 s is zero.
2. At t = 1.0 s:
B = 4(1) - 2(1)²
= 2I = B/R
= 2/0.1 = 20 A As the current at t = 1.0 s is 20 A.
3. At t = 2.0 s:
B = 4(2) - 2(2)²
= 0I = B/R
= 0/0.1 = 0 As the current at t = 2.0 s is zero.
Therefore, the current in the loop at t = 0.0 s, t = 1.0 s and t = 2.0 s are 0 A, 20 A and 0 A respectively.
To know more about current refer to:
https://brainly.com/question/1100341
#SPJ11
1. draw a free body diagram of a hanging mass before it is submerged in water. make sure to label your forces.
Answers
The free body diagram of a hanging mass before it is submerged in water includes two labeled forces: the force of gravity acting downward and the tension force acting upward.
When a mass is hanging freely before being submerged in water, it experiences two main forces. Firstly, there is the force of gravity acting downward, which is equal to the mass of the object multiplied by the acceleration due to gravity (mg). This force is responsible for the weight of the mass. Secondly, there is the tension force acting upward, exerted by the string or rope that supports the mass. The tension force is equal in magnitude and opposite in direction to the force of gravity.
In conclusion, the free body diagram of a hanging mass before it is submerged in water consists of two forces: the force of gravity acting downward (mg) and the tension force acting upward. The force of gravity represents the weight of the mass, while the tension force balances the gravitational force to keep the mass in equilibrium.
To know more about Tension force,visit:
https://brainly.com/question/29900235
#SPJ11
pyramid power refers to the belief that placing objects inside pyramidal shapes confer energy that can slow the rate of objects' decay. in order to test how pyramids affect the ability of objects to maintain a charge, you place a sphere of charge -0.2 x 10-9 c and a cube of 0.53 x 10-9 c inside the pyramid. what is the electric flux through the pyramid?
Answers
The electric flux through the pyramid is approximately 37.29 N·m²/C.
To calculate the electric flux through the pyramid, we need to determine the net electric charge enclosed by the pyramid.
The electric flux is given by the equation Φ = q/ε₀, where Φ represents the electric flux, q is the net electric charge enclosed, and ε₀ is the electric constant.
In this case, we have a sphere with a charge of -0.2 x [tex]10^{(-9)}[/tex] C and a cube with a charge of 0.53 x [tex]10^{(-9)}[/tex] C inside the pyramid. The net charge enclosed is the sum of the charges of the sphere and the cube: -0.2 x [tex]10^{(-9)}[/tex] C + 0.53 x [tex]10^{(-9)}[/tex] C = 0.33 x [tex]10^{(-9)}[/tex] C.
Now we can calculate the electric flux using the equation Φ = q/ε₀. The electric constant, ε₀, is a known value (approximately 8.85 x [tex]10^{(-12)}[/tex] C²/N·m²). Plugging in the values, we get Φ = (0.33 x [tex]10^{(-9)}[/tex] C) / (8.85 x [tex]10^{(-12)}[/tex] C²/N·m²).
Simplifying the expression, we find Φ ≈ 37.29 N·m²/C.
Therefore, the electric flux through the pyramid is approximately 37.29 N·m²/C.
To know more about electric flux, refer here:
https://brainly.com/question/14893386#
#SPJ11
An inductor is connected to an AC supply. Increasing the frequency of the supply the current through the inductor. a. decreases b. does not change c. increases
Answers
c. increases; Increasing the frequency of the AC supply through an inductor causes the current through the inductor to decrease.
When an inductor is connected to an AC supply, the behavior of the inductor is determined by its inductive reactance (XL), which depends on the frequency of the supply. The formula for inductive reactance is given by XL = 2πfL, where f is the frequency and L is the inductance of the inductor.
As the frequency of the AC supply increases, the inductive reactance also increases. According to Ohm's law, the current flowing through an inductor is inversely proportional to the inductive reactance. Therefore, as the inductive reactance increases with increasing frequency, the current through the inductor decreases. Similarly, as the frequency decreases, the inductive reactance decreases, and the current through the inductor increases.
Increasing the frequency of the AC supply through an inductor causes the current through the inductor to decrease. This behavior is due to the increase in inductive reactance with higher frequencies. It is important to consider the frequency and its impact on inductive reactance when analyzing the behavior of an inductor in an AC circuit.
To know more about inductor visit:
https://brainly.com/question/31327382
#SPJ11
Which one of the following statements best explains why convection does not occur in solids? A. The molecules in a solid are not free to move throughout the volume of the solid. B. Molecules in a solid vibrate at a lower frequency than those in a liquid. C. Solids are less compressible than gases. D. Molecules in a solid are more closely spaced than in a gas.
Answers
The molecules in a solid are not free to move throughout the volume of the solid.
In solids, the molecules are closely packed, so there is not enough space for the molecules to move around freely, so they can only vibrate in their place. As a result, the molecules are unable to transfer energy by moving from one place to another, which is required for convection to occur. As a result, convection is not feasible in solids. Option A is correct.
A solid is a substance that retains its original form regardless of its container. Solids go to fluids at specific temperatures. 3. adjective. A solid substance is extremely firm or hard.
Know more about solid, here:
https://brainly.com/question/32439212
#SPJ11
The INTRODUCTION, METHODOLOGY AND CALCULATIONS and explanation of the experiment should use formulas from one of these topics as well as information should include one of these topic that works with heron fountain such as gravitational potential energy: 3.1 work of a strength. 3.2 Kinetic energy of a punctual body. 3.3 Power and efficiency. 3.4 Potential energy. 3.5 Forces conservative. 3.6 Conservation of energy. 3.7 Principle of momentum and amount of movement. 3.8 Preservation of the amount of movement. 3.9law of gravitation universal.
1. INTRODUCTION
2. METHODOLOGY
3. CALCULATIONS
Answers
The Heron's fountain demonstrates the principles of fluid mechanics through the transfer of energy between containers. By applying conservation of energy and momentum, the calculations reveal the potential and kinetic energy involved in the system.
Introduction
The Heron’s fountain, named after Heron of Alexandria, a Greek inventor who lived in 1st century AD, is an ancient device that is often used for the purpose of explaining the basic principles of fluid mechanics.
It is a simple device that uses the force of gravity and the laws of physics to create a self-sustaining fountain. The basic idea behind the Heron’s fountain is that the weight of the water in the top container pushes down on the air in the bottom container, forcing the water to flow out of the spout and into the bottom container.
Methodology
The methodology of this experiment involves building a Heron’s fountain and then conducting various experiments to determine the amount of energy that is being transferred between the containers.
The basic components of the Heron’s fountain include three containers of varying sizes, a pump, a spout, and some tubing. The water is pumped into the top container and then flows out of the spout and into the bottom container. The air in the bottom container is then compressed, forcing the water back up into the top container.
Calculations
The calculations for this experiment will involve the use of the principles of conservation of energy and momentum. The basic idea is that the amount of energy that is being transferred between the containers is equal to the change in potential energy and kinetic energy of the water.
The formula for the potential energy of the water is mgh, The formula for the kinetic energy of the water is ½ mv2, The formula for the conservation of momentum is m1v1 + m2v2 = (m1 + m2)v,Learn more about Heron's fountain: brainly.com/question/14582258
#SPJ11
Complete the sentences by selecting the appropriate term for each blank. 1. Common to both Asia and Central America. ____ is known for its ice-cold touch and translucent beauty.
2. The ancient technique of _____ involves shaping metal by hammer blows 3. Made from the teeth and tusks of large mammals, most often elephants. _____ is very rare to come by today. 4. Originally an Asian Invention, ___ is traditionally made from tree sop, which hardens into a smooth, glasslike coating. 5. Native American basket weavers often incorporated a small, barely noticeable imperfection, called Click to enlarge into their works to let spirits enter and exit. jade forging ivory lacquer dau
Answers
1. Common to both Asia and Central America, jade is known for its ice-cold touch and translucent beauty.
2. The ancient technique of forging involves shaping metal by hammer blows.
3. Made from the teeth and tusks of large mammals, most often elephants, ivory is very rare to come by today.
4. Originally an Asian invention, lacquer is traditionally made from tree sap, which hardens into a smooth, glasslike coating.
5. Native American basket weavers often incorporated a small, barely noticeable imperfection, called dau, into their works to let spirits enter and exit.
Determine the jade?Jade, a term commonly associated with Asia and Central America, is prized for its unique characteristics of being cold to the touch and having a translucent beauty.
The ancient technique of forging involves shaping metal through hammer blows, allowing artisans to create intricate and durable objects.
Ivory, which comes from the teeth and tusks of large mammals like elephants, has become increasingly rare and difficult to obtain in modern times due to conservation efforts.
Lacquer, originally invented in Asia, is made by collecting tree sap and applying it in layers that harden into a smooth and glossy finish. Native American basket weavers incorporated a subtle imperfection called dau into their works, believing it served as a portal for spirits to enter and exit the baskets, adding a spiritual element to their creations.
To know more about mammals, refer here:
https://brainly.com/question/31237908#
#SPJ4
Pluto's diameter is approximately 2370 km, and the diameter of its satellite Charon is 1250 km. Although the distance varies, they are often about 1.96×10^4 km apart, center-to-center.
Assuming that both Pluto and Charon have the same composition and hence the same average density, find the location of the center of mass of this system relative to the center of Pluto.
Answers
The center of mass of this system is located roughly 9,578 km away from Pluto's center.
The distance between Pluto and its satellite Charon varies, but it is usually about 1.96 × 104 km apart, center-to-center. Pluto's diameter is roughly 2,370 km, while the diameter of its satellite Charon is 1,250 km.
Given that both Pluto and Charon are made up of the same material and thus have the same average density, we need to find the location of the center of mass of this system in relation to the center of Pluto.
The formula for the location of the center of mass is:
Rcm = (m1r1 + m2r2) / (m1 + m2)
Where, Rcm represents the position of the center of mass, m1 and m2 represent the masses of the objects, and r1 and r2 represent the position vectors of the objects from the reference point.
We can take Pluto as the reference point for our system, and let's call it m1. Charon, on the other hand, is our second object, which we can refer to as m2.
To calculate the position vector for Pluto, we need to set r1 to zero, since Pluto is the reference point. Therefore, r2 will be the only position vector available, with a value of 1.96 × 104 km (as given in the problem).
We must first compute the masses of the two objects before we can continue. Substituting the given values into the formula to find the position of the center of mass of the system.
Rcm = (m1r1 + m2r2) / (m1 + m2)Rcm = (m1 * 0 + m2 * 1.96 × 104) / (m1 + m2)
Since the average densities of the two objects are equal, we can determine their masses using their volumes (since density = mass/volume), which are proportional to the cube of their radii (since volume = 4/3πr³).
m1 = (4/3πr1³) * ρm2 = (4/3πr2³) * ρ
Where, ρ represents the density of the two objects.
r1 = Pluto's radius = diameter/2 = 2370/2 = 1185 kmr2 = Charon's radius = diameter/2 = 1250/2 = 625 km
Substituting these values into the above formulas:
m1 = (4/3π × 1185³) × ρm2 = (4/3π × 625³) × ρ
Since both objects have the same average density, we can cancel out the density from both equations.
m1 = (4/3π × 1185³) = 7.153 × 1018 kgm2 = (4/3π × 625³) = 1.787 × 1018 kg
Now, substituting these values into the center of mass formula to obtain the location of the center of mass of the Pluto-Charon system.
Rcm = (m1r1 + m2r2) / (m1 + m2) Rcm = (7.153 × 1018 kg × 0 + 1.787 × 1018 kg × 1.96 × 104 km) / (7.153 × 1018 kg + 1.787 × 1018 kg) Rcm = 9578 km
Know more about center of mass here:
https://brainly.com/question/8662931
#SPJ11
Galileo's early telescopes revealed the four large moons of Jupiter, the rings of Saturn, and its large moon Titan.
a. True
b. False
Answers
The statement given "Galileo's early telescopes revealed the four large moons of Jupiter, the rings of Saturn, and its large moon Titan." is true because Galileo's early telescopes revealed the four large moons of Jupiter, the rings of Saturn, and its large moon Titan.
Galileo Galilei, an Italian astronomer, made significant observations using his early telescopes. His observations provided evidence to support the heliocentric model of the solar system proposed by Copernicus. With his telescope, Galileo discovered four large moons orbiting Jupiter, which are now known as the Galilean moons: Io, Europa, Ganymede, and Callisto. He also observed and documented the presence of rings around Saturn and identified its largest moon, Titan. These observations revolutionized our understanding of the solar system and provided critical evidence for the heliocentric model.
You can learn more about Galileo Galilei at
https://brainly.com/question/14479486
#SPJ11
What is the voltage of each light bulb individually?
Answers
The voltage drop in each light bulb is determined as; V₁ = 96 V and V₂ = 24 V
What is the voltage of each light bulb?The voltage of each light bulb is calculated by applying ohms law as follows;
V = IR
where;
I is the current flowing in each light bulbR is the total resistance of the bulbs.The total resistance of the bulbs is calculate das;
R = 480 ohms + 120 ohms
R = 600 ohms
The current flowing in the bulbs;
I = V/R
I = 120 / 600
I = 0.2 A
The voltage drop in each light bulb;
V₁ = IR₁ = 0.2 x 480 = 96 V
V₂ = IR₂ = 0.2 x 120 = 24 V
Learn more about voltage drop here: https://brainly.com/question/2491461
#SPJ1
an automobile tire turns at a rate of 10 full revolutions per second and results in a forward linear velocity of 15.5 m/s. what is the radius of the tire?
Answers
The radius of the tire is 0.2475 meters.
What is radius?
The radius is a measure of the distance from the center of a circle or sphere to any point on its circumference or surface, respectively. It is a fundamental geometric property of these shapes.
The SI unit for the radius is meters (m).
To find the radius of the tire, we can use the relationship between linear velocity (v) and angular velocity (ω) for an object in circular motion:
v = ω * r,
where v is the linear velocity, ω is the angular velocity, and r is the radius of the tire.
Given that the tire turns at a rate of 10 full revolutions per second, we can convert this to angular velocity using the relationship:
ω = 2π * f,
where ω is the angular velocity and f is the frequency (number of revolutions per second).
Substituting the given values:
ω = 2π * 10 = 20π rad/s.
We are also given that the forward linear velocity of the tire is 15.5 m/s.
Now we can rearrange the formula for linear velocity to solve for the radius:
r = v / ω.
Substituting the given values:
r = 15.5 m/s / (20π rad/s).
Calculating this, we find:
r ≈ 0.2475 m.
Therefore, the radius of the tire is approximately 0.2475 meters.
To learn more about radius,
https://brainly.com/question/9936001
#SPJ4
an astronomer see a blue and a red nebula. what is the likely composition of each nebula?
Answers
When an astronomer sees a blue and a red nebula, the likely composition of each nebula is different. This is because the colors of the nebulae are due to the different elements present in them, as well as the conditions in which they exist.
Blue nebula: Blue nebulae are usually formed due to the presence of ionized helium, nitrogen, and oxygen. These nebulae are hotter, with temperatures that can range between 10,000 to 30,000 Kelvin. The ionization of these gases is caused by the high-energy radiation from nearby hot stars. This radiation strips electrons from the gas atoms, and when they recombine, they release energy in the form of visible light. This light appears blue because blue light has the shortest wavelength and is the easiest to ionize.
Red nebula: Red nebulae are usually formed due to the presence of hydrogen gas. The hydrogen gas absorbs light at a wavelength of 656.3 nanometers, which is red. This absorption is caused by electrons in the hydrogen gas atom transitioning from a high energy level to a low energy level. This transition is known as the H-alpha transition. When this transition happens, the hydrogen gas emits red light, giving the nebula its characteristic red color. Therefore, we can say that the likely composition of a blue nebula is helium, nitrogen, and oxygen, while that of a red nebula is hydrogen.
To know more about nebula visit:
https://brainly.com/question/28655125
#SPJ11
A driver travels northbound on a highway at a speed of 25.0 m/s. A police car, traveling southbound at aspeed of 36.0 m/s approaches with itssiren producing sound at a frequency of 2500 Hz.
(a) What frequency does the driver observe asthe police car approaches?
_____ Hz
(b) What frequency does the driver detect by after the police carpasses him?
____Hz
(c) Repeat parts (a) and (b) for the case when the police car istraveling northbound.
frequency as the police car approaches
_____ Hz
frequency after the police car passes
____ Hz
Answers
(a) The frequency observed by the driver as the police car approaches is 2978 Hz.
(b) The frequency detected by the driver after the police car passes him is 2022 Hz.
(c) When the police car is traveling northbound, the frequency observed by the driver as the police car approaches is 2022 Hz, and the frequency detected by the driver after the police car passes is 2978 Hz.
The observed frequency of a sound wave is affected by the relative motion between the source of the sound and the observer. In this case, the driver is the observer, and the police car is the source of the sound.
(a) As the police car approaches the driver, the frequency observed by the driver is given by the formula:
Observed frequency = Actual frequency * (Speed of sound + Speed of observer) / (Speed of sound - Speed of source)
Using the given values:
Actual frequency = 2500 Hz
Speed of sound = 343 m/s (approximately)
Speed of observer (driver) = 25.0 m/s (northbound)
Speed of source (police car) = 36.0 m/s (southbound)
Substituting these values into the formula, we get:
Observed frequency = 2500 Hz * (343 m/s + 25.0 m/s) / (343 m/s - 36.0 m/s)
≈ 2978 Hz
Therefore, the frequency observed by the driver as the police car approaches is approximately 2978 Hz.
(b) After the police car passes the driver, the frequency detected by the driver is given by the same formula as above, but with the speed of the observer and source switched:
Detected frequency = Actual frequency * (Speed of sound - Speed of observer) / (Speed of sound + Speed of source)
Using the given values, we substitute:
Detected frequency = 2500 Hz * (343 m/s - 25.0 m/s) / (343 m/s + 36.0 m/s)
≈ 2022 Hz
Therefore, the frequency detected by the driver after the police car passes is approximately 2022 Hz.
(c) When the police car is traveling northbound, the same calculations can be applied, but with the speeds reversed:
(a) The frequency observed by the driver as the northbound police car approaches is approximately 2022 Hz.
(b) The frequency detected by the driver after the northbound police car passes is approximately 2978 Hz.
(a) The driver observes a frequency of approximately 2978 Hz as the southbound police car approaches.
(b) The driver detects a frequency of approximately 2022 Hz after the southbound police car passes.
(c) When the police car is traveling northbound, the driver observes a frequency of approximately 2022 Hz as it approaches and detects a frequency of approximately 2978 Hz after it passes.
To know more about speed visit:
https://brainly.com/question/13262646
#SPJ11
A solenoid that is 85.2 cm long has a radius of 1.67 cm and a winding of 1110 turns; it carries a current of 4.46 A. Calculate the magnitude of the magnetic field inside the solenoid.
Answers
Therefore, the magnitude of the magnetic field inside the solenoid is 3.33 × [tex]10^{(-4)[/tex] Tesla (T).
What is magnetic field?
The magnetic field is a fundamental concept in physics that describes the region around a magnet or a current-carrying wire where magnetic forces are experienced. It is a vector field, meaning it has both magnitude and direction.
To calculate the magnitude of the magnetic field inside a solenoid, we can use the formula:
B = μ₀ * N * I / L
Let's plug in the given values:
N = 1110 turns
I = 4.46 A
L = 85.2 cm = 0.852 m
μ₀ = 4π ×[tex]10^{(-7)[/tex] T*m/A
Using these values, we can calculate the magnetic field:
B = (4π ×[tex]10^{(-7)[/tex] T*m/A) * (1110 turns) * (4.46 A) / (0.852 m)
B ≈ 3.33 × [tex]10^{(-4)[/tex] T
Therefore, the magnitude of the magnetic field inside the solenoid is 3.33 × [tex]10^{(-4)[/tex] Tesla (T).
To learn more about magnetic field,
https://brainly.com/question/14848188
#SPJ4
beam are members that carry transverse load and are subjected to bending.
Answers
Beams are structural members that are specifically designed to carry transverse loads and are subjected to bending. They are commonly used in various engineering applications, such as bridges, buildings, and machinery.
When a beam is loaded perpendicular to its longitudinal axis, it experiences bending moments that cause it to deform. This bending can be visualized as the beam curving or flexing under the applied load. The ability of a beam to resist this bending deformation is crucial for its structural integrity. Beams are typically designed to have a cross-sectional shape that maximizes their strength and stiffness while efficiently utilizing the material. Common beam shapes include rectangular, I-shaped (also known as H-beams or W-beams), and circular sections. The selection of the beam shape depends on factors such as the magnitude and distribution of the loads, the span length, and the available materials.
To ensure that beams can withstand the bending forces and support the desired loads, engineers perform calculations and analysis based on principles of structural mechanics, such as Euler-Bernoulli beam theory and moment-curvature relationships. These calculations help determine the required dimensions, material properties, and reinforcement if needed. In summary, beams are structural members specifically designed to carry transverse loads and are subjected to bending. Their shape, size, and material properties are carefully chosen to ensure they can effectively resist bending and support the desired loads in various engineering applications.
Learn more about structural mechanics here:
https://brainly.com/question/29120498
#SPJ11
A small car with mass 0.710 kg travels at constant speed on the inside of a track that is a vertical circle with radius 5.00 m the following figure.(Figure 1)
If the normal force exerted by the track on the car when it is at the top of the track (point B) is 6.00 N, what is the normal force on the car when it is at the bottom of the track (point A)? Express your answer with the appropriate units.
Figure 1
of 1
A
F 28.1
N
5.00 m
Submit
My Answers Give Up
Incorrect; One attempt remaining; Try Again
Provide Feedback
Continue
Answers
The normal force on the car when it is at the bottom of the track (point A) is 28.1 N.
At the bottom of the track (point A), the car is experiencing both its weight (mg) and the centripetal force (mv²/r) directed towards the center of the circular path. The normal force, represented by N, acts perpendicular to the track surface.
To find the normal force at point A, we need to consider the net force acting on the car. The net force is the vector sum of the weight and the centripetal force.
At the bottom of the track, the net force is directed towards the center of the circular path and is given by:
Net force = weight + centripetal force
Net force = mg + (mv²/r)
Since the car is traveling at a constant speed, the net force must be equal to the centripetal force. Therefore:
mv²/r = mg + (mv²/r)
Simplifying the equation, we have:
mv²/r - mv²/r = mg
0 = mg
This means that the net force at point A is equal to zero. Therefore, the normal force (N) at point A must equal the weight of the car, which is given as 28.1 N in the figure. Thus, the normal force on the car at the bottom of the track (point A) is 28.1 N.
To learn more about constant speed, here
https://brainly.com/question/24909693
#SPJ4
calculate the magnitude of the electric field at the center of a square 42.5cm on a side if one corner is occupied by a −38.2μc charge and the other three are occupied by −27.4μc charges.
Answers
The magnitude of the electric field at the center of the square is approximately X N/C.
To calculate the electric field at the center of the square, we need to consider the contributions from each individual charge. The electric field at a point due to a point charge is given by the equation E = k * (|q| / r^2), where E is the electric field, k is Coulomb's constant (9 × 10^9 N m^2/C^2), |q| is the magnitude of the charge, and r is the distance between the charge and the point.In this case, we have one corner occupied by a -38.2 μC charge and the other three corners occupied by -27.4 μC charges. The distance from the center of the square to each charge is the same, as it is equidistant from all corners. By calculating the electric field due to each charge and summing up their contributions (taking into account the direction of the electric fields), we can determine the magnitude of the electric field at the center of the square.
To learn more about electric field:
https://brainly.com/question/11482745
#SPJ11
Two 1.5 kg masses are 1.7 m apart on a frictionless table. Each has +2.1 µC of charge.
(a) What is the magnitude of the electric force on one of the masses?
N
(b) What is the initial acceleration of the mass if it is released and allowed to move?
m/s2
Answers
The magnitude of the electric force on one of the masses is approximately 4.95 × 10^-4 N. the initial acceleration of the mass when it is released and allowed to move is approximately 3.30 × 10^-4 m/s^2.
To find the magnitude of the electric force between the two masses, we can use Coulomb's law:
Electric force (F) = k * |q1 * q2| / r^2
where k is the electrostatic constant (9 × 10^9 N m^2/C^2), q1 and q2 are the charges of the masses, and r is the distance between them.
Given:
Mass (m) = 1.5 kg
Charge (q) = 2.1 µC = 2.1 × 10^-6 C
Distance (r) = 1.7 m
(a) Magnitude of the electric force on one of the masses:
F = (9 × 10^9 N m^2/C^2) * |(2.1 × 10^-6 C) * (2.1 × 10^-6 C)| / (1.7 m)^2
F ≈ 4.95 × 10^-4 N
Therefore, the magnitude of the electric force on one of the masses is approximately 4.95 × 10^-4 N.
(b) To find the initial acceleration of the mass when it is released and allowed to move, we can use Newton's second law:
F = m * a
where F is the net force and a is the acceleration.
In this case, the only force acting on the mass is the electric force, so the net force is equal to the electric force. Therefore:
F = 4.95 × 10^-4 N (from part a)
Now we can substitute the values into the equation:
4.95 × 10^-4 N = (1.5 kg) * a
Solving for a:
a = (4.95 × 10^-4 N) / (1.5 kg)
a ≈ 3.30 × 10^-4 m/s^2
Therefore, the initial acceleration of the mass when it is released and allowed to move is approximately 3.30 × 10^-4 m/s^2.
To learn more about electric force click here
https://brainly.com/question/20935307
#SPJ11
A 10 kg box is pulled along a horizontal surface by a force of 40.0 N which is applied at an angle of 30.0° with respect to the horizontal. The coefficient of kinetic friction between the surfaces is 0.30. What is the horizontal acceleration of the box?
Answers
A 40.0 N force at 30.0° is applied to a 10 kg box on a horizontal surface with kinetic friction coefficient of 0.30. The box's horizontal acceleration is roughly 0.524 m/s².
To find the horizontal acceleration of the box, we need to analyze the forces acting on it and apply Newton's second law of motion.
Given:
Mass of the box (m) = 10 kg
Applied force (F) = 40.0 N
Angle of applied force (θ) = 30.0°
Coefficient of kinetic friction (μk) = 0.30
First, we need to resolve the applied force into horizontal and vertical components. The horizontal component of the applied force can be calculated as:
[tex]F_horizontal[/tex] = F * cos(θ)
[tex]F_horizontal[/tex] = 40.0 N * cos(30.0°)
≈ 34.64 N
The vertical component of the applied force can be calculated as:
[tex]F_vertical[/tex] = F * sin(θ)
[tex]F_vertical[/tex] = 40.0 N * sin(30.0°)
= 20.0 N
The force of kinetic friction ([tex]F_friction[/tex]) can be calculated using the equation:
[tex]F_friction[/tex] = μk * N
where N is the normal force exerted by the surface on the box. In this case, since the box is on a horizontal surface, the normal force (N) is equal to the weight of the box:
N = m * g
where g is the acceleration due to gravity (approximately 9.8 m/s²).
N = 10 kg * 9.8 m/s²
= 98 N
Substituting the values, we can calculate the force of kinetic friction:
[tex]F_friction[/tex] = 0.30 * 98 N
= 29.4 N
Now, we can calculate the net horizontal force acting on the box:
Net horizontal force = [tex]F_horizontal - F_friction[/tex]
Net horizontal force = 34.64 N - 29.4 N
= 5.24 N
Finally, we can apply Newton's second law of motion to find the horizontal acceleration (a):
Net horizontal force = m * a
5.24 N = 10 kg * a
a ≈ 0.524 m/s²
Therefore, the horizontal acceleration of the box is approximately 0.524 m/s².
To know more about the horizontal component refer here :
https://brainly.com/question/32317959#
#SPJ11
Why can a magnetic monopole not exist, assuming Maxwell's Equations are currently correct and complete?
A : If enclosed by a surface, it would produce a net flux through the surface.
B : It would violate Faraday's Law.
C : It would require that a magnetic field exist in the presence of an electric field.
D : It would not produce any magnetic flux.
Answers
If enclosed by a surface, it would produce a net flux through the surface that's why a magnetic monopole not exist, assuming Maxwell's Equations are currently correct and complete.
Hence, the correct option is A.
According to Maxwell's Equations, specifically Gauss's Law for Magnetism, the total magnetic flux through any closed surface is always zero. This means that magnetic field lines always form closed loops, and there are no isolated magnetic charges or magnetic monopoles.
If a magnetic monopole were to exist, it would act as a source or sink of magnetic flux, resulting in a non-zero net magnetic flux through a closed surface. This would directly contradict Gauss's Law for Magnetism and the fundamental principles of Maxwell's Equations.
Option B is not the correct answer because the existence of a magnetic monopole would not necessarily violate Faraday's Law. Faraday's Law relates the change in magnetic flux through a surface to the induced electromotive force (EMF) and the rate of change of magnetic flux. It does not explicitly address the existence or non-existence of magnetic monopoles.
Option C is also not the correct answer because the presence of an electric field does not necessarily require the existence of a magnetic monopole. Electric and magnetic fields are interconnected through Maxwell's Equations, but the absence of magnetic monopoles does not preclude the existence of electric fields.
Option D is not the correct answer because a magnetic monopole, if it existed, would indeed produce magnetic flux. In fact, the presence of a magnetic monopole would result in a non-zero net magnetic flux through a closed surface, which is precisely why it cannot exist according to Maxwell's Equations.
Hence, the correct option is A.
To know more about Maxwell's Equations here
https://brainly.com/question/31815029
#SPJ4
create a hypothesis about whether bags will gain or lose mass.
Answers
A hypothesis about whether bags will gain or lose mass: The hypothesis is that bags will lose mass.
Based on observations and common knowledge, a hypothesis can be formulated regarding the mass of bags. When bags are subjected to various factors such as handling, transportation, and exposure to environmental conditions, it is likely that they will lose mass. This can be attributed to several factors:
Evaporation: If the bags contain any moisture or liquids, they may experience evaporation over time, leading to a decrease in mass.
Leakage: Bags that contain perishable or liquid items may experience leakage or seepage, resulting in a loss of mass.
Wear and tear: Bags can undergo physical damage during handling and transportation, leading to the loss of small particles or fragments, which contributes to a reduction in overall mass.
Absorption: In some cases, bags may absorb moisture or substances from the environment, which can cause a decrease in mass.
Therefore, considering these factors, the hypothesis is that bags will generally lose mass rather than gain it. However, it is important to note that the specific conditions and materials of the bags can affect the outcome, and further experimentation and data collection may be necessary to validate the hypothesis.
To know more about hypothesis, refer here:
https://brainly.com/question/31175803#
#SPJ11
3. A 3-g bullet is fired horizontally into a 10-kg block of wood suspended by a rope from the ceiling. The block swings in an arc, rising 3 mm above its lowest position. What was the velocity of the bullet? 4. Sphere A has mass an and is moving with velocity v = 6 m/s. It makes a head-on elastic collision with a stationary sphere B of mass 2m. After the collision, what are their speeds (V_s, and va?
Answers
Before the collision, the total system energy is only the kinetic energy of the bullet because the block is stationary. After the collision, the speed of the block and the bullet is 808.58 m/s.
After the collision, the bullet and the block move together with a velocity, let’s say v. Because of this initial speed, the system begins to oscillate because it is stabilized by the rope, and the oscillation amplitude is
A = 3mm = 0.003 m.
At this point, we only have potential energy, which is equal to the kinetic energy of the system at the moment of impact. Here, m_b = the mass of the bullet, m_B = the block’s mass, and M = the total mass.
[tex]K.E = P.E\\ \frac{1}{2}Mv^2 = Mgh \\ v = \sqrt{2gh} = \sqrt{2*9.8*0.003} = 0.2425 m/s[/tex]
Now, the momentum must be conserved. The momentum of the bullet before and after the collision is equal.
[tex]m_b v_i = Mv \\ 0.003v_i = 10.003*0.2425 \\ v_i = 808.58m/s[/tex]
To learn more about energy, refer to the link:
https://brainly.com/question/1932868
#SPJ4
a child's far point is 127 cm and her near point is 15.0 cm. in what follows, we assume that we can model the eye as a simple camera, with a single thin lens forming a real image upon the retina. We also assume that the child's eyes are identical, with each retina lying 1.80 cm from the eye's "thin lens." (a) What is the power, P, of the eye when focused upon the far point? (Enter your answer in diopters.) ____ diopters (b) What is the power, P, of the eye when focused upon the near point? (Enter your answer in diopters.) _____ diopters (c) What power in diopters) must a contact lens have in order to correct the child's nearsightedness? (Assume that the object distance is infinite) _________ diopters (d) Is this contact lens a corwerging or diverging lens? O converging O diverging
Answers
(a) The power of the eye, when focused on the far point, is approximately 0.79 diopters.
(b) The power of the eye, when focused on the near point, is approximately 6.67 diopters.
(c) The contact lens must have a power of approximately 5.88 diopters to correct the child's nearsightedness.
(d) The contact lens is a diverging lens. Option B is the correct answer.
The power of the child's eye when focused on the far point is 0.79 diopters, indicating its ability to refract light. When focused on the near point, the eye has a power of 6.67 diopters, reflecting its increased refractive power to bring close objects into focus.
To correct the child's nearsightedness, a contact lens with a power of 5.88 diopters is needed. This lens will diverge the incoming light to compensate for the eye's excessive focusing power, enabling the child to see distant objects clearly. Thus, the contact lens required is a diverging lens, counteracting the eye's nearsightedness and providing the necessary correction.
Learn more about diverging lenses at
https://brainly.com/question/31480064
#SPJ4
investigation 10b question 01 a. warm b. cold c. stationary d. occluded
Answers
In weather systems, an occluded front occurs when a fast-moving cold front overtakes a slower-moving warm front.
Explanation: When an occluded front forms, a cold front catches up to a warm front, lifting the warm air mass off the ground. This interaction creates a complex weather system characterized by a combination of warm and cold air masses. As the colder air overtakes the warm air, it creates a wedge of cooler air between the two fronts. This lifting of warm air can lead to the formation of clouds and precipitation along the front. The occluded front is typically associated with the deterioration of weather conditions, often bringing a mix of rain, snow, or sleet. The type of precipitation depends on the temperature contrast between the air masses involved. Occluded fronts are commonly found in mid-latitude cyclones and are indicative of mature or decaying storm systems. Understanding the characteristics and behavior of occluded fronts is important in weather forecasting and predicting the associated weather patterns.
To learn more about warm front, Click here:
https://brainly.com/question/19611205
#SPJ11
Which of the following are mechanisms or factors involved in producing the observed wind in the lower atmosphere (choose all that apply)?
uneven heating of Earth's surface
the rising of air over cooler regions
the difference in heating rates between land and adjacent bodies of water
the horizontal movement of air between hot and cold regions
convection
Answers
The mechanisms or factors involved in producing the observed wind in the lower atmosphere include uneven heating of Earth's surface, the rising of air over cooler regions, the difference in heating rates between land and adjacent bodies of water, the horizontal movement of air between hot and cold regions, and convection.
The following mechanisms or factors are involved in producing the observed wind in the lower atmosphere:
1. Uneven heating of Earth's surface: Differential heating of Earth's surface by the Sun is one of the primary drivers of wind. Different surfaces, such as land and water, absorb and release heat at different rates, leading to variations in air temperature and pressure, which in turn generate wind.
2. The rising of air over cooler regions: Cooler regions tend to have denser air, which sinks. As a result, warmer air from surrounding areas flows upward to replace it, creating vertical air movements and contributing to wind patterns.
3. The difference in heating rates between land and adjacent bodies of water: Land and water have different thermal properties. Land heats up and cools down more rapidly than water.
This disparity in heating and cooling rates leads to temperature contrasts between land and adjacent bodies of water, causing air to flow from areas of higher pressure (land) to areas of lower pressure (water), generating winds.
4. The horizontal movement of air between hot and cold regions: Temperature differences between hot and cold regions generate pressure gradients. Air moves from areas of high pressure (cold regions) to areas of low pressure (hot regions), resulting in horizontal wind flow.
5. Convection: Convection refers to the vertical movement of air due to temperature variations. As air near the surface becomes heated, it expands, becomes less dense, and rises. The rising air creates an upward movement, leading to the development of convection currents and the formation of wind.
Learn more about atmosphere:
https://brainly.com/question/24925283
#SPJ11
Calculate the energy of an electron with mass 9.109 x 10
kg confined in a 2-dimensional box with sides of length 1.50 nm given quantum numbers nx = 1 and ny= 3.
Enx1 ny = _____J
Calculate the energy of a hydrogen atom confined to the same 2-dimensional box with the same quantum numbers.
Enx1 ny = _____J
Answers
The energy of an electron is 1.50 nm and the quantum number is 2.47 x 10^(-20) J. The energy of a hydrogen atom with the same quantum number is 5.04 x 10^(-20) J.
The energy of a particle confined in a 2-dimensional box is given by the formula:
E = (h^2 / 8m) * (n_x^2 / L_x^2 + n_y^2 / L_y^2)
where:
E is the energy of the particle,
h is Planck's constant (approximately 6.626 x 10^(-34) J·s),
m is the mass of the particle,
n_x and n_y are the quantum numbers,
L_x and L_y are the lengths of the sides of the box.
For the electron:
Given:
m = 9.109 x 10^(-31) kg (mass of an electron),
n_x = 1,
n_y = 3,
L_x = L_y = 1.50 nm = 1.50 x 10^(-9) m.
Plugging the values into the formula, we have:
E = (6.626 x 10^(-34) J·s)^2 / (8 * 9.109 x 10^(-31) kg) * ((1^2 / (1.50 x 10^(-9) m)^2) + (3^2 / (1.50 x 10^(-9) m)^2))
Calculating this expression will give us the energy of the electron confined in the 2-dimensional box.
For the hydrogen atom:
The mass of a hydrogen atom (H) is approximately 1.673 x 10^(-27) kg.
Using the same formula as before, but substituting the mass of the hydrogen atom, we can calculate the energy of the confined hydrogen atom.
The energy of an electron confined in a 2-dimensional box with sides of length 1.50 nm and quantum numbers nx = 1 and ny = 3 are approximately 2.47 x 10^(-20) J.
The energy of a hydrogen atom confined to the same 2-dimensional box with the same quantum numbers (nx = 1 and ny = 3) is approximately 5.04 x 10^(-20) J.
To learn more about electrons, visit
https://brainly.com/question/13998346
#SPJ11
what is the phase angle between the source voltage and current at the cutoff frequency?
Answers
The phase angle between the source voltage and current at the cutoff frequency depends on the specific circuit or system being considered.
In general, at the cutoff frequency of a filter or a resonant circuit, the phase angle between the source voltage and current can vary depending on the type of circuit and its components.
For example, in a simple RC (resistor-capacitor) circuit, the phase angle at the cutoff frequency is typically -45 degrees or [tex]-\frac{\pi}{4}[/tex] radians, indicating that the current lags behind the voltage. In an RL (resistor-inductor) circuit, the phase angle can be +45 degrees or [tex]+\frac{\pi}{4}[/tex] radians, indicating that the current leads the voltage.
It's important to note that the phase angle at the cutoff frequency can be different for different circuit configurations and frequency response characteristics. Therefore, without specific information about the circuit or system in question, it is not possible to determine the exact phase angle at the cutoff frequency.
To know more about the phase angle refer here :
https://brainly.com/question/7956945#
#SPJ11
The number of complete waveforms passing a given point per unit time is called:______
Answers
The number of complete waveforms passing a given point per unit time is called frequency.
Frequency is a fundamental concept in wave motion and refers to the rate at which a wave oscillates or repeats within a specified time interval. It is typically measured in units of hertz (Hz), which represents the number of cycles or waveforms completed per second.
In other words, frequency measures how often a wave oscillates or completes a full cycle in a given amount of time. It represents the temporal aspect of a wave and determines the pitch of a sound wave or the color of light waves, among other characteristics.
For example, in the context of sound waves, a higher frequency corresponds to a higher pitch, while a lower frequency corresponds to a lower pitch. In electromagnetic waves, such as visible light, different frequencies correspond to different colors.
The relationship between frequency (f), wavelength (λ), and the speed of the wave (v) is given by the equation:
v = f * λ
where v is the velocity of the wave. This equation shows that frequency and wavelength are inversely proportional. As the frequency increases, the wavelength decreases, and vice versa.
In summary, frequency measures the number of complete waveforms passing a given point per unit time and is a key parameter for characterizing various types of waves, including sound waves, light waves, and electromagnetic waves.
Here you can learn more about frequency
https://brainly.com/question/29739263#
#SPJ11
When 1.0 kg of steam at 100°C condenses to water at 100°C, what is the change in entropy of the steam? The latent heat of vaporization of water is 22.6 x 105 J/kg. (Exponents do not display properly). • 6.1 x 10 3J/K • -6.1 x 103J/K • -226 x 10 5J/K • 22.6 x 10 5J/K • zero
Answers
The change in entropy of the steam when it condenses to water at 100°C is approximately 6.1 x [tex]10^{3}[/tex] J/K.
Therefore, the correct answer is 6.1 x [tex]10^{3}[/tex] J/K.
To find the change in entropy of the steam when it condenses to water at 100°C, we can use the formula
ΔS = Q / T,
where ΔS is the change in entropy, Q is the heat transferred, and T is the temperature.
Given:
Mass of steam (m) = 1.0 kg
Latent heat of vaporization of water (L) = 22.6 x [tex]10^{5}[/tex] J/kg
Temperature (T) = 100°C = 373 K
The heat transferred (Q) during condensation can be calculated using the formula:
Q = m * L,
Substituting the given values, we get:
Q = 1.0 kg * 22.6 x [tex]10^{5}[/tex] J/kg
Now, we can calculate the change in entropy (ΔS):
ΔS = Q / T
Substituting the values, we get:
ΔS = (1.0 kg * 22.6 x [tex]10^{5}[/tex] J/kg) / 373 K
Calculating this expression:
ΔS = 6.1 x [tex]10^{3}[/tex] J/K
Hence, the change in entropy of the steam when it condenses to water at 100°C is approximately 6.1 x [tex]10^{3}[/tex] J/K. Therefore, the correct answer is 6.1 x [tex]10^{3}[/tex] J/K.
To know more about entropy here
https://brainly.com/question/31842813
#SPJ4
if weight=gravitational force
why does weight= mass*gravitational field strength like aren't gravitational force and gravitational field strength and weight all the same?? pls someone help I have exams tmr
Answers
Answer:
While weight, gravitational force, and gravitational field strength are related concepts, they are not the same thing. Let's clarify their definitions and relationships:
Mass: Mass is a fundamental property of matter and represents the amount of material in an object. It is a scalar quantity and is measured in kilograms (kg). Mass is independent of the location of the object and is the same regardless of the gravitational field it is in.
Gravitational Field Strength: Gravitational field strength (g) represents the intensity of the gravitational field at a specific location. It is a vector quantity and is measured in meters per second squared (m/s^2). Gravitational field strength depends on the mass of the celestial body (such as the Earth) creating the gravitational field and the distance from the center of that body. On the surface of the Earth, the average gravitational field strength is approximately 9.8 m/s^2.
Weight: Weight is the force exerted on an object due to gravity. It is a vector quantity and is measured in newtons (N). Weight depends on both the mass of the object and the gravitational field strength at the location of the object. The formula for weight is given by the equation: weight = mass * gravitational field strength.
To clarify the relationship between these concepts, consider the following example: If you have an object with a mass of 10 kg on the surface of the Earth (where the gravitational field strength is approximately 9.8 m/s^2), the weight of the object would be approximately 98 N (weight = 10 kg * 9.8 m/s^2).
So, while weight is determined by multiplying the mass of an object by the gravitational field strength, they are distinct concepts. Weight is the force experienced by an object due to gravity, whereas gravitational field strength represents the intensity of the gravitational field at a specific location.