Use the Laplace transform to solve the given equation. y" - 2y' + y = et, y(0) = 0, y'(0) = 7 y(t) = et - ecos (t) + 10e¹sin t

The equation for the time of the trip, t, as a function of the speed, s, is t = (50/s) + (75/(s-10)).

To find the equation for the time of the trip as a function of the speed of the car before slowing down, we need to consider two parts of the journey. The first part is driving 50 miles at the original speed, which takes (50/s) hours, where s is the speed. The second part is driving 75 miles at a slower speed of (s-10) mph, which takes (75/(s-10)) hours.

To calculate the total time, we add the times for both parts: t = (50/s) + (75/(s-10)). This equation allows us to determine the time of the trip for any given speed before slowing down.

To learn more about  function

Click here brainly.com/question/17085093

#SPJ11

In a group of 62 students, 27 are normal, 13 are abnormal, and 32 are normal-abnormal. We want to find the probability that a student picked at random is either normal or abnormal.

To calculate this probability, we need to consider the total number of students who are either normal or abnormal. This includes the students who are solely normal (27), solely abnormal (13), and those who are both normal and abnormal (32). We add these numbers together to get the total count of students who fall into either category, which is 27 + 13 + 32 = 72.

The probability of picking a student who is either normal or abnormal can be calculated by dividing the total count of students who are either normal or abnormal by the total number of students in the group. Therefore, the probability is 72/62 = 1.1613.

To find the probability of picking a student who is either normal or abnormal, we consider the total number of students falling into those categories. Since a student can only be classified as either normal, abnormal, or normal-abnormal, we need to count the students falling into each category and add them together. Dividing this sum by the total number of students gives us the probability. In this case, the probability is greater than 1 because there seems to be an error in the provided data, where the total count of students who are either normal or abnormal (72) exceeds the total number of students in the group (62).

To know more about probability  click here:  brainly.com/question/31828911

#SPJ11

Answer:

Approximately 19 bags of sand will be required.

Step-by-step explanation:

The statement misses the drawing of the sandbox which I have attached here. We can find the dimensions mentioned in the picture.

Length of box = 6.5 feet

Width of box = 5 ft

Height of box = 1.5 ft

Calculating the volume = V = length x width x height = 6.5 x 5 x 1.5 = 48.75 cubic ft

As given in the question, one sand bag has 2.6 cubic ft of sand

No of bags required = 48.75 / 2.6 = 18.75

1)The average return for X is 14.9% and for Y is 21.84%.

2)The variance for X is 48.74 and for Y is 149.64.

3)The standard deviation for X is 6.98% and for Y is 12.23%.

What is Standard Deviation?

Standard deviation is a statistical measure that quantifies the amount of variability or dispersion in a dataset. It measures how spread out the values in a dataset are around the mean or average value. A low standard deviation indicates that the data points are close to the mean, while a high standard deviation indicates that the data points are spread out over a wider range.

[tex]\begin{document}\begin{tabular}{ccc}\topruleYear & X (\%) & Y (\%) \\\midrule1 & 22.1 & 27.3 \\2 & 17.1 & 4.1 \\3 & 10.1 & 29.3 \\4 & 20.2 & 15.2 \\5 & 5.1 & 33.3 \\\bottomrule\end{tabular}[/tex]

[tex]\textbf{1. Calculate the average returns for X and Y:}[/tex]

To calculate the average return for X, we sum up all the returns for X and divide by the number of observations:

[tex]\[\text{Average return for X} = \frac{{22.1 + 17.1 + 10.1 + 20.2 + 5.1}}{5} = 14.9\%\][/tex]

To calculate the average return for Y:

[tex]\[\text{Average return for Y} = \frac{{27.3 + 4.1 + 29.3 + 15.2 + 33.3}}{5} = 21.84\%\][/tex]

Therefore, the average return for X is 14.9% and for Y is 21.84%.

[tex]\textbf{2. Calculate the variances for X and Y:}[/tex]

To calculate the variance for X, we need to calculate the squared differences between each return and the average return for X, sum them up, and divide by the number of observations minus one:

[tex]\[\text{Variance for X} = \frac{{(22.1 - 14.9)^2 + (17.1 - 14.9)^2 + (10.1 - 14.9)^2 + (20.2 - 14.9)^2 + (5.1 - 14.9)^2}}{5-1} = 48.74\][/tex]

To calculate the variance for Y:

[tex]\[\text{Variance for Y} = \frac{{(27.3 - 21.84)^2 + (4.1 - 21.84)^2 + (29.3 - 21.84)^2 + (15.2 - 21.84)^2 + (33.3 - 21.84)^2}}{5-1} = 149.64\][/tex]

Therefore, the variance for X is 48.74 and for Y is 149.64.

[tex]\textbf{3. Calculate the standard deviations for X and Y:}[/tex]

To calculate the standard deviation for X, we take the square root of the variance for X:

[tex]\[\text{Standard deviation for X} = \sqrt{48.74} \approx 6.98\%\][/tex]

To calculate the standard deviation for Y:

[tex]\[\text{Standard deviation for Y} = \sqrt{149.64} \approx 12.23\%\][/tex]

Therefore, the standard deviation for X is 6.98% and for Y is 12.23%.

Learn more about Standard Deviation:

https://brainly.com/question/29808998

#SPJ4

Answer:

[tex]\frac{4}{9}[/tex]

Step-by-step explanation:

[tex](\frac{2}{3} )^{2} =\frac{2^2}{3^2} =4/9[/tex]

Hope that helps :)

To determine the value of b in the expression x^2b(x - 7)^2, we can compare it with the given equivalent expression x^2b49. By equating the two expressions, we can solve for b.

In the given expression x^2b(x - 7)^2, we can simplify it by multiplying the exponents:

x^2 * b * (x - 7)^2 = x^2b(x^2 - 14x + 49)

Comparing this with the equivalent expression x^2b49, we can equate the coefficients of the like terms:

x^2b(x^2 - 14x + 49) = x^2b49

From this equation, we can see that the coefficient of the x term is -14b. For it to be equivalent to 49, we have:

-14b = 49

Solving for b, we divide both sides by -14:

b = -49/14 = -7/2

Therefore, the value of b is -7/2.

To know more about algebraic expressions  click here: brainly.com/question/28884894

#SPJ11

The correct interpretation of the given 90% confidence interval ($150, $250) is:

"We are 90% confident that the mean amount spent on groceries among the 1,200 households is between $150 and $250."

Given that a random sample of 1,200 households are selected to estimate the mean amount spent on groceries weekly. A 90% confidence interval was determined from the sample results to be ($150, $250).

This interpretation accurately reflects the concept of a confidence interval. It means that if repeat the sampling process multiple times and construct 90% confidence intervals, approximately 90% of those intervals would contain the true population mean amount spent on groceries. However, it does not imply that there is a 90% chance for any specific household or the mean to fall within this interval.

It is important to note that the interpretation refers specifically to the mean amount spent on groceries among the 1,200 households in the sample. It does not provide information about individual households or the entire population of households.

Therefore, the correct interpretation of the given 90% confidence interval ($150, $250) is:

"We are 90% confident that the mean amount spent on groceries among the 1,200 households is between $150 and $250."

Learn more about confidence intervals, click here:

https://brainly.com/question/29738242

#SPJ4

This coefficient is not defined, since k must be a non-negative integer. Therefore, the coefficient of the y¹²⁰ x² term in the expansion of (y + 3x)²² is 0.

The binomial formula is used to expand binomials of the form (a + b)ⁿ, where a, b, and n are integer.

In general, the formula is given by:

[tex]$(a+b)^n=\sum_{k=0}^{n}{n \choose k}a^{n-k}b^k$[/tex]

The coefficient of the y¹²⁰ x² term in the expansion of (y + 3x)²² can be found by using the binomial formula.

To find this coefficient, we need to determine the value of k for which the term [tex]y^{22-k} (3x)^k[/tex] has y¹²⁰x²  as a product.

Let's write out the first few terms of the expansion of (y + 3x)²²:

[tex]$(y + 3x)^{22} = {22 \choose 0}y^{22}(3x)^0 + {22 \choose 1}y^{21}(3x)^1 + {22 \choose 2}y^{20}(3x)^2 + \cdots$[/tex]

Notice that each term in the expansion has the form {22 choose k}[tex]y^{22-k} (3x)^k[/tex]

Thus, the coefficient of the y¹²⁰ x²  term is given by the binomial coefficient {22 choose k}, where k is the value that makes 22 - k equal to the exponent of y in y¹²⁰  (i.e., 120). Therefore, we have:

22 - k = 120k = 22 - 120k = -98

Thus, the coefficient of the y¹²⁰ x² term is given by the binomial coefficient {22 choose -98}.

However, this coefficient is not defined, since k must be a non-negative integer. Therefore, the coefficient of the y¹²⁰ x² term in the expansion of (y + 3x)²²  is 0.

To know more about binomials formula, visit:

https://brainly.com/question/30100288

#SPJ11

Answer:

1. 100% Rr is the genotype. Phenotype would be red rose.

2. Genotype is 100% Rr. Phenotype is Tall bean.

3. Genotypes are Rr or rr. 50/50 chance of getting either one. Phenotype would be red rose if the genotype is Rr, phenotype would be white rose if the genotype is rr.

reply to this answer if you would like instructions for how to fill out the squares.

Step-by-step explanation:

the capital letters have to do with dominant genes. the lower case letters have to do with not dominant genes. if you have Rr, it would be a dominant gene bc the capital takes over. if you have rr it would be not dominant gene bc there are only lower case. if you have RR it would be dominant gene bc there are only capital letters.

TIP; genotype is the formula (RR, Rr, or rr) phenotype is physical characteristic.

Using the matrix exponential method, the solution to the non-homogeneous IVP y'(t) = -x(t), with initial conditions x(0) = 1 and y(0) = 0, is given by X(t) = [1 - t; -t 1]. Alternatively, solving the system of equations x'(t) = 3y(t) and y'(t) = 3x(t) yields [tex]\[x(t) = \frac{3yt^2}{2} + t\][/tex] and [tex]\[y(t) = \frac{3xt^2}{2}\][/tex] as the solution.

Here is the explanation :

(a) Using the matrix exponential method:

The given system of equations can be written in matrix form as:

X' = A*X + B, where X = [y; x], A = [0 -1; 0 0], and B = [0; -1].

To solve this system using the matrix exponential method, we first need to find the matrix exponential of A*t. The matrix exponential is given by:

[tex]\[e^{At} = I + At + \frac{(At)^2}{2!} + \frac{(At)^3}{3!} + \dotsb\][/tex]

To find the matrix exponential, we calculate the powers of A:

A² = [0 -1; 0 0] * [0 -1; 0 0] = [0 0; 0 0]

A³ = A² * A = [0 0; 0 0] * [0 -1; 0 0] = [0 0; 0 0]

...

Since A² = A³ = ..., we can see that Aⁿ = 0 for n ≥ 2. Therefore, the matrix exponential becomes:

[tex]\[e^{At} = I + At\][/tex]

Substituting the values of A and t into the matrix exponential, we get:

[tex][e^{At} = \begin{bmatrix} 1 & 0 \\ 0 & 1 \end{bmatrix} + \begin{bmatrix} 0 & -t \\ 0 & 0 \end{bmatrix} = \begin{bmatrix} 1 & -t \\ 0 & 1 \end{bmatrix}][/tex]

Now we can find the solution to the non-homogeneous system using the matrix exponential:

[tex]\[X(t) = e^{At} X(0) + \int_0^t e^{A\tau} B d\tau\][/tex]

Substituting the given initial conditions X(0) = [1; 0] and B = [0; -1], we have:

X(t) = [1 -t; 0 1] * [1; 0] + ∫[0, t] [1 -τ; 0 1] * [0; -1] dτ

Simplifying the integral and matrix multiplication, we get:

X(t) = [1 -t; 0 1] * [1; 0] + ∫[0, t] [0; -1] dτ

    = [1 -t; 0 1] * [1; 0] + [-t 1]

Finally, we obtain the solution:

X(t) = [1 -t; -t 1]

(b) Using another method:

Given the system of equations:

x' = 3y

y' = 3x

We can solve this system by taking the derivatives of both equations:

x'' = 3y'

y'' = 3x'

Substituting the initial conditions x(0) = 1 and y(0) = 0, we have:

x''(0) = 3y'(0) = 0

y''(0) = 3x'(0) = 3

Integrating the second-order equations, we find:

x'(t) = 3yt + C₁

y'(t) = 3xt + C₂

Applying the initial conditions x'(0) = 0 and y'(0) = 3, we get:

C₁ = 0

C₂ = 3

Integrating once again, we obtain:

[tex]\[\begin{aligned}x(t) &= \frac{3yt^2}{2} + C_1t + C_3 \\y(t) &= \frac{3xt^2}{2} + C_2t + C_4\end{aligned}\][/tex]

Substituting the initial conditions x(0) = 1 and y

(0) = 0, we have:

C₃ = 1

C₄ = 0

Therefore, the solution to the system is:

[tex]\[\begin{aligned}x(t) &= \frac{3yt^2}{2} + t \\y(t) &= \frac{3xt^2}{2}\end{aligned}\][/tex]

Thus, we have obtained the solutions for x(t) and y(t) using an alternative method.

To know more about the matrix exponential method refer here :

https://brainly.com/question/29729397#

#SPJ11

x'(t)= y(t)-1 1. Solve the non-homogeneous IVP: y'(t)=-X(t) (x(0)= 1,7(0) = 0 a. using the matrix exponential method, b. using any other method of your choice. . Find a Fundamental Matrix 0(t) and solve the IVP: x'= 3y 1 y' = 3* (x(0) = 1, y(0)=0 , for x(t) and y(t).

Answer:

-3

Step-by-step explanation:

(-2)^-3 x (-24)

(-2)^3 becomes 1/(-2)^3 in order to make the negative exponent a positive one.

then, you do 1/-8 (the -8 is the (-2)^3 simplified) x -24

1/-8 x (24) = 24/-8 = -3.

Hope this helps! :)

Answer:

2ax(3b+4)

Step-by-step explanation:

there you go your answer

(A) The average cost per unit when 400 frames are produced is $525.

(B) The marginal average cost at a production level of 400 units is approximately $0.999 per frame. (C) The estimated average cost per frame if 401 frames are produced is approximately $524.19.

(A) Average cost per unit = Total cost / Number of frames

                    = C(x) / x

                    = (50,000 + 400x) / x

Substituting x = 400:

Average cost per unit = (50,000 + 400 * 400) / 400

                    = (50,000 + 160,000) / 400

                    = 210,000 / 400

                    = 525 dollars

So, the average cost per unit when 400 frames are produced is $525.

To find the marginal average cost at a production level of 400 units, we need to calculate the derivative of the average cost function:

(B) Marginal average cost = d/dx [(50,000 + 400x) / x]

                         = (400 - 50,000/x^2) / x

Substituting x = 400:

Marginal average cost = (400 - 50,000/400^2) / 400

                    = (400 - 50,000/160,000) / 400

                    = (400 - 0.3125) / 400

                    = 399.6875 / 400

                    = 0.999

The marginal average cost at a production level of 400 units is approximately 0.999 dollars per frame.

To estimate the average cost per frame if 401 frames are produced, we can use the average cost function:

(C) Average cost per unit = (50,000 + 400x) / x

Substituting x = 401:

Average cost per unit = (50,000 + 400 * 401) / 401

                    = (50,000 + 160,400) / 401

                    = 210,400 / 401

                    ≈ 524.19 dollars

Therefore, the estimated average cost per frame when 401 frames are produced is approximately $524.19.

Learn more about average here: https://brainly.com/question/8501033

#SPJ11

Answer:

0.7

Step-by-step explanation:

The correct answer is option (C): 0.487

Given that the average time to receive an order at a restaurant is 15 minutes, we can use the exponential distribution to calculate the probability of receiving the order in the first 10 minutes.

The exponential distribution is defined by the probability density function (PDF): f(x) = (1/µ) * e^(-x/µ), where µ is the average value or mean.

In this case, the mean (µ) is 15 minutes. We want to find P(a ≤ X ≤ b), where a is 0 (the lower bound) and b is 10 (the upper bound).

To calculate this probability, we need to integrate the PDF from a to b:

P(0 ≤ X ≤ 10) = ∫[0 to 10] (1/15) * e^(-x/15) dx

Integrating this expression gives us:

P(0 ≤ X ≤ 10) = [-e^(-x/15)] from 0 to 10

Plugging in the values, we get:

P(0 ≤ X ≤ 10) = [-e^(-10/15)] - [-e^(0/15)]

Simplifying further:

P(0 ≤ X ≤ 10) = -e^(-2/3) + 1

Using a calculator, we can evaluate this expression:

P(0 ≤ X ≤ 10) ≈ 0.487

For more questions on exponential distribution

https://brainly.com/question/13339415

#SPJ8

Answer:

Q:12) 9m-1.7m =7.3m

Q:13) 1.5m-0.8m=0.7

Q:14) 60cm-30cm= 30cm

Answer:

x = 120°

Step-by-step explanation:

this is a 7-sided polygon and the sum of the interior angles is (7-2)×180° = 900°

add all 7 angles together and set equal to 900

x + 150 + x - 20 + 140 + 120 + x + 20 + 130 = 900

combine 'like terms'

3x + 540 = 900

3x = 360

x = 120

The test statistic is approximately 0.45.

To calculate the test statistic for testing the null hypothesis H₀:p = 0.55 against the alternative hypothesis H₁:p ≠ 0.55, you can use the formula for the z-test statistic:

z = (p' - p) / √(p(1-p)/n)

where:

p' = sample proportion

p = hypothesized proportion under the null hypothesis

n = sample size

In this case, the sample proportion is p' = 55/96 = 0.5729 (rounded to 4 decimal places), p = 0.55, and n = 96.

Now let's calculate the test statistic:

z = (0.5729 - 0.55) / √(0.55 × (1-0.55) / 96)

z = (0.0229) / √(0.55 × 0.45 / 96)

z = (0.0229) / √(0.2475 / 96)

z = (0.0229) / √0.002578125

z = (0.0229) / 0.050773383

z ≈ 0.4502 (rounded to 4 decimal places)

Therefore, the test statistic is approximately 0.45.

Learn more about test statistic click;

https://brainly.com/question/31746962

#SPJ4

Answer:

-1.4  ; -0.7  ; 0.003   ; 3%    ;  0.3   ;  2/3  ;    7/8  ;   100/50

Step-by-step explanation:

0.003 ;  -1.4 ;  100/50 = 2 ;  0.85 ; 2/3 = 0.67  ; 3% = 3/100 = 0.03 ; 7/8 = 0.875 ;

0.3 , -0.7

0.003 ;  -1.4 ;   2 ;  0.85 ;  0.67  ;   0.03 ;   0.875 ; 0.3    ; -0.7

Least to greatest:

-1.4 ; - 0.7   ; 0.003  ;   0.03  ;   0.3   ;  0.67  ; 0.85    ;2

-1.4  ; -0.7  ; 0.003   ; 3%    ;  0.3   ;  2/3  ;    7/8  ;   100/50

Negative numbers have least value.Then  in decimal numbers, the number having the least value in tenth is the least

To determine the percentage of the segment that should participate in the baseball camp in order to make a $1500 profit, we need to calculate the breakeven point and then find the corresponding percentage.

The breakeven point is the point where the revenue equals the total cost, resulting in zero profit. In this case, the breakeven point can be calculated by adding the fixed cost (TFC) to the variable cost per person multiplied by the number of participants.

Given that the price per participant is $80 and the variable cost per person is $5, we can set up the equation:

80x - (5x + 9000) = 0

Simplifying the equation, we have:

75x - 9000 = 0

75x = 9000

x ≈ 120

So, the breakeven point is approximately 120 participants.

To calculate the percentage, we need to divide the breakeven point (120) by the segment size (10000) and multiply by 100:

(120/10000) * 100 ≈ 1.2%

Therefore, the percentage of the segment that should participate in the baseball camp to make a $1500 profit is not exactly 1.2%, but it is closest to option D) about 1.4%.

Learn more about percentage here:

https://brainly.com/question/16797504

#SPJ11

Answer:

[tex] 2 \sqrt{3} [/tex]

Step-by-step explanation:

Geometric mean of 4 and 3

[tex] = \sqrt{4 \times 3} \\ = \sqrt{ {2}^{2} \times 3 } \\ = 2 \sqrt{3} [/tex]

Answer:

x = 45

Step-by-step explanation:

[tex]\frac{x}{5} -7=2\\\\\frac{x}{5}=9\\\\x=45[/tex]

Given the function f(z) = z^4 - 2z^3 + 9z^2 + z - 1. We have to determine the number of zeros of the function in the disk D[0,2].

According to the Fundamental Theorem of Algebra, a polynomial function of degree n has n complex zeros, counting multiplicity. Here, the degree of the given polynomial function is 4. Therefore, it has exactly 4 zeros.Let the zeros of the function f(z) be a, b, c, and d. The function can be written as the product of its factors:$$f(z) = (z-a)(z-b)(z-c)(z-d)$$$$\Rightarrow f(z) = z^4 - (a+b+c+d)z^3 + (ab+ac+ad+bc+bd+cd)z^2 - (abc+abd+acd+bcd)z + abcd$$

According to the Cauchy's Bound, if a polynomial f(z) of degree n is such that the coefficients satisfy a_0, a_1, ..., a_n are real numbers, and M is a real number such that |a_n|≥M>|a_n-1|+...+|a_0|, then any complex zero z of the polynomial satisfies |z|≤1+M/|a_n|.

We can write the polynomial function as $$f(z) = z^4 - 2z^3 + 9z^2 + z - 1 = (z-1)^2(z+1)(z-1+i)(z-1-i)$$The zeros of the function are 1 (multiplicity 2), -1, 1 + i, and 1 - i. We have to count the zeros that are in the disk D[0,2].Zeros in the disk D[0,2] are 1 and -1.Therefore, the number of zeros of the function f(z) = z^4 - 2z^3 + 9z^2 + z - 1 in the disk D[0,2] is 2.

Know more about Fundamental Theorem of Algebra:

https://brainly.com/question/29015928

#SPJ11

The volume of the solid S, where the base is a triangular region and cross-sections perpendicular to the y-axis are semicircles, can be found using calculus. The volume of S is (3π/8) cubic units.

In the first part, the volume of the solid S is (3π/8) cubic units.

In the second part, we can find the volume of S by integrating the areas of the cross-sections along the y-axis. Since the cross-sections are semicircles, we need to find the radius of each semicircle at a given y-value.

Let's consider a vertical strip at a distance y from the x-axis. The width of the strip is dy, and the height of the semicircle is the x-coordinate of the triangle at that y-value. From the equation of the line, we have x = (3/2)y.

The radius of the semicircle is half the width of the strip, so it is (1/2)dy. The area of the semicircle is then[tex](1/2)\pi ((1/2)dy)^2 = (\pi /8)dy^2.[/tex]

To find the limits of integration, we note that the base of the triangle extends from y = 0 to y = 2. Therefore, the limits of integration are 0 to 2.

Now, we integrate the area of the semicircles over the interval [0, 2]:

V = ∫[tex](0 to 2) (\pi /8)dy^2 = (\pi /8) [y^3/3][/tex] (evaluated from 0 to 2) = (3π/8).

Learn more about integration here:

https://brainly.com/question/31744185

#SPJ11

The population of interest in the given scenario is all named storms that have made landfall in the United States since 2000. "All named storms that have made landfall in the United States since 2000".

The given scenario is focusing on determining the mean sustained wind speed of all named storms that have made landfall in the United States since 2000. Therefore, the population of interest in this scenario is all named storms that have made landfall in the United States since 2000. The population of interest is the entire group of individuals, objects, events, or processes that researchers want to investigate to answer their research questions.

The researchers want to determine the mean sustained wind speed of all named storms that have made landfall in the United States since 2000. Hence, they will collect data on the wind speed of all named storms that have made landfall in the United States since 2000, and calculate the mean sustained wind speed for the entire population.

Learn more about research questions: https://brainly.com/question/27824868

#SPJ11

Answer:

6

Step-by-step explanation:

2,400 divided by 4 = 6

The values of  base-ten numerals to the indicated bases are:

a. 861 in base six is 3553.

b. 2157 in base nine is 2856.

c. 131 in base three is 11221.

To convert the base-ten numerals to the indicated bases:

a. 861 in base six:

To convert 861 to base six, we divide the number by six repeatedly and note down the remainder until the quotient becomes zero.

861 ÷ 6 = 143 remainder 3

143 ÷ 6 = 23 remainder 5

23 ÷ 6 = 3 remainder 5

3 ÷ 6 = 0 remainder 3

Reading the remainders in reverse order, the base-six representation of 861 is 3553.

b. 2157 in base nine:

To convert 2157 to base nine, we follow a similar process.

2157 ÷ 9 = 239 remainder 6

239 ÷ 9 = 26 remainder 5

26 ÷ 9 = 2 remainder 8

2 ÷ 9 = 0 remainder 2

Reading the remainders in reverse order, the base-nine representation of 2157 is 2856.

c. 131 in base three:

To convert 131 to base three, we apply the same procedure.

131 ÷ 3 = 43 remainder 2

43 ÷ 3 = 14 remainder 1

14 ÷ 3 = 4 remainder 2

4 ÷ 3 = 1 remainder 1

1 ÷ 3 = 0 remainder 1

Reading the remainders in reverse order, the base-three representation of 131 is 11221.

Therefore:

a. 861 in base six is 3553.

b. 2157 in base nine is 2856.

c. 131 in base three is 11221.

To know more about base-ten numerals refer here:

https://brainly.com/question/24020782

#SPJ11

Answer:

13388

Step-by-step explanation:

12600 will be 100% so we want to get at what price its sold when there is a 15%dicount

So will minus 15% from the 100% of the Mp

100%-15%=85%

so if 100%=12600

what about 85%=?

we crossmultiply

85%×12600/100%=10710

so10710 is what the radio will be sold if a 15% dicount is given but we want to get wat price the shopkeeper got in that he made a profit of25%

so if 100%=10710

what about 125%

125%×10710/100%=13387.5 which is 13388/=