What is the acceleration of a car that slows down from 25.0 m/s to 10.0 m/s in 30 seconds? The car is traveling south.

Answers

Answer 1
100 miles per hour ...........

Related Questions

When the Moon is a distance of 0.25 D from the Earth, the gravitational force on the Moon from Earth is 16.00 Fm. At what distance with the force on the Moon be 4.00 Fm?

Answers

Answer:

When the gravitational force on the Moon from the Earth = 4.00 Fm, the distance of the Moon from the Earth is 0.5·D

Explanation:

The given information includes;

The distance of the moon from the Earth = 0.25·D

The gravitational force, F, on the Moon from the Earth = 16.00 Fm

When the gravitational force on the Moon from the Earth = 4.00 Fm, the distance of the Moon from the Earth is found as follows;

From Newton's law of gravitation;

[tex]F_{1} = F_{2} =G\dfrac{m_{1}m_{2}}{r^{2}}[/tex]

At r = 0.25·D, F = 16.00 Fm

Therefore;

G×m₁×m₂ = (0.25·D)²×16.00 Fm = D²×Fm = Constant

When, the gravitational force of the Moon from the Earth = 4.00 Fm, we have;

[tex]F = 4.00 \ Fm =\dfrac{D^2 \times Fm}{r_2^{2}}[/tex]

Therefore;

[tex]r_2^{2} =\dfrac{D^2 \times Fm}{4.00 \ Fm} = \dfrac{D^2}{4}[/tex]

[tex]r_2 =\sqrt{\dfrac{D^2}{4}} = \dfrac{D}{2} = 0.5 \cdot D[/tex]

r₂ = 0.5·D

Where;

r₂ = The new distance of the Moon from the Earth

Therefore the distance of the Moon from the Earth when the gravitational force on the Moon from the Earth = 4.00 Fm is r₂ = 0.5·D.


A plane flies for 2 hours at a speed of 430 km/hr. How far did the plane travel?

Answers

Answer:

860km

Explanation:

2× 430 = 860km

the rate is 430km per hr. 2 hours means you multiply by 2

Suppose​ s(t) is the position of an object moving along a line at time t0. What is the average velocity between the times ta and t​b?

Answers

Answer:

[tex]V = \frac{s(t_b) - s(t_a)}{t_b -t_a}[/tex]

Explanation:

Given;

position of the object as s(t)

The average velocity is given by;

[tex]V = \frac{s(t_b) - s(t_a)}{t_b -t_a}[/tex]

where;

s(tb) is the object's final position at time tb

s(ta) is the initial position of the object at time ta

tb is the final time of the object's displacement

ta is the initial time of the object's displacement

why sound heard better at night than at day?​

Answers

Answer:

it is because it is quieter at night than in the daytime. Therefore it is easy to hear the sound far away. However, it is only one of the reasons. Actually, sound transmits farther at night may be related to refraction of sound waves! First, sound is the vibration of air, and it is a kind of wave motion.

Explanation:

At night it’s very quiet and during the day most animals are sleeping so they’re not making noises and at night it’s so quiet you could hear farther away

Please Help Me with This

Answers

Answer:

Explanation:

a). Find the graph attached for the motion.

b). If a shopper walk 5.4 m westwards then 7.8 m eastwards,

   Distance traveled by the shopper = Distance traveled in eastwards + Distance traveled westwards

                                                            = 5.4 + 7.8

                                                            = 13.2 m

c). Displacement of the shopper = Distance walked westwards - Distance traveled eastwards

                                                      = 5.4 - 7.8

                                                      = -2.4 m

Therefore, magnitude of the displacement of the shopper is = 2.4 m

And the direction of the displacement is eastwards.

The critical angle for refraction from glass to air is 30° and that from water to air is 37°.Find the critical angle for refraction from glass to water.​

Answers

Answer:

Å

1,55

5 400 Å

n

=

193548,4 km/s

1,55

3 10 m/s

n

c

Vidrio v: =

3 724,14 Å

1,45

5 400 Å

n

=

206 896,5 km/s

1,45

3 10 m/s

n

c

Aceite = v:

07,1

45,1

55,1

n

n

I

Mia is driving at 15m/s. she accelerates for 6sec and reaches 25m/s what is her acceleration

Answers

Answer:

1.67m/s²

Explanation:

acceleration is the change i velocity with respect to time.

Acceleration = change in velocity/time take

Acceleration = final velocity - initial velocity/time taken

Given initial velocity = 15m/s

final velocity = 25m/s

time = 6sec

Substituting the given value into the formula above to get acceleration

acceleration = 25-15/6

acceleration = 10/6

acceleration = 1.67m/s²

Hence Mia acceleration is 1.67m/s²

1. What is the velocity if the displacement is 50 m and the time interval is 10 s?

Answers

Answer:

Velocity=5m/s

Explanation:

V=?

S=50m

t=10s

V=S/t

V=50/10

V=5m/s

Why do prokaryotic cells usually reproduce more quickly than eukaryotic cells?

Choose 1 answer:

(Choice A) A Eukaryotic cells are more structurally complex than prokaryotic cells.

(Choice B) B Eukaryotic cells have less DNA than prokaryotic cells.

(Choice C) C Eukaryotic cells have more cell walls than prokaryotic cells.

(Choice D) D Eukaryotic cells are smaller than prokaryotic cells.

Answers

Prokaryotic cells reproduce more quickly than eukaryotic cells because the latter are more structurally complex. The correct option is A.

Structural complexity of cells

Eukaryotic cells have nuclei and membrane-bound organelles such as mitochondrion. This is unlike prokaryotic cells whose DNA lies freely in the cytoplasm and lacks membrane-bound organelles.

In order words, eukaryotic cells are structurally more complex than prokaryotic cells. Thus, reproductive times in prokaryotes are usually quicker than in eukaryotes.

More on the structural complexity of cells can be found here: https://brainly.com/question/3502696

#SPJ1

What is an example of a concentric contraction

Answers

Answer:

an example is a bicep curl

Explanation:

A concentric contraction is a type of muscle activation that causes tension on your muscle as it shortens. As your muscle shortens, it generates enough force to move an object.

What happens when a substance is heated, based on the particles model ( the particles)

Answers

Answer:When heat is added to a substance, the molecules and atoms vibrate faster. As atoms vibrate faster, the space between atoms increases. The motion and spacing of the particles determines the state of matter of the substance. The end result of increased molecular motion is that the object expands and takes up more space.

Explanation:


What forces come in pairs?

Answers

Answer:

Newton's Third Law of Motion

Explanation:

it explains that forces always come in action-reaction pairs. The Third Law states that for every action force, there is an equal and opposite reaction force

Answer:

newtons third law of motion

Explanation:

newtons third law of motion explains that forces always come in action-reaction pairs

Round each of the following to 3 significant figures.
a) 77.0653 g
c) 0.00023350 m
b) 6,310,028.2 mm
d) 10.2030°C

Answers

Answer:

a. 77.1 g

b.0.000234 m

c. 6310000 mm

d. 10.2°C

Explanation:

if the
D=19.3g/cm^3
v= 1.61 cm^3 what is the mass​

Answers

Answer:

Mass=DV

=19.3g/cm^3 ×1.61cm^3

=31.266g

Explanation:

Mass is the product of an objects density and the space it occupies (volume)

What happens to the charged electroscope when a conductor is moved between its plastic sheets, and why?

Answers

Answer: Please find the answer in the explanation

Explanation:

The question goes thus :

What happens to the charged electroscope when a conductor is moved between its plastic sheets, and why?

When a conductor is moved between its plastic sheets of a charged electroscope, the divergence between the brass plate and the gold leaf will decrease.

And why ?

Because of the unlike charges or neutral uncharged charges between the conductor and the plastic Sheets.

if heat is transferred from gas which could happen

Answers

Life would be a disaster

any push or pull on an object is called (n)

Answers

Answer:  Any push/pull on any object is made by a force of some sort.

Explanation:

An object moves, along a line,from point A to B to C and then back to B
again as shown in the figure below in half an hour.
a) find the average speed of the moving object in km/hr.
b) find the magnitude of the average velocity of the object in km/hr​

help me pleaseddddd!!!​

Answers

Answer:

a). Average speed = 26 km per hour

b). Average velocity = 10 km per hour

Explanation:

a). Distance between A to B = 5 km

    Distance between B to C = 4 km

    Total distance traveled between A to B to C and then back to B

    = 5 + 4 + 4

    = 13 km

Time taken to cover this distance of 13 km = [tex]\frac{1}{2}[/tex] an hour

Therefore, average speed during this trip = [tex]\frac{13}{\frac{1}{2}}[/tex]

                                                                      = 26 km per hour

b). Average velocity = [tex]\frac{\text{Displacement}}{\text{Duration}}[/tex]

   Displacement = (Distance between A to B) + (Distance traveled between B to C) - (Distance traveled from C to B)

                           = 5 + 4 - 4

                           = 5 km towards A

Average velocity = [tex]\frac{5}{\frac{1}{2}}[/tex]

                             = 10 km per hour

mark as brain list answer

A car travels 500 km at an average speed of 120 m/s. How long will the trip take in hours?

Answers

Explanation:

120 m/s × (1 km / 1000 m) × (3600 s / hr) = 432 km/hr

t = (500 km) / (432 km/hr) = 1.16 hr


Which of the following hypotheses is written correctly?*
1.If I heat up a tennis ball it will bounce high.
2.Frozen tennis balls will not bounce as high because they are more dense.
3.If a tennis ball is frozen, it won't bounce as high as one that is not frozen.
4.If I freeze a tennis ball, then it will not bounce as high because the ball is more dense.

Answers

Answer:

4 Because Hypothesis sentence always have to be "If" and Then a "then"

Use the motion map to answer the question, describe the position and velocity of the object based moo the motion map?

Answers

Do you have an image?


answer:

What is the best use of an atomic model to explain the charge of the particles in Thomason beans

Answers

An atom's negative particles are surrounded by positive matter, so the positive particles are easier to remove. Thomson's atom model is formed by positive and negative particles The positive particles are bigger than the negative,but the atom is still in equilibrium,this is possible because they have the same“density if you wanna call it like that。So,the properties of negative particles allow them to move free。On the other hand,bigger particles,don't have free moving like negative particles。That's why electrons(negative particles)are the definition of electricity,because they can move easily,although this movement depend on the material,metal are better to move in than wood or plastic.

Why would you get a more accurate measure of the volume of an irregular solid by using
displacement instead of measuring with a ruler?

Answers

Answer:Displacement method

Explanation:Placing irregular object in a Tube and then measuring the amount of water that either gets displaced from the container or goes up with the creatube and then measuring the amount of water that either gets displaced from the container or goes showing how much volume irregular object is.

In displacement method can be used to accurately measure the volume of oddly shaped objects.

What is the displacement method?

The water displacement method can be described as a system of measurements used to find the volume of an object that has an irregular shape. A graduated cylinder will be used to measure the amount of liquid volume an object filled, but it can be done with less scientific techniques.

In order to determine the volume of an irregularly shaped solid, a person can use the water displacement formula. A container of water would require to be measured accurately, and precisely, with a starting volume of water.

Next, the solid will need to be completely submerged underwater, without any part of the object above the water. The water level has risen, and the final volume of the water requires to be recorded. The starting volume of the container requires to be subtracted from the final volume to get the volume of only the object.

Learn more about the displacement method, here:

https://brainly.com/question/11182072

#SPJ2

Newton's Laws of Motion and Newton's Law of Gravity explain why?
a) the Earth moves around (orbits) the Sun.
b) the Moon moves around Earth
c) an apple from a tree falls down to ground (as opposed to "rising up into the sky")
d) all of the above

Answers

Answer:

D all of the above

Explanation:

This is because newtons laws of motion explains movement of a body due to a force applied while that of gravity explains motion of a body under gravity and this captures a, b, and c

All the given options are following the Newton's laws of motion and Newton's law of gravity separately. All of the above options are correct. Hence, option (d) is correct.  

The given problem is based upon the Newton's law of motion as well as Newton's law of gravity. So let us analyze each of the given cases as:

(a)

The Earth moves around the Sun : This statement follows the Newton's first law of motion, which says that an object will continue its state of motion, until any external force is being applied on the object. Since, Earth is offered with no net force. Therefore, Newton's law is applicable.

(b)

Moon movers around Earth: This statement also follows the above explanation for the Newton's first law. Which makes moon to revolve around the Earth on an account of no net force. Hence, it will continue its circular motion and hence Newton's law of motion is followed.

(c)

An apple falls from a tree: This statement is based on Newton's law of gravity, which says that every particle in the universe attracts other particles such that the force of attraction is directly proportional to the product of their masses and inversely proportional to square of distance between them. Since, Earth has more mass than apply, therefore Earth will attract the apple downwards.

Thus, we can conclude that all the given options are following the Newton's laws of motion and Newton's law of gravity separately. All of the above options are correct. Hence, option (d) is correct.  

Learn more about the Newton's laws of motion here:

https://brainly.com/question/17366362

What is the number at the end of an isotope’s name?

Answers

Explanation:

The liquid contains only one element. -The liquid is a pure substance. The number at the end of an isotope's name is the -mass number. While looking at xenon (Xe) on the periodic table, a student needs to find an element with a smaller atomic mass in the same group.

Which statement describes an energy measurement?
A. Gravity applies 800 N to a person on Earth's surface.
B. A plane accelerates at 4.1 m/s2
C. An object has a mass of 250 kg.
D. One gram of wood stores 16,000 J.​

Answers

The Answer is D.....

The statement that describes an energy measurement is one gram of wood stores 16,000 J, therefore the correct answer is option D

What is thermal energy?

It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.

Thermal energy can be produced with help of various means such as by burning fossil fuels, with the help of solar energy.

The Joule is the recognized unit of measurement for energy (J). Kilowatt/hour (kWh), which is used specifically for electric energy, should be listed among the most used units for measuring energy (in fact it is used to calculate electricity bills). The Terawatt/hour (TWh), or one billion kW/h, is used to calculate the output of big power facilities or the country's consumption.

Thus, The statement that describes an energy measurement is one gram of wood stores 16,000 J, therefore the correct answer is option D

Learn more about thermal energy from here

brainly.com/question/3022807

#SPJ2

In physics lab, you measure three quantities: , , and . Suppose that =1.5 kg , =0.4 m , and =3.9 kg/m . Which of the mathematical combinations might be meaningful?

Answers

Answer:

1.5 kg is mass, .4 m is volume, and 3.9 kg/m is volume

Explanation:

When looking at these types of problems, consider each part. First, whenever problems have measurements that have similar units of measurement, check if they are density related. In this case, we use the formula of D=M/V, where D stands for density, M stands for mass, and V stands for volume. Any measurements that relate to grams or pounds are mass. In solids, volume is written in cm or m, while in liquid, volume is considered in liters and gallons. Density is always mass divided by volume, so we know that 3.9 kg/m is the density due to the units provided.

A stone falls freely from rest for 8.0 s.
a. Calculate the stone's velocity after 8.0 s.
b. What is the stone's displacement during
this time?

Answers

a) The acceleration that the stone has is the gravitational acceleration and it is always the same (Actually not but assumed to be so)

The gravitational acceleration is 9.81 m/s²

Since this acceleration is always constant, we can use the formula of V = g × t, where V is velocity, g is the gravitational acceleration and t is time.

Let's use this formula: V = g × t = 9.81 × 8.0 = 78.48 m/s

b) Displacement in free falls is calculated by the formula of d = 1/2 × g × t², which is actually derivated from average velocity.

If we use the formula, d = 1/2 × 9.81 × 8² = is found to be 313.92 m

If there is anything you do not understand or anything is wrong, please let me know and I am sorry for my bad English ^^

how does this explain the action of a bullet fired from a gun. ​

Answers

Answer:

When a bullet is fired from a gun, the gun exerts a force on the bullet in the forward direction. This is force is called as the action force. The bullet also exerts an equal and opposite force on the gun in the backward direction. Therefore a gun recoils when a bullet is fired from it.

Which option is part of designing a set of experimental procedures

Answers

determining how data will he gathered

Explanation: Apex

Answer:

determining the hypophysis

Explanation:

here you go

Other Questions
What major waterway splits the United States interior in half ? A. Colorado RiverB. Ohio RiverC. Mississippi RiverD. James River What region in Texas is characterized by lots of plant life (such as trees, flowers, and brush), lots of thick forests and hills, and frequent flooding? Which best describes point-by-point paragraph structure?The author introduces each point, followed by evidence and analysis of that point.The author introduces the evidence in the topic sentence and backs it up with a list of points.The author introduces all the evidence and concludes with the most important points.The author introduces the points in list form and provides all the evidence for each point at once. What is the value of x? x=int(13.25 + 4/2) * Plz help 7th grade math A person with a black belt in taekwondo has a foot with a mass of 0.90 kg. Starting from rest, this foot attains a velocity of 8.3 m/s in 0.13 s. What is the magnitude of the average net force applied to the foot to obtain that acceleration? Is the function in the graph non linear? Which department handles the task of finding vendors that will provide goods at the best prices? What is the Answer to 3m+4n How did the reasons for the settlement for Jamestown and the Plymouth Colony differ? If f (x) = 3x 4, Find f (1) Helpp x is greater than -9 and less than or equal to 4 use x only once in your inequality c(a + b)- d = f, for a Which of the following in an example of a Black Code.Group of answer choicesGiving African Americans the right to vote.Prohibiting African Americans from owning firearms.Creating housing for African Americans.Allowing African Americans the right to go to school. what is the remainder when 31,671 divided by 68 What kind of epithelium tissue is this? Which statement describes earthquakes? Positive ion formed when an atom LOSES electrons HELP.....PLEASE!WILL GIVE BRAINLIEST!!! Occasionally, one exits a freeway on the left, but most exit ramps are on the ___________ side of the road.