Boiling point of solution when 0.6 g of urea is dissolved in 100g of water, is 100.052°C.
What is solution?A solution in chemistry is a specific kind of homogenous mixture made up of two or more components. A solute is a material that has been dissolved in the solvent in such a combination. If there are more attractive interactions between the solvent and solute particles than between the solute particles themselves, the solvent particles will surround and separate the solute particles. The particles of the solute that are enclosed by the solid solute subsequently disperse into the solution.When a chemical is added, the boiling point of a liquid (a solvent) will rise, a phenomenon known as boiling-point elevation, which implies that a solution has a higher boiling point.The existence and quantity of dissolved particles have an impact on the boiling point elevation, but the identification of the dissolved particles has no bearing on this attribute.It results from the solvent being diluted when a solute is present. This phenomena is independent of any particular solute-solvent interactions and happens for all solutes in all solutions, even perfect solutions.When the solute is both an electrolyte (like different salts) and a non-electrolyte, the boiling point rises.Urea mass = 0.6 g
Water's mass is 100 g, or 0.1 kg, and its molarity is 0.6/60*0.1, or 0.1 M.
Boiling point increase = Tb
Boiling point of the solution is calculated as Kb*m = 0.52*0.1 = 0.052 K.
Pure water has a boiling point of T = 373 K.
Tb = Tb - T Tb
= Tb + T 373 + 0.052
= 373.052 K
= 100.05 °C
Consequently, the solution's boiling point is 100.052°C.
To know m ore about boiling point of solutions from given link
brainly.com/question/24675373
#SPJ4
Complete question: When 0.6g of urea dissolved in 100g of water, the water will boil at (Kb for water=0.52kJ.mol −1 and normal boiling point of water =100 ∘ C).
how is a new element formed in a star?
Answer:
Some of the heavier elements in the periodic table are created when pairs of neutron stars collide cataclysmically and explode, researchers have shown for the first time. Light elements like hydrogen and helium formed during the big bang, and those up to iron are made by fusion in the cores of stars.
Explanation:
Answer: Some of the heavier elements in the periodic table are created when pairs of neutron stars collide cataclysmically and explode, researchers have shown for the first time. Light elements like hydrogen and helium formed during the big bang, and those up to iron are made by fusion in the cores of stars.
Explanation:
Define boiling point and melting point.
Answer:
The boiling point is the temperature at which a liquid boils and changes into a gas. At the boiling point, the vapor pressure of the liquid is equal to the atmospheric pressure.
The melting point is the temperature at which a solid changes into a liquid. At the melting point, the solid and liquid phases are in equilibrium and the substance can exist in either phase.
The boiling point and melting point of a substance depend on the intermolecular forces between the molecules in the substance. Substances with strong intermolecular forces, such as covalent compounds, tend to have higher boiling points and melting points than substances with weaker intermolecular forces, such as ionic compounds. The boiling point and melting point of a substance also depend on the pressure under which the substance is being heated or cooled. For example, the boiling point of water is lower at high altitudes, where the atmospheric pressure is lower.
how many moles of c12h22o11 are needed to prepare 2.50 l of 0.300 m solution. 0.750 moles 0.430 moles 8.33 moles 1.20 moles
0.750 moles of C12H22O11 are needed to prepare 2.50 L of a 0.300 M solution.
Molarity is a measure of concentration that can be used to determine how many moles of a particular substance are needed to prepare a given volume of a solution with a given concentration. In this problem, we are asked to calculate how many moles of C12H22O11 are needed to prepare 2.50 L of a 0.300 M solution.
To solve this problem, we will first use the molarity equation, which states that molarity (M) is equal to the moles of solute (n) divided by the volume of solution (V):
M = n/V
We can then rearrange the equation to calculate the number of moles of solute needed to prepare a given volume of solution with a given molarity:
n = M x V
Plugging in the values from the problem, we get:
n = 0.300 M x 2.50 L
This yields a result of 0.750 moles of C12H22O11 needed to prepare 2.50 L of a 0.300 M solution.
Alternatively, if we were given the moles of solute needed to prepare a given volume of solution with a given molarity, we could use the molarity equation to calculate the molarity of the solution. For example, if we were given that 0.430 moles of C12H22O11 are needed to prepare 2.50 L of a solution, then we could calculate the molarity of the solution as follows:
M = n/V
M = 0.430 moles / 2.50 L
This yields a result of 0.172 M.
Learn more about Molarity at : https://brainly.com/question/8732513
#SPJ4
Data Table 2: Sodium Hypochlorite SDS information Items SDS Information Physical State Liquid and no color Route of Exposure & Symptoms Protective Equipment First Aid Procedures w Fire-fighting Measures Eye contact, skin contact, inhalation and ingestion As in any fire, wear self- contined breathing Get medical help immediately some other To extinguish media use water spray dry uccompuse siowy at normal temperatures away from incompatible substances bleach is diluted by the running water. sewers or waterway Chemical Reactivity Safe Storage Safe Disposal Environmental/ Ecotoxicity Spill Cleanup Procedures Vermiculite. Also provide ventilation .
Correct match Sodium Hypochlorite with SDS information is:
Physical State: Liquid and colorless
Route of Exposure and Symptoms: Eye contact, skin contact, inhalation, and ingestion.
Fire-fighting Measures: To extinguish media use water spray dry.
Safe Storage: away from incompatible substances.
Environmental/ Ecotoxicity: sewers or waterway.
What is Sodium Hypochlorite?Sodium hypochlorite is an inorganic chemical compound with the formula NaOCl comprising a sodium cation (Na⁺) and a hypochlorite anion (OCl⁻ or ClO⁻).
It can also refer as the sodium salt of hypochlorous acid. The anhydrous compound is unstable and can decompose explosively. It is crystallized as a pentahydrate NaOCl·5H₂O, a greenish-yellow solid which is not explosive.
Sodium hypochlorite is often a pale greenish-yellow dilute solution as liquid bleach, which is a household chemical used as a disinfectant or a bleaching agent. In solution, this compound is unstable and easily decomposes, releasing chlorine, still the oldest chlorine-based bleach.
Sodium Hypochlorite has corrosive properties, and reaction products make it a significant safety risk.
Learn more about Sodium Hypochlorite, here:
https://brainly.com/question/10423391
#SPJ4
Which would always be true of an object possessing a kinetic energy of 0 joules?.
The statement that would always be true of an object possessing 0 joules of kinetic energy is: B. It is at rest.
What is kinetic energy?Kinetic energy is a form of energy an object has because of its motion. When an object is moving, they are doing work. Work transfers energy that makes the object speed up and gains kinetic energy. If an object has 0 joules of kinetic energy, it means there is no work and no movement happens to the object. Therefore, the object is at rest. Hence, the correct answer is B.
This question seems incomplete. The complete query is as follows:
“Which would ALWAYS be true of an object possessing a kinetic energy of 0 joules?
a. It is on the ground.b. It is at rest.c. It is moving on the ground.d. It is moving.e. It is above the ground.”Learn more about kinetic energy here https://brainly.com/question/25803184
#SPJ4
Draw a Lewis structure for NHF2 in which the central N atom obeys the octet rule, and answer the following questions based on your drawing.The number of unshared pairs (lone pairs) on the central N atom is:The central N atom forms ______ single bonds.The central N atom forms ______ double bonds.Draw a Lewis structure for CO2 in which the central C atom obeys the octet rule, and answer the following questions based on your drawing.The number of unshared pairs (lone pairs) on the central C atom is:The central C atom forms ____ single bonds.The central C atom forms ____ double bonds.
The formation of molecule can easily be shown by drawing Lewis dot structure. Since atom's Lewis dot structure has three dots. Therefore, the number of unshared electron on N is 2 and shared electrons is 6.
What is Lewis dot structure?Lewis dot structure is a way to represent the valence electron of an element in the form of dot. These are mainly beneficial in understanding the chemical formula of covalent compound.
In compound NHF[tex]_2[/tex], N belongs to group 15 with 5 electrons. 3 electrons will be used in making bond with one electron of F and one electron of H. Now 2 electrons are left on the N. So now N has 1 lone pair and 3 bond pair. The geometry will be tetrahedral and shape will be pyramidal.
Therefore, the number of unshared electron on N is 2 and shared electrons is 6.
To learn more about Lewis dot structure, here:
brainly.com/question/20300458
#SPJ1
Which gas can turn blue litmus paper to red?
A. Inert gases
B. Oxygen
C. Nitrogen
D. Carbon Dioxide
And why???
Which of the molecules regulate the enzyme that catalyzes malonyl‑coa synthesis?
a. fatty acids or fatty acyl-CoA
b. carnitine
c. oxaloacetate
d. acetyl-CoA
e. citrate
Acetyl-CoA, the molecules regulate the enzyme that catalyzes malonyl‑coa synthesis.
Acetyl-CoA carboxylases (ACCs) are the enzymes that catalyze acetyl-CoA carboxylation to create malonyl-CoA. ACC1 and ACC2 are two members of the ACC group in the mammals.
ACC1 is found in the cytosol and it is the first and most important enzyme in the de novo fatty acid production pathway.
ACC2 is found on the outer membrane of mitochondria and produces malonyl-CoA to regulate the activity of carnitine palmitoyltransferase 1 (CPT1), which is involved in the fatty acid -oxidation.
So, Malonyl-CoA is synthesized from the Acetyl-coA in presence of Acetyl-CoA carboxylases (ACCs).
To learn more about Malonyl‑coA synthesis, Here :
https://brainly.com/question/29656853?referrer=searchResults
#SPJ4
Is freezing point elevation or depression?
Freezing point depression is the reduction in the freezing point of a liquid caused by the addition of a non-volatile solute.
What is non-volatile solute?A non-volatile solute is a molecule or compound which does not easily vaporize at a given temperature and pressure. This type of solute does not evaporate into the air and instead remains in solution. Common examples of non-volatile solutes are salts, sugar, acids, bases, proteins, and other molecules. In comparison to volatile solutes, non-volatile solutes tend to remain in solution and are not readily removed by evaporation. This type of solute is also known as a “non-volatile ion”. Non-volatile solutes can be beneficial in certain applications, such as in food preservation, as they are able to provide flavor, color, and texture to food products. Non-volatile solutes can also be used in chemical engineering and pharmaceutical processes, as they can help control pH levels, improve solubility, and enhance stability of products.
When a non-volatile solute is added to a solvent, the vapor pressure of the solvent decreases, and the freezing point of the solvent is depressed. The freezing point is the temperature at which the liquid phase of a substance changes to the solid phase.
To learn more about non-volatile solute
https://brainly.com/question/26414694
#SPJ4
How do you test if something is an ionic compound?
Answer:
The most simple way to identify an ionic compound is to check if the chemical compound is made of just two elements wherein one element can be a metal (belonging to any groups 1, 2 or 3) and the second element is a non-metal, (from group 5, 6 or 7).
Explanation:
How many atoms are in 1.00 moles o2?
One mole of oxygen gas, which has the formula O2, has a mass of 32 g and contains [tex]6.02*10^{23}[/tex] molecules of oxygen but [tex]12.04*10^{23}[/tex] atoms, because each molecule of oxygen contains two oxygen atoms.
The molecular weight of a substance is equal to its mass in one mole. Water, for example, has a mean molecular weight of 18.015 atomic mass units (amu), implying that one mole of water weighs 18.015 grams. In the International System of Units, the mole (symbol mol) is the unit of substance amount (SI). The amount of substance is a measurement of how many elementary entities of a given substance are present in an object or sample. An elementary entity can be an atom, a molecule, an ion, an ion pair, or a subatomic particle such as an electron, depending on the substance.
The mole is widely used in chemistry to express quantities of reactants and products of chemical reactions. The term gram-molecule was formerly used for "mole of molecules", and gram-atom for "mole of atoms".
To learn more about moles of substances, here
https://brainly.com/question/19711232
#SPJ4
Nobelium 259 has a half life of 60 minutes. How much remains of a 3,000kg sample after 12 hours?
The 3000 Kg of the nobelium sample with a half life of 60 minutes decays to 1.0 1 Kg after 12 hours.
What is half life?Half life of a radioactive isotope is the time taken to decay half of its initial amount. The half life is related with the decay constant k by the expression:
k = 0.693/t1/2.
Given the t1/2 of the nobelium sample is 60 minutes.
Thus k = 0.693/60 min = 0.011 min⁻¹
time take for the decay = 12 hrs = 720 minutes.
initial amount = 3000 Kg.
Thus, k= 1/t ln (N0/Nt)
0.011 min⁻¹ = 1/720 min ln (3000/Nt)
Nt = 1.01 Kg.
Therefore, 1.01 Kg of nobelium sample will remain after 12 hours.
To find more on half life, refer here:
https://brainly.com/question/24710827
#SPJ1
Why is it always cooler by the water on a hot sunny day
Answer:
Explanation:
Well put simply, all our beautiful lakes this time of year are cold after a long winter. If you are enjoying a nice sunny, warm calm day, then the temperature drops 20 degrees as a breeze swings in from the lake, we call that a lake breeze. You can blame the specific heat as to why that occurs. Specific heat is defined by the amount of energy required to raise a unit of mass of a substance by a degree. For our purposes it is how much heat energy it takes to raise the same amount of water as it does land.
What is the purpose of the proton H+) concentration gradient created across the mitochondrial membrane?
The electrochemical proton gradient across the inner mitochondrial membrane is basically used to drive ATP synthesis during the critical process of oxidative phosphorylation.
In a mitochondrial membrane, a proton gradient is formed when the proton concentration outside the membrane is greater than the inner membrane which is inside the membrane. The gradient develops as a result of the respiration's electron transport chain.
The electrochemical proton gradient drives ATP synthesis via the enzyme ATP synthase. ADP and Pi are combined to generate an ATP molecule because protons pass via the enzyme ATP synthase. Protons flow down towards their concentration gradient into the matrix via membrane protein ATP synthase which causes it to spin (like a water wheel) and catalyze conversion of ADP to ATP.
Learn more about proton gradient from the link given below.
https://brainly.com/question/29834941
#SPJ4
It takes 547 kJ to remove one mole of electrons from the atoms at the surface of a solid metal.
What is the maximum wavelength of light capable of doing this?
According to the relation of variables in the electromagnetic spectrum the maximum wavelength of light is 36.3 ×10[tex]^-[/tex]³¹ m.
What is electromagnetic spectrum ?The electromagnetic spectrum consists of electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In the given problem,energy is related to wavelength by the formula, λ=hc/E,λ=6.626×10[tex]^-34[/tex]×3×10⁸/547×1000=36.3×10[tex]^-31[/tex] m.
Thus, the maximum wavelength of light is 36.3×10[tex]^-31[/tex] m.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/23727978
#SPJ1
Why is freezing point depression of 0.1 m sodium chloride solution is nearly twice that of 0.1 m glucose solution?
The freezing point depression of a 0.1 m sodium chloride solution is nearly twice that of a 0.1 m glucose solution because sodium chloride is a stronger electrolyte than glucose.
What is glucose solution?Glucose solution is a liquid form of glucose, a simple sugar found naturally in fruits, vegetables and other foods. Glucose is an important source of energy for the human body, and it is a necessary component of many biochemical reactions. Glucose solutions are used in a variety of medical and scientific settings, such as to provide nutrition to hospitalized patients, to feed cells in tissue cultures, and to calibrate medical lab equipment. Glucose solutions are often prepared in a laboratory by dissolving a known amount of glucose powder in distilled water. The concentration of glucose in the solution is usually expressed as the percentage of glucose by weight. Solutions with a higher concentration of glucose are referred to as hypertonic, while those with a lower concentration are referred to as hypotonic.
When a solution contains an electrolyte, the ions it produces interact with the water molecules and reduce their ability to form hydrogen bonds. This reduces the amount of energy needed to freeze the solution and therefore decreases the freezing point. Since sodium chloride produces more ions than glucose, the freezing point depression of the sodium chloride solution is greater.
To learn more about glucose solution
https://brainly.com/question/19863770
#SPJ4
Part A Spell out the full name of the compound. Submit Request Answer Part B Spell out the full name of the compound. Submit Request Answer Part C Br Spell out the full name of the compound. Submit Request Answer Part D Spell out the full name of the compound. Submit Request Answer Part E Spell out the full name of the compound. Submit Request Answer Part F Spell out the full name of the compound. Submit Request Answer
The name of the compound comprises of both the cation and anion part with most of the time the anionic part ending with suffix-ide.
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:
1)Molecular compounds where in atoms are joined by covalent bonds.
2) ionic compounds where atoms are joined by ionic bond.
3)Inter-metallic compounds where atoms are held by metallic bonds
4) co-ordination complexes where atoms are held by co-ordinate bonds.
They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compound,here:
https://brainly.com/question/13516179
#SPJ4
How many grams of sucrose should be dissolved in 100g water in order to produce a solution?
To determine the amount of sucrose that should be dissolved in 100g water to produce a solution, you must refer to the solubility of sucrose.
What is solution?Solution is an answer or a set of answers to a problem or question. It is typically a result of problem-solving that can be logical, practical, or creative. Solutions are often developed through discussion, brainstorming, and collaboration in order to develop the best possible outcomes. Solutions are often unique, and the process of finding them can be complex.
The solubility of sucrose at room temperature is approximately 186 grams of sucrose per 100g of water. Therefore, to produce a solution, 186g of sucrose should be dissolved in 100g of water.
To know more about solution click-
https://brainly.com/question/25326161
#SPJ4
What is the atmospheric pressure if the partial pressures of nitrogen, oxygen, and argon are 77.75 kPa,
19.94 kPa, and 1.999 kPa, respectively?
Answer:
The answer is P(AR) 27Kpa
Why are chemical symbols used in chemistry?
Chemical symbols are used to quickly identify the elements and atoms in a chemical formula and to standardize the "language of science."
What are the benefits of chemical symbols in chemistry?Chemical symbols are useful for describing chemical elements since they save time by allowing you to record chemical formulas without having to type out each element's full name. Numerous molecules, especially organic ones, include atoms from a wide range of various elements.
What purpose does symbol use serve?Symbols, such as gestures, signs, objects, messages, and words, help people to grasp that world. They offer widely accepted meanings that act as guides for comprehending experiences and are shared by groups.
To know more about Chemical symbols visit:-
https://brainly.com/question/9249660
#SPJ4
What is a Lewis valence E dot structure?
Lewis valence electron dot structure is a representationof the valence electrons of an atom. It uses dots around the symbol of tye element.
In the Lewis dot structure the dots are arranged to the right and left and above and below the symbol with no more than two dots on a side. It does not matter what order the positions are used. It is used to show how the electrons are arranged around individual atoms in a molecule. It is used to find the electronic configuration of the element. To draw the Lewis structure we need to know the total number of valence electrons present. The number of valence electrons in an individual atom can be found based on the atom’s group number in the periodic table. Then we need to determine the central atom.
To learn more about Lewis dot structure please visit:
https://brainly.com/question/20300458
#SPJ4
What element is located on the left side of the table?
Answer:
Metals
Explanation:
right answer
How do you identify sp3 and sp2?
A general definition of an sp3 hybridised atom is one with only single bonds. The alkanes are the greatest example. An alkane has sp3 hybridised carbon atoms with tetrahedral shape throughout. Alkenes and other atoms with double bonds frequently have sp2 hybridised carbon atoms with trigonal planar shape.
What is Hybridization ?The process of hybridization is the mixing of atomic orbitals with the same energy levels to create an equal number of new hybrid orbitals. This mixing typically produces hybrid orbitals with completely distinct energies, geometries, etc.
When two atomic orbitals in a molecule combine to generate a hybrid orbital, the energy of the orbitals of the individual atoms is redistributed to give orbitals of equivalent energy. Hybridization is the name of this procedure.
Learn more about Hybridization here:
https://brainly.com/question/22765530
#SPJ4
How do you calculate RMS current?
To calculate the RMS current, Divide the RMS voltage by the impedance.
What is RMS value?
In science and its applications, the root mean square of a bunch of numbers is characterized as the square foundation of the mean square (math mean of squares) of that set. RMS, likewise called root mean square, is a unique instance of summed up mean. The RMS worth of a constantly shifting capability can be characterized as the fundamental of the square of the momentary worth north of one cycle.
For AC current, RMS rises to the worth of steady DC current that delivers a similar power utilization with a resistive burden. In assessment hypothesis, the root mean square mistake of an assessor is a proportion of the blemish of the assessor's fit to the information.
Therefore, To calculate the RMS current, Divide the RMS voltage by the impedance.
To know more about RMS value, visit:
brainly.com/question/9623597
#SPJ4
When a sample of 25.0 g of water is cooled from 20.0 C to 10.0 C What is the number of joules of energy released?
1046 J worth of heat energy is emitted.
We must calculate the heat energy emitted from the question using the specific heat formula, Q = mcT.
Q is the heat energy, and m is the mass.
The specific heat is c.
T stands for temperature change.
The answer is m = 25.0 grams.
ΔT = (20.0 - 10.0) (20.0 - 10.0) °C = 10.0 °C
c = 4.184 J/g °C (Specific heat capacity of water) (Specific heat capacity of water)
When the parameters are entered into the formula Q = mcT, we get Q = 25.0 4.184 10.0.
Q = 1046 J
Consequently, 1046 J worth of heat energy was discharged.
To know more about Joules energy visit:
brainly.com/question/20726142
#SPJ4
For 2 hours, Leah was driving east at one-half of her car's top speed. Her car can go at a maximum speed of 180 kilometers per hour. In this time, how far did Leah drive?
Answer:
180 kilometers in 2 hours.
Explanation:
To find the distance Leah drove, we need to first determine her average speed. Since Leah was driving east at one-half of her car's top speed, her average speed was 180/2 = 90 kilometers per hour.
Next, we can use this speed to determine the distance she traveled. Since Leah was driving for 2 hours at an average speed of 90 kilometers per hour, she traveled 2 * 90 = 180 kilometers.
Therefore, Leah drove 180 kilometers in 2 hours while driving east at one-half of her car's top speed.
FILL IN THE BLANK. smoking and the episodes of lung cancer have a high correlation, but it does not prove ________.
Smoking and the episodes of lung cancer have a high correlation, but it does not prove causation.
Cigarette smoking is the leading cause of lung cancer. Cigarette smoking is responsible for 80% to 90% of lung cancer deaths in the USA. Other tobacco products, including such cigars or pipes, also increase the risk of developing lung cancer. Tobacco smoke consists of a toxic cocktail of over 7,000 chemicals.
Several studies have looked into the effects of continuing to smoke after a lung cancer diagnosis and discovered that it slows healing, lessens the efficacy of cancer treatments, lowers overall quality of life, increases the risk of relapse and a second primary cancer, and reduces survival. Individuals who smoke cigarettes seem to be 15 to thirty times more likely than nonsmokers to develop or end up dying from lung cancer.
To know more about the Lung Cancer, here
https://brainly.com/question/13680458
#SPJ4
4A1+30₂ → 2Al₂O3
6.0 mol Al can form 3.0 mol Al2O3.
4.0 mol O2 can form 2.7 mol Al2O3.
Which reactant is limiting (forms less
product)?
2) 0₂
1) Al
4A1+30₂ → 2Al₂O3,6.0 mol Al can form 3.0 mol Al2O3 and 4.0 mol O2 can form 2.7 mol Al2O3. Oxygen reactant is limiting. Therefore, option 2 is correct.
What is limiting reactant ?The limiting reagent is a substance that prevents a chemical reaction from occurring completely. When a limiting reagent is used in a chemical reaction, the atoms, molecules, or ions of the other reactant that it (the limiting reagent) reacts with will either stay free or unreacted.
As you can see, O2 creates less of the final good. Therefore, the limiting reactant is O2. Keep in mind that the limiting reactant is the one that depletes before the other reactant(s) are fully reacted. As a result, 2.7 moles of Al2O3 were actually created.
Thus, option 2 is correct.
To learn more about limiting reactant, follow the link;
https://brainly.com/question/14225536
#SPJ1
2CrO4 + 2H3O -> Cr2O7 + 3H2O
(yellow) (orange)
Unknown solution added until the sample turns yellow
which of these is he added solution?
CH3COOH
KNO3
NH4NO3
NaOH
The unknown solution added to the sample which turn the sample yellow is potassium nitrate.
What is potassium chromate?Potassium chromate is an ionic compound formed by the lose of electrons from potassium to chromate group. Chromium can exists in both +3, +4 and +7.
When chromate changes to dichromate in an alkaline medium, the color changes from orange to yellow. The addition of potassium nitrate to the aqueous chromate solution leads to the formation of potassium dichromate.
Potassium dichromate is orange in color. When it releases the dichromate ions to the solution it turns the color to yellow.Hence, option b is correct.
To find more on potassium dichromate, refer here:
https://brainly.com/question/14558965
#SPJ1
How do you respond to a chemical exposure to the eye?
Do these things right away when a chemical splashes on your eye.Use water to irrigate your eye.For the at least 20 minutes, use pristine, lukewarm tap water.Use soap and water to wash your hands.To ensure that no chemicals or soap are still on your hands, thoroughly rinse them.Remove your contacts.
How might chemical spills be avoided?Safety Glasses, goggles, and shields — These products shield the face and eyes from chemical spills.Additionally, they protect them against gases, vapors, and dust.Skin Protection - Clothing items like gloves, boots, & coveralls should be used in order to protect the skin.
A chemical splash accident is what kind of mishap?Chemical splashes are incidents where dangerous substances unintentionally spill, project, aerosolize, or otherwise disseminate inside a laboratory setting.
To know more about chemical exposure visit:
https://brainly.com/question/29629890
#SPJ4