which method is adopted in the seperation of lead chloride from water​

Answer: Atomic mass (Cu) = (x)(63.0 amu) + (1 – x)(65.0 amu) = 63.5 amu 63.0x + 65 – 65.0x = 63.5 –2x = –1.5 x = 0.75 The percent abundance of each isotope is 75.0 % (Cu-63) and 25.0 % (Cu-65).

Explanation: As you know, the average atomic mass of an element is determined by taking the weighted average of the atomic masses of its naturally occurring isotopes.

Simply put, an element's naturally occurring isotopes will contribute to the average atomic mass of the element proportionally to their abundance.

Answer:

[tex]T_2=637\°C[/tex]

Explanation:

Hello there!

In this case, considering this problem as pressure constant, since the change is exhibited in temperature and volume only, it is possible for us to use the Charles' law as shown below:

[tex]\frac{V_2}{T_2}=\frac{V_1}{T_1}[/tex]

Thus, by solving for the final temperature, we obtain:

[tex]T_2=\frac{T_1V_2}{V_1}\\\\T_2=\frac{273K*1L}{0.30L}\\\\T_2=910K-273\\\\T_2=637\°C[/tex]

Best regards!

Answer:

1.51448 atms

Explanation:

The compound n - hexane as shown does not dissolve in water.

Due to a large difference in polarity between the two compounds, n-Hexane does not dissolve in water.

Water is a polar molecule, which means that one end of it (the hydrogen side) has a slight positive charge and the other end (the oxygen side) has a slight negative charge. The unequal distribution of electrons within the water molecule, which produces a dipole moment, is the cause of this polarity.

N-Hexane, on the other hand, is a nonpolar molecule. The electrons are uniformly distributed throughout the molecule, which is made up of carbon and hydrogen atoms bound together in a straight chain. N-Hexane lacks a substantial dipole moment as a result.

Learn more abaout hexane:https://brainly.com/question/30364285

#SPJ1

Answer:

A. Number of energy levels

Answer:

II. 0.10 M HF + 0.10 M NaF.

Explanation:

A buffer system may be formed in one of two ways:

Which of the following mixtures could be considered a buffer?

I. 0.10 M HCl + 0.10 M NaCl. No, because HCl is a strong acid.

II. 0.10 M HF + 0.10 M NaF. Yes, since HF is a weak acid and F⁻ (coming from NaF)  is its conjugate base.

III. 0.10 M HBr + 0.10 M NaBr. No, because HBr is a strong acid.

The atomic mass of element A, given that the first isotope has abundance of 18.18% and a mass of 147.99, is 131.43 amu

From the question given above, the following data were obtained:

The atomic mass of the element A can be obtain as illustrated below:

Atomic mass = [(Mass of 1st × 1st%) / 100] + [(Mass of 2nd × 2nd%) / 100]

Inputting the given parameters, we have:

Atomic mass = [(147.99 × 18.18) / 100] + [(127.76 × 81.82) / 100]

Atomic mass = 26.90 + 104.53

Atomic mass = 131.43 amu

Thus, the atomic mass of element A obtained from the above calaculation is 131.43 amu

Learn more about average atomic mass:

https://brainly.com/question/24185848

#SPJ1

The atomic mass of element A is 198.39 (to two decimal places).

To calculate the atomic mass of element A, we need to consider the relative abundance of each isotope and its corresponding mass. The atomic mass is the weighted average of the masses of all the isotopes, taking into account their relative abundance.

Given:

Isotope 1: Relative abundance = 19.52%, Mass = 265.1

Isotope 2: Relative abundance = 100% - 19.52% = 80.48%, Mass = 182.27

To calculate the atomic mass, we multiply the relative abundance of each isotope by its mass and sum up the results.

Atomic mass = (Relative abundance of Isotope 1 * Mass of Isotope 1) + (Relative abundance of Isotope 2 * Mass of Isotope 2)

Atomic mass = (19.52/100 * 265.1) + (80.48/100 * 182.27)

Calculating the values:

Atomic mass = (0.1952 * 265.1) + (0.8048 * 182.27)

Atomic mass = 51.72752 + 146.661296

Atomic mass = 198.388816

Rounding to two decimal places, the atomic mass of element A is 198.39.

For more such question on mass. visit :

https://brainly.com/question/24191825

#SPJ8

Answer:

Reducing the amount of water you use, by having a 5-minute shower or not running the water when washing up the dishes, can help protect vital wetlands. Plant scientists are also working to help conserve by developing crop varieties that use less water.

Explanation:

Answer:

1. Most of the endangered organisms may represent a source of income.

2. The conservation or preservation may conflict with morals.

3. The role of the species or organisms might not be understood.

Explanation:

Biodiversity simply means the amount or number of living organisms that exist in the world.

The practice of protecting these existing living organisms for specific known purposes is regarded as the preservation or conservation of biodiversity.

This process or practice of preserving biodiversity is important to meet most of the human needs, such as generating income, source of food and fuel among others.

There are 3.4 milliliters of the active ingredient in the cough syrup bottle.

To calculate the volume of the active ingredient in the cough syrup bottle, we need to multiply the total volume of the bottle by the percentage of the active ingredient.

Given:

Total volume of the bottle = 68.0 mL

Percentage of active ingredient = 5.00%

First, we convert the percentage to a decimal by dividing it by 100:

Percentage of active ingredient = 5.00% = 5.00/100 = 0.05

Next, we calculate the volume of the active ingredient:Volume of active ingredient = Total volume of the bottle × Percentage of active ingredient

Volume of active ingredient = 68.0 mL × 0.05

Volume of active ingredient = 3.4 mL

Therefore, there are 3.4 milliliters of the active ingredient in the cough syrup bottle.

It's important to note that the calculation assumes a homogeneous distribution of the active ingredient throughout the solution.

For more such questions on  cough syrup visit:

https://brainly.com/question/2970281

#SPJ8

If anyone still needed help on this, someone wrote out the student table on brainly.com, look up Lab: Calorimetry and Specific Heat.

The page should say something along the lines of please Please i need it Lab: Calorimetry and Specific Heat

This one should help you a lot more. Good luck.

Answer:

If anyone still needed help on this, someone wrote out the student table on brainly.com, look up Lab: Calorimetry and Specific Heat.

The page should say something along the lines of please Please i need it Lab: Calorimetry and Specific Heat

This one should help you a lot more. Good luck.

Explanation:

Answer:

Yes

Explanation:

There are in double dash :) ( = )

Answer:

yes

Explanation:

Because the double dash shows a double bond it simply means that two electrons from each atom are being shared

Answer:

2.04x10⁻⁴ mol

Explanation:

First we convert 3.06x10⁻³ grams of glycine into moles of glycine, using its molar mass:

In order to calculate the number of hydrogen moles, we multiply the number of glycine moles by 5, as there are 5 hydrogen moles per glycine mol:

The escape of the carbon dioxide molecules from the surface. Option 4.

The area where the soda and surrounding air come into contact when the soda bottle is opened rises. The exchange of gases between the soda and the atmosphere is facilitated by the increased surface area.

The molecules of carbon dioxide have a tendency to leave the liquid phase and transition into the gas phase as they come into contact with the air. The action in question is called degassing. The soda's concentration of dissolved carbon dioxide is decreased and its capacity to dissolve further due to the ongoing emission of carbon dioxide.

Learn more about soda:https://brainly.com/question/31889777

#SPJ1

The reason is not an explanation of the assertion as we can see, the concepts are not related.

The process by which a substance transforms from a gaseous state to a liquid state is known as condensation. When a gas's temperature is dropped, the gas molecules experience energy loss and coalesce to create a liquid.

The kinetic energy of gas molecules is transformed into potential energy during condensation when they slow down and move closer to one another. The molecules can then change from a gaseous state to a liquid state since they can no longer maintain their gaseous state

Hence, the reason is not an explanation of the assertion

Learn more about condensation:https://brainly.com/question/1287204

#SPJ1

1. C6H10O5 + 6O2 → 6CO2 + 5H2O

2. MgO + H2O → Mg(OH)2

3. 151.2444 grams of carbon dioxide are required to produce 3.44 moles of carbonic acid in the blood.

1. The complete, balanced chemical reaction for the burning of cellulose (C6H10O5), or wood, is:

C6H10O5 + 6O2 → 6CO2 + 5H2O

This reaction represents the combustion of cellulose in the presence of oxygen, resulting in the formation of carbon dioxide (CO2) and water (H2O).

2. The balanced equation for the reaction between magnesium oxide (MgO) and water (H2O) to produce magnesium hydroxide (Mg(OH)2) is:

MgO + H2O → Mg(OH)2

According to the equation, 1 mole of magnesium oxide reacts with 1 mole of water to produce 1 mole of magnesium hydroxide. Therefore, if 2.55 moles of magnesium oxide react, the same number of moles of magnesium hydroxide will be produced.

3. The balanced equation for the reaction between carbon dioxide (CO2) and water (H2O) to form carbonic acid (H2CO3) is:

CO2 + H2O → H2CO3

According to the equation, 1 mole of carbon dioxide reacts with 1 mole of water to produce 1 mole of carbonic acid. Therefore, if 3.44 moles of carbonic acid are produced, the same number of moles of carbon dioxide is required.

To calculate the mass of carbon dioxide, we need to know its molar mass, which is approximately 44.01 g/mol. Therefore, the mass of carbon dioxide required to produce 3.44 moles of carbonic acid is:

Mass = Moles × Molar mass

Mass = 3.44 moles × 44.01 g/mol

Mass = 151.2444 g

Therefore, 151.2444 grams of carbon dioxide are required to produce 3.44 moles of carbonic acid in the blood.

For more such qeustions on carbon dioxide visit:

https://brainly.com/question/21256960

#SPJ8

Answer:

The answer is A ahahahha

Explanation:

Because it just is

Answer:

Answer: The two types of fibres obtained from the fleece of a sheep are beard hair, which are coarse and fine, and soft under hair, which grow near the skin. The under hair are used to make wool.

Explanation:

mark brainly please!

(I didn't copy the person above me! I just realized we had the same answer.)

The kinetic energy of a 23.2-g object moving at a speed of 98.7 m/s is  113.30 J. Option D

The kinetic energy of an object can be calculated using the formula: KE = (1/2)mv^2, where KE is the kinetic energy, m is the mass of the object, and v is the velocity or speed of the object.

Given:

Mass (m) = 23.2 g = 0.0232 kg

Speed (v) = 98.7 m/s

Substituting these values into the formula, we can calculate the kinetic energy:

KE = (1/2)(0.0232 kg)(98.7 m/s)^2

KE = (1/2)(0.0232 kg)(9756.09 m^2/s^2)

KE ≈ 113.30 J

Therefore, the kinetic energy of a 23.2-g object moving at a speed of 98.7 m/s is approximately 113.30 J.

It's worth noting that the question is repeated twice, but the answer remains the same. The kinetic energy of the object is determined by its mass and speed, and both calculations yield the same result. Option D

For more sucu questions on kinetic energy visit:

https://brainly.com/question/25959744

#SPJ8

Answer:

1. 1.25 mol ants x 6.02*10^23 ants/1 mol ants = 7.53*10^23 ants

2. 4.92*10^26 pencils x 1 mol pencils/6.02*10^23 pencils = 817 mol pencils

3. 0.26 mol molecules x 6.02*10^23 molecules/1 mol molecules = 1.6*10^23 molecules

4. 3.46*10^19 molecules x 1 mol molecules/6.02*10^23 molecules = 5.75*10^-5 mol molecules

5. 5.3*10^20 atoms x 1 mol atoms/6.02*10^23 atoms = 8.8 mol atoms

6. 0.11 mol atoms x 6.02*10^23 atoms/1 mol atoms = 6.6*10^22 atoms

I would suggest looking into "dimensional analysis" for help with this type of material. Dimensional analysis will stick with you all throughout chemistry, so picking it up will be extremely beneficial.

The arbitrary assignment of the reduction of Zn2+(aq) to Zn(s) as E = 0 V serves as a reference point for determining the relative reduction potentials of other redox reactions. This assignment is based on the convention that the standard reduction potential

In the case of the Zn2+(aq) to Zn(s) reduction, the reaction involves the gain of two electrons by Zn2+ ions, leading to the formation of solid zinc metal. The assigned reduction potential of 0 V indicates that, under standard conditions (1 M concentration, 25°C, and 1 atm pressure), the Zn2+ ions have a tendency to accept electrons and be reduced to Zn metal.

Any reduction potential above 0 V suggests a greater tendency for reduction, while a negative reduction potential indicates a lower tendency for reduction compared to the Zn2+(aq) to Zn(s) reaction.

This reference potential allows us to compare the reactivity of other redox systems and predict the feasibility of different reactions. The more positive the reduction potential, the greater the tendency for reduction to occur. Therefore, if we encounter a reduction potential of +0.34 V for another reaction, we can infer that it is more likely to occur spontaneously compared to the Zn2+(aq) to Zn(s) reduction. Conversely, if we encounter a reduction potential of -0.50 V, we can conclude that the reverse reaction (oxidation) is more favorable than the reduction of Zn2+(aq) to Zn(s).

Overall, the assignment of E = 0 V for the reduction of Zn2+(aq) to Zn(s) provides a benchmark for understanding the electrochemical behavior of other redox reactions and allows us to make predictions based on the relative reduction potentials.

For more such questions on reduction

https://brainly.com/question/21851295

#SPJ8

Answer:

substances is never entirely a one way

Explanation:

no possibility of obtaining complete combustion at hig

temperature.

always loss of heat from the temperature

its temperature is lower than the constant volume process because some of the energy is utilized to change the volume of the system

Four reasons why the temperature of flame is lower than adiabatic flame temperature is that there is  no possibility of obtaining complete combustion at high temperature due to high thermal energy.There is always loss of heat from temperature,its temperature is lower than constant volume process because some of  energy is utilized to change the volume of the system.

Thermal energy is defined as a type of energy which is contained within a system which is responsible for temperature rise.Heat is a type of thermal energy.It is concerned with the first law of thermodynamics.

Thermal energy arises from friction and drag.It includes the internal energy or enthalpy of a body of matter and radiation.It is related to internal energy and heat .It arises when a substance whose molecules or atoms are vibrating faster.

These vibrating molecules and atoms collide and as a result of which heat is generated in a substance , more the collision of particles , higher is the thermal energy.

Learn more about thermal energy,here:

https://brainly.com/question/18989562

#SPJ2

Answer: n= 4, , l= 3, [tex]m_l[/tex] = 1,  permissible

Explanation:

Principle Quantum Numbers : It describes the size of the orbital and the energy level. It is represented by n. Where, n = 1,2,3,4....

Azimuthal Quantum Number : It describes the shape of the orbital. It is represented as 'l'. The value of l ranges from 0 to (n-1).For l = 0,1,2,3... the orbitals are s, p, d, f...

Magnetic Quantum Number : It describes the orientation of the orbitals. It is represented as [tex]m_l[/tex]. The value of this quantum number ranges from [tex](-l\text{ to }+l).[/tex]

Spin Quantum number : It describes the direction of electron spin. This is represented as [tex]m_s[/tex]. The value of this is [tex]+\frac{1}{2}[/tex] for upward spin and [tex]-\frac{1}{2}[/tex] for downward spin.

a) n=1 , l= 2, [tex]m_l[/tex] = 0,  not permissible as l can not greater than n.

b) n= 4, , l= 3, [tex]m_l[/tex] = 1,  permissible

c) n= 3, l= 3, [tex]m_l[/tex] = 1, not permissible as l can not equal than n.

d) n= 4 , l= 3, [tex]m_l[/tex] = 4,  not permissible as [tex]m_l[/tex] can not greater than l.

Answer: True

Explanation: For example, changing direction can change velocity

Answer:

D

Explanation:

Hope that helps :)

The volume of hydrogen gas at STP is 670.7 mL.

The given information is,Volume of hydrogen gas = 795.0 mLTemperature (T) = 23 oCPressure (P) = 1055 torrWe are required to find the volume of hydrogen gas at STP.STP stands for Standard Temperature and Pressure. It is used as a standard for measurement of gas volume and pressure. The standard temperature is 0 oC or 273.15 K and the standard pressure is 1 atm or 760 mmHg or 101.325 kPa.1 atm = 760 mmHg = 101.325 kPaSTP Conditions:T = 273.15 KP = 1 atmFrom the ideal gas law, we havePV = nRTWhere, P is pressureV is volumeT is temperature n is the number of moles of gasR is the gas constantFor the comparison of volumes, we must have the same value of n and R on both sides of the equation.So, we can write the above equation asP₁V₁/T₁ = nR/P₂V₂/T₂Where,P₁, V₁ and T₁ are the initial valuesP₂, V₂ and T₂ are the final valuesFor the given data, we can write1055 torr x 795.0 mL / (273.15+23) K = nR/1 atm x V₂/273.15 KThe initial pressure and volume do not match the standard conditions. We have to convert the given pressure and volume to the standard conditions.Using the ideal gas law, we can writePV = nRTWe can rewrite this equation asP₁V₁/T₁ = P₂V₂/T₂Where,P₁, V₁ and T₁ are the initial valuesP₂, V₂ and T₂ are the final valuesFor the given data, we can write1055 torr x 795.0 mL / (273.15+23) K = P₂ x V₂ / (273.15 K)Rearranging this equation, we getP₂V₂ = 1 atm x 795.0 mL / (273.15 K) x 1055 torrP₂V₂ = 768.47 mLWe can now use the final pressure and volume to calculate the volume at STP.P₁V₁/T₁ = P₂V₂/T₂V₂ = P₁V₁T₂ / T₁P₁ = 1 atmV₁ = 768.47 mLT₁ = 23 oC + 273.15 = 296.15 KV₂ = 1 atm x 768.47 mL / 1055 torr x 296.15 K / 273.15 KV₂ = 670.7 mL

For more questions on volume

https://brainly.com/question/27100414

#SPJ8

1. For the pair of half-reactions:

Pt2+(aq) + 2e- → Pt(s)    ... (1)

Sn2+(aq) + 2e- → Sn(s)    ... (2)

To obtain the balanced equation for the overall cell reaction, we need to multiply the half-reactions by appropriate coefficients to ensure that the number of electrons transferred is equal. In this case, we can multiply equation (1) by 2 and equation (2) by 1:

2(Pt2+(aq) + 2e-) → 2(Pt(s))

Sn2+(aq) + 2e- → Sn(s)

Combining the equations, we have:

2Pt2+(aq) + Sn2+(aq) → 2Pt(s) + Sn(s)

The cell notation for this reaction is:

Pt2+(aq) | Pt(s) || Sn2+(aq) | Sn(s)

To calculate the standard cell potential (E°), we need to know the standard reduction potentials for Pt2+/Pt(s) and Sn2+/Sn(s) half-reactions. Referring to standard reduction potential tables, we find:

E°(Pt2+/Pt(s)) = +1.20 V

E°(Sn2+/Sn(s)) = -0.14 V

The overall cell potential (E°cell) is the difference between the reduction potentials:

E°cell = E°(cathode) - E°(anode) = 0.00 V - (-0.14 V) = +0.14 V

Therefore, the standard cell potential for this reaction is +0.14 V.

2. For the pair of half-reactions:

Co2+(aq) + 2e- → Co(s)    ... (3)

Cr3+(aq) + 3e- → Cr(s)    ... (4)

To balance the number of electrons transferred, equation (4) can be multiplied by 2:

2(Co2+(aq) + 2e-) → 2(Co(s))

Cr3+(aq) + 3e- → Cr(s)

Combining the equations, we have:

2Co2+(aq) + Cr3+(aq) → 2Co(s) + Cr(s)

The cell notation for this reaction is:

Co2+(aq) | Co(s) || Cr3+(aq) | Cr(s)

To calculate the standard cell potential (E°), we refer to the standard reduction potentials:

E°(Co2+/Co(s)) = -0.28 V

E°(Cr3+/Cr(s)) = -0.74 V

The overall cell potential (E°cell) is the difference between the reduction potentials:

E°cell = E°(cathode) - E°(anode) = -0.74 V - (-0.28 V) = -0.46 V

Therefore, the standard cell potential for this reaction is -0.46 V.

3. For the pair of half-reactions:

Hg2+(aq) + 2e- → Hg (l)    ... (5)

Cr2+(aq) + 2e- → Cr(s)    ... (6)

The equation for the overall cell reaction can be obtained by multiplying equation (6) by 2:

2(Hg2+(aq) + 2e-) → 2(Hg (l))

Cr2+(aq) + 2e- → Cr(s)

Combining the equations, we have:

2Hg2+(aq) + Cr2+(aq) → 2Hg (l) + Cr(s)

For more such questions on balanced equation.

https://brainly.com/question/11904811

#SPJ8

Answer: O D. A digital signal moves between a discrete number of values.

Explanation:

The digital signals are considered more reliable over the analog signals as they encode the information in a coded form. The bits or samples of the data are transmitted and converted into digital and numerical value. The stream of encoded data is in the form of continuous data at regular time intervals. It provides information in waveform and the data is in compact form. The data is in the form of binary bits 0 and 1 so greater the number of bits greater will be the greater will be the resolution of the information.

If you have 2.60 x 10²³ molecules of (NH₄)₃PO₄, you have 64.7 grams of it.

The number of particles contained in a sample is measured in terms of the mole. One mole of a compound is the quantity of that substance that has a mass in grams equal to its relative atomic or molecular mass (atomic weight).To find the number of moles of (NH₄)₃PO₄, we'll need to use the Avogadro constant, which is 6.02 x 10²³. We can use the formula:moles = particles ÷ Avogadro constantThe number of particles is given as 2.60 x 10²³. Substituting the values:moles = 2.60 x 10²³ ÷ 6.02 x 10²³moles = 0.432Molar massNow that we have the number of moles of (NH₄)₃PO₄, we can compute its mass. The molecular mass of (NH₄)₃PO₄ is 149.0 g/mol. We can use the formula:mass = moles x molecular mass Substituting the values:mass = 0.432 x 149.0mass = 64.7 grams

For more such questions on molecules

https://brainly.com/question/475709

#SPJ8