Answer:
1. CH3Br + NaOH --------> H3C---OH + Na---Br
Explanation:
Question 7 point
What is the name of the covalent compound with the formula P2N3?
Silicon is a key component of electronic devices. This element is a(n)__, a type of element also called a(n)__.
Answer:
Metalloid ; semiconductor
Explanation:
Calculate the amount of copper in moles in a 27.5g pure copper sheet
The amount of copper in moles in the 27.5 g pure copper sheet is approximately 0.433 moles.
To calculate the amount of copper in moles in a pure copper sheet, we need to use the molar mass of copper and the given mass of the sheet.
The molar mass of copper (Cu) is approximately 63.55 g/mol. This value represents the mass of one mole of copper atoms.
Given that the mass of the pure copper sheet is 27.5 g, we can calculate the number of moles using the following formula:
moles = mass / molar mass
Substituting the values:
moles = 27.5 g / 63.55 g/mol
moles ≈ 0.433 mol
Therefore, the amount of copper in moles in the 27.5 g pure copper sheet is approximately 0.433 moles.
To arrive at this result, we divided the given mass of the sheet (27.5 g) by the molar mass of copper (63.55 g/mol). This calculation allows us to convert the mass of the sheet into the corresponding number of moles of copper.
The result tells us that the 27.5 g pure copper sheet contains approximately 0.433 moles of copper atoms. This conversion to moles is useful in various chemical calculations and allows for easier comparison and analysis of quantities on a molecular scale.
for more such question on copper visit
https://brainly.com/question/29176517
#SPJ8
How many grams of C5Hg would you need to measure out to have 0.172 mol?
We would need to measure out approximately 44.84 grams of C5Hg to have 0.172 mol.
To determine the grams of C5Hg needed to have 0.172 mol, we need to use the molar mass of C5Hg and the given amount in moles. The molar mass of a compound represents the mass of one mole of that compound.
The molar mass of C5Hg can be calculated by summing the atomic masses of all the atoms in the compound:
C5Hg: (5 * atomic mass of C) + (1 * atomic mass of Hg)
Using the atomic masses from the periodic table:
Atomic mass of C = 12.01 g/mol
Atomic mass of Hg = 200.59 g/mol
Molar mass of C5Hg = (5 * 12.01 g/mol) + (1 * 200.59 g/mol) = 60.05 g/mol + 200.59 g/mol = 260.64 g/mol
Now, we can calculate the grams of C5Hg needed for 0.172 mol using the mole-to-mass conversion:
Grams of C5Hg = Moles of C5Hg * Molar mass of C5Hg
Grams of C5Hg = 0.172 mol * 260.64 g/mol = 44.84 grams (rounded to two decimal places)
For more such question on mol. visit :
https://brainly.com/question/24191825
#SPJ8
What is the chemical formula for an acid?
The speed of an electron is 1.68*10^8m/s what is the wavelength
Answer:
[tex]\lambda =4.33x10^{-12}m=4.33pm[/tex]
Explanation:
Hello there!
In this case, since the speed, wavelength and mass of an electron are related via the the Broglie wavelength:
[tex]\lambda =\frac{h}{m*v}[/tex]
Thus, by plugging in the mass of the electron and the Planck's constant, we obtain the following wavelength:
[tex]\lambda =\frac{6.626x10^{-34}J*s}{9.11x10^{-31}kg*1.68x10^{8}m/s}\\\\\lambda =4.33x10^{-12}m=4.33pm[/tex]
Best regards!
Which term describes something that displays all the characteristics of life?
a.homeostasis
b.organism
c.stimulus
d.unicellular
why is space cold ???
Because the space is ultimate thermos.
In the second step, acetylene, carbon dioxide and water react to form acrylic acid: (g)(g)(g)(g) Write the net chemical equation for the production of acrylic acid from calcium carbide, water and carbon dioxide. Be sure your equation is balanced.
Answer:
6C2H2(g) + 16H2O(g) + 3CO2(g) ------> 6Ca(OH)2(s) + 5CH2CHCO2H(g)
Explanation:
The reaction has the first step as the reaction of calcium carbide with water to yield acetylene and calcium hydroxide as follows;
6CaC2(s) + 12H2O(g) -----> 6C2H2(g) + 6Ca(OH)2(s)
In the second step, acetylene, carbon dioxide and water react to form acrylic acid as follows;
6C2H2(g) + 4H2O(g) + 3CO2(g) ------> 5CH2CHCO2H(g)
The overall reaction equation is as follows;
6C2H2(g) + 16H2O(g) + 3CO2(g) ------> 6Ca(OH)2(s) + 5CH2CHCO2H(g)
all metals rust please answer false or true
Answer:
True
Explanation:
All metals do rust but at different rates. Gold, platinum, and silver can rust if but at different rates. It can take time for it to rust, if you clean your metals, it won't rust, it'll take awhile before it rusts if you keep cleaning them.
Hopefully this helps :3 sorry if wrong :( plz mark brainiest if correct :D your bootiful/handsome! Have a great day luv <3
-Bee~
K(+1)Cl(+5)O3(-2) → K(+1)Cl(-1) + O2(0)
Answer:
Looooolllllllllllll
Explanation:
What is the question bro
2H2O → 2H2 + O2
OSynthesis
O Decomposition
O Combustion
O Single Replacement
O Double Replacement
which is the most fluorescent molecule?
What's the bond between two atoms of hydrogen?
Answer:There is a iin dipole attraction between two hydrogen atom
Explanation:
The same atoms have the ion dipole attraction between them the same atoms repel each other
what are the reasons that you cannot see many stars in the city nights?
Answer:
Because of the artificial lights influencing the dark night, turning it into a grey.
List three forms of energy.
The different types of energy include thermal energy, radiant energy, chemical energy, nuclear energy, electrical energy, motion energy, sound energy, elastic energy and gravitational energy.
you could use any of these.
Answer: Chemical energy is energy stored in the bonds of atoms and molecules. ...
Mechanical energy is energy stored in objects by tension. ...
Nuclear energy is energy stored in the nucleus of an atom—the energy that holds the nucleus together.
Explanation:
assuming fixed shape when heated?
Answer:
Assuming that the atmospheric pressure is standard, the temperature will rise steadily until it reaches 100°C
The change in time for the first quarter is
seconds.
The change in time for the second quarte 1.39
seconds.
2.07
The change in time for the third quarter is
2.18
seconds.
The change in time for the fourth quarter is
second
Answer: The change in time for the first quarter is 1.39 seconds.
The change in time for the second quarter is 0.78 seconds.
The change in time for the third quarter is 0.64 seconds.
The change in time for the fourth quarter is 0.54 seconds.
Explanation: took info from my data and completed lab
Step 5: Measure the Speed of the Toy Car on the Higher Track
Calculate the change in time for each quarter of the track. Record the change in time in Table E of your Student Guide.
Also added the other calculations -
Calculate the average time the car took to reach each checkpoint. Record the average time in Table D of your Student Guide.
The average time to the first quarter checkpoint is 1.39 seconds.
The average time to the second quarter checkpoint is 2.18 seconds.
The average time to the third quarter checkpoint is 2.82 seconds.
The average time to the finish line is 3.36 seconds.
Calculate the speed of the car at each checkpoint by dividing the distance between each checkpoint, in meters, by the change in time. Record your answers in Table E of your Student Guide.
The speed at the first quarter checkpoint is 1.09 m/s.
The speed at the second quarter checkpoint is 1.95 m/s.
The speed at the third quarter checkpoint is 2.37 m/s.
The speed at the finish line is 2.80 m/s.
Please make me Brainly..:)
If 5.32 mols N2 and 15.8 mols H2 react together, what mass NH3 can be
produced? Which is the limiting reactant?
Answer:
2.87 gram
N2 is the limiting agent
Explanation:
We will find out if there is sufficient N2 and h2 to produce NH3
a) For 2.36 grams of N2
Molar mass of N2 = 28.02
Number of moles of N2 in 2.36 grams = 2.36/28.02
Mass of NH3 = 17.034 g
Now NH3 produced form 2.36 grams of N2 =
2.36/28.02 * 2 * 17.034 = 2.87 g NH3
b) For 1.52 g of H2
NH3 produced = 1.52/2.016 * (2/3) * 17.034 = 8.56
N2 Is not enough to produce 2.87 g of NH3 and also H2 is not enough to make 8.56 g of NH3.
N2 is the limiting agent as it has smaller product mass
In fall, leaves may change from green to yellow or red. Explain in your own words what is happening inside the leaf with regard to plant pigments.
Answer:
The pigment that causes leaves to be green is chlorophyll. ... As chlorophyll goes away, other pigments start to show their colors. This is why leaves turn yellow or red in fall. In fall, plants break down and reabsorb chlorophyll, letting the colors of other pigments show through.
I a doing an exam in science pls help.
What type of energy comes from the motion of tiny particles of matter?
Answer:
heat
Explanation:
Answer:
Thermal Energy
Explanation:
HELPPPP ASAP!!! Plzzz
Answer:
420 miles
Explanation:
From the question given above, the following data were obtained:
Time = 3.5 hours
Speed = 120 mi/h
Distance =?
Speed is defined as the distance travelled per unit time. Mathematically, it is expressed as:
Speed = distance / time
With the above formula, we can obtain the distance travelled by the plane as follow:
Time = 3.5 hours
Speed = 120 mi/h
Distance =?
Speed = distance / time
120 = distance / 3.5
Cross multiply
Distance = 120 × 3.5
Distance = 420 miles
Thus, the distance travelled by the plane is 420 miles
what role does the grass play in the food web?
A. Producer B. Primary Consumer C. secondary Consumer D. Decomposer
Answer:
Producer
Explanation:
I took the test :)
A 1.om sample of dry air at
at 25°c at 786mmHg contains 0.925g Nitrogen Plus other gases including oxygen, argon and carbon dioxide. what is the partial pressure of Na with the air sample.
Answer:
Is the question not supposed to be what is the partial pressure of Nitrogen not Sodium
what blood vessels and chambers of the heart does a molecule of glucose absorbed through the gut passes on its way to an active muscle in the leg
Answer:
Blood capillaries
Explanation:
The walls of capillaries are just one cell thick. Capillaries therefore allow the exchange of molecules between the blood and the body's cells - molecules can diffuse across their walls. This exchange of molecules is not possible across the walls of other types of blood vessel.
8. If 134 L of Nitrogen gas at STP is combined with 99 L of Chlorine gas at STP,
Which is the limiting reactant?
N2 + Cl2 → NCI3
.
Answer:
Cl₂ is the limiting reactant.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
N₂ + 3Cl₂ —> 2NCl₃
From the balanced equation above,
1 L of N₂ reacted with 3 L of Cl₂.
Finally, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
1 L of N₂ reacted with 3 L of Cl₂.
Therefore, 134 L of N₂ will react with = 134 × 3 = 402 L of Cl₂.
From the calculation made above, we can see that a higher volume (i.e 402 L) of Cl₂ than what was given (i.e 99 L) is needed to react completely with 134 L of N₂.
Therefore, Cl₂ is the limiting reactant and N₂ is the excess reactant.
2 Nal + Pb(NO3)2
2 NaNO3 + Pb12
How many oxygen atoms are on the left side of the equation?
there are 6 O atoms suvdjwndje
The trait that shows up in the first generation.
Recessive
Dominant
Ok
Answer:
Dominant
Explanation:
hope this help
True or False?
Weak bases dissociate
completely into (OH)- and
metal cations.
Answer:
False
Explanation:
When weak bases dissociate, an equilibrium is established rather than dissociating 100%. So OH- and metal ions are partially ionized.
What is the volume of .80 g of O2 gas at STP?
Answer:0.56L
Explanation:Molar mass of O2=32
N=0.8/32
N=0.025
V=0.025 x 22.4=0.56L